Search results

This study has assessed the thermal performance of locally fabricated bio-based building envelopes made of coconut and corn husk composite bricks to reduce building wall heat transmission load and energy consumption towards green building adaptation.

Samples of coconut fiber (coir) and corn husk fiber bricks were fabricated and tested for their thermophysical properties using the Transient Plane Source (TPS) 2500s instrument. A simulation was conducted using Dynamic Energy Response of Building - Lunds Tekniska Hogskola (DEROB-LTH) to determine indoor temperature variation over 24 h. The time lag and decrement factor, two important parameters in evaluating building envelopes, were also determined.

The time lag of the bio-based composite building envelope was found to be in the range of 4.2–4.6 h for 100 mm thickness block and 10.64–11.5 h for 200 mm thickness block. The decrement factor was also determined to be in the range of 0.87–0.88. The bio-based composite building envelopes were able to maintain the indoor temperature of the model from 25.4 to 27.4 °C, providing a closely stable indoor thermal comfort despite varying outdoor temperatures. The temperature variation in 24 h, was very stable for about 8 h before a degree increment, providing a comfortable indoor temperature for occupants and the need not to rely on air conditions and other mechanical forms of cooling. Potential energy savings also peaked at 529.14 kWh per year.

The findings of this study present opportunities to building developers and engineers in terms of selecting vernacular materials for building envelopes towards green building adaptation, energy savings, reduced construction costs and job creation.

This study presents for the first time, time lag and decrement factor for bio-based composite building envelopes for green building adaptation in hot climates, as found in Ghana.

In Hong Kong, over 20,000 private residential buildings will be 50 plus years old by 2039. However, building maintenance has not been owners’ popular interest because of the high cost as well as the complexities in justifying whether the quantities and prices of the maintenance works are reasonable. This paper therefore aims to validate the practicality of adopting Scan-to-BIM: Terrestrial Laser Scan (TLS) and Building Information Modelling (BIM) to perform quantity take-offs (QTO) for estimating building maintenance costs.

A 64-year-old tenement building was selected to conduct a case study. In this instance, the building had undergone a Scan-to-BIM survey approach to generate QTO for the bills of quantities for external painting works. The Scan-to-BIM approach includes site visit, positioning of scanning equipment, assignment of circular scan routes, point cloud registration and identification of residual error. After that, time, cost and quality data were logged into contrast with QTO on as-built plans for external wall plastering works.

The “time”, “cost” and “quality” of the Scan-to BIM practice were then examined and compared with the prevailing practices of manual measurements on as-built drawings. As noted from the results, the initial cost of Scan-to BIM is high, owing to the cost of equipment, software and capable available operators. However, the authors identified that the time and cost can be significantly minimised by developing and implementing efficient practices such as preparing a detailed scan plan, equipping modeller with quantity surveying knowledge, using automated object recognition and 5D BIM software packages such as Vico Office and CostX.

The upshot is that Scan-to-BIM could be one of the measures to advance the clarity in the QTO and estimated price of the maintenance projects.

The practicability of Scan-to-BIM has received limited attention on existing building maintenance project. The Scan-to-BIM approach was examined using a case building of a 64-year-old tenement building. The approach demonstrated in this research study is promised to advance the clarity in the QTO and estimated price of maintenance project.

This systematic review paper aims to investigate seasonal ambient change’s impact on the incidence of falls among older adults.

The population, exposure, outcome (PEO) structured framework was used to frame the research question prior to using the Preferred Reporting Items for Systematic Reviews and Meta-Analysis framework. Three databases were searched, and a total of 12 studies were found for inclusion, and quality appraisal was carried out. Data extraction was performed, and narrative analysis was carried out.

Of the 12 studies, 2 found no link between seasonality and fall incidence. One study found fall rates increased during warmer months, and 9 of the 12 studies found that winter months and their associated seasonal changes led to an increase in the incidence in falls. The overall result was that cooler temperatures typically seen during winter months carried an increased risk of falling for older adults.

Additional research is needed, most likely examining the climate one lives in. However, the findings are relevant and can be used to inform health-care providers and older adults of the increased risk of falling during the winter.

This study aims to focus on how smartphone addiction impacts young consumer behavior related to mobile technology (i.e. the compulsive app downloading tendency). After a thorough literature review and following the risk and protective factors framework, this study explores factors that could mitigate its effects (resilience, family harmony, perceived social support and social capital).

The study used the covariance-based structural equation modeling approach to analyze data collected from 275 Generation Z (Gen Z) smartphone users in Spain.

Results suggest that resilience is a critical factor in preventing smartphone addiction, and smartphone addiction boosts the compulsive app downloading tendency, a relevant downside for younger Gen Z consumers.

Through the lens of the risk and protective factors framework, this study focuses on protective factors to prevent smartphone addiction and its negative side effects on app consumption. It also offers evidence of younger consumers’ vulnerability to smartphone addiction, not because of the device itself but because of app-consumption-related behaviors.

Green roofs are strategies for the ecological intensification of cities and a measure of meeting some of the sustainable development goals (SDGs). They have widely been adopted as an adaptation strategy against an urban heat island (UHI). However, they are conventionally soil-based making it difficult and expensive to adopt as a strategy for greening existing buildings (GEB). This paper, therefore, develops a novel green roof system using climbers for thermal-radiative performance. The paper explores the vitality of climbing species as a nature-based strategy for GEB, and for the ecological improvement of the predominantly used cool roofs in sub-Saharan Africa (SSA).

Simulation for the same building Kejetia Central Market (KCM) Redevelopment; the existing aluminium roof (AL), soil-based extensive green roof (GR1) and the proposed green roof using climbing plants (GR2) were performed using ENVI-met. The AL and GR1 were developed as reference models to evaluate and compare thermal-radiative performance of the conceptual model (GR2). The long wave radiation emission (Q_lw), mean radiant temperature (MRT) and outdoor air temperature (T_a) of all three roofing systems were simulated under clear sky conditions to assess the performance and plant vitality considering water access, leaf temperature (T_f) and latent heat flux (LE₀) of GR1 and GR2.

There was no short wave radiation (Q_sw) absorption at the GR2 substrate since the climbers have no underlying soil mass, recording daily mean average Q_lw emission of 435.17 Wm⁻². The soil of GR1, however, absorbed Q_sw of 390.11 Wm⁻² and a Q_lw emission of 16.20 wm⁻² higher than the GR2. The AL recorded the lowest Q_lw value of 75.43 Wm⁻². Also, the stomatal resistance (r_s) was higher in GR1 while GR2 recorded a higher average mean transpiration flux of 0.03 g/sm³. This indicates a higher chance of survival of the climbers. The T_a of GR2 recording 0.45°C lower than the GR1 could be a good UHI adaptation strategy.

No previous research on climbers for green roof systems was found for comparison, so the KCM project provided a unique confluence of dynamic events including the opportunity for block-scale impact assessment of the proposed GEB strategy. Notwithstanding, the single case study allowed a focussed exploration of the novel theory of redefining green roof systems with climbers. Moreover, the simulation was computationally expensive, and engaging multiple case studies were found to be overly exhaustive to arrive at the same meaningful conclusion. As a novelty, therefore, this research provides an alternative theory to the soil-based green roof phenomenon.

The thermal-radiative performance of green roofs could be improved with the use of climbers. The reduction of the intensity of UHI would lead to improved thermal comfort and building energy savings. Also, very little dependence on the volume of soil would require little structural load consideration thereby leading not only to cheaper green roof construction but their higher demand, adoption and implementation in SSA and other low-income economies of the global south.

The reduction of the consumption of topsoil and water for irrigation could avoid the negative environmental impacts of land degradation and pollution which have a deleterious impact on human health. This fulfils SDG 12 which seeks to ensure responsible consumption of products. This requires the need to advance the research for improvement and training of local built environment practitioners with new skills for installation to ensure social inclusiveness in the combat against the intractable forces of negative climate impacts.

Climbers are mostly known for green walls, but their innovative use for green roof systems has not been attempted and adopted; it could present a cost-effective strategy for the GEB. The proposed green roof system with climbers apart from becoming a successful strategy for UHI adaptation was also able to record an estimated 568% savings on topsoil consumption with an impact on the reduction of pollution from excavation. The research provides an initial insight into design options, potentials and limitations on the use of climbers for green roofs to guide future research and experimental verification.

The purpose of this study is to investigate the physical, ultraviolet (UV), colour appearance and colour fastness properties of selected fabrics dyed with natural dyes from Daboya and Ntonso communities of Ghana. The study further highlights the rich cultural heritage of traditional dyeing from these two communities. Craftsmen in West Africa especially Ghana, have sustained the traditional dyeing methods to produce textile products for consumers.

In this study, two sample fabrics were purchased from craftsmen at Ntonso and Daboya communities in Ghana. These fabrics were analysed at the laboratory under standard test methods for their physical, UV, colour appearance and colour fastness properties.

Results showed that all the sample fabrics have good UV shielding performance (ratings above 50+). Daboya sample fabrics (dyed with indigo dyes) produced more colour stains than the sample fabrics from Ntonso (dyed with black “kuntunkuni” dyes). The K/S_sum value or colour yield reduced after washing but that alternatively increased the calculated ultraviolet protection factor.

Findings from this study exposed the unique UV performance of dyed traditional fabrics (using natural dyes) from Ntonso and Daboya communities in Ghana. This inspires and enforces the need for craftsmen to improve their production cycle to produce these fabrics in different sizes which provides the necessary UV shielding abilities for consumers in the wake of climate changes.

This study demonstrated that the natural dyeing process at the two communities produced relatively good UV and colour fastness properties of the sample fabrics. These eco-friendly dyeing practices have survived over time to maintain and promote the concept of sustainability within the textile and fashion industry in Ghana.

This paper aims to examine why retail firms seldom achieve full integration of online and offline channels as prescribed in omni-channel literature. It examines the intermediate process of channel integration from an internal, operational perspective.

This study is composed of two parts. In the first part, the authors interviewed informants from nine firms that were engaged in channel integration. In the second part, the authors conducted case studies with three firms from the cosmetics and skincare industry against the backdrop of the COVID-19 pandemic to find evidence to support or negate the propositions made in the first part.

The first part identified six operational challenges to channel integration. The authors categorized these challenges into two groups: inter-channel communication and inter-channel competition. Inter-channel competition carries more weight at the latter stage of integration. The authors also identified two antecedents that affect the seriousness of these challenges: heterogeneity among channels in business operation and external competitive pressure. In the second part, the authors found that both inter-channel communication and inter-channel competition were improved because of the external competitive pressure exerted by the COVID-19 pandemic. However, the heterogeneity of offline channels against online channels in business operation is a double-edged sword.

The study identifies the changing effects of the challenges of channel integration and their antecedents in the midst of integration. The positive influence of a specific dimension of channel heterogeneity against other channels increases and then decreases along channel integration. The identification of the changing effects lays the foundation for a finer stage model of channel integration.

This study analyzes the evolution of topics related to COVID-19 on Chinese social media platforms with the aim of identifying changes in netizens' concerns during the different stages of the pandemic.

In total, 793,947 posts were collected from Zhihu, a Chinese Question and Answer website, and Dingxiangyuan, a Chinese online healthcare community, from 31 December, 2019, to 4 August, 2021. Topics were extracted during the prodromal and outbreak stages, and in the abatement–resurgence cycle.

Netizens' concerns varied in different stages. During the prodromal and outbreak stages, netizens showed greater concern about COVID-19 news, the impact of COVID-19 and the prevention and control of COVID-19. During the first round of the abatement and resurgence stage, netizens remained concerned about COVID-19 news and the prevention and control of the pandemic, however, less attention was paid to the impact of COVID-19. During later stages, popularity grew in topics concerning the impact of COVID-19, while netizens engaged more in discussions about international events and the raising of spirits to fight the global pandemic.

This study contributes to the practice by providing a way for the government and policy makers to retrospect the pandemic and thereby make a good preparation to take proper measures to communicate with citizens and address their demands in similar situations in the future.

This study contributes to the literature by applying an adapted version of Fink's (1986) crisis life cycle to create a five-stage evolution model to understand the repeated resurgence of COVID-19 in Mainland China.

To date, little research has been undertaken to test the effectiveness of team coaching, with past work focusing on models, frameworks and competencies. This study aimed to examine the effectiveness of team coaching within real world organizational teams and its impact on individual perceptions of team cohesion and psychological safety.

A randomized control trial (RCT) using the comparable interventions: (1) team coaching (intervention) and (2) team facilitation (control) was employed with multiple teams and multiple facilitators, measuring the impact on team cohesion and psychological safety.

The data indicate participants engaging in the team coaching intervention made greater gains in terms of their individual perceptions of psychological safety and team cohesion than individuals who received the team facilitation intervention (T1–T2).

Facilitators should apply a team coaching approach when seeking to address issues of cohesion and psychological safety within workplace teams.

This study provides the first evidence, using an RCT method, of the effectiveness of team coaching as a workplace intervention for enhancing individual perceptions of psychological safety and team cohesion.

Understanding the adoption of m-commerce in small and medium-sized enterprises (SMEs) is critical for their sustainable development. This study aims to investigate the adoption of m-commerce in Vietnamese SMEs, leading to the identification of the critical determinants and their relative importance for m-commerce adoption.

An integrated model is developed by combining the diffusion of innovation theory and the technology–organization–environment framework. Such a model is then tested and validated using structural equation modeling and artificial neural networks in analyzing the survey data.

The study indicates that perceived security is the most critical determinant for m-commerce adoption. It further shows that customer pressure, perceived compatibility, organizational innovativeness, perceived benefits, managers’ IT knowledge, government support and organizational readiness all play a critical role in the adoption of m-commerce in Vietnamese SMEs.

The findings of this study can lead to the formulation of better strategies and policies for promoting the adoption of m-commerce in Vietnamese SMEs. Such findings are also of practical significance for the diffusion of m-commerce in SMEs in other developing countries.

To the best of the authors’ knowledge, this is the first attempt to explore the adoption of m-commerce in Vietnamese SMEs using a hybrid approach. The application of this approach can lead to better understanding of the relative importance of the critical determinants for the adoption of m-commerce in Vietnamese SMEs.