Search results

The purpose of this paper is to investigate the effect of the replacement of natural coarse aggregate (NCA) with different percentages of recycled coarse aggregate (RCA) on properties of low calcium fly ash (FA)-based geopolymer concrete (GPC) cured at oven temperature. Further, this paper aims to study the effect of partial replacement of FA by ground granulated blast slag (GGBS) in GPC made with both NCA and RCA cured under ambient temperature curing.

M25 grade of ordinary Portland cement (OPC) concrete was designed according to IS: 10262-2019 with 100% NCA as control concrete. Since no standard guidelines are available in the literature for GPC, the same mix proportion was adopted for the GPC by replacing the OPC with 100% FA and W/C ratio by alkalinity/binder ratio. All FA-based GPC mixes were prepared with 12 M of sodium hydroxide (NaOH) and an alkalinity ratio, i.e. sodium hydroxide to sodium silicate (NaOH:Na₂SiO₃) of 1:1.5, subjected to 90^°C temperature for 48 h of curing. The NCA were replaced with 50% and 100% RCA in both OPC and GPC mixes. Further, FA was partially replaced with 15% GGBS in GPC made with the above percentages of NCA and RCA, and they were given ambient temperature curing with the same molarity of NaOH and alkalinity ratio.

The workability, compressive strength, split tensile strength, flexural strength, water absorption, density, volume of voids and rebound hammer value of all the mixes were studied. Further, the relationship between compressive strength and other mechanical properties of GPC mixes were established and compared with the well-established relationships available for conventional concrete. From the experimental results, it is found that the compressive strength of GPC under ambient curing condition at 28 days with 100% NCA, 50% RCA and 100% RCA were, respectively, 14.8%, 12.85% and 17.76% higher than those of OPC concrete. Further, it is found that 85% FA and 15% GGBS-based GPC with RCA under ambient curing shown superior performance than OPC concrete and FA-based GPC cured under oven curing.

The scope of the present paper is limited to replace the FA by 15% GGBS. Further, only 50% and 100% RCA are used in place of natural aggregate. However, in future study, the replacement of FA by different amounts of GGBS (20%, 25%, 30% and 35%) may be tried to decide the optimum utilisation of GGBS so that the applications of GPC can be widely used in cast in situ applications, i.e. under ambient curing condition. Further, in the present study, the natural aggregate is replaced with only 50% and 100% RCA in GPC. However, further investigations may be carried out by considering different percentages between 50 and 100 with the optimum compositions of FA and GGBS to enhance the use of RCA in GPC applications. The present study is further limited to only the mechanical properties and a few other properties of GPC. For wider use of GPC under ambient curing conditions, the structural performance of GPC needs to be understood. Therefore, the structural performance of GPC subjected to different loadings under ambient curing with RCA to be investigated in future study.

The replacement percentage of natural aggregate by RCA may be further enhanced to 50% in GPC under ambient curing condition without compromising on the mechanical properties of concrete. This may be a good alternative for OPC and natural aggregate to reduce pollution and leads sustainability in the construction.

This study presents a comprehensive investigation of turnover intention within the context of higher education, specifically focusing on private universities in Egypt, to develop a robust conceptual framework to explore this phenomenon.

The study sample comprised both male and female tenured faculty members from private universities, and data were collected through questionnaires, resulting in 396 completed responses. Statistical analysis was conducted using SPSS and partial least squares structural equation modeling (PLS-SEM) software.

The study highlights the significant impact of work-life balance (WLB) and organizational commitment on turnover intention, with job satisfaction as a mediating factor. Additionally, the research reveals that emotional intelligence (EI) does not directly influence turnover intention, but its effects are fully mediated by job satisfaction.

This research not only advances the theoretical understanding of why academics contemplate leaving their positions but also underscores the significance of this topic. Moreover, by exploring turnover intention in the private education sector of the Middle East, the study addresses a notable gap in the existing literature.

Despite the considerable increase in research on entrepreneurship education, few studies examine the role of entrepreneurship educators. Similarly, most frameworks from entrepreneurship education recognize the educator’s importance in facilitating instruction and assessment, but the factors influencing the educator role are not well understood. According to the identity theory, personal factors including self-efficacy, job satisfaction and personal values influence the perspective of self, significance and anticipations that an individual in this role associates with it, determining their planning and actions. The stronger the role identity the more likely entrepreneurship educators will be in effectively developing their entrepreneurial skills as well as the overall learning experience of their students. The objective of this study is to pinpoint the factors that affect entrepreneurial role identity.

Drawing upon the identity theory, this study developed a theoretical framework and carried out an empirical investigation involving a survey of 289 entrepreneurship educators across the globe. Structural equation modeling (SEM) technique was applied to analyze and explore the factors that impact the identity of the educators in their role as entrepreneurship teachers.

The findings show that the role identity of entrepreneurship educators is significantly influenced by their self-efficacy, job satisfaction and personal values. Among these factors, self-efficacy and job satisfaction have the most significant impacts on how educators perceive their role. The implications of these results and directions for future research are also discussed.

The novelty of the current study is derived from its conceptualization of the antecedents of role perception among entrepreneurship educators. This study stands out as one of the earliest attempts to investigate the factors that shape an individual’s scene of self and professional identity as an entrepreneurship educator. The significance of comprehending the antecedents of role perception lies in the insights it can offer into how educators undertake and execute their role, and consequently, their effectiveness in teaching entrepreneurship.

This study examines the influence of consumer skepticism on cause-related marketing (CRM) campaign participation intentions of Generation Z consumers from emerging market perspective. This study was undertaken due to the paucity of relevant literature in the public domain to directly investigate whether and how consumers' skepticism affects CRM participation intentions, specifically in the luxury retailing context.

A survey was conducted among 552 Generation Z consumers and path analysis was used to examine the direct and indirect effects of skepticism. The mediation and moderation analysis was used to explore and test the authors' hypotheses via partial least squares structural equation modeling (PLS SEM).

The authors' findings provide empirical evidence that corporate social responsibility, religiosity and cause involvement positively affects consumer participation intentions, and this link is also established indirectly through skepticism toward the CRM campaign. These findings provide novel theoretical contributions by establishing skepticism's complex role in determining the CRM participation intention in the Generation Z consumers' context. This study further demonstrates the moderating effect of gender and luxury store format on consumer skepticism and CRM participation intentions.

The Generation z group will represent a quarter of the Asia–Pacific region's population by 2025. However, little is known about Generation z consumers' CRM participation intentions. This research would help practitioners, including luxury retailers, CRM managers and advertising professionals, to effectively design CRM campaigns. The paper contributes by highlighting the theoretical implications and managerial implications based on the current findings in the emerging market context.

Nursing students encounter a combination of academic rigor, clinical demands and emotional hurdles. Juggling coursework, practical training and patient interaction can be stressful, and exposure to such situations may impact their psychological well-being. This study aims to highlight the top strengths among nursing students and identify the strengths associated with well-being.

Convenience sampling was used to select a sample of 150 nursing students studying in first, second and third year from colleges of Gujarat and Rajasthan. Students were administered the Values In Action character strengths inventory, the satisfaction with life scale and scale of positive and negative experience. Data was analyzed using descriptive statistics and correlation.

Results show that among nursing students, kindness emerged as the foremost strength with the highest mean, followed by honesty, creativity, spirituality and teamwork, and the strengths of curiosity, gratitude, perseverance, self-regulation, social intelligence, and zest were positively associated with life satisfaction and positive emotions and negatively related to negative emotions.

The small sample size was a limitation; however, this study has been conducted at different locations to improve generalizability.

This study has profound implications for nursing students, both in their personal development and their future roles as health-care professionals, as fostering these attributes can contribute to the students’ growth, well-being and effectiveness as compassionate and competent caregivers. Working on strengths is associated with well-being; therefore, using strengths identified by this study will have a beneficial effect on the students’ well-being.

Curiosity and social intelligence, for instance, can help nurses better understand patient needs and emotions, developing strengths like perseverance and self-regulation can equip nursing students with tools to cope effectively with the challenges inherent in health-care settings. Traits such as gratitude and social intelligence can enhance communication and empathy which are vital skills for establishing rapport with patients and their families. Emphasizing teamwork as a strength aligns with the collaborative nature of health care. By embodying values like kindness and spirituality, nursing students can create a more compassionate and meaningful experience for patients, as well as themselves.

The research paper identifies and emphasizes the five character strengths that are most commonly observed in a sample of Indian nursing students. In addition, this study delves deeper into these identified strengths to understand how they relate to the overall well-being of nursing students within this specific population. The existing literature has not explored it exhaustively.

Social commerce (s-commerce) has gained widespread popularity as a social platform where customers engage in resource-sharing activities such as information exchange, advice-seeking and expressing their opinions on mutual interests. However, existing studies have not fully comprehended the drivers of electronic customer-to-customer interaction (eCCI) and how such behavior contributes to the customer “stick” on s-commerce sites. This study develops the Motivation–Opportunity–Ability (MOA) theory and investigates the impact of MOA factors on eCCI, which in turn affects customer stickiness.

A survey was used to acquire data from 455 valid respondents, and the research employed a combination of fuzzy-set qualitative comparative analysis (fsQCA) and structural equation modeling.

The results revealed associations between perceived self-efficacy, intrinsic motivation, tie strength with other customers, eCCI and customer stickiness.

Considering the limited availability of complete eCCI frameworks in existing scholarly works, the authors present valuable perspectives on the role of consumer characteristics as both antecedents and consequences of eCCI. Additionally, this study proposes a research agenda for the field of eCCI on s-commerce sites.

The role of labor unions in relation to corporate social responsibility (CSR) remains both ambiguous and crucial for union members and business leaders. Given the complex relationship between labor unions and corporations, this study aims to address whether labor unions keep corporations honest (by monitoring CSR activities) or potentially render CSR initiatives less necessary.

Using data from the MSCI Kinder, Lydenberg, Domini Database for firms in the Russell 1000 Index, this study examines the link between labor unions and CSR in U.S. companies over a six year period. Generalized least squares models were used to test the hypotheses for 3,937 firm-year observations.

The findings show that unionized companies generally pay less attention to CSR compared to nonunionized ones. The presence of labor unions and positive union-management relations both show a significant negative impact on CSR ratings, where positive union-management relations negatively affect CSR ratings more than just the presence of labor unions. Further, when considering the environmental, social and governance aspects of CSR separately, the results are more complex, suggesting that the relationship between labor unions and CSR varies depending on specific ESG dimensions.

CSR, a well-researched area, rarely addresses the companies' relationships with labor unions. Studies in South Korea and the UK have touched on the impact of labor unions on CSR, but in the USA it remains unexplored. This study extends this line of work by examining U.S. companies.

The purpose of this paper is to improve the productivity and quality of the wire arc additive manufacturing process by benchmarking the strategies from the selected six strategies, namely, heat treatment process, inter pass cooling process, inter pass cold rolling process, peening process, friction stir processing and oscillation process.

To overcome the lack of certainty associated with correlations and relationships in quality functional deployment, fuzzy numbers have been integrated with the quality functional deployment framework. Twenty performance measures have been identified from the literature under five groups, namely, mechanical properties, physical properties, geometrical properties, cost and material properties. Using house of quality weights are allocated to performance measures and groups, relationships are established between performance measures and strategies, and correlations are assigned between strategies. Finally, for each strategy, relative importance, score and crisp values are calculated.

Inter pass cold rolling process strategy is computed with the highest crisp value of 15.80 which is followed by peening process, heat treatment process, friction stir processing, inter pass cooling process,] and oscillation process strategy.

To the best of the authors’ knowledge, there has been no research in the literature that analyzes the strategies to improve the quality and productivity of the wire arc additive manufacturing process.

This study aims to examine whether and why subsidiary-unit managers’ prior international work experiences across multinational enterprises’ (MNEs) home and host countries impact their subsidiary-unit performance, considering the mediating effect of their advice networks.

A survey on 222 subsidiary-unit managers (154 parent country nationals [PCNs] and 68 host country nationals [HCNs]) of a Korean MNE operating in China, Vietnam, Thailand, Singapore, Hungary and Slovakia was conducted. The authors analyzed the data using partial least square structural equation modeling, multigroup analysis and bootstrapping techniques.

PCN subsidiary managers with more prior international work experience manage better-performing units due to the strength of the manager’s advice networks across local parties. However, for HCN subsidiary managers, this study did not find such mediating roles of the size and strength of their advice networks in the MNE home country.

This study provides novel insights and empirical evidence about the effect of the length of prior international work experience of subsidiary managers on their advice-seeking networks and subsidiary-unit performance. In addition, it draws on and add to social capital theory about how international work experience impacts dealing with local businesses and the relationship with corporate headquarters.

Sharing project information is critical for the success of medical crowdfunding campaigns. However, few users share medical crowdfunding projects on their social networks, and the sharing behavior of medical crowdfunding projects on social networking sites has not been well studied. Therefore, this study explored the factors and potential mechanisms influencing users’ sharing behaviors on networking sites.

A research model was developed based on the attribution-affect model of helping and social capital theory. Data were collected using a longitudinal survey. Partial least squares structural equation modeling was used to analyze the collected data. We conducted post hoc analyses to validate the results of the quantitative analysis.

The analysis results verified the effects of perceived external attribution, perceived uncontrollable attributions, and perceived unstable attributions on sympathy and identified the effect of sympathy and social characteristics of medical crowdfunding users on sharing behavior.

This research provides a comprehensive theoretical understanding of users’ sharing behavior characteristics and provides implications for enhancing the efficiency of medical crowdfunding activities.