Search results

This study aims to find the best location for constructing green energy facilities in India and reducing CO₂ emissions. Incorporating green energy is a priority for many countries under the Paris Agreement. This task is challenging due to factors that affect implementation, and making the wrong decision wastes resources. India’s goals are net-zero emissions by 2070 and 50% renewable electricity by 2030. Other developing nations should emulate India’s renewable energy strategy. India ranks fourth in renewable energy and wind power, and fifth in solar power capacity. This research aims to identify the best locations in India for implementing green energy projects.

To identify the optimal green energy implementation sites in India, this research uses the hybrid multicriteria decision analysis (MCDA) in an uncertain environment. This research uses the Delphi method to identify the most suitable green energy implementation sites in India. It adapts the elements for this investigation. In addition, the utilization of the Fermatean fuzzy weighted aggregated sum product assessment technique is implemented to effectively prioritize the factors that impact the selection of these sites. This study used the MEREC method (method based on the removal effects of criteria) to identify the most suitable areas in India for implementing green energy. The highest accuracy is attained through the amalgamation of these hybrid methods.

Following the computation data by hybrid MCDA in uncertainty environment, NP Kunta in Andhra Pradesh emerges as the recommended green energy site among the 11 considered. Also among the factors political strategies and objectives hold the highest priority among them.

This study is pioneering in its efforts to provide a comprehensive perspective on the development and management of green energy operations in India. The study proves advantageous for diverse sites in the successful adoption and management of green energy. The study is additionally valuable in informing policy development aimed at promoting the use of green energy by employees through the utilization of MCDA methods in uncertain environments.

Purpose: Green consumerism is on the rise in the 21st century, impelling businesses to prioritise environmental awareness and expand eco-products to keep up with the growing demand. This research examines how social media (SM) and moral obligations (MO) affect consumer views and their propensity to make eco-friendly choices.

Methodology: Data were gathered from 508 participants using an adaptive questionnaire. The proposed model was tested using ‘structural equation modelling’.

Findings: The results show that electronic word-of-mouth (EWOM) and the intent to acquire green goods favourably impact consumer behaviour. MO positively influences attitudes and intentions to make green purchases (GPI), with attitudes acting as a mediator between MO and GPI.

Implications: This research is of utmost importance for marketers wanting to enhance their SM communication strategies to influence consumers’ opinions of green products and raise the possibility that they would make environmentally conscious purchases.

The purpose of this study is to develop black pigmented ceramic stoneware bodies that integrate various aspects of material composition and color potential. Recent research has explored black pigmented calcium aluminosilicate glass (BPCG), a specialized material known for its unique properties, which holds promise for transforming the color capabilities of traditional ceramics.

In this investigation, initially composite ceramic sample (B-1) was prepared by milling process prior to sieve analysis to attain the particle size within 44 microns. Microanalysis and morphology and thermography were studied by energy-dispersive X-ray spectroscopy, scanning electron microscope and thermogravimetric analysis and found Sample-B-1 received attractive properties like firing shrinkage, porosity, bulk density and firing strength along with good pyro-plastic properties at various temperatures like 950°C, 1050°C, 1000°C and 1180°C. Furthermore, BPCG-assisted pigmented ceramic composites were synthesized with B-1 matrix. CIE lab investigation of the attributed composites (C-series) within selective soaking range of 5–20 min was performed, and the investigation found that prominent black hue appeared (L: 24.09, a*: −0.17, b*: −0.49) for C-10 containing appeared phases of Di-Co-Silicide (26%), Ni-Chromite, Stilpnomelane (rich in iron) as obtained by X-ray diffraction studies.

Ceramic material played a significant role in the realms of art and craft, as well as in technology. The artistic facet reveals concepts or ornamentation, while the craft echoes both traditional and functional appeal. Technology, on the other hand, involves the logical implementation behind the creation.

This C-10 Sample comprised the lower percentage of mullite which attributed that the BPCG homogeneously mixed in the matrix of base (B-1) and appeared as spinal staff. Therefore, BPCG was a potential candidate for ceramic metallization, and this traditional metallization processes often faced some challenges like uniformity and mixing in the ceramic composite domain practices. This study aimed to open up new avenues for artistic decoration and bridging the gap between traditional craftsmanship and modern technology. Furthermore, BPCG’s role in color assessment through shocking techniques added an exciting concept for the ceramic practitioners, designers or ceramic educators.

Fused deposition modeling (FDM) nowadays offers promising future applications for fabricating not only thermoplastic-based polymers but also composite PLA/Metal alloy materials, this capability bridges the need for metallic components in complex manufacturing processes. The research is to explore the manufacturability of multi-metal parts by printing green bodies of PLA/multi-metal objects, carrying these objects to the debinding process and varying the sintering parameters.

Three different sample types of SS316L part, Inconel 718 part and bimetallic composite of SS316L/IN718 were effectively printed. After the debinding process, the printed parts (green bodies), were isothermally sintered in non-vacuum chamber to investigate the fusion behavior at four different temperatures in the range of 1270 °C−1530 °C for 12 h and slowly cooled in the furnace. All samples was assessed including geometrical assessment to measure the shrinkage, characterization (XRD) to identify the crystallinity of the compound and microstructural evolution (Optical microscopy and SEM) to explore the porosity and morphology on the surface. The hardness of each sample types was measured and compared. The sintering parameter was optimized according to the microstructural evaluation on the interface of SS316L/IN718 composite.

The investigation indicated that the de-binding of all the samples was effectively succeeded through less weight until 16% when the PLA of green bodies was successfully evaporated. The morphology result shows evidence of an effective sintering process to have the grain boundaries in all samples, while multi-metal parts clearly displayed the interface. Furthermore, the result of XRD shows the tendency of lower crystallinity in SS316L parts, whilst IN718 has a high crystallinity. The optimal sintering temperature for SS316L/IN718 parts is 1500 °C. The hardness test concludes that the higher sintering temperature gives a higher hardness result.

This study highlights the successful sintering of a bimetallic stainless steel 316 L/Inconel 718 composite, fabricated via dual-nozzle fused deposition modeling, in a non-vacuum environment at 1500 °C. The resulting material displayed maximum hardness values of 872 HV for SS316L and 755.5 HV for IN718, with both materials exhibiting excellent fusion without any cracks.

Green financial technology (FinTech) has received attention for promoting green finance investment and sustainable development. However, how consumer social responsibility and long-term orientation influence the continuance intention of green FinTech users remains unknown in the literature. To fill this gap, consumer social responsibility and long-term orientation are combined with the unified theory of acceptance and use of technology to develop a research model to investigate their moderating effects on the continuance intention of green FinTech users.

A random probability sampling method was adopted, and 377 valid responses were collected to verify the proposed model. Partial least squares structural equation modeling was employed for the data analysis.

Performance expectancy, effort expectancy, social influence and facilitating conditions have significant positive impacts on the continuance intentions of green FinTech users. Surprisingly, consumer social responsibility enhances the effects of performance expectancy and social influence on continuance intention but negatively moderates the effect of facilitating conditions on continuance intention. Moreover, a long-term orientation can increase the impact of facilitating conditions on continuance intention but decrease the impact of performance expectancy on continuance intention.

This paper proposes a research model that reveals how consumer social responsibility and long-term orientation moderate the relationship between the unified theory of acceptance and use of technology (UTAUT) and the continuance intention of green FinTech users to fill a gap in the literature.

This study aims to develop multifunctional, namely, superhydrophobic, flame-retardant and antibacterial, coatings over cotton fabric, using casein as green-based flame-retardant and silver nanoparticles as antibacterial agent by solution immersion method.

The cotton fabric is first coated with casein to make it flame-retardant. AgNPs synthesized using Cinnamomum zeylanicum bark extract is coated over the casein layer. Finally, stearic acid is used to coat the cotton to make it superhydrophobic. X-ray diffraction, transmission electron microscopy analysis and ultraviolet-visible spectroscopy are used to investigate the produced AgNPs. The as-prepared multifunctional cotton is characterized by scanning electron microscopy, energy dispersive X-ray analysis and attenuated total reflection-infrared studies. Flame test, limiting oxygen index test and thermogravimetric analyzer studies have also been performed to study the flame-retardant ability and thermal stability of treated fabric, respectively. The antibacterial effect of the coatings is evaluated by disc-diffusion technique. Water contact angle is determined to confirm the superhydrophobic nature of cotton fabric.

The outcomes of this study showed that the prepared multifunctional cotton fabric had maximum contact angle of greater than 150° with good flame retardancy, high thermal stability, greater washing durability and high antibacterial activity against the growth of Pseudomonas aeruginosa and Acinetobacter indicus. Additionally, the as-prepared superhydrophobic cotton showed an excellent oil–water separation efficiency.

The trilayered multifunctional cotton fabric has limiting washing durability up to 20 washing cycles. Treated functional fabric can be used as an antibacterial, therapeutic, water repellent and experimental protective clothing for medical, health care, home curtains and industrial and laboratory purposes.

The study brings out the robustness of this method in the development of multifunctional cotton fabrics.

This chapter of the book aims to introduce multiobjective linear programming (MLP) as an optimum tool to find the best quality engineering techniques (QET) in the main domains of supply chain management (SCM). The importance of finding the best quality techniques in SCM elements in the shortest possible time and at the least cost allows all organizations to increase the power of experts’ analysis in supply chain network (SCN) data under cost-effective conditions. In other words, this chapter aims to introduce an operations research model by presenting MLP for obtaining the best QET in the main domains of SCM. MLP is one of the most determinative tools in this chapter that can provide a competitive advantage. Under goal and system constraints, the most challenging task for decision-makers (DMs) is to decide which components to fund and at what levels. The definition of a comprehensive target value among the required goals and determining system constraints is the strength of this chapter. Therefore, this chapter can guide the readers to extract the best statistical and non-statistical techniques with the application of an operations research model through MLP in supply chain elements and shows a new innovation of the effective application of operations research approach in this field. The analytic hierarchy process (AHP) is a supplemental tool in this chapter to facilitate the relevant decision-making process.

Material extrusion (ME) is a low-cost additive manufacturing (AM) technique that is capable of producing metallic components using desktop 3D printers through a three-step printing, debinding and sintering process to obtain fully dense metallic parts. However, research on ME AM, specifically fused filament fabrication (FFF) of 316L SS, has mainly focused on improving densification and mechanical properties during the post-printing stage; sintering parameters. Therefore, this study aims to investigate the effect of varying processing parameters during the initial printing stage, specifically nozzle temperatures, T_n (190°C–300°C) on the relative density, porosity, microstructures and microhardness of FFF 3D printed 316L SS.

Cube samples (25 x 25 x 25 mm) are printed via a low-cost Artillery Sidewinder X1 3D printer using a 316L SS filament comprising of metal-polymer binder mix by varying nozzle temperatures from 190 to 300°C. All samples are subjected to thermal debinding and sintering processes. The relative density of the sintered parts is determined based on the Archimedes Principle. Microscopy and analytical methods are conducted to evaluate the microstructures and phase compositions. Vickers microhardness (HV) measurements are used to assess the mechanical property. Finally, the correlation between relative density, microstructures and hardness is also reported.

The results from this study suggest a suitable temperature range of 195°C–205°C for the successful printing of 316L SS green parts with high dimensional accuracy. On the other hand, T_n = 200°C yields the highest relative density (97.6%) and highest hardness (292HV) in the sintered part, owing to the lowest porosity content (<3%) and the combination of the finest average grain size (∼47 µm) and the presence of Cr23C6 precipitates. However, increasing T_n = 205°C results in increased porosity percentage and grain coarsening, thereby reducing the HV values. Overall, these outcomes suggest that the microstructures and properties of sintered 316L SS parts fabricated by FFF AM could be significantly influenced even by adjusting the processing parameters during the initial printing stage only.

This paper addresses the gap by investigating the impact of initial FFF 3D printing parameters, particularly nozzle temperature, on the microstructures and physical characteristics of sintered FFF 316L SS parts. This study provides an understanding of the correlation between nozzle temperature and various factors such as dimensional integrity, densification level, microstructure and hardness of the fabricated parts.

As a commonly engine coolant, ethylene glycol can produce corrosive acid byproducts at high temperatures when the car is running, specifically oxalic acid (OA), which can shorten the service life of engine. At the same time, chloride ions can also be introduced during coolant preparation processes. Therefore, this paper aims to investigate the synergistic corrosion behavior of Cl⁻ and OA on ADC12 aluminum alloy.

The electrochemical tests, scanning electron microscopy, energy dispersive spectrometer, X-ray diffraction and X-ray photoelectron spectroscopy) were used.

The results showed that the corrosion rate of the aluminum alloy increased with the increase of OA and Cl⁻ concentrations. After adding Cl⁻, the surface film of the aluminum alloy was further damaged, Cl⁻ has a synergistic effect with OA and their interaction further accelerated the corrosion of the aluminum alloy. Nevertheless, as the immersion time increased, the corrosion rate of the aluminum alloy gradually diminished due to the formation of aluminum oxalate.

The corrosion of ADC12 aluminum alloy was studied in OA, Cl⁻ and their mixed solutions; the synergistic effect of OA and Cl⁻ on the corrosion of ADC12 aluminum alloy was discussed, and aluminum oxalate formed inhibited its corrosion.

Purpose: This chapter aims to evaluate the significant impact of Gandhian values on sustainable consumption behaviour (SCB) by applying the value-attitude-behaviour (VAB) framework. This chapter contributes by incorporating Gandhian values as one influencing factor for SCB.

Need for the Study: Values are considered as guiding principles in people’s lives. Studies suggest that values and other social and psychological factors can be vital in determining consumers’ behaviour towards sustainable consumption. There needs to be more empirical research on consumer behaviour facets of sustainable consumption for markets in India.

Methodology: The study uses partial least square structural equation modelling to empirically test proposed hypotheses and the research model of the relationship. The study results are based on data collected by administering a survey through a questionnaire confined to India.

Findings: The results indicated that Gandhian values, attitude, and sustainable consumption intention significantly influence SCB. Intention acts as a mediator between both outward and inward environmental attitudes and behaviour. The study provides directions for further research.

Practical Implications: This research study is helpful for researchers, marketers, and policymakers.