Search results

Bearings play a critical role in the reliable operation of induction machines, and their failure can lead to significant operational challenges and downtime. Detecting and diagnosing these defects is imperative to ensure the longevity of induction machines and preventing costly downtime. The purpose of this paper is to develop a novel approach for diagnosis of bearing faults in induction machine.

To identify the different fault states of the bearing with accurately and efficiently in this paper, the original bearing vibration signal is first decomposed into several intrinsic mode functions (IMFs) using variational mode decomposition (VMD). The IMFs that contain more noise information are selected using the Pearson correlation coefficient. Subsequently, discrete wavelet transform (DWT) is used to filter the noisy IMFs. Second, the composite multiscale weighted permutation entropy (CMWPE) of each component is calculated to form the features vector. Finally, the features vector is reduced using the locality-sensitive discriminant analysis algorithm, to be fed into the support vector machine model for training and classification.

The obtained results showed the ability of the VMD_DWT algorithm to reduce the noise of raw vibration signals. It also demonstrated that the proposed method can effectively extract different fault features from vibration signals.

This study suggested a new VMD_DWT method to reduce the noise of the bearing vibration signal. The proposed approach for bearing fault diagnosis of induction machine based on VMD-DWT and CMWPE is highly effective. Its effectiveness has been verified using experimental data.

European Parliament adopted a new directive on gender balance in corporate boards when by 2026, companies must employ 40% of the underrepresented sex into non-executive directors or 33% among all directors. Therefore, this study aims to analyze the impact of gender diversity (GD) on board of directors and the shareholders’ structure and their impact on the likelihood of company bankruptcy during the COVID-19 pandemic.

The data sample consists of 1,351 companies for 2019 and 2020, of which 173 were large, 351 medium-sized companies and 827 small companies. Three bankruptcy indicators were tested for each company size, and extreme gradient boosting (XGBoost) and logistic regression models were developed. These models were then cross-validated by a 10-fold approach.

XGBoost models achieved area under curve (AUC) over 98%, which is 25% higher than AUC achieved by logistic regression. Prediction models with GD features performed slightly better than those without them. Furthermore, this study indicates the existence of critical mass between 30% and 50%, which decreases the probability of bankruptcy for small and medium companies. Furthermore, the representation of women in ownership structures above 50% decreases bankruptcy likelihood.

This is a pioneering study to explore GD topics by application of ensembled machine learning methods. Moreover, the study does analyze not only the GD of boards but also shareholders. A highly innovative approach is GD analysis based on company size performed in one study considering the COVID-19 pandemic perspective.

Reducing and eradicating global poverty features as a primary objective of the sustainable development goals (SDGs) for 2030. Since over half a century, the World Bank has disbursed loans amounting to billions of US dollars to assist countries to alleviate poverty. However, the path to zero poverty is often impaired with conflicts, social unrest and, most commonly, economic crisis. In this chapter, we examine the inter-linkage between various forms of economic crises, poverty and government expenditure for a set of 127 countries from 1985 to 2010. Using a simultaneous equation model, we test the direct effect of a financial crisis on the incidence of poverty and its indirect effect through the immediate decrease in government expenditure. Contrary to previous studies, our findings suggest that crises have no direct impact on poverty. We find a similar effect for currency, inflation and debt crisis. However, there is evidence that poverty increases indirectly due to a fall in government expenditure. Our results are robust for non-advanced and advanced economies and alternate estimation technique using factor analysis.

This paper aims to explore the rationale, the process and the outcomes and risks of place branding in rural China.

An in-depth case study analysis, including interviews, has been conducted.

Place branding in the case of China is practiced and dominated through administrative entities by using subsidies and regional development programs to coordinate, organize and promote local agricultural resources. Although this government-led place branding has effective effects on rural development, it is unsustainable and unstable because it lacks sufficient market and stakeholder participation.

The effectiveness of place branding in China has been examined and proved.

The government’s role in place branding in China should be adjusted. The government should position itself as a service and auxiliary role. Simultaneously, it should strengthen market-oriented operations and stakeholder participation in place branding.

This paper is one of the first contributions to examine the impact of place branding as a rural development policy tool in China, and the in-depth case study examines and proves the effectiveness of place branding in rural China.

The purpose of this paper is to investigate the effectiveness of TikTok, a popular short-form video marketing platform, on purchase intention for cosmetics among Generation Z consumers in Singapore.

A quantitative survey was conducted using a convenience sampling method, with a sample of 136 responses. This study examined the influence of various characteristics of TikTok influencers, such as trustworthiness, expertise, attractiveness and entertainment content, on purchase intention.

This study found that trustworthiness and expertise of influencers, as well as entertainment content, had a significant positive impact on purchase intention. In addition, this study also found that influencer attractiveness and brand anthropomorphism were also significant factors influencing purchase intention. Thise study highlights the importance of the entertainment value, which is in line with the nature of TikTok as a medium.

This study contributes to the limited literature on the effectiveness of TikTok on purchase intention in Singapore, specifically in the cosmetics industry.

This research aims to analyze the factors affecting the people's performance working in the health sector to improve the services the health sector provide to society and increase the efficiency of their institutions.

Conceptual model covering paternalistic leadership, employee creativity and psychological safety as an intermediary role has been suggested. A questionnaire was applied to 600 employees of three hospitals in Izmir voluntarily and 531 questionnaire data were obtained to test the proposed model. Statistical Package for the Social Sciences-23 and Amos-18 were the statistical software used to analyze the data.

The results suggest that paternalistic leadership positively affects employee creativity and psychological safety plays a mediating role in this relationship. While the effects of paternalistic leadership on employee resourcefulness are readily available, paternalistic leadership's mechanisms need elucidation.

Previous studies have addressed issues, such as employees' job satisfaction and organizational commitment, covering Far East countries. Yet, the present research's findings enhance the cultural understanding of the conditions, where the paternalistic leader affects employee creativity. Moreover, leader affects must have managerial contributions to institutions.

The purpose of this paper is to review cases of artificial reefs built through additive manufacturing (AM) technologies and analyse their ecological goals, fabrication process, materials, structural design features and implementation location to determine predominant parameters, environmental impacts, advantages, and limitations.

The review analysed 16 cases of artificial reefs from both temperate and tropical regions. These were categorised based on the AM process used, the mortar material used (crucial for biological applications), the structural design features and the location of implementation. These parameters are assessed to determine how effectively the designs meet the stipulated ecological goals, how AM technologies demonstrate their potential in comparison to conventional methods and the preference locations of these implementations.

The overview revealed that the dominant artificial reef implementation occurs in the Mediterranean and Atlantic Seas, both accounting for 24%. The remaining cases were in the Australian Sea (20%), the South Asia Sea (12%), the Persian Gulf and the Pacific Ocean, both with 8%, and the Indian Sea with 4% of all the cases studied. It was concluded that fused filament fabrication, binder jetting and material extrusion represent the main AM processes used to build artificial reefs. Cementitious materials, ceramics, polymers and geopolymer formulations were used, incorporating aggregates from mineral residues, biological wastes and pozzolan materials, to reduce environmental impacts, promote the circular economy and be more beneficial for marine ecosystems. The evaluation ranking assessed how well their design and materials align with their ecological goals, demonstrating that five cases were ranked with high effectiveness, ten projects with moderate effectiveness and one case with low effectiveness.

AM represents an innovative method for marine restoration and management. It offers a rapid prototyping technique for design validation and enables the creation of highly complex shapes for habitat diversification while incorporating a diverse range of materials to benefit environmental and marine species’ habitats.

The lightweight design of aircraft seats can significantly improve fuel efficiency and reduce greenhouse gas emissions. Metal additive manufacturing (MAM) can produce lightweight topology-optimized designs with improved performance, but limited build volume restricts the printing of large components. The purpose of this paper is to design a lightweight aircraft seat leg structure using topology optimization (TO) and MAM with build volume restrictions, while satisfying structural airworthiness certification requirements.

TO was used to determine a lightweight conceptual design for the seat leg structure. The conceptual design was decomposed to meet the machine build volume, a detailed CAD assembly was designed and print orientation was selected for each component. Static and dynamic verification was performed, the design was updated to meet the structural requirements and a prototype was manufactured.

The final topology-optimized seat leg structure was decomposed into three parts, yielding a 57% reduction in the number of parts compared to a reference design. In addition, the design achieved an 8.5% mass reduction while satisfying structural requirements for airworthiness certification.

To the best of the authors’ knowledge, this study is the first paper to design an aircraft seat leg structure manufactured with MAM using a rigorous TO approach. The resultant design reduces mass and part count compared to a reference design and is verified with respect to real-world aircraft certification requirements.

The food industry is continuously developing its online services called food delivery applications (FDAs). This study aims to evaluate FDA's importance–performance and identify strategies to maximize its potential gains from a business partner's perspective.

Data are collected from 208 FDA partners in Indonesia. Importance–performance analysis (IPA) is applied to evaluate the FDA feature and extended the theory of potential gain in customer value (PGCV) to achieve potential gains from FDA business partners.

This study provides a clear and measurable direction for future research to develop FDA performance. Owning customer data, revenue sharing and competitive advantage are the most potential gains from joining the FDA from the business partner perspective.

The respondents are restaurants from the micro, small, and medium enterprises levels. Further research should involve middle to upper level restaurants to discover all business partners' perceptions. This will be very helpful for FDA providers interested in improving the best performance for all their partners.

FDA providers must focus on improving and maintaining the features of owning customer data, revenue sharing, competitive advantage, stable terms and conditions, customer interface, building customer loyalty, online presence, user credit rating, promotion and offers, delivery service and sales enhancement to increase consumer satisfaction and meet the expectations desired by business partners.

This research provides a meaningful theoretical foundation for future work. It extends the theory of PGCV using the value of a partner perspective as a substitute for customer value; hence, the authors call it a potential gain in partner value.

This study aims to examine Victorian primary school parents’ perspectives about a potential school-provided lunch program (LP).

An online cross-sectional survey was conducted in Victoria, Australia, in 2022 to explore parents’ perceptions regarding the lunch menu, funding source, amount willing to pay, frequency of meals and special dietary needs of a school-provided LP.

Over half of parents (57% out of 359) said they would allow their child to participate in a school LP, 34% were unsure and only 9% said they would not. The opportunity for hot cooked lunches at school and the perceived convenience for parents were the top two reasons for favouring such a program. Fifty-eight percent were in favour of hybrid-type funding from both the government and parents. The most preferred amount to pay per meal was AUD5-6 (43%), followed by AUD3-4 (25%). Parents expected meals to be healthy and made from whole food and cater to the special dietary and cultural needs of their children. They also expected enough time to be allocated so children could eat and enjoy the meals.

To the best of the authors’ knowledge, this is the first study to explore Victorian parents’ perceptions regarding the above aspects of a school-provided LP. The findings suggest that parents are receptive to a school-provided LP; they, however, did have several expectations regarding the menu and time for eating. These findings provide important directions for designing future school-provided LPs at primary schools in Australia.