Search results

This study aims to investigate the potential of using polymer multi-material additive manufacturing (MMAM) to produce miniature hydraulic piston actuators combining rigid structures and flexible seals. Such actuators offer great potential for medical robots in X-ray and magnetic resonance environments, where conventional piston actuators cannot be used because of safety issues caused by metal components.

Hydraulic pistons with two different integrated flexible seal shapes are designed and manufactured using MMAM. Design 1 features a ring-shaped seal made from a flexible material that is printed on the surface of the rigid piston shaft. Design 2 appears identical from the outside, yet an axial opening in the piston shaft is added to enable self-reinforced sealing as fluid pressure increases. For both designs, samples with three different outer diameters are fabricated leading to a total of six different piston versions. The pistons are then evaluated regarding leakage, friction and durability.

Measurement results show that the friction force for Design 2 is lower than that of Design 1, making Design 2 more suitable for the intended application. None of the versions of Design 2 shows leakage for pressures up to 1.5 MPa. For Design 1, leak-tightness varies with the outer diameter, yet none of the versions is consistently leak-tight at 1.5 MPa. Furthermore, the results show that prolonged exposure to water decreases the durability of the flexible material significantly. The durability the authors observe may, however, be sufficient for short-term or single-use devices.

The authors investigate a novel design approach for hydraulic piston actuators based on MMAM. These actuators are of particular interest for patient-specific medical devices used in radiological interventions, where metal-free components are required to safely operate in X-ray and magnetic resonance environments. This study may serve as a basis for the development of new actuators, as it shows a feasible solution, yet pointing out critical aspects such as the influence of small geometry changes or material performance changes caused by water absorption.

Presents the kinematic calibration of an H4 parallel prototype robot using a vision‐based measuring device. Calibration is performed according to the inverse kinematic model method, using first the design model then a model developed for calibration purpose. To do so, the end‐effector pose (i.e. position and orientation) has to be measured with the utmost accuracy. Thus, first the practical accuracy of the low‐cost vision‐based measuring system is evaluated to have a precision in the order of magnitude of 10μ_it;m and 10^−3° for a 1,024×768 pixel CCD camera. Second, the prototype is calibrated using the easy‐to‐install vision system, yielding a final positioning accuracy of the end‐effector reduced from more than 1cm down to less than 0.5mm. Also provides a discussion on the use of such a method on commercial systems.

Transcranial magnetic stimulation (TMS) is a non-invasive brain stimulation technique. Based on the unique functions of TMS, it has been widely used in clinical, scientific research and other fields. Nowadays, the robot-assisted automatic TMS has become the trend. In order to simplify the operation procedures of robotic TMS and reduce the costs, the purpose of this paper is to apply the marker-based augmented-reality technology to robotic TMS system.

By using the marker of ARToolKitPlus library and monocular camera, the patient’s head is positioned in real time. Furthermore, the force control is applied to keep contact between the coil and subject’s head.

The authors fuse with visual positioning which is based on augmented-reality and force-control technologies to track the movements of the patient’s head, bring the coil closer to the stimulation site and increase treatment effects. Experimental results indicate that the trajectory tracking control of robotic TMS system designed in this paper is practical and flexible.

This paper provides a trajectory tracking control method for the robotic TMS. The marker-based augmented-reality technology is implemented which simplifies the operation procedures of robotic TMS as well as reduce the costs. During the treatment process, the patients would wear an AR glasses, which can help patients relax through virtual scenes and reduce the uncomfortableness produce by treatment.

In this chapter, we will be describing the situation of minority groups in the labour market and in organizations in Québec and Canada. We will be focussing mainly on the situation of women and ethnocultural minorities. First, we will present a statistical picture of their situation. Second, we will explore in more depth the situation of two ethnocultural groups – the Maghrebians and the French – in Québec, ¹ to demonstrate the complexity of the situation of minority groups that cannot be portrayed by statistics alone. Then, third, we will examine some tensions specific to Western societies that have an impact on the dynamics of culturally diverse enterprises. This assessment will show that even though much progress has been made, especially for women, there is still much to do to ensure full equality and greater fairness between minority and majority groups in Québec and Canada. Furthermore, by means of a more qualitative analysis of the situation of these two ethnocultural groups, we will see that statistics do not tell the whole story.

The study examines how late adolescents use the resources embedded in their social network to obtain the information and support they need to do their homework. A particular attention is paid to how social network sites (SNSs) are used and perceived by late adolescents for academic help seeking.

This qualitative study uses in-depth interviewing and critical incident technique. An egocentric approach to Social Network Analysis is also employed to examine the core social network of each participant.

Most adolescents had a solid personal social network but did not always fully take advantage of the resources embedded in it for schoolwork. Availability was the most important criteria for deciding who to approach. SNSs were often used to obtain the help they needed, although phone calls and in-person visits were considered more efficient in certain situations.

This study draws on a small purposive sample that may limit generalization. This research contributes to our understanding of the resources late adolescents have access to within their core social network, the way they take advantage (or not) of these resources for schoolwork, and the role SNSs play in the process. Findings have implications for services that educators and school librarians should provide to support the educational needs of late adolescents.

This study contributes more generally to our understanding of late adolescents’ use of people as primary sources of information to complete school-related homework.

The purpose of this paper is to present forecasts of fossil fuels prices until 2030 with spectral analysis to provide a clearer picture of this energy sector.

Fossil fuels prices time series are decomposed in simpler signals called approximations and details in the framework of the one-dimensional discrete wavelet analysis. The simplified signals are recomposed after Burg extension.

In 2019-2030 average price forecasts of: West Texas intermediate (WTI) oil ($58.67) is above its 1986-2030 long-term mean of $47.83; and coal ($81.01) is above its 1980-2030 long-term mean of $60.98. On the contrary, 2019-2030 average of price forecasts of: Henry Hub natural gas ($3.66) is below its 1997-2030 long-term mean of $4; heating oil ($0.64) is below its 1986-2030 long-term mean of $1.16; propane ($0.26) is below its 1992-2030 long-term mean of $0.66; and regular gasoline ($1.45) is below its 2003-2030 long-term mean of $1.87.

Fossil fuels prices projections may relieve participants of WTI oil and coal markets but worry participants of Henry Hub, heating oil, propane and regular gasoline markets including countries whose economy is tied to energy prices.

The purpose of this paper is to estimate the years the European Muslim population will be majority among 30 European countries.

The methodology/approach is to forecast the population of 30 European countries with wavelet analysis combined with the Burg model which fits a pth order autoregressive model to the input signal by minimizing (least squares) the forward and backward prediction errors while constraining the autoregressive parameters to satisfy the Levinson–Durbin recursion, then relies on an infinite impulse response prediction error filter. Three scenarios are considered: the zero-migration scenario where the authors assume that the Muslim population has a higher fertility (one child more per woman, on average) than other Europeans, mirroring a global pattern; a 2017 migration scenario: to the Muslim population obtained in the zero-migration scenario, the authors add a continuous flow of migrants every year based on year 2017; the mid-point migration scenario is obtained by averaging the data of the two previous scenarios.

Among three scenarios, the most likely mid-point migration scenario identifies 13 countries where the Muslim population will be majority between years 2085 and 2215: Cyprus (in year 2085), Sweden (2125), France (2135), Greece (2135), Belgium (2140), Bulgaria (2140), Italy (2175), Luxembourg (2175), the UK (2180), Slovenia (2190), Switzerland (2195), Ireland (2200) and Lithuania (2215). The 17 remaining countries will never reach majority in the next 200 years.

The growing Muslim population will change the face of Europe socially, politically and economically. This paper will provide a better insight and understanding of Muslim population dynamics to European governments, policymakers, as well as social and economic planners.

The purpose of the paper is to forecast economic indicators of the Saudi economy in the context of low oil prices which have taken a toll on the Saudi oil-dependent economy between 2014 and 2017. Trades and investments have plummeted, leading to significant budget deficits. In response, the government unveiled a plan called Saudi Vision 2030 in 2016 which has triggered structural economic reforms leading to an unprecedented strategy of transition from an oil-driven economy to a modern market economy.

This paper forecasts with spectral analysis economic indicators of the Saudi economy up to 2030 to provide a clearer picture of the future economy assuming that the effects of recent reforms have not yet been traced by most of the economic indicators.

2018–2030 forecasts are all bearish except West Texas Intermediate (WTI) oil price expected to average $64.40 during the period 2019–2030. Two additional exceptions are the Saudi population that should grow to 40 million in 2030 and the swelling gross domestic product (GDP) generated by the non-oil sector resulting from bold actions of the Saudi government who is willing to become less dependent on revenues generated by the oil sector.

Government policymakers, economists and investors would have with spectral forecasts better insight and understanding of the Saudi economy dynamics at the early stage of major economic reforms implemented in the country. In 2020, the COVID-19 pandemic has brutally hurt the Saudi economy following a collapse in the global demand for oil and an oversupplied industry. The impact on the Saudi economy will depend on the optimal response brought by its government.

Saudi Vision 2030 plan has already triggered a deep transformation of the Saudi society that is reviewed in this paper.

The forecast of Saudi economic indicators is a timely topic considering the challenges facing the economy and reforms being undertaken. Applying an original forecasting technique to economic indicators adds to the originality of the paper.