Search results
1 – 10 of 76Ali Muhammad, Faisal Khan, Muhammad Yousuf and Basharat Ullah
The purpose of this paper is to modernize the generator system of wind turbine concept that not only improves the efficiency and power density but also reduces the system cost…
Abstract
Purpose
The purpose of this paper is to modernize the generator system of wind turbine concept that not only improves the efficiency and power density but also reduces the system cost making design simpler and less expensive, especially in large-scale production.
Design/methodology/approach
This paper presents a new permanent magnet transverse flux generator (PMTFG) for wind energy production. The key feature of its composition is the double armature coil in a semi-closed stator core. The main structural difference of the presented design is the use of double coil in the same space of semi-closed stator core and reduced number of stator pole pairs and rotor magnets from 12/24 to 10/20. 3D simulations are performed using finite element analysis (FEA) to measure induced voltage and magnetic field distribution at no load. The FEA is performed to quantify the change in flux linkage, induced voltage and output power as a function of different speeds and load current.
Findings
Results show that PMTFG with double coil configuration has improved electromagnetic performance in terms of flux linkage, induced voltage, output power and efficiency. The power density of 10/20 PMTFG with the double coil is 0.0524 KW/Kg, about an 18% increase compared to the conventional design.
Research limitations/implications
The proposed PMTFG is highly recommended for direct drive applications such as wind power.
Originality/value
Four models are simulated by FEA with single and double coil configuration, and load analysis is performed on all simulated models. Finally, results are compared with conventional PMTFG.
Details
Keywords
Gerasimos G. Rigatos, Masoud Abbaszadeh, Fabrizio Marignetti and Pierluigi Siano
Voltage source inverter-fed permanent magnet synchronous motors (VSI-PMSMs) are widely used in industrial actuation and mechatronic systems in water pumping stations, as well as…
Abstract
Purpose
Voltage source inverter-fed permanent magnet synchronous motors (VSI-PMSMs) are widely used in industrial actuation and mechatronic systems in water pumping stations, as well as in the traction of transportation systems (such as electric vehicles and electric trains or ships with electric propulsion). The dynamic model of VSI-PMSMs is multivariable and exhibits complicated nonlinear dynamics. The inverters’ currents, which are generated through a pulsewidth modulation process, are used to control the stator currents of the PMSM, which in turn control the rotational speed of this electric machine. So far, several nonlinear control schemes for VSI-PMSMs have been developed, having as primary objectives the precise tracking of setpoints by the system’s state variables and robustness to parametric changes or external perturbations. However, little has been done for the solution of the associated nonlinear optimal control problem. The purpose of this study/paper is to provide a novel nonlinear optimal control method for VSI-fed three-phase PMSMs.
Design/methodology/approach
The present article proposes a nonlinear optimal control approach for VSI-PMSMs. The nonlinear dynamic model of VSI-PMSMs undergoes approximate linearization around a temporary operating point, which is recomputed at each iteration of the control method. This temporary operating point is defined by the present value of the voltage source inverter-fed PMSM state vector and by the last sampled value of the motor’s control input vector. The linearization relies on Taylor series expansion and the calculation of the system’s Jacobian matrices. For the approximately linearized model of the voltage source inverter-fed PMSM, an H-infinity feedback controller is designed. For the computation of the controller’s feedback gains, an algebraic Riccati equation is iteratively solved at each time-step of the control method. The global asymptotic stability properties of the control method are proven through Lyapunov analysis. Finally, to implement state estimation-based control for this system, the H-infinity Kalman filter is proposed as a state observer. The proposed control method achieves fast and accurate tracking of the reference setpoints of the VSI-fed PMSM under moderate variations of the control inputs.
Findings
The proposed H-infinity controller provides the solution to the optimal control problem for the VSI-PMSM system under model uncertainty and external perturbations. Actually, this controller represents a min–max differential game taking place between the control inputs, which try to minimize a cost function that contains a quadratic term of the state vector’s tracking error, the model uncertainty, and exogenous disturbance terms, which try to maximize this cost function. To select the feedback gains of the stabilizing feedback controller, an algebraic Riccati equation is repetitively solved at each time-step of the control algorithm. To analyze the stability properties of the control scheme, the Lyapunov method is used. It is proven that the VSI-PMSM loop has the H-infinity tracking performance property, which signifies robustness against model uncertainty and disturbances. Moreover, under moderate conditions, the global asymptotic stability properties of this control scheme are proven. The proposed control method achieves fast tracking of reference setpoints by the VSI-PMSM state variables, while keeping also moderate the variations of the control inputs. The latter property indicates that energy consumption by the VSI-PMSM control loop can be minimized.
Practical implications
The proposed nonlinear optimal control method for the VSI-PMSM system exhibits several advantages: Comparing to global linearization-based control methods, such as Lie algebra-based control or differential flatness theory-based control, the nonlinear optimal control scheme avoids complicated state variable transformations (diffeomorphisms). Besides, its control inputs are applied directly to the initial nonlinear model of the VSI-PMSM system, and thus inverse transformations and the related singularity problems are also avoided. Compared with backstepping control, the nonlinear optimal control scheme does not require the state-space description of the controlled system to be found in the triangular (backstepping integral) form. Compared with sliding-mode control, there is no need to define in an often intuitive manner the sliding surfaces of the controlled system. Finally, compared with local model-based control, the article’s nonlinear optimal control method avoids linearization around multiple operating points and does not need the solution of multiple Riccati equations or LMIs. As a result of this, the nonlinear optimal control method requires less computational effort.
Social implications
Voltage source inverter-fed permanent magnet synchronous motors (VSI-PMSMs) are widely used in industrial actuation and mechatronic systems in water pumping stations, as well as in the traction of transportation systems (such as electric vehicles and electric trains or ships with electric propulsion), The solution of the associated nonlinear control problem enables reliable and precise functioning of VSI-fd PMSMs. This in turn has a positive impact in all related industrial applications and in tasks of electric traction and propulsion where VSI-fed PMSMs are used. It is particularly important for electric transportation systems and for the wide use of electric vehicles as expected by green policies which aim at deploying electromotion and at achieving the Net Zero objective.
Originality/value
Unlike past approaches, in the new nonlinear optimal control method, linearization is performed around a temporary operating point, which is defined by the present value of the system’s state vector and by the last sampled value of the control input vector and not at points that belong to the desirable trajectory (setpoints). Besides, the Riccati equation, which is used for computing the feedback gains of the controller, is new, as is the global stability proof for this control method. Comparing with nonlinear model predictive control, which is a popular approach for treating the optimal control problem in industry, the new nonlinear optimal (H-infinity) control scheme is of proven global stability, and the convergence of its iterative search for the optimum does not depend on initial conditions and trials with multiple sets of controller parameters. It is also noteworthy that the nonlinear optimal control method is applicable to a wider class of dynamical systems than approaches based on the solution of state-dependent Riccati equations (SDRE). The SDRE approaches can be applied only to dynamical systems that can be transformed to the linear parameter varying form. Besides, the nonlinear optimal control method performs better than nonlinear optimal control schemes which use approximation of the solution of the Hamilton–Jacobi–Bellman equation by Galerkin series expansions.
Details
Keywords
Christian Kreischer, Andrzej Demenko, Wojciech Pietrowski and Kay Hameyer
Mariusz Korkosz, Stanisław Noga and Tomasz Rogalski
The study aims to show the influence of selected mechanical parameters of the rotor on the maximum speed and parameters of the electric motor.
Abstract
Purpose
The study aims to show the influence of selected mechanical parameters of the rotor on the maximum speed and parameters of the electric motor.
Design/methodology/approach
A simplified mechanical analysis of the rotor of the electric motor was conducted, determining the safety factor of the motor. An analysis of the impact of key rotor parameters (significant from the mechanical strength perspective) on the electromagnetic parameters and the safety factor of the selected high-speed electric motor was carried out. The influence of changes in the rotor’s geometrical dimensions (centrifugal force) on the electromagnetic parameters of the electric motor was shown.
Findings
The study shows the impact of changes in selected rotor parameters on electromagnetic parameters and the safety factor of a high-speed electric motor (at its required operating point of 45,000 rpm). The dependence of the safety factor as a function of the maximum motor speed was determined for the proposed rotor modifications.
Practical implications
The proposed modifications can be used in larger drive systems. They have practically no impact on increasing the value of the motor’s moment of inertia (they do not degrade the dynamics of the motor’s operation).
Originality/value
It was proposed to use a new design coefficient which is in relation to the motor’s safety coefficient. It has been shown that a minimal modification of the motor rotor allows to increase its maximum speed by several dozen per cent (while maintaining the safety factor). It has also been shown that when operating at maximum speed within the safe range, the change in the geometrical dimensions of the rotor hardly influences the change in the value of the centrifugal force.
Details
Keywords
Fabian Müller, Paul Baumanns and Kay Hameyer
The calculation of electromagnetic fields can involve many degrees of freedom (DOFs) to achieve accurate results. The DOFs are directly related to the computational effort of the…
Abstract
Purpose
The calculation of electromagnetic fields can involve many degrees of freedom (DOFs) to achieve accurate results. The DOFs are directly related to the computational effort of the simulation. The effort is decreased by using the proper generalized decomposition (PGD) and proper orthogonalized decomposition (POD). The purpose of this study is to combine the advantages of both methods. Therefore, a hybrid enrichment strategy is proposed and applied to different electromagnetic formulations.
Design/methodology/approach
The POD is an a-priori method, which exploits the solution space by decomposing reference solutions of the field problem. The disadvantage of this method is given by the unknown number of solutions necessary to reconstruct an accurate field representation. The PGD is an a-priori approach, which does not rely on reference solutions, but require much more computational effort than the POD. A hybrid enrichment strategy is proposed, based on building a small POD model and using it as a starting point of the PGD enrichment process.
Findings
The hybrid enrichment process is able to accurately approximate the reference system with a smaller computational effort compared to POD and PGD models. The hybrid enrichment process can be combined with the magneto-dynamic T-Ω formulation and the magnetic vector potential formulation to solve eddy current or non-linear problems.
Originality/value
The PGD enrichment process is improved by exploiting a POD. A linear eddy current problem and a non-linear electrical machine simulation are analyzed in terms of accuracy and computational effort. Further the PGD-AV formulation is derived and compared to the PGD-T-Ω reduced order model.
Details
Keywords
Lazhar Roubache, Kamel Boughrara, Frédéric Dubas, Brahim Ladghem Chikouche and Rachid Ibtiouen
This paper aims to propose a semianalytical model of a squirrel-cage induction machine (SCIM), considering local magnetic saturation and eddy-currents induced in the rotor bars.
Abstract
Purpose
This paper aims to propose a semianalytical model of a squirrel-cage induction machine (SCIM), considering local magnetic saturation and eddy-currents induced in the rotor bars.
Design/methodology/approach
The regions of the rotor and stator are divided into elementary subdomains (E-SDs) characterized by general solutions at the first harmonic of the magneto-harmonic Maxwell’s equations. These E-SDs are connected in both directions (i.e., along the r- and θ-edges).
Findings
The calculation of the magnetic field has been validated for various values of slip and iron permeability. All electromagnetic quantities were compared with those obtained using a two-dimensional finite-element method. The semianalytical results are satisfactory compared with the numerical results, considering both the amplitude and waveform.
Originality/value
Expansion of the recent analytical model (E-SD technique) for the full prediction of the magnetic field in SCIMs, considering the local saturation effect and the eddy-currents induced in the rotor bars.
Details
Keywords
Hao Chen, Fan Yang, Miguel Pablo Aguirre, Muhammad Asghar Saqib, Galina Demidova, Alecksey Anuchin, Mohamed Orabi, Ryszard Palka, Liudmila Ivanovna Sakhno and Nikolay Vladimirovich Korovkin
Because of the shortage of energy, the development of green and reliable energy is particularly important. As a green and clean energy, wind power is widely used. As the core…
Abstract
Purpose
Because of the shortage of energy, the development of green and reliable energy is particularly important. As a green and clean energy, wind power is widely used. As the core component of wind power generation, it is particularly important to choose generators with high reliability. Switched reluctance machine is widely used as generators because of its strong fault tolerance and high reliability. Therefore, this paper aims to propose a power converter and its control strategy to improve the efficiency of switched reluctance generators.
Design/methodology/approach
In this paper, a full-bridge power converter (FBPC) instead of the asymmetric half-bridge power converter (AHBPC) is adopted to drive the switched reluctance generator (SRG) system. Compare the FBPC with the AHBPC, the FBPC has several advantages including low cost and modularization, and operation process of SRG winding current direction is variable.
Findings
The results show that the SRG system can keep smooth operation by the FBPC with relatively high efficiency.
Originality/value
The FBPC is suitable to drive the SRG system. Meanwhile, this paper introduces two excitation modes of the FBPC as three-phase three-beat mode and six-phase six-beat mode. When the six-phase six-beat control strategy is adopted, the dead band time of the converter can be avoided. At the same time, the SRG has higher efficiency.
Details
Keywords
Mohammadhossein Arianborna, Jawad Faiz, Mehrage Ghods and Amirhossein Erfani-Nik
The aim of this paper is to introduce an accurate asymmetric fault index for the diagnosis of the faulty linear permanent magnet Vernier machine (LPMVM).
Abstract
Purpose
The aim of this paper is to introduce an accurate asymmetric fault index for the diagnosis of the faulty linear permanent magnet Vernier machine (LPMVM).
Design/methodology/approach
Three-dimensional finite element method is applied to model the LPMVM. The geometrical and physical properties of the machine, the effect of stator and translator teeth, magnetic saturation of core and nonuniform air gap due to asymmetric fault are taken into account in the simulation. The air gap asymmetric fault is proposed. This analytical method estimates the air gap flux density of an LPMVM.
Findings
This paper presents an analytical method to predict the performance of a healthy and faulty LPMVM. The introduced index is based on the frequency patterns of the stator current. Besides, the robustness of the index in different loads and fault severity is addressed.
Originality/value
Introducing index for air gap asymmetry fault diagnosis of LPMVM.
Details
Keywords
Cheng Peng, He Cheng, Tong Zhang, Jing Wu, Fandi Lin and Jinglong Chu
This paper aims to further develop stator permanent magnet (PM) type memory machines by providing generalized design guidelines for double-stator memory machines (DSMMs) with…
Abstract
Purpose
This paper aims to further develop stator permanent magnet (PM) type memory machines by providing generalized design guidelines for double-stator memory machines (DSMMs) with hybrid PMs. This paper discusses the design experience of DSMMs and presents a comparative study of radial magnetization (RM) and circumferential magnetization (CM) types.
Design/methodology/approach
It begins with an introduction to RM and CM operating principles and magnetization mechanisms. Then, a comparative study is conducted for one of the RM-DSMM rotor pole pairs, inner and outer stator clamping angles and low coercive force PMs thickness. Finally, the two machines’ finite element simulation performance is compared. The validity of the proposed machine structure is demonstrated.
Findings
In this paper, the double-stator structure is extended to parallel hybrid PM memory machines, and two novel DSMMs with RM and CM configurations are proposed. Two types of DSMMs have PMs and magnetizing windings on the inner stator and armature windings on the outer stator. The main difference between the two is the arrangement of PMs on the inner stator.
Originality/value
Conventional stator PM memory machines have geometrical space conflicts between the PM and armature windings. The proposed double-stator structure can alleviate these conflicts and increase the torque density accordingly. In addition, this paper contributes to comparing the arrangement of hybrid PMs for DSMMs.
Details
Keywords
Zhen Sun, Takahiro Sato and Kota Watanabe
Topology optimization (TO) methods have shown their unique advantage in the innovative design of electric machines. However, when introducing the TO method to the rotor design of…
Abstract
Purpose
Topology optimization (TO) methods have shown their unique advantage in the innovative design of electric machines. However, when introducing the TO method to the rotor design of interior permanent magnet (PM) synchronous machines (IPMSMs), the layout parameters of the magnet cannot be synchronously optimized with the topology of the air barrier; the full design potential, thus, cannot be unlocked. The purpose of this paper is to develop a novel method in which the layout parameters PMs and the topology of air barriers can be optimized simultaneously for aiding the innovative design of IPMSMs.
Design/methodology/approach
This paper presents a simultaneous TO and parameter optimization (PO) method that is applicable to the innovative design of IPMSMs. In this method, the mesh deformation technique is introduced to make it possible to make a connection between the TO and PO, and the multimodal optimization problem can thereby be solved more efficiently because good topological features are inherited during iterative optimization.
Findings
The numerical results of two case studies show that the proposed method can find better Pareto fronts than the traditional TO method within comparable time-consuming. As the optimal design result, novel rotor structures with better torque profiles and higher reluctance torque are respectively found.
Originality/value
A method that can simultaneously optimize the topology and parameter variables for the design of IPMSMs is proposed. The numerical results show that the proposed method is useful and practical for the conceptual and innovative design of IPMSMs because it can automatically explore optimal rotor structures from the full design space without relying on the experience and knowledge of the engineer.
Details