Search results

Computer vision (CV) offers a promising approach to transforming the conventional in-person inspection practices prevalent within the construction industry. However, the reliance on centralized systems in current CV-based inspections introduces a vulnerability to potential data manipulation. Unreliable inspection records make it challenging for safety managers to make timely decisions to ensure safety compliance. To address this issue, this paper proposes a blockchain (BC) and CV-based framework to enhance safety inspections at construction sites.

This study adopted a BC-enhanced CV approach. By leveraging CV and BC, safety conditions are automatically identified from site images and can be reliably recorded as safety inspection data through the BC network. Additionally, by using this data, smart contracts coordinate inspection tasks, assign responsibilities and verify safety performance, managing the entire safety inspection process remotely.

A case study confirms the framework’s applicability and efficacy in facilitating remote and reliable safety inspections. The proposed framework is envisaged to greatly improve current safety inspection practices and, in doing so, contribute to reduced accidents and injuries in the construction industry.

This study provides novel and practical guidance for integrating CV and BC in construction safety inspection. It fulfills an identified need to study how to leverage CV-based inspection results for remotely managing the safety inspection process using BC. This work not only takes a significant step towards data-driven decision-making in the safety inspection process, but also paves the way for future studies aiming to develop tamper-proof data management systems for industrial inspections and audits.

This study aims to propose a method for monitoring bearing health in the time–frequency domain, termed the Lock-in spectrum, to track the evolution of bearing faults over time and frequency.

The Lock-in spectrum uses vibration signals captured by vibration sensors and uses a lock-in process to analyze specified frequency bands. It calculates the distribution of signal amplitudes around fault characteristic frequencies over short time intervals.

Experimental results demonstrate that the Lock-in spectrum effectively captures the degradation process of bearings from fault inception to complete failure. It provides time-varying information on fault frequencies and amplitudes, enabling early detection of fault growth, even in the initial stages when fault signals are weak. Compared to the benchmark short-time Fourier transform method, the Lock-in spectrum exhibits superior expressive ability, allowing for higher-resolution, long-term monitoring of bearing condition.

The proposed Lock-in spectrum offers a novel approach to bearing health monitoring by capturing the dynamic evolution of fault frequencies over time. It surpasses traditional methods by providing enhanced frequency resolution and early fault detection capabilities.

The purpose of this paper is to determine the effect of the industrial sector, renewable energy consumption and nonrenewable energy consumption in Indonesia on the ecological footprint from 1990 to 2020 in the short and long term.

This paper uses vector error correction model (VECM) analysis to examine the relationship in the short and long term. In addition, the impulse response function is used to enable future forecasts up to 2060 of the ecological footprint as a measure of environmental degradation caused by changes or shocks in industrial value-added, renewable energy consumption and nonrenewable energy consumption. Furthermore, forecast error decomposition of variance (FEVD) analysis is carried out to predict the percentage contribution of each variable’s variance to changes in a specific variable. Granger causality testing is used to enhance the analysis outcomes within the framework of VECM.

Using VECM analysis, the speed of adjustment for environmental damage is quite high in the short term, at 246%. This finding suggests that when there is a short-term imbalance in industrial value-added, renewable energy consumption and nonrenewable energy consumption, the ecological footprint experiences a very rapid adjustment, at 246%, to move towards long-term balance. Then, in the long term, the ecological footprint in Indonesia is most influenced by nonrenewable energy consumption. This is also confirmed by the Granger causality test and the results of FEVD, which show that the contribution of nonrenewable energy consumption will be 10.207% in 2060 and will be the main contributor to the ecological footprint in the coming years to achieve net-zero emissions in 2060. In the long run, renewable energy consumption has a negative effect on the ecological footprint, whereas industrial value-added and nonrenewable energy consumption have a positive effect.

For the first time, value added from the industrial sector is being used alongside renewable and nonrenewable energy consumption to measure Indonesia’s ecological footprint. The primary cause of Indonesia’s alarming environmental degradation is the industrial sector, which acts as the driving force behind this issue. Consequently, this contribution is expected to inform the policy implications required to achieve zero carbon emissions by 2060, aligned with the G20 countries’ Bali agreement of 2022.

This study aims to analyze the implications of the recent European Union Regulation 2023/1542 on the circular economy and stakeholder strategies within the electric vehicle lithium-ion battery (EV-LIB) sector. It aims to explain the policy intentions, recommend practical strategies for stakeholders and examine how the new regulation exerts pressure on stakeholders to transition from older directives to more sustainable practices and operational standards, while also highlighting policy gaps.

The research employs a dual-method approach, combining text analysis of EU legislation with semi-structured interviews of industry stakeholders. This methodology allows for a comprehensive understanding of the regulatory impacts by integrating legislative intent with practical, on-the-ground insights from key players in the EV-LIB sector.

Our findings show that the three aggregated dimensions of operational sustainability, R&D and new technologies and collaborative dynamics are the key dynamics underlying the intended outcomes. The findings also highlight the policy’s historical development, the stakeholder categories, the implications for each and practical recommendations in responding to the policy requirements. Additionally, the findings identify policy gaps, such as weak incentives and broad economic operator classifications, with examples from international markets. The regulation creates proactive stakeholders driving innovation and collaboration and reactive ones adapting to changes, where static implicit implications may affect their viability by imposing unequal burdens.

To the best of the authors’ knowledge, this paper is the first to analyze the new EU Regulation 2023/1542, offering novel insights into the strategic responses required by stakeholders to adapt to the regulatory pressures. By focusing on the latest regulatory framework and its practical implications, the study bridges the gap between policy and practice, providing valuable guidance for industry players navigating the evolving regulatory environment.

• (1)

  EU’s policy shift from Directive to Regulation (EU) 2023/1542 has extended implications on the Electric Vehicles battery sector.

• (2)

  Duel qualitative methods of text analysis and semi-structured interviews validated three aggregate dimensions and policy gaps.

• (3)

  R&D with advancing technology, Operational sustainability and safety and Collaboration dynamics are dominating the scene.

• (4)

  Emergence of Proactive vs Reactive stakeholder dynamics.

• (5)

  The broad classification of “economic operators” and insufficiently detailed incentives, hinting at potential competitive imbalances and underexplored roles of end-users in achieving circular economy goals are appearing policy’ gaps.

EU’s policy shift from Directive to Regulation (EU) 2023/1542 has extended implications on the Electric Vehicles battery sector.

Duel qualitative methods of text analysis and semi-structured interviews validated three aggregate dimensions and policy gaps.

R&D with advancing technology, Operational sustainability and safety and Collaboration dynamics are dominating the scene.

Emergence of Proactive vs Reactive stakeholder dynamics.

The broad classification of “economic operators” and insufficiently detailed incentives, hinting at potential competitive imbalances and underexplored roles of end-users in achieving circular economy goals are appearing policy’ gaps.

The purpose of this research is to address the complex multiobjective unrelated parallel machine scheduling problem with real-world constraints, including sequence-dependent setup times and periodic machine maintenance. The primary goal is to minimize total tardiness, earliness and total completion times simultaneously. This study aims to provide effective solution methods, including a Mixed-Integer Programming (MIP) model, an Epsilon-constraint method and the Nondominated Sorting Genetic Algorithm (NSGA-II), to offer valuable insights into solving large-sized instances of this challenging problem.

This study addresses a multiobjective unrelated parallel machine scheduling problem with sequence-dependent setup times and periodic machine maintenance activities. An MIP model is introduced to formulate the problem, and an Epsilon-constraint method is applied for a solution. To handle the NP-hard nature of the problem for larger instances, an NSGA-II is developed. The research involves the creation of 45 problem instances for computational experiments, which evaluate the performance of the algorithms in terms of proposed measures.

The research findings demonstrate the effectiveness of the proposed solution approaches for the multiobjective unrelated parallel machine scheduling problem. Computational experiments on 45 generated problem instances reveal that the NSGA-II algorithm outperforms the Epsilon-constraint method, particularly for larger instances. The algorithms successfully minimize total tardiness, earliness and total completion times, showcasing their practical applicability and efficiency in handling real-world scheduling scenarios.

This study contributes original value by addressing a complex multiobjective unrelated parallel machine scheduling problem with real-world constraints, including sequence-dependent setup times and periodic machine maintenance activities. The introduction of an MIP model, the application of the Epsilon-constraint method and the development of the NSGA-II algorithm offer innovative approaches to solving this NP-hard problem. The research provides valuable insights into efficient scheduling methods applicable in various industries, enhancing decision-making processes and operational efficiency.

This study aims to deepen the knowledge concerning the metal fused filament fabrication technology through an analysis of the printing parameters of a commercial 316L stainless steel filament and their influence on the porosity and mechanical properties of the printed parts. It also investigates the feasibility of manufacturing complex geometries, including strut-and-node and triply periodic minimal surface lattices.

A three-step experimental campaign was carried out. Firstly, the printing parameters were evaluated by analysing the green parts: porosity and density measurements were used to define the best printing profile. Then, the microstructure and porosity of the sintered parts were investigated using light optical and scanning electron microscopy, while their mechanical properties were obtained through tensile tests. Finally, manufacturability limits were explored with reference samples and cellular structures having different topologies.

The choice of printing parameters drastically influences the porosity of green parts. A printing profile which enables reaching a relative density above 99% has been identified. However, voids characterise the sintered components in parallel planes at the interfaces between layers, which inevitably affect their mechanical properties. Lattice structures and complex geometries can be effectively printed, debinded, and sintered if properly dimensioned to fulfil printing constraints.

This study provides an extensive analysis of the printing parameters for the 316L filament used and an in-depth investigation of the potential of the metal fused filament fabrication technology in printing lightweight structures.

This paper aims to examine the effects of the 2014 European regulatory reform on auditors’ activity, the audit outcome and the audit market, with a focus on the Spanish market.

The research is based on in-depth, semistructured interviews with partners of the main audit firms operating in the Spanish market. This qualitative approach provides a precise identification of the cause-effect relationships of the new measures introduced by the European audit regulation.

The findings indicate that, based on auditors’ opinions, the costs of the main regulatory changes outweigh the benefits. The European Union (EU) Audit Regulation imposes more demanding provisions, such as an extended auditor’s report, mandatory audit firm rotation, more banned nonaudit services and stricter quality controls, resulting in substantial side effects on audit activity and the audit market. This could undermine the objective of enhancing the quality of audit services.

To the best of the authors’ knowledge, this is the first study to analyze the effect of the 2014 EU regulatory reform on audit activity, audit market and audit outcome based on auditors’ perceptions. The findings may be of interest to academics, professionals and regulators alike, as they offer valuable insights for assessing the effectiveness of the new audit provisions. Additionally, the qualitative methodology used facilitates a causal analysis of the key elements introduced by the regulations, potentially paving the way for future research avenues.

Effective safety supervision plays a crucial role in ensuring safe production within coal mines. Conventional coal mine safety supervision (CMSS) in China has suffered from the problems of power-seeking, excessive resource consumption and poor timeliness. This paper aims to explore the Internet+ CMSS mode being emerged in China.

The evolution of CMSS systems underwent comprehensive scrutiny through a blend of qualitative and quantitative approaches. First, evolutionary game theory was used to analyze the necessity of incorporating Internet+ technology. Second, a system dynamics model of Internet+ CMSS was crafted, encompassing a system flow diagram and equations for various variables. The model was subsequently simulated by taking the W coal mine in Shanxi Province as a representative case study.

It was revealed that the expected safety profit from the Internet+ mode is 296.03% more than that from the conventional mode. The precise dissemination of law enforcement information was identified as a pivotal approach through which the Internet+ platform served as a conduit to foster synergistic collaboration among diverse elements within the system.

The outcomes of this study not only raise awareness about the potential of Internet+ technology in safety supervision but also establish a vital theoretical foundation for enhancing the efficacy of the Internet+ CMSS mode. The significance of these findings extends to fostering the wholesome and sustainable progress of the coal mining industry.

This research stands out as one of the limited studies that delve into the influence of Internet+ technology on CMSS. Building upon the pivotal approach identified, to the best of authors’ knowledge, a novel “multi-blind” working mechanism for Internet+ CMSS is introduced for the first time.

This study aims to examine the effects of the entry of foreign direct investments (FDIs) on the audit markets in developing countries (i.e. Egypt). There is a long-standing debate on the impact of FDIs on developing markets, but little is still known about the effect of FDI on national suppliers, such as audit firms.

This paper reports the results of a study that used qualitative research methods. It involves interviews with senior management teams of the Big 4 audit firms, to find out how these firms deal simultaneously with conflicting global and local influences. The interviews were complemented by the publicly available data on the firms’ websites as well as published reports related to the Egyptian economy and current investment regulations.

Drawing on the institutional theory, the findings suggest that an increased litigious environment, compliance with developed markets’ regulations, auditor regulatory sanctions and improved local accounting and auditing standards are highly significant consequences of foreign investment inflows. The findings indicate that more emphasis has been given to the quality of audit and auditors’ independence when auditing FDIs. Both audit regulators and audit firms in the domestic market pay higher attention to improving the quality of financial reports when FDIs have entered the market. More inspections and reviews for audit firms have been conducted, and local auditing and accounting standards have been revised to be in compliance with international standards.

Our results have important implications for investors, regulatory authorities and governments in relation to the development, implementation and enforcement of international financial reporting and auditing standards.

Policymakers and regulators in Egypt have responded to international pressure by revitalizing their local accounting and auditing standards and adopting international financial reporting and auditing standards. The authors identify strategies that have been adopted by audit firms to face the FDIs’ challenges.