Search results

There is a strong inducement to develop new inorganic materials to substitute the current industrial pigments, which are known for their poor ultraviolet absorbent and low photoluminescence (PL) properties. The purpose of this paper is to invent a better rare-earth-based pigment material as a spectral modifier with good luminescence properties to enhance the spectral response for photovoltaic panel application.

Different phosphor samples made of nano-calcium carbonate (CaCO₃) with varied wt.% of the dopant Dysprosium doped calcium borophosphate (CBP/Dy) as (W0 – 0%, W1 – 3,85%, W2 – 7.41%, W3 –10.71% and W4 –13.79%) were prepared via the solid-state diffusion method at 600 °C for 6 h using a muffle furnace. The structural, morphological and luminescence properties of the CaCO₃:CBP/Dy powder samples were examined using scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and PL test.

The XRD, SEM and FTIR results verified the crystalline formation, morphological behaviour and vibration bonds of synthesized CBP/Dy-doped CaCO₃ powder samples. XRD pattern revealed that the synthesized powder samples exhibit crystalline structured materials, and SEM results showed irregular shape and porous-like structured morphologies. FTIR spectrum shows prominent bands at 712, 874 and 1,404 cm⁻¹, corresponding to asymmetric stretching vibrations of CO3²⁻ groups and out-of-plane bending. PL characterization of CBP/Dy-doped CaCO₃ (sample W) shows emission at 427 nm (λmax) under the excitation of 358 nm. The intensity of PL emission spectra drops due to the concentration quenching effect, while the maximum PL intensity is observed in the W3 phosphor powder system.

This phosphor powder is expected to find out the potential application such as a spectral modifier which is applied to match the energy of photons with solar cell bandgap to improve spectral absorption and lead to better efficiency.

The introduction of a nano-CaCO₃:CBP/Dy hybrid powder system with good luminescence properties to be used as spectral modifiers for solar cell application has been synthesized in the lab, which is a novel attempt.

This study aims to improve detection efficiency of fluorescence biosensor or a graphene field-effect transistor biosensor. Graphene field-effect transistor biosensing and fluorescent biosensing were integrated and combined with magnetic nanoparticles to construct a multi-sensor integrated microfluidic biochip for detecting single-stranded DNA. Multi-sensor integrated biochip demonstrated higher detection reliability for a single target and could simultaneously detect different targets.

In this study, the authors integrated graphene field-effect transistor biosensing and fluorescent biosensing, combined with magnetic nanoparticles, to fabricate a multi-sensor integrated microfluidic biochip for the detection of single-stranded deoxyribonucleic acid (DNA). Graphene films synthesized through chemical vapor deposition were transferred onto a glass substrate featuring two indium tin oxide electrodes, thus establishing conductive channels for the graphene field-effect transistor. Using π-π stacking, 1-pyrenebutanoic acid succinimidyl ester was immobilized onto the graphene film to serve as a medium for anchoring the probe aptamer. The fluorophore-labeled target DNA subsequently underwent hybridization with the probe aptamer, thereby forming a fluorescence detection channel.

This paper presents a novel approach using three channels of light, electricity and magnetism for the detection of single-stranded DNA, accompanied by the design of a microfluidic detection platform integrating biosensor chips. Remarkably, the detection limit achieved is 10 pm, with an impressively low relative standard deviation of 1.007%.

By detecting target DNA, the photo-electro-magnetic multi-sensor graphene field-effect transistor biosensor not only enhances the reliability and efficiency of detection but also exhibits additional advantages such as compact size, affordability, portability and straightforward automation. Real-time display of detection outcomes on the host facilitates a deeper comprehension of biochemical reaction dynamics. Moreover, besides detecting the same target, the sensor can also identify diverse targets, primarily leveraging the penetrative and noninvasive nature of light.

The purpose of this study is to prepare a state-of-the-art review on advanced ceramic materials including their fabrication techniques, characteristics, applications and wettability.

This review paper presents the various types of advanced ceramic materials according to their compounding elements, fabrication techniques of advanced ceramic powders as well as their consolidation, their characteristics, applications and wetting properties. Hydrophobic/hydrophilic properties of advanced ceramic materials are described in the paper with their state-of-the-art application areas. Optical properties of fine ceramics with their intrinsic characteristics are also presented within. Special focus is given to the brief description of application-based manipulation of wetting properties of advanced ceramics in the paper.

The study of wetting/hydrophobicity/hydrophilicity of ceramic materials is important by which it can be further modified to achieve the required applications. It also makes some sense that the material should be tested for its wetting properties when it is going to be used in some important applications like biomedical and dental. Also, these advanced ceramics are now often used in the fabrication of filters and membranes to purify liquid/water so the study of wetting characteristics of these materials becomes essential. The optical properties of advanced ceramics are equally making them suitable for many state-of-the-art applications. Dental, medical, imaging and electronics are the few sectors that use advanced ceramics for their optical properties.

This review paper includes various advanced ceramic materials according to their compounding elements, different fabrication techniques of powders and their consolidation, their characteristics, various application area and hydrophobic/hydrophilic properties.

The purpose of this study is to optimize and improve conventional welding using EMF assisted technology. Current industrial production has put forward higher requirements for welding technology, so the optimization and improvement of traditional welding methods become urgent needs.

External magnetic field assisted welding is an emerging technology in recent years, acting in a non-contact manner on the welding. The action of electromagnetic forces on the arc plasma leads to significant changes in the arc behavior, which affects the droplet transfer and molten pool formation and ultimately improve the weld seam formation and joint quality.

In this paper, different types of external magnetic fields are analyzed and summarized, which mainly include external transverse magnetic field, external longitudinal magnetic field and external cusp magnetic field. The research progress of welding behavior under the effect of external magnetic field is described, including the effect of external magnetic field on arc morphology, droplet transfer and weld seam formation law.

However, due to the extremely complex physical processes under the action of the external magnetic field, the mechanism of physical fields such as heat, force and electromagnetism in the welding has not been thoroughly analyzed, in-depth theoretical and numerical studies become urgent.

The purpose of this paper is to improve the seal performance by proper design of the cavity shape of the damping holes, especially the rotordynamics characteristics of the hole-pattern damped seal (HPDS).

A new damping seal structure that comprises a circle-shaped cavity and two directional leaf-shaped cavities with a dovetail-shaped diversion groove is proposed. The comparative study on the sealing characteristics of dovetail-shape, leaf-shape and classical circular HPDSs was carried out using ANSYS CFX.

The dovetail-shaped HPDS significantly outperformed two other damping seal designs in leakage and rotordynamic performance. At a rotating speed of 7,500 rpm, it showed a 25% reduction in leakage, a 23% increase in average effective damping and a 119% increase in average effective stiffness. The cross-coupled stiffness K_xy shifted from positive to negative, reducing circumferential flow. The dovetail's inclined leaf-shaped grooves create a double vortex that slows jet velocity in the seal clearance and alters spiral flow direction, resulting in a uniform pressure distribution and enhanced rotor stability at low frequencies.

This study proposes a novel HPDS with dovetail-shaped diversion grooves. The seal can realize the simultaneous improvement of rotordynamics and leakage characteristics compared to the current seal structure.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-04-2024-0127/

This work measures the performance characteristics of a hemispherical resonator gyroscope (HRG) and compares it with a numerical model.

This work we explore the optical and piezoelectric measurement methods to determine the resonant frequency of HRG. These experimental results are compared with their numerically obtained values. To explore the performance characteristics, the effect of varying actuation voltages on the sense mode displacement and the piezoelectric sensor output was studied in the absence of input angular rate. The structure was then subjected to range of angular rate signals, at a constant actuation voltage and the corresponding sensor response was analysed.

Experimental values of the resonant frequencies in drive and sense modes are found to be within 8% of the numerical results. The sensor output depicts a quadratic dependency on the applied angular rate, which is synchronous with the governing equations of the HRG. The experimental output is within 12% of that obtained numerically. The sensor is found to resolve upto 0.24 rad/s.

This work presents an in-house developed inexpensive measurement setup for static and dynamic characterization of mesoscale MEMS gyroscopes. The measurement setup can also be modified accordingly for measurement of other MEMS-based devices.

This paper aims to study the tribological characteristics of the electrical contact system under different displacement amplitudes.

First, the risk frequency of real nuclear safety distributed control system (DCS) equipment is evaluated. Subsequently, a reciprocating friction test device which is characterized by a ball-on-flat configuration is established, and a series of current-carrying tribological tests are carried out at this risk frequency.

At risk frequency and larger displacement amplitude, the friction coefficient visibly rises. The reliability of the electrical contact system declines as amplitude increases. The wear morphology analysis shows that the wear rate increases significantly and the degree of interface wear intensifies at a larger amplitude. The wear area occupied by the third body layer increases sharply, and the appearance of plateaus on the surface leads to the increase of friction coefficient and contact resistance. EDS analysis suggests that oxygen elements progressively arise in the third layer as a result of increased air exposure brought on by larger displacement amplitude.

Results are significant for recognizing the tribological properties of electrical connectors in nuclear power control systems.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-03-2024-0098/

A highly selective cyanide phenoxazine-based fluorescence chemosensor POH was created to detect cyanide (CN) ions.

A malonitrile was added to a phenoxazine fluorophore to make this widely available chemosensor. By fluorescence spectroscopy, the sensor POH showed turn-off fluorescence emission for CN with 2:1 binding stoichiometry in CH₃CN/H₂O (90:10 v/v) medium.

The detection limits for CN were 9.8 × 10⁻⁹ M, which were much lower than WHO standards. NMR and FT-IR investigations backed up the suggested sensor POH mechanism.

The detection CN method should be applicable in a number of situations, where the CN anion for fresh water and drinking water has to be quickly and accurately analyzed.

Understanding the mechanical and thermal behavior of materials is the goal of the branch of study known as fractional thermoelasticity, which blends fractional calculus with thermoelasticity. It accounts for the fact that heat transfer and deformation are non-local processes that depend on long-term memory. The sphere is free of external stresses and rotates around one of its radial axes at a constant rate. The coupled system equations are solved using the Laplace transform. The outcomes showed that the viscoelastic deformation and thermal stresses increased with the value of the fractional order coefficients.

The results obtained are considered good because they indicate that the approach or model under examination shows robust performance and produces accurate or reliable results that are consistent with the corresponding literature.

This study introduces a proposed viscoelastic photoelastic heat transfer model based on the Moore-Gibson-Thompson framework, accompanied by the incorporation of a new fractional derivative operator. In deriving this model, the recently proposed Caputo proportional fractional derivative was considered. This work also sheds light on how thermoelastic materials transfer light energy and how plasmas interact with viscoelasticity. The derived model was used to consider the behavior of a solid semiconductor sphere immersed in a magnetic field and subjected to a sudden change in temperature.

This study introduces a proposed viscoelastic photoelastic heat transfer model based on the Moore-Gibson-Thompson framework, accompanied by the incorporation of a new fractional derivative operator. In deriving this model, the recently proposed Caputo proportional fractional derivative was considered. This work also sheds light on how thermoelastic materials transfer light energy and how plasmas interact with viscoelasticity. The derived model was used to consider the behavior of a solid semiconductor sphere immersed in a magnetic field and subjected to a sudden change in temperature.

Industrial drivetrains use wet disk clutches for safe and reliable shifting. Advances over the past decades regarding the formulation of lubricants and the composition of friction materials have led to reliable clutch systems. In this context, the friction behavior is crucial for the correct operation of the clutch. Nevertheless, the friction behavior and its influencing factors are still the object of modern research. The purpose of this study is to investigate how the choice of the steel disk influences the noise vibration and harshness (NVH) behavior of wet industrial clutches.

To investigate the influence of the steel disk on the friction and NVH behavior of industrial wet disk clutches, experimental investigations with relevant friction systems are conducted. These tests are performed at two optimized test rigs, guaranteeing transferable insights. The surface topography of the steel disk and the friction lining are measured for one friction system to identify possible relations between the surface topography and the friction behavior.

The steel disk can influence the friction behavior of wet disk clutches. Using a different steel disk surface finish, corresponding results can show differences in the shudder tendency, leading to a nonfavorable NVH behavior – different gradients of the coefficient of friction over sliding velocity cause this phenomenon.

This work gives novel insights into the friction and NVH behavior of industrial wet disk clutches. It supports engineers in the optimization of modern friction systems.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-02-2024-0054/