Search results

The aim of this study is to present an overview of sustainable practices in the development of waterproof breathable fabrics for garments. It aims to provide insights into the current state of academic research in this domain and identify and analyze major sustainable trends in the field.

This study conducts a thorough examination of research publications sourced from the Scopus database spanning the years 2013–2023 by employing a systematic approach. The research utilizes both descriptive analysis and content analysis to identify trends, notable journals and leading countries in sustainable waterproof breathable fabric development.

The study reveals a notable increase in studies focusing on sustainable approaches in the development of waterproof breathable fabrics for garments. Descriptive analysis highlights the most prominent journal and leading country in terms of research volume. Content analysis identifies four key trends: minimizing chemical usage, developing easily degradable materials, creating fabrics promoting health and well-being and initiatives to reduce energy consumption.

The main limitation of this research lies in its exclusive reliance on the Scopus database.

The insights derived from this study offer practical guidance for prospective researchers interested in investigating sustainable approaches to developing waterproof breathable fabric for garments. The identified trends provide a foundation for aligning research endeavors with contemporary global perspectives, facilitating the integration of sustainable methodologies into the garment industry.

This systematic literature review contributes original insights by synthesizing current research trends and outlining evolving sustainable practices in the development of waterproof breathable fabrics. The identification of key focus areas adds a novel perspective to existing knowledge.

The purpose of this paper is to study the correlation between different topographies and the reaction of Ulva Linza fouling species.

In this research, topographies with a different method, such as hot embossing and hot pulling, were achieved, and biological analyses were done with macroalgae Ulva Linza cells. The effect of topography via local binding geometry (honeycomb size gradients) and Wenzel roughness on the settling of Ulva microorganisms was tested.

As a result, Ulva spores confirmed different reactions to a similar set of tapered microstructures that was in agreement with the results on distinct honeycombs. The local binding geometry and the Wenzel roughness factor “r” were dominant on settling of Ulva Linza spores.

The reaction of an organism at the interface of vehicles’ substrate is powerfully affected by surface topographies.

The best embedment occurred on structures with bigger sizes than Ulva Linza’s spores. The density of settled spores was proportional to Wenzel roughness and the spores favour to attach to “kink sites” positions.

Unfortunately, unpleasant aggregation of marine biofouling on marine vehicles’ surfaces, generate terrific difficulties in the relevant industry.

There was a sharp relationship between Wenzel roughness and settle of Ulva Linza spores. The local binding geometry and the Wenzel roughness factor “r” were dominant on settling of Ulva Linza spores.

Globally, consumer’s inclination towards functional foods had noticed due to their greater health consciousness coupled with enhanced health-care cost. The fact that probiotics could promote a healthier gut microbiome led projection of probiotic foods as functional foods and had emerged as an important dietary strategy for improved human health. It had established that ice cream was a better carrier for probiotics than fermented milked due to greater stability of probiotics in ice cream matrix. Global demand for ice cream boomed and probiotic ice cream could have been one of the most demanded functional foods. The purpose of this paper was to review the technological aspects and factors affecting probiotic viability and to standardize methodology to produce functional probiotic ice cream.

Attempt was made to search the literature (review and researched papers) to identify diverse factors affecting the probiotic viability and major technological challenge faced during formulation of probiotic ice cream. Keywords used for data searched included dairy-based functional foods, ice cream variants, probiotic ice cream, factors affecting probiotic viability and health benefits of probiotic ice cream.

Retention of probiotic viability at a level of >10⁶ cfu/ml is a prerequisite for functional probiotic ice creams. Functional probiotic ice cream could have been produced with the modification of basic mix and modulating technological parameters during processing and freezing. Functionality can be further enhanced with the inclusion of certain nutraceutical components such as prebiotics, antioxidant, phenolic compounds and dietary fibres. Based upon reviewed literature, suggested method for the manufacture of functional probiotic ice cream involved freezing of a probiotic ice cream mix obtained by blending 10% probiotic fermented milk with 90% non-fermented plain ice cream mix for higher probiotic viability. Probiotic ice cream with functional features, comparable with traditional ice cream in terms of technological and sensory properties could be produced and can crop up as a novel functional food.

Probiotic ice cream with functional features may attract food manufacturers to cater health-conscious consumers.

Three-dimensional (3D) printing is popular for many applications including the production of photocatalysts. This paper aims to focus on developing of 3D-printed photocatalyst-nano composite lattice structure. Digital light processing (DLP) 3D printing of photocatalyst composites was performed using photosensitive resin mixed with 0.5% Wt. of TiO₂ powder and varying amounts (0.025% Wt. to 0.2% Wt.) of graphene nanoplatelet powder. The photocatalytic efficiency of DLP 3D-printed photocatalyst TiO₂ composite was investigated, and the effects of nano graphite powder incorporation on the photocatalytic activity, thermal and mechanical properties were investigated.

Methods involve 3D computer-aided design modeling, printing parameters and comprehensive characterization techniques such as structural equation modeling, X-ray diffraction, thermogravimetric analysis, Fourier-transform infrared (FTIR) and mechanical testing.

Results highlight successful dispersion and characteristics of TiO₂ and graphene nanoplatelet (GNP) powders, intricate designs of 3D-printed lattice structures, and the influence of GNPs on thermal behavior and mechanical properties.

The study suggests applicability in wastewater treatment and environmental remediation, showcasing the adaptability of 3 D printing in designing effective photocatalysts. Future research should focus on practical applications and the long-term durability of these 3D-printed composites.

Improving productivity and efficiency has always been crucial for industrial companies to remain competitive. In recent years, the topic of environmental impact has become increasingly important. Published research indicates that environmental and economic goals can enforce or rival each other. However, few papers have been published that address the interaction and integration of these two goals.

In this paper, we identify both, synergies and trade-offs based on a systematic review incorporating 66 publications issued between 1992 and 2021. We analyze, quantify and cluster examples of conjunctions of ecological and economic measures and thereby develop a framework for the combined improvement of performance and environmental compatibility.

Our findings indicate an increased significance of a combined consideration of these two dimensions of sustainability. We found that cases where enforcing synergies between economic and ecological effects were identified are by far more frequent than reports on trade-offs. For the individual categories, cost savings are uniformly considered as the most important economic aspect while, energy savings appear to be marginally more relevant than waste reduction in terms of environmental aspects.

No previous literature review provides a comparable graphical treatment of synergies and trade-offs between cost savings and ecological effects. For the first time, identified measures were classified in a 3 × 3 table considering type and principle.

In developing countries, construction organizations are seeking to effectively implement green innovation strategies. Thus, this study aims to assess the importance of green innovation practices and develop a measurement model for quantifying the green innovation degrees of construction firms.

A mixed-methods research approach is adopted. First, an extensive literature review is performed to identify potential green innovation items, which are then used to design a preliminary questionnaire. Next, expert interviews are conducted to pilot-test this questionnaire. Subsequently, by using a convenience non-probability sampling method, 88 valid responses are collected from construction firms in Vietnam. Then, one-sample and independent-samples t tests are employed to assess the importance of green innovation practices. Fuzzy synthetic evaluation (FSE) is also applied to quantitatively compare such practices. Finally, green innovation level (GIL) is proposed to measure the green innovation indexes and validated by a case study of seven construction firms.

This study identifies 13 green innovation variables, of which several key practices are highlighted for small/medium and large construction firms. The results of FSE analysis indicate that green process innovation is the most vital green category in construction firms, followed by green product and management innovations, respectively. As a quantitative measure, GIL could allow construction firms to frequently evaluate their green innovation indexes, thereby promoting green innovation practices comprehensively. Hence, construction firms would significantly enhance green competitive advantages and increasingly contribute to green and sustainable construction developments.

This research is one of the first attempts to integrate various green innovation practices into a comprehensive formulation. The established indexes offer detailed green innovation evaluations, which could be considered as valuable references for construction practitioners. Furthermore, a reliable and practical tool (i.e. GIL) is proposed to measure the GILs of construction firms in developing countries.

Green transformation is more than simply a trend; it is a way of life, a set of habits, a field of knowledge and a dedication to resource conservation. Going green is surely a creative and transformative process for both individuals and organizations. This paper aims to “identify,” “analyse” and “categorise” the readiness factors for green transformation process in health care using total interpretive structural modelling (TISM) and neutrosophic-MICMAC.

To address the study objectives, the study used TISM and neutrosophic-MICMAC analysis. To identify the readiness factors, a literature study was conducted, and the factors were face-validated by the healthcare experts. The factors influence on one another were captured by using a scheduled interview with a closed ended questionnaire. The TISM addressed the identification and analysing of factors and the categorization and ranking the readiness factors is addressed by using neutrosophic-MICMAC analysis.

This study identified 11 green transformation process readiness factors for healthcare organizations. The study states that the key factors or driving factors are awareness of green governance principle, environment leadership and management, green gap analysis, information and communication technology and innovation dynamics.

The factor ranking is sensitive to the respondents’ ratings. The study relied on the past literature and experts’ opinion may result in the subjective biases. The complex nature of healthcare ecosystem challenges to capture all the factors. The study focussed on Indian hospitals.

Study significantly impacts the healthcare practitioners, academicians and policymakers by providing critical insights into the readiness factors required for the healthcare green transformation process. The study offers a better understanding of the crucial or key or driving factors that aid in embracing green and sustainable practices.

Identifying a gap in conceptual and theoretical frameworks for green transformation readiness factors in healthcare organizations and in Indian context. The study addresses this gap by aiming to create a thorough theoretical framework and highlighted by its focus on Indian hospitals.

This study aims to understand the sustainable development of small and medium-sized enterprises (SMEs), analysing their current practices in the social, environmental and economic domain.

To fulfil this objective, an exploratory, qualitative approach was adopted, using the multiple case study methodology and focusing on eight cases (SMEs) in Portugal. Data were collected through interviews, since this technique allows proximity and interaction with decision makers and those responsible for firms’ sustainability.

From content analysis of the interviews held, the results show that SMEs are aware of and committed to sustainability and that the external context and some of its particularities have a significant impact on their sustainable development. These SMEs undertake various practices of a social, environmental and economic nature, highlighting especially environmental ones such as efficient resource consumption, using more sustainable resources, recycling waste and waste management.

This study contributes greater knowledge of the phenomenon of SMEs’ sustainable development and identifies practical examples that could increase this firm segment’s awareness of the importance of sustainable practices associated with developing their business.

In this study, new and innovative sustainability practices are presented in the SMEs. The authors can underline that this study contributes to reinforcing the theory about the topic investigated by adding knowledge about sustainable development in the SME context. It deepens knowledge in this scientific area, which can be spread in the scientific community and among SMEs.

Understanding the role of corporate strategies in sustainability has become a hot topic for scholarly research. Meanwhile, firms strive to innovate and shape their positive image in the contemporary business arena. Past research has ignored investigating whether and how sustainability-oriented corporate strategies could drive innovation and firm image among external stakeholders. To address the said research gap, this paper examines the path through which sustainability-oriented corporate strategy and environmental regulation improve green corporate image and green innovation capabilities (i.e. green process and product innovation).

This study adopted a quantitative survey-based method. The online survey was adopted to collect data from employees working at the managerial level in the equipment manufacturing sector. The data collected from 343 managers that was complete in all aspects was used for empirical analysis using structural equation modeling. Direct and indirect relations were evaluated.

The findings reveal that sustainability-oriented corporate strategy and environmental regulation drive green innovation and green corporate image. Findings further show that external knowledge adoption underpins these effects of sustainability-oriented corporate strategy and environmental regulation.

The study delivers theoretical and practical understandings of the importance of sustainability-oriented corporate strategies to green corporate image and green innovation capabilities.