Search results

Automatic modulation recognition (AMR) is a challenging problem in intelligent communication systems and has wide application prospects. At present, although many AMR methods based on deep learning have been proposed, the methods proposed by these works cannot be directly applied to the actual wireless communication scenario, because there are usually two kinds of dilemmas when recognizing the real modulated signal, namely, long sequence and noise. This paper aims to effectively process in-phase quadrature (IQ) sequences of very long signals interfered by noise.

This paper proposes a general model for a modulation classifier based on a two-layer nested structure of long short-term memory (LSTM) networks, called a two-layer nested structure (TLN)-LSTM, which exploits the time sensitivity of LSTM and the ability of the nested network structure to extract more features, and can achieve effective processing of ultra-long signal IQ sequences collected from real wireless communication scenarios that are interfered by noise.

Experimental results show that our proposed model has higher recognition accuracy for five types of modulation signals, including amplitude modulation, frequency modulation, gaussian minimum shift keying, quadrature phase shift keying and differential quadrature phase shift keying, collected from real wireless communication scenarios. The overall classification accuracy of the proposed model for these signals can reach 73.11%, compared with 40.84% for the baseline model. Moreover, this model can also achieve high classification performance for analog signals with the same modulation method in the public data set HKDD_AMC36.

At present, although many AMR methods based on deep learning have been proposed, these works are based on the model’s classification results of various modulated signals in the AMR public data set to evaluate the signal recognition performance of the proposed method rather than collecting real modulated signals for identification in actual wireless communication scenarios. The methods proposed in these works cannot be directly applied to actual wireless communication scenarios. Therefore, this paper proposes a new AMR method, dedicated to the effective processing of the collected ultra-long signal IQ sequences that are interfered by noise.

Environmental degradation resulting from human activities may adversely affect human health in multiple ways. Until now, policies aimed at mitigating environmental problems such as climate change, environmental pollution and damage to biodiversity have failed to clearly identify and drive the potential benefits of these policies on health. The conducted study assesses and demonstrates how specific environmental policies and instruments influence perceived human health in order to ensure input for a data-driven decision process.

The study was conducted for the 2004–2020 period in European Union (EU) countries with the use of dynamic panel data modeling. Verification of specific policies' impact on dependent variables allows to indicate this their effectiveness and importance. As a result of the computed dynamic panel data models, it has been confirmed that a number of significant and meaningful relationships between the self-perceived health index and environmental variables can be identified.

There is a strong positive impact of environmental taxation on the health index, and the strength of this relationship causes effects to be observed in the very short term, even the following year. In addition, the development of renewable energy sources (RES) and the elimination of fossil fuels from the energy mix exert positive, although milder, effects on health. The reduction of ammonia emissions from agriculture and reducing noise pollution are other health-supporting factors that have been shown to be statistically valid. Results allow to identify the most efficient policies in the analyzed area in order to introduce those with the best results or a mix of such measures.

The results of the authors' research clearly indicate the health benefits of measures primarily aimed at improving environmental factors, such as environmental taxes in general. The authors have also discovered an unexpected negative impact of an increase in the share of energy taxes in total taxes on the health index. The presented study opens several possibilities for further investigation, especially in the context of the rapidly changing geopolitical environment and global efforts to respond to environmental and health challenges. The authors believe that the outcome of the authors' study may provide new arguments to policymakers pursuing solutions that are not always easily acceptable by the public.

Food is a key element in tourism experiences. This study aims to investigate the interplay of sensory and non-sensory factors in food tourism experiences and models their influence on satisfaction and behavioural intentions.

The study focuses on the culinary experiences of 304 tourists dining at ethnic restaurants and uses causal relationship discovery modelling to analyse data.

Sensory factors are important in tourists’ culinary experiences with cleanliness, noise levels and room temperature at the top of the causal chain. Results also indicate the interplay between sensory and non-sensory factors to explain overall satisfaction, intention to return and intention to say positive things.

Using embodied cognition theory, the study offers novel insights into the role of senses in food tourism experiences at rural destinations.

美食是乡村旅游的主要吸引物之一。本研究的目的是调查游客在用餐体验中感官和非感官因素的相互作用, 以及这些因素如何影响游客的满意度和行为意愿。

本研究使用因果关系建模的方法来分析 304 名在某地方特色餐厅用餐的游客的问卷数据。

结果显示, 对于游客的用餐体验而言, 感官和非感官因素具备同等的重要性。此外, 结果发现, 游客感知到的噪音水平、适宜的室内温度及清洁度在与其他因素的相互作用中非常重要, 并能激发游客的满意度和重游意愿。

基于认知理论, 本研究为更好地理解感官因素和非感观因素在乡村旅游情境下的游客用餐体验中的作用提供了新的知识。

La comida es un elemento clave en las experiencias turísticas. Este estudio investiga la interacción de factores sensoriales y no sensoriales en las experiencias de turismo gastronómico y modela su influencia en la satisfacción y las intenciones de comportamiento.

El estudio se centra en las experiencias culinarias de 304 turistas que cenan en restaurantes étnicos y utiliza modelos de descubrimiento de relaciones causales para analizar los datos.

Los factores sensoriales son importantes en las experiencias culinarias de los turistas con la limpieza, los niveles de ruido y la temperatura ambiente en la parte superior de la cadena causal. Los resultados también indican la interacción entre factores sensoriales y no sensoriales para explicar la satisfacción general, la intención de regresar y la intención de decir cosas positivas.

Utilizando la teoría de la cognición incorporada, el estudio ofrece nuevos conocimientos sobre el papel de los sentidos en las experiencias de turismo gastronómico en destinos rurales.

Evaluating the implementation of environmental management plans (EMPs) in highway construction projects is essential to avoid climate change. Public evaluations can help ensure that the EMP is implemented correctly and efficiently. To allow public evaluation of EMP implementations, this study aims to investigate performance indicators (PIs) for assessing EMP implementation in highway construction projects. To that end, the study objectives are to compare the critical PIs between environment auditors (EAs) and environment officers (EOs) and among the main project stakeholders (i.e. clients, contractors and consultants), create components for the critical PIs and assess the efficiency of the components.

The paper identified 39 PIs from interviews with environmental professionals and a systematic literature review. Then a questionnaire survey was developed based on the PIs and sent to EAs and EOs. The data were analyzed via mean score ranking, normalization, agreement analysis, factor analysis and fuzzy synthetic evaluation (FSE).

The analyses revealed 21 critical PIs for assessing EMP implementation in highway construction projects. Also, the critical PIs can be grouped into four components: ecological, pollution, public safety and ecological. Finally, the overall importance of the critical PIs from the FSE is between important and very important.

To the best of the authors’ knowledge, this paper is the first-of-its-kind study on the critical PIs for assessing EMP implementation in highway construction projects.

The purpose of this paper is to develop a prototype of a wearable medical device in the form of a bandage with a real-time data monitoring platform, which can be used domestically for diabetic patients to identify the possibility of foot ulceration at the early stage.

The prototype can measure blood volumetric change and temperature variation in the forefoot area simultaneously. The waveform extracted using a pulsatile-blood-flow signal was used to assess blood perfusion-related information, and hence, predict ischemic ulcers. The temperature difference between ulcerated and the reference was used to predict neuropathic ulcers. The medical device can be used as a bandage during the application wherein the sensory module is placed inside the hollow pocket of the bandage. A platform was developed through a mobile application where doctors can extract real-time information, and hence, determine the possibility of ulceration.

The height of the peaks in the pulsatile-blood-flow signal measured from the subject with foot ischemic ulcers is significantly less than that of the subject without ischemic ulcers. In the presence of ischemic ulcers, the captured waveform flattens. Therefore, the blood perfusion from arteries to the tissue of the forefoot is considerably low for the subject with ischemic ulcers. According to the temperature difference data measured over 25 consecutive days, the temperature difference of the subject with neuropathic ulcers occasionally exceeded the 4 °F range but mostly had higher values closer to the 4 °F range. However, the temperature difference of the subject who had no complications of neuropathic ulcers did not exceed the 4 °F range, and the majority of the measurements occupy a narrow range from −2°F to 2 °F.

The proposed prototype of wearable medical apparatus can monitor both temperature variation and pulsatile-blood-flow signal on the forefoot simultaneously and thereby predict both ischemic and neuropathic diabetes using a single device. Most importantly, the wearable medical device can be used domestically without clinical assistance with a real-time data monitoring platform to predict the possibility of ulceration and the course of action thereof.

This paper aims to identify how a public client’s use of control systems (process, output and social control) affect innovation possibilities in construction projects.

Semi-structured interviews about six infrastructure projects were conducted to identify respondents’ views on innovation possibilities. These possibilities were then analyzed from an organizational control perspective within principal–agent relationships between the Swedish Transport Administration (STA) and their contractors.

How the client uses control systems affects innovation possibilities. Relying on process control could negatively affect innovation opportunities, whereas output control could have a positive influence. In addition, social control seems to have a weak effect, as the STA appears not to use social control to facilitate joint innovation. Public clients must comply with the Public Procurement Act and, therefore, retain the requirements specified in the tendering documents. Much of the steering of the execution is connected to the ex ante phase (before signing the contract), which affects innovation possibilities in the design and execution phases for the contractor.

This study was conducted with only one client, thus limiting its generalizability. However, the findings provide an important stepping stone to further investigation into balancing control systems and creating innovation possibilities in a principal–agent relationship.

Although public procurement has increasingly been emphasized as a major potential source of innovation, studying how a public client’s use of organizational control systems affects innovation possibilities in the construction sector has received scant attention.

Land value varies at a micro level depending on the location’s economic, geographical and political determinants. The purpose of this study is to present a comprehensive assessment of the determinants affecting land value in the Indian city of Thiruvananthapuram in the state of Kerala.

The global influence of the identified 20 explanatory variables on land value is measured using the traditional hedonic price modeling approach. The localized spatial variations of the influencing parameters are examined using the non-parametric regression method, geographically weighted regression. This study used advertised land value prices collected from Web sources and screened through field surveys.

Global regression results indicate that access to transportation facilities, commercial establishments, crime sources, wetland classification and disaster history has the strongest influence on land value in the study area. Local regression results demonstrate that the factors influencing land value are not stationary in the study area. Most variables have a different influence in Kazhakootam and the residential areas than in the central business district region.

This study confirms findings from previous studies and provides additional evidence in the spatial dynamics of land value creation. It is to be noted that advanced modeling approaches used in the research have not received much attention in Indian property valuation studies. The outcomes of this study have important implications for the property value fixation of urban Kerala. The regional variation of land value within an urban agglomeration shows the need for a localized method for land value calculation.

This study aims to propose a unique algorithm-based hysteresis current control technique (HCCT) for induction motor using a single-phase voltage source inverter (SPVSI) to eliminate both sub and inter harmonics (SIH) and electromagnetic interference (EMI). The total harmonic distortion (THD) of the load current also reduces in comparison to standard HCCT and modified technique-based existing HCCT.

Matlab simulation has been carried out to develop an SPVSI model and the unique algorithm-based HCCT. The same platform has also been used to develop a few existing HCCTs such as standard, dual-band and modified. The switching frequency and harmonic analysis of load currents for all the HCCTs have been compared in the paper. The hardware implementation of the proposed algorithm-based HCCT was also verified and compared with the simulation results.

The proposed unique algorithm-based HCCT provides the benefits of both unipolar and bipolar switching techniques. It reduces the switching frequency as unipolar switching scheme and eliminates the EMI. It also reduces THD and nullifies SIH of the load current. This enables an improvement in the overall performance and efficiency of the motor.

This proposed HCCT eliminates the SIH and improves the overall efficiency of the motor, hence can prevent overheating, vibration, acoustic noise, pulsating torque and braking of the rotor shaft of the motor and increasing the reliability of the system.

It can be implemented for the motors that are used in household applications and electric vehicles through one-phase inverter.

This proposed HCCT has detected the zero crossing point of reference current, allowed samples and shifted the necessary amount of hysteresis band at zero crossing region to eliminate SIH and THD.

The increasing globalization and technological advancements have increased the information spillover on stock markets from various variables. However, there is a dearth of a comprehensive review of how stock market volatility is influenced by macro and firm-level factors. Therefore, this study aims to fill this gap by systematically reviewing the major factors impacting stock market volatility.

This study uses a combination of bibliometric and systematic literature review techniques. A data set of 54 articles published in quality journals from the Australian Business Deans Council (ABDC) list is gathered from the Scopus database. This data set is used to determine the leading contributors and contributions. The content analysis of these articles sheds light on the factors influencing market volatility and the potential research directions in this subject area.

The findings show that researchers in this sector are becoming more interested in studying the association of stock markets with “cryptocurrencies” and “bitcoin” during “COVID-19.” The outcomes of this study indicate that most studies found oil prices, policy uncertainty and investor sentiments have a significant impact on market volatility. However, there were mixed results on the impact of institutional flows and algorithmic trading on stock volatility, and a consensus cannot be established. This study also identifies the gaps and paves the way for future research in this subject area.

This paper fills the gap in the existing literature by comprehensively reviewing the articles on major factors impacting stock market volatility highlighting the theoretical relationship and empirical results.

This paper aims to study the influence of microparticles on the surface cavitation behavior of 2Cr3WMoV steel; microparticle suspensions of different concentration, particle size, material and shape were prepared based on ultrasonic vibration cavitation experimental device.

2Cr3WMoV steel was taken as the research object for ultrasonic cavitation experiment. The morphology, quantity and distribution of cavitation pits were observed and analyzed by metallographic microscope and scanning electron microscope.

The study findings showed that the surface cavitation process produced pinhole cavitation pits on the surface of 2Cr3WMoV steel. High temperature in the process led to oxidation and carbon precipitation on the material surface, resulting in the “rainbow ring” cavitation morphology. Both the concentration and size of microparticles affected the number of pits on the material surface. When the concentration of microparticles was 1 g/L, the number of pits reached the maximum, and when the size of microparticles was 20 µm, the number of pits reached the minimum. The microparticles of Fe3O4, Al2O3, SiC and SiO2 all increased the number of pits on the surface of 2Cr3WMoV steel. In addition, the distribution of pits of spherical microparticles was more concentrated than that of irregularly shaped microparticles in turbidity.

Most of the current studies have not systematically focused on the effect of each factor of microparticles on the cavitation behavior when they act separately, and the results of the studies are more scattered and varied. At the same time, it has not been found to carry out the study of microparticle cavitation with 2Cr3WMoV steel as the research material, and there is a lack of relevant cavitation morphology and experimental data.