Search results

The transpiration has been recognized as one of the most effective thermal protection methods for future hypersonic vehicles. To improve efficiency and safety, it is urgent to optimize the design of the transpiration system for heat and drag reduction. The purpose of this paper is to investigate the effects of transpiration on heat and drag reduction.

A chemical nonequilibrium flow model with the transpiration is established by using Navier–Stokes equations, the shear-stress transport turbulence model, thermodynamic properties and the Gupta chemical kinetics model. The solver programmed for this model is verified by comparing with experimental results in the literature. Effects of air injection on the flow field, the aerodynamic resistance and the surface heat flux are calculated with the hypersonic flow past a blunt body. Furthermore, a modified blocking coefficient formula is proposed.

Numerical results show that the transpiration can reduce the aerodynamic resistance and the surface heat flux observably and increase the shock wave standoff distance slightly. It is also manifested that the modified formula is in better agreement with the wind tunnel test results than the original formula.

The modified formula can expand the application range of the engineering method for the blocking coefficient. This study will be beneficial to carry out the optimal design of the transpiration system.

This paper aims to present the steady dual solutions on three-dimensional flow and heat transfer of nanofluid over a permeable non-linearly shrinking surface with two-order velocity slips conditions. Boundary layer assumption is considered in the mathematical modelling. Authors comprehend from previous studies and papers that the shrinking surfaces are extremely important in current engineering and environmental systems.

Using appropriate similarity variables, the full partial differential equations (PDF) are modified into a specific set of ordinary (similar) differential equations (ODE). The resulting non-linear ordinary differential system is then solved both analytically for some particular cases and numerically for the general case using the function bvp4c from MATLAB for characteristic values of the parameters which govern the equations. The transformed mathematical model is analysed using the bvp4c procedure. Based on the given assumptions, this study is able to produce multiple solutions of the problem.

The ordinary (similarity) differential equations have two branches solutions, upper and lower branch solutions, given some interval of shrinking and velocity slip parameters. The authors consider here a temporal stability analysis, as they want to establish which of the solutions are stable and which are not. In a distinct paragraph, the authors discuss in detail and present in a graphical manner the effects of shrinking and second-order slip flow model on the skin friction coefficient, surface wall heat flux and dimensionless velocity and temperature profiles. The analysis reveals that the second order slip has a big influence on the flow and heat transfer characteristics.

The present discoveries are unique and truly new for the research of the three-dimensional stretching/shrinking forced convection flow and heat transfer nanofluids. The nanofluid is a water-based nanofluid (H₂O), which contains one type of nanoparticles, namely, copper (Cu). Of course, the analysis can be further extended considering other types of nanoparticles such as alumina (Al₂O₃). The authors assume that the thermal equilibrium is reached for the base fluid together with the suspended nanoparticles and that the nanoparticles are uniform in dimension and form.

This paper aims to establish a lattice Boltzmann (LB) method for solid-liquid phase transition (SLPT) from the pore scale to the representative elementary volume (REV) scale. By applying this method, detailed information about heat transfer and phase change processes within the pores can be obtained, while also enabling the calculation of larger-scale SLPT problems, such as shell-and-tube phase change heat storage systems.

Three-dimensional (3D) pore-scale enthalpy-based LB model is developed. The computational input parameters at the REV scale are derived from calculations at the pore scale, ensuring consistency between the two scales. The approaches to reconstruct the 3D porous structure and determine the REV of metal foam were discussed. The implementation of conjugate heat transfer between the solid matrix and the solid−liquid phase change material (SLPCM) for the proposed model is developed. A simple REV-scale LB model under the local thermal nonequilibrium condition is presented. The method of bridging the gap between the pore-scale and REV-scale enthalpy-based LB models by the REV is given.

This coupled method facilitates detailed simulations of flow, heat transfer and phase change within pores. The approach holds promise for multiscale calculations in latent heat storage devices with porous structures. The SLPT of the heat sinks for electronic device thermal control was simulated as a case, demonstrating the efficiency of the present models in designing and optimizing SLPT devices.

A coupled pore-scale and REV-scale LB method as a numerical tool for investigating phase change in porous materials was developed. This innovative approach allows for the capture of details within pores while addressing computations over a large domain. The LB method for simulating SLPT from the pore scale to the REV scale was given. The proposed method addresses the conjugate heat transfer between the SLPCM and the solid matrix in the enthalpy-based LB model.

The purpose of this paper is to study the aerodynamic characteristics of Ahmed body in longitudinal and lateral platoons under crosswind by computational fluid dynamics simulation. It helps to improve the aerodynamic characteristics of vehicles by providing theoretical basis and engineering direction for the development and progress of intelligent transportation.

A two-car platoon model is used to compare with the experiment to prove the accuracy of the simulation method. The simplified Ahmed body model and the Reynolds Averaged N-S equation method are used to study the aerodynamic characteristics of vehicles at different distances under cross-winds.

When the longitudinal distance x/L = 0.25, the drag coefficients of the middle and trailing cars at β = 30° are improved by about 272% and 160% compared with β = 10°. The side force coefficients of the middle and trailing cars are increased by 50% and 62%. When the lateral distance y/W = 0.25, the side force coefficients of left and middle cars at β = 30° are reduced by 38% and 37.5% compared with β = 10°. However, the side force coefficient of the right car are increased by about 84.3%.

Most of the researches focus on the overtaking process, and there are few researches on the neat lateral platoon. The innovation of this paper is that in addition to studying the aerodynamic characteristics of longitudinal driving, the aerodynamic characteristics of neat lateral driving are also studied, and crosswind conditions are added. The authors hope to contribute to the development of intelligent transportation.

This paper aims to present an unconditionally energy-stable scheme for approximating the convective heat transfer equation.

The scheme stems from the generalized positive auxiliary variable (gPAV) idea and exploits a special treatment for the convection term. The original convection term is replaced by its linear approximation plus a correction term, which is under the control of an auxiliary variable. The scheme entails the computation of two temperature fields within each time step, and the linear algebraic system resulting from the discretization involves a coefficient matrix that is updated periodically. This auxiliary variable is given by a well-defined explicit formula that guarantees the positivity of its computed value.

Compared with the semi-implicit scheme and the gPAV-based scheme without the treatment on the convection term, the current scheme can provide an expanded accuracy range and achieve more accurate simulations at large (or fairly large) time step sizes. Extensive numerical experiments have been presented to demonstrate the accuracy and stability performance of the scheme developed herein.

This study shows the unconditional discrete energy stability property of the current scheme, irrespective of the time step sizes.

The purpose of this paper was to study laminar fluid flow and convective heat transfer in a conical gap at small conicity angles up to 4° for the case of disk rotation with a fixed cone.

In this paper, the improved asymptotic expansion method developed by the author was applied to the self-similar Navier–Stokes equations. The characteristic Reynolds number ranged from 0.001 to 2.0, and the Prandtl numbers ranged from 0.71 to 10.

Compared to previous approaches, the improved asymptotic expansion method has an accuracy like the self-similar solution in a significantly wider range of Reynolds and Prandtl numbers. Including radial thermal conductivity in the energy equation at small conicity angle leads to insignificant deviations of the Nusselt number (maximum 1.23%).

This problem has applications in rheometry to experimentally determine viscosity of liquids, as well as in bioengineering and medicine, where cone-and-disk devices serve as an incubator for nurturing endothelial cells.

The study can help design more effective devices to nurture endothelial cells, which regulate exchanges between the bloodstream and the surrounding tissues.

To the best of the authors’ knowledge, for the first time, novel approximate analytical solutions were obtained for the radial, tangential and axial velocity components, flow swirl angle on the disk, tangential stresses on both surfaces, as well as static pressure, which varies not only with the Reynolds number but also across the gap. These solutions are in excellent agreement with the self-similar solution.

The development of robust control algorithms for the position, velocity and trajectory control of unmanned underwater vehicles (UUVs) depends on the accuracy of their mathematical models. Accuracy of the model is determined by precise estimation of the UUV hydrodynamic parameters. The purpose of this study is to determine the hydrodynamic forces and moments acting on an underwater vehicle with complex body geometry and moving at low speeds and to achieve the accurate coefficients associated with them.

A three-dimensional (3D) computer-aided design (CAD) model of UUV is designed with one-to-one dimensions. 3D fluid flow simulations are conducted using computational fluid dynamics (CFD) software programme in the solution of Navier Stokes equations for laminar and turbulent flow analysis. The coefficients depending on the hydrodynamic forces and moments are determined by the external flow analysis using the CFD programme. The Flow Simulation k-ε turbulence model is used for the transition from laminar flow to turbulent flow. Hydrodynamic properties such as lift and drag coefficients and roll and yaw moment coefficients are calculated. The parameters are compared with the coefficient values found by experimental methods.

Although the modular type UUV has a complex body geometry, the comparative results of the experiments and simulations confirm that the defined model parameters are accurate and close to the actual experimental values. In the proposed k-ε method, the percentage error in the estimation of drag and lifting coefficients is decreased to 4.2% and 8.39%, respectively.

The model coefficients determined in this study can be used in high-level control simulations which leads to the development of robust real-time controllers for complex-shaped modular UUVs.

The Lucky Fin UUV with 4 degrees of freedom is a specific design and its CAD model is first extracted. Verification of simulation results by experiments is generally less referenced in studies. However, it provides more precise parameter identification of the model. Proposed study offers a simple and low-cost experimental measurement method for verification of the hydrodynamic parameters. The extracted model and coefficients are worthwhile references for the analysis of modular type UUVs.

The purpose of this paper is to obtain a constitutive model of cement-based material in the rheological stage, which owns the different water-cement ratio (w/c) and temperature and have a significant impact on the workability of concrete materials.

It is introduced a modified Arrhenius equation into the Herschel–Bulkley model, which is widely applied in rheological analysis and constructed an ordinary differential equation (ODE) of w/c from the Navier–Stokes equation. By solving the ODE, an approximate constitutive relation of cement-based materials included w/c and temperature is derived. Compared with the experimental results, the present model is validated.

The shear stress and shear rate curves with different w/c and temperature are simulated by the present method, and the present model can be applied to analyze the changes of apparent viscosity in cement-based material slurry as the w/c and temperature varying.

This work gives a mathematical model, which can effectively approximate the shear stress–shear rate relation with different w/c and temperature in the rheological stage of cement-based material.

Current methods for flow field reconstruction mainly rely on data-driven algorithms which require an immense amount of experimental or field-measured data. Physics-informed neural network (PINN), which was proposed to encode physical laws into neural networks, is a less data-demanding approach for flow field reconstruction. However, when the fluid physics is complex, it is tricky to obtain accurate solutions under the PINN framework. This study aims to propose a physics-based data-driven approach for time-averaged flow field reconstruction which can overcome the hurdles of the above methods.

A multifidelity strategy leveraging PINN and a nonlinear information fusion (NIF) algorithm is proposed. Plentiful low-fidelity data are generated from the predictions of a PINN which is constructed purely using Reynold-averaged Navier–Stokes equations, while sparse high-fidelity data are obtained by field or experimental measurements. The NIF algorithm is performed to elicit a multifidelity model, which blends the nonlinear cross-correlation information between low- and high-fidelity data.

Two experimental cases are used to verify the capability and efficacy of the proposed strategy through comparison with other widely used strategies. It is revealed that the missing flow information within the whole computational domain can be favorably recovered by the proposed multifidelity strategy with use of sparse measurement/experimental data. The elicited multifidelity model inherits the underlying physics inherent in low-fidelity PINN predictions and rectifies the low-fidelity predictions over the whole computational domain. The proposed strategy is much superior to other contrastive strategies in terms of the accuracy of reconstruction.

In this study, a physics-informed data-driven strategy for time-averaged flow field reconstruction is proposed which extends the applicability of the PINN framework. In addition, embedding physical laws when training the multifidelity model leads to less data demand for model development compared to purely data-driven methods for flow field reconstruction.

This study aims to assess the robustness and accuracy of the face-centred finite volume (FCFV) method for the simulation of compressible laminar flows in different regimes, using numerical benchmarks.

The work presents a detailed comparison with reference solutions published in the literature –when available– and numerical results computed using a commercial cell-centred finite volume software.

The FCFV scheme provides first-order accurate approximations of the viscous stress tensor and the heat flux, insensitively to cell distortion or stretching. The strategy demonstrates its efficiency in inviscid and viscous flows, for a wide range of Mach numbers, also in the incompressible limit. In purely inviscid flows, non-oscillatory approximations are obtained in the presence of shock waves. In the incompressible limit, accurate solutions are computed without pressure correction algorithms. The method shows its superior performance for viscous high Mach number flows, achieving physically admissible solutions without carbuncle effect and predictions of quantities of interest with errors below 5%.

The FCFV method accurately evaluates, for a wide range of compressible laminar flows, quantities of engineering interest, such as drag, lift and heat transfer coefficients, on unstructured meshes featuring distorted and highly stretched cells, with an aspect ratio up to ten thousand. The method is suitable to simulate industrial flows on complex geometries, relaxing the requirements on mesh quality introduced by existing finite volume solvers and alleviating the need for time-consuming manual procedures for mesh generation to be performed by specialised technicians.