Search results

The present work aims in presenting the energy absorbing capability of different combination stacking of multiple materials, namely, Vero White and Tango Plus, under static and dynamic loading conditions.

Honeycomb structures with various multi-material stackings are fabricated using PolyJet 3D printing technique. From the static and dynamic test results, the structure having the better energy absorbing capability is identified.

It is found that from the various stacking combinations of multiple materials, the five-layered (5L) sandwich multi-material honeycomb structure has better energy absorbing capability.

This multi-material combination with a honeycomb structure can be used in the application of crash resistance components such as helmet, knee guard, car bumper, etc.

Through experimental work, various multi-material honeycomb structures and impact resistance of single material clearly indicated the inability to absorb impact loads which experiences a maximum force of 5,055.24 N, whereas the 5L sandwich multi-material honeycomb structure experiences a minimum force of 1,948.17 N, which is 38.5 per cent of the force experienced by the single material. Moreover, in the case of compressive resistance, 2L sandwich multi-material honeycomb structure experiences a maximum force of 5,887.5 N, whereas 5L sandwich multi-material honeycomb structure experiences a minimum force of 2,410 N, which is 40.9 per cent of the force experienced by two-layered (2L) sandwich multi-material honeycomb structure. In this study, the multi-material absorbed most of the input energy and experienced minimum force in both compressive and impact loads, thus showing its energy absorbing capability and hence its utility for structures that experience impact and compressive loads. A maximum force is required to deform the single and 2L material in terms of impact and compressive load, respectively, under maximum stiffness conditions.

The purpose of this paper is to bring up the concept of multi‐material electromagnetic band‐gap structure (EBGs) and develop a method for its fabrication. Meanwhile, its microwave properties were studied and compared with the traditional EBGs consisting of two kinds of material.

Stereolithography (SL) and gel casting were used to fabricate 3D multi‐material EBGs. Resin mold was designed and fabricated based on SL process, slurries loaded with 55vol per cent Al₂O₃ and 55vol per cent TiO₂, respectively, were prepared, and using gel casting, multilayer EBGs with diamond structure were fabricated. T/R method was used to obtain the characteristic parameter S₂₁ of the EBGs; meanwhile, characters of their band structure were studied based on plane wave expansion method.

The fabricated EBGs with a TiO₂‐resin‐air structure showed a band gap from 11.7 GHz to 16.0 GHz along <1, 1, 0> direction; the EBGs with a TiO₂‐resin‐Al₂O₃ structure showed a band gap from 11.4 GHz to 11.9 GHz along <1, 1, 0> direction. Both of them agreed well with the simulation result. Also, through the study of multi‐material EBGs' microwave properties, it could be seen that this structure was a good approach to adjust the band gap.

With the concept of multi‐material EBG structure brought up, multilayer 3D EBGs were designed and fabricated based on SL combined with gel casting. It could be seen that multi‐material EBGs was a good approach to adjust the band gap. Also, the fact that the testing result matched the simulation validates the feasibility of the process.

The purpose of this study is focused on the mechanical properties of multi-materials porous structures manufactured by selective laser melting (SLM).

The Diamond structure was designed by the triply periodic minimal surface function in MATLAB, and multi-materials porous structures were manufactured by SLM. Compression tests were applied to analyze the anisotropy of mechanical properties of multi-materials porous structures.

Compression results show that the multi-materials porous structure has a strong anisotropy behavior. When the compression force direction is parallel to the material arrangement, multi-materials porous structure was compressed in a layer-by-layer way, which is the traditional deformation of the gradient structure. However, when the compression force direction is perpendicular to the material arrangement, the compression curves show a near-periodic saw-tooth waveform characteristic, and this kind of structure was compressed consistently. It is demonstrated that the combination with high strength brittle material and low strength plastic material improves compression mode, and plastic material plays a role in buffering fracture.

This research provides a new method for the design and manufacturing of multi-materials porous structures and an approach to change the compression behavior of the porous structure.

The purpose of this study is to develop a novel approach to designing locally programmed multi-material distribution in a three-dimensional (3D) model, with the goal of producing a biomimetic robot that could mimic the locomotion of living organisms.

A voxelized representation is used to design the multi-material digital model and the material distribution in the model is optimized with the aims of mimicking the deflection dynamics of a real-life biological structure (i.e. inchworms) during its locomotion and achieving smooth deflection between adjacent regions. The design is validated post-fabrication by comparing the bending profiles of the printed robot with the deflection reference images of the real-life organism.

The proposed design framework in this study provides a foundation for multi-material multi-functional design for biomimicry and a wide range of applications in the manufacturing field and many other fields such as robotics and biomedical fields. The final optimized material design was 3D printed using a novel multi-material additive manufacturing method, magnetic field-assisted projection stereolithography. From the experimental tests, it was observed that the deflection curve and the deflection gradient of the printed robot within the adjacent regions of the body agreed well with the profiles taken from the real-life inchworm.

This paper presents a voxelized digital representation of the material distribution in printed parts, allowing spatially varied programming of material properties. The incorporation of reference images from living organisms into the design approach is a novel approach to transform image domain knowledge into the domain of engineering mechanical and material properties. Furthermore, the novel multi-material distribution design approach was validated through designing, 3D printing and prototyping an inchworm-inspired soft robot, which showed superior locomotion capability by mimicking the observed locomotion of the real inchworm.

Most rapid prototyping (RP) relies on energy fields to handle materials, among which electricity has been much more utilized, resulting in distinctive responsiveness of non-linear, overshoot, variable inertia, etc. The purpose of this paper is to eliminate the drawbacks of array nozzle clogging, stringing, melt sagging, particularly in multi-material RP, by focusing on the electrothermal response so as to adaptively distribute thermal more accurate, rapid and balanced.

This paper presents an electrothermal response optimization method of nozzle structure for multi-material RP based on fuzzy adaptive control (FAC). The structural, physical and control model are successively logically built. The fractional order electrothermal model is identified by Riemann Liouville fractional differential equation, using the bisection method to approximate the physical model via least square method to minimize residual sum of squares. The FAC is thereafter implemented by defining fuzzy proportion integration differentiation control rules and fuzzy membership functions for fuzzy inference and defuzzification.

The transient thermodynamic and structural statics, as well as flow field analysis, are conducted. The response time, mean temperature difference and thermal deformation can be found using thermal-solid coupling finite element analysis. In physical experimental research, temperature change, together with material extrusion loading, were measured. Both numerical and physical studies have revealed findings that the electrothermal responsiveness varies with the three-dimensional structure, materials and energy sources, which can be optimized by FAC.

The proposed FAC provides an optimization method for extrusion-based multi-material RP between the balance of thermal response and energy efficiency through fulfilling potential of the hardware configuration. The originality may be widely adopted alongside increasing requirements on high quality and high efficiency RP.

This study aims to provide a comprehensive overview of the current state of the art in powder bed fusion (PBF) techniques for additive manufacturing of multiple materials. It reviews the emerging technologies in PBF multimaterial printing and summarizes the latest simulation approaches for modeling them. The topic of “multimaterial PBF techniques” is still very new, undeveloped, and of interest to academia and industry on many levels.

This is a review paper. The study approach was to carefully search for and investigate notable works and peer-reviewed publications concerning multimaterial three-dimensional printing using PBF techniques. The current methodologies, as well as their advantages and disadvantages, are cross-compared through a systematic review.

The results show that the development of multimaterial PBF techniques is still in its infancy as many fundamental “research” questions have yet to be addressed before production. Experimentation has many limitations and is costly; therefore, modeling and simulation can be very helpful and is, of course, possible; however, it is heavily dependent on the material data and computational power, so it needs further development in future studies.

This work investigates the multimaterial PBF techniques and discusses the novel printing methods with practical examples. Our literature survey revealed that the number of accounts on the predictive modeling of stresses and optimizing laser scan strategies in multimaterial PBF is low with a (very) limited range of applications. To facilitate future developments in this direction, the key information of the simulation efforts and the state-of-the-art computational models of multimaterial PBF are provided.

Understanding the effect of process parameters on interfaces and interfacial bonding between two materials during multi-material additive manufacturing (MMAM) is crucial to the fabrication of high-quality and strong multi-material structures. The purpose of this paper is to conduct an experimental and statistical study to investigate the effect of process parameters of soft and hard materials on the flexural behavior of multi-material structures fabricated via material extrusion-based MMAM.

Sandwich beam samples composed of a soft core and hard shells are fabricated via MMAM under different printing conditions. A design of experiments is conducted to investigate the effect of the print speed and nozzle temperature on the flexural behavior of soft-hard sandwich beams. Analysis of variance and logistic regression analysis are used to analyze the significance of each process parameter. The interfacial morphology of the samples after the flexural tests is characterized. Thermal distributions during the MMAM process are captured to understand the effect of process parameters on the flexural behavior based on inter-bonding formation mechanisms.

Experimental results show that the soft-hard sandwich beams exhibited two different failure modes, including shell failure and interfacial failure. A transition of failure modes from interfacial failure to shell failure is observed as the nozzle temperatures increase. The samples that fail because of interfacial cracking exhibit a pure adhesive failure because of weak interfacial fracture properties. The samples that fail because of shell cracking exhibit a mixed adhesive and cohesive failure. The flexural strength and modulus are affected by the nozzle temperature for the hard material and the print speeds for both hard and soft materials significantly.

This paper first investigates the effect of process parameters for soft and hard materials on the flexural behavior of additively manufactured multi-material structures. Especially, the ranges of the selected process parameters are distinct, and the effect of all possible combinations of the process parameters on the flexural behavior is characterized through a full factorial design of experiments. The experimental results and conclusions of this paper provide guidance for future research on improving the interfacial bonding and understanding the failure mechanism of multi-material structures fabricated by MMAM.

PolyJet technology allows printing complex multi-material composite configurations using Voxel digital designs' capability, thus allowing rapid prototyping of 3D printed structural parts. This paper aims to investigate the processing and mechanical characteristics of composite material configurations formed from soft and hard materials with different distributions and sizes via voxel digital print design.

Voxels are extruded representations of pixels and represent different material information similar to each pixel representing colors in digital images. Each geometric region of a digitally designed part represented by a voxel can be printed with a different material. Multi-material composite part configurations were formed and rapidly prototyped using a PolyJet printer Stratasys J750. A design of experiments composite part configuration of a soft material (Tango Plus) within a hard material matrix (Vero Black) was studied. Composite structures with different hard and soft material distributions, but at the same volume fractions of hard and soft materials, were rapidly prototyped via PolyJet printing through developed Voxel digital printing designs. The tensile behavior of these formed composite material configurations was studied.

Processing and mechanical behavior characteristics depend on materials in different regions and their distributions. Tensile characterization obtained the fracture energy, tensile strength, modulus and failure strength of different hard-soft composite systems. Mechanical properties and behavior of all different composite material systems are compared.

Tensile characteristics correlate to digital voxel designs that play a critical role in additive manufacturing, in addition to the formed material composition and distributions.

Results clearly indicate that multi-material composite systems with various tensile mechanical properties could be created using voxel printing by engineering the design of material distributions, and sizes. The important parameters such as inclusion size and distribution can easily be controlled within all slices via voxel digital designs in PolyJet printing. Therefore, engineers and designers can manipulate entire morphology and material at each voxel level, and different prototype morphologies can be created with the same voxel digital design. In addition, difficulties from AM process with voxel printing for such material designs is addressed, and effective digital solutions were used for successful prototypes. Some of these difficulties are extra support material or printing the part with different dimension than it designed to achieve the final part dimension fidelity. Present work addressed and resolved such issued and provided cyber based software solutions using CAD and voxel discretization. All these increase broad adaptability of PolyJet AM in industry for prototyping and end-use.

The purpose of this paper is to fabricate acrylonitrile-butadiene-styrene (ABS)/high impact polystyrene (HIPS) based multi-material geometries using a low cost polymer printer. At the same time, efforts have been made to investigate the mechanical characteristics of the obtained prints and to perform the optimization using the Taguchi-Grey (TGRA) method.

Initially, the feedstock materials were in-house fabricated in the form of filament wires, workable with fused filament fabrication (FFF) technique, of 1.75 ± 0.1 mm diameter by using a single screw extruder. Multi-material structures were fabricated using variable parameters (such as: raster angles, layer height, fill density and solid layers) and the experimentation was conducted as per Taguchi L18 array. Mechanical responses obtained by performing tensile, impact and bending test were studied in response to input variables and ultimately optimized settings were obtained, for individual as well as multiple parameters). Scanning electron microscopy (SEM) analysis was performed to analyze the fractured surfaces.

The Signal/Noise (S/N) plots for the quality characteristics highlighted that selected input parameters significantly influenced the obtained values for tensile strength, impact strength and flexural strength. Micrographs of the fractured specimens showed the occurrence of brittle fracture with higher levels of perimeter, infill density and solid layers. The extent of delamination was also increased under the bending load and further increased by increasing solid layers.

The results of the study strongly advocated the utility of fabricated multi-materials structures in automotive, aerospace and other manufacturing industries.

This work represents the fabrication, testing and analysis of polymer-based multi-material structures for engineering applications.

Ultrasonic consolidation (UC) is a novel additive manufacturing process developed for fabrication of metallic parts from foils. While the process has been well demonstrated for part fabrication in Al alloy 3003, some of the potential strengths of the process have not been fully explored. One of them is its suitability for fabrication of parts in multi‐materials. This work aims to examine this aspect.

Multi‐material UC experiments were conducted using Al alloy 3003 foils as the bulk part material together with a number of engineering materials (foils of Al‐Cu alloy 2024, Ni‐base alloy Inconel 600^® AISI 347 stainless steel, and others). Deposit microstructures were studied to evaluate bonding between various materials.

It was found that most of the materials investigated can be successfully bonded to alloy Al 3003 and vice versa. SiC fibers and stainless wire meshes were successfully embedded in an Al 3003 matrix. The results suggest that the UC process is quite suitable for fabrication of multi‐material structures, including fiber‐reinforced metal matrix composites.

This work systematically examines the multi‐material capability of the UC process. The findings of this work lay a strong foundation for a wider and more efficient commercial utilization of the process.