Search results

This paper aims to report the study of a fluid buoy system that includes wave effects, with particular emphasis on validating the numerical results with experimental data.

A fluid–solid coupled algorithm is proposed to describe the motion of a rigid buoy under the effects of waves. The Navier–Stokes equations are solved with the open-source finite volume package Code Saturne, in which a free-surface capture technique and equations of motion for the solid are implemented. An ad hoc experiment on a laboratory scale is built. A buoy is placed into a tank partially filled with water; the tank is mounted into a shake table and subjected to controlled motion that promotes waves. The experiment allows for recording the evolution of the free surface at the control points using the ultrasonic sensors and the movement of the buoy by tracking the markers by postprocessing the recorded videos. The numerical results are validated by comparison with the experimental data.

The implemented free-surface technique, developed within the framework of the finite-volume method, is validated. The best-obtained agreement is for small amplitudes compatible with the waves evolving under deep-water conditions. Second, the algorithm proposed to describe rigid-body motion, including wave analysis, is validated. The numerical body motion and wave pattern satisfactorily matched the experimental data. The complete 3D proposed model can realistically describe buoy motions under the effects of stationary waves.

The novel aspects of this study encompass the implementation of a fluid–structure interaction strategy to describe rigid-body motion, including wave effects in a finite-volume context, and the reported free-surface and buoy position measurements from experiments. To the best of the authors’ knowledge, the numerical strategy, the validation of the computed results and the experimental data are all original contributions of this work.

Glass material is largely used for load-bearing components in buildings. For this reason, standardized calculation methods can be used in support of safe structural design in common loading and boundary conditions. Differing from earlier literature efforts, the present study elaborates on the load-bearing capacity, failure time and fire endurance of ordinary glass elements under fire exposure and sustained mechanical loads, with evidence of major trends in terms of loading condition and cross-sectional layout. Traditional verification approaches for glass in cold conditions (i.e. stress peak check) and fire endurance of load-bearing members (i.e. deflection and deflection rate limits) are assessed based on parametric numerical simulations.

The mechanical performance of structural glass elements in fire still represents an open challenge for design and vulnerability assessment. Often, special fire-resisting glass solutions are used for limited practical applications only, and ordinary soda-lime silica glass prevails in design applications for load-bearing members. Moreover, conventional recommendations and testing protocols in use for load-bearing members composed of traditional constructional materials are not already addressed for glass members. This paper elaborates on the fire endurance and failure detection methods for structural glass beams that are subjected to standard ISO time–temperature for fire exposure and in-plane bending mechanical loads. Fire endurance assessment methods are discussed with the support of Finite Element (FE) numerical analyses.

Based on extended parametric FE analyses, multiple loading, geometrical and thermo-mechanical configurations are taken into account for the analysis of simple glass elements under in-plane bending setup and fire exposure. The comparative results show that – in most of cases – thermal effects due to fire exposure have major effects on the actual load-bearing capacity of these members. Moreover, the conventional stress peak verification approach needs specific elaborations, compared to traditional calculations carried out in cold conditions.

The presented numerical results confirm that the fire endurance analysis of ordinary structural glass elements is a rather complex issue, due to combination of multiple aspects and influencing parameters. Besides, FE simulations can provide useful support for a local and global analysis of major degradation and damage phenomena, and thus support the definition of simple and realistic verification procedures for fire exposed glass members.

There is a rising demand for high-performance 3D printed objects that have established potential applications in the sector of dental, automotive, electronics, aerospace, etc. Thus, to meet the requirements of high-performance 3D printed objects, this study has synthesized, formulated and applied a resorcinol epoxy acrylate (REA) oligomer to a stereolithography (SLA) 3D printer.

Different formulations were developed by blending reactive diluents in the concentration of 10%, 15% and 20%, along with the fixed quantity of photo-initiators in the REA oligomer. The structure of synthesized REA oligomer was confirmed using 13 C nuclear magnetic resonance (NMR) and 1H NMR spectroscopy, and the rheological properties for prepared REA formulations were also evaluated. The ultraviolet (UV)-cured specimens of all REA formulations were thoroughly examined based on physical, chemical, optical, mechanical and thermal properties. The best suitable formulation was selected for SLA 3D printing.

As perceived, UV cured REA specimens exhibit superior mechanical, chemical and thermal properties, portraying the ability to use as a high-performance material. The increase in the concentration of reactive diluents indicated a significant improvement in the properties of REA resin. The 20% diluted formulation achieved excellent compatibility with a SLA 3D printer; thus, 3D objects are cast with good dimensional stability and printability.

Resorcinol-based resins have always been a key additive used to enhance properties in the coating and tire industry. In a new attempt UV, curable REA has been applied to a SLA 3D printer to cast high-performance 3D printed objects.

The rise of “strong man” politics in the Philippines brings attention to manhood narratives. Machismo remains a strong presence in the upper echelons of society, despite gender equality initiatives and a strong feminist movement. With Rodrigo Duterte portraying the “father-figure” of the nation, one questions what this type of manhood means for the Filipino family.

This study traces the construction of Filipino manhood in relation to the country’s strongest unit of the family. Utilizing a systematic review of seminal outputs on masculinity, this piece explores the definition of Filipino manhood using texts from various Filipino gender and development scholars. Sikolohiyang Pilipino or Indigenous Filipino Psychology frames the identified themes that surround the image of a Tunay na Lalaki or True Man. The labas (outer world) and loob (inner self) are then framed in relation to Filipino men’s roles. Intersections between one’s peer group, socio-economic class, and the situation in the global migration context inform the formation of one’s labas (outer self/identity). The findings indicate that Filipino manhood traits, as seen in one’s loob (inner self) contextualize one’s understanding of manhood’s construction as familial. By unearthing the nuances of manhood in the archipelago, this chapter showcases masculinities from the subaltern and purports possible ways of decolonizing “from below.”

This purpose of this paper is to report on the development of an evidence-informed framework created to facilitate the formulation of generative artificial intelligence (GenAI) academic integrity policy responses for English medium instruction (EMI) higher education, responding to both the bespoke challenges for the sector and longstanding calls to define and disseminate quality implementation good practice.

A virtual nominal group technique engaged experts (n = 14) in idea generation, refinement and consensus building across asynchronous and synchronous stages. The resulting qualitative and quantitative data were analysed using thematic analysis and descriptive statistics, respectively.

The GenAI Academic Integrity Policy Development Blueprint for EMI Tertiary Education is not a definitive mandate but represents a roadmap of inquiry for reflective deliberation as institutions chart their own courses in this complex terrain.

If repeated with varying expert panellists, findings may vary to a certain extent; thus, further research with a wider range of stakeholders may be necessary for additional validation.

While grounded within the theoretical underpinnings of the field, the tool holds practical utility for stakeholders to develop bespoke policies and critically re-examine existing frameworks.

As texts produced by students using English as an additional language are at risk of being wrongly accused of GenAI-assisted plagiarism, owing to the limited efficacy of text classifiers such as Turnitin, the policy recommendations encapsulated in the blueprint aim to reduce potential bias and unfair treatment of students.

The novel blueprint represents a step towards bridging concerning gaps in policy responses worldwide and aims to spark discussion and further much-needed scholarly exploration to this end.

This paper aims to analyze deeply the effect of surface roughness conditions of the common interface of the two-layered riveted cantilever beams on their frictional damping during free lateral vibration at first mode. Here, the product, (µ × α), and damping ratio, ξ, are the parameters whose variations are analyzed in this investigation. For this, the influencing parameters considered are the natural frequency of vibration, f; the amplitude of initial excitation, y; and surface roughness value, Ra.

For experimentally evaluating logarithmic damping decrement, d, the frequency response function analyzer for the case of free lateral vibrations was used. Later, for evaluating the product, µ × α (where µ is the kinematic coefficient of friction and α is the dynamic slip ratio), and then, the damping ratio, ξ, the empirical relation suggested for logarithmic damping decrement, d, of riveted cantilever beams was used. After this, the full and reduced quadratic models of the product, µ × α, ξ, response surface methodology (RSM) with the help of Design Expert 11 software was used. Corresponding main effects plots, surface plots and prediction comparison plots were obtained to observe the variations of the product, µ × α, ξ for the variations of influencing parameters: f, y and Ra. Finally, a machine learning technique such as artificial neural networks (ANNs) using “nntool” present in MATLAB R13a software was used to predict the ξ for the different combinations of f, y and Ra.

The full and reduced quadratic regression models for the product, (µ × α) and the damping ratio, ξ of riveted cantilever beams for free lateral vibrations of the first mode in terms of the parameters: f, y and Ra were obtained. In addition, the main effects plots, surface plots and prediction comparison plots for the product, µ × α, ξ, with the corresponding experimental values of the product, µ × α, ξ, were obtained. Also, the execution of ANNs using MATLAB R13a software is proved to be the more accurate tool for the prediction of damping ratios in comparison to quadratic regression equations obtained from Design Expert 11 software. In the end, the assumption that the effect of surface roughness value on the product, (µ × α), and the damping ratio, ξ, is negligible is proved to be true using the main effects plots for the product, (µ × α) and ξ obtained from the Design Expert 11 software.

Obtaining the full and reduced quadratic regression equations for the product, (µ × α), and ξ of the two-layered riveted cantilever beams in terms of parameters: f, y and Ra was done. In addition, the conditions for the corresponding minimum and maximum values of the product, (µ × α), and ξ were obtained. Later, the main effects plots, surface plots and comparison plots of the predicted product, (µ × α), and ξ versus experimental product, (µ × α), and ξ were also obtained. Finally, the predicted values of the product, (µ × α), and ξ using the ANNs tool are observed to be the more accurate values in comparison to that obtained from RSM using the Design Expert 11 software.

This chapter seeks to elucidate specific behavioral patterns that occur when people travel and consume luxury items using concepts drawn from sociocultural and economic theories. These concepts are Walter Benjamin's “aura,” Karl Marx's “commodity fetishism,” and Arnold Van Gennep's “liminality.” These concepts are deployed within the spheres of tourism and luxury in order to analyze how tourists on a shopping spree search for forms of authenticity, how this type of travel is similar in many respects to a religious quest, and, finally, how the design of luxury outlets in European capitals convey religious overtones.

This research aims to examine the introduction of participatory budgeting (PB) in local governments in two Francophone countries, namely, Benin and Niger, and how local contextual factors influence its practices.

The research employs a multiple case study design with a comparative approach to analyze the introduction and practices of participatory budgeting across selected municipalities in Benin and Niger. Hopper (2017) and Lassou et al.’s (2018) notion of “pragmatism” within neopatrimonialism is mobilized to analyze the data from sources including interviews and documents. The analysis is conducted at both the country and local government levels.

Participatory budgeting took roots in a number of municipalities. Its introduction and adoption has promoted participatory governance especially from traditionally marginalized segments of society (e.g. women); albeit to varying degrees, in the face of the prevailing national neopatrimonial context. Furthermore, despite donor's push for a standardized model of PB implementation, actual practices took varying shapes, a consequence of differing local conditions and circumstances.

In terms of limitation, it was not possible to access a number of research participants sought, particularly in Niger. But access to key documents from government, donors and civil society organizations help mitigate this to a large extent.

A major practical implication is the importance of adaptation to local socio-economic contexts and circumstances. As shown in the study, a blanket introduction and implementation of PB across societies based on a standardized model is unlikely to succeed and be sustained in the long run. A great deal of flexibility is required to accommodate indigenous realities on the grounds.

The study contributes to shed light on public sector budgeting regarding participatory budgeting practices in an under-researched setting: Francophone Africa.

In this chapter, the discussion revolves around the necessity for responsible management within the context of a complex environment. The 21st century has brought forth numerous challenges for businesses and organizations globally. The rise of VUCA has made it increasingly difficult for companies to achieve success using traditional management approaches. Addressing adaptive challenges and wicked problems, which are sustainability issues that are hard to define and even harder to solve, has become a significant concern for today's enterprises. To tackle these challenges, a shift in management and leadership paradigms is needed, particularly a shift from ego-centric to eco-centric management styles and from boss-centric to self-management approaches. Embracing a more responsible and sustainable management strategy is essential for addressing adaptive challenges. This could involve integrating Taoist principles like compassion, conservation and compliance into management practices and collaborating with stakeholders to devise innovative solutions to tackle adaptive challenges and wicked problems.