Search results

The purpose of this paper is to review cases of artificial reefs built through additive manufacturing (AM) technologies and analyse their ecological goals, fabrication process, materials, structural design features and implementation location to determine predominant parameters, environmental impacts, advantages, and limitations.

The review analysed 16 cases of artificial reefs from both temperate and tropical regions. These were categorised based on the AM process used, the mortar material used (crucial for biological applications), the structural design features and the location of implementation. These parameters are assessed to determine how effectively the designs meet the stipulated ecological goals, how AM technologies demonstrate their potential in comparison to conventional methods and the preference locations of these implementations.

The overview revealed that the dominant artificial reef implementation occurs in the Mediterranean and Atlantic Seas, both accounting for 24%. The remaining cases were in the Australian Sea (20%), the South Asia Sea (12%), the Persian Gulf and the Pacific Ocean, both with 8%, and the Indian Sea with 4% of all the cases studied. It was concluded that fused filament fabrication, binder jetting and material extrusion represent the main AM processes used to build artificial reefs. Cementitious materials, ceramics, polymers and geopolymer formulations were used, incorporating aggregates from mineral residues, biological wastes and pozzolan materials, to reduce environmental impacts, promote the circular economy and be more beneficial for marine ecosystems. The evaluation ranking assessed how well their design and materials align with their ecological goals, demonstrating that five cases were ranked with high effectiveness, ten projects with moderate effectiveness and one case with low effectiveness.

AM represents an innovative method for marine restoration and management. It offers a rapid prototyping technique for design validation and enables the creation of highly complex shapes for habitat diversification while incorporating a diverse range of materials to benefit environmental and marine species’ habitats.

Polyurethane (PUR) foam parts are traditionally manufactured using metallic molds, an unsuitable approach for prototyping purposes. Thus, rapid tooling of disposable molds using fused filament fabrication (FFF) with polylactic acid (PLA) and glycol-modified polyethylene terephthalate (PETG) is proposed as an economical, simpler and faster solution compared to traditional metallic molds or three-dimensional (3D) printing with other difficult-to-print thermoplastics, which are prone to shrinkage and delamination (acrylonitrile butadiene styrene, polypropilene-PP) or high-cost due to both material and printing equipment expenses (PEEK, polyamides or polycarbonate-PC). The purpose of this study has been to evaluate the ease of release of PUR foam on these materials in combination with release agents to facilitate the mulding/demoulding process.

PETG, PLA and hardenable polylactic acid (PLA 3D870) have been evaluated as mold materials in combination with aqueous and solvent-based release agents within a full design of experiments by three consecutive molding/demolding cycles.

PLA 3D870 has shown the best demoldability. A mold expressly designed to manufacture a foam cushion has been printed and the prototyping has been successfully achieved. The demolding of the part has been easier using a solvent-based release agent, meanwhile the quality has been better when using a water-based one.

The combination of PLA 3D870 and FFF, along with solvent-free water-based release agents, presents a compelling low-cost and eco-friendly alternative to traditional metallic molds and other 3D printing thermoplastics. This innovative approach serves as a viable option for rapid tooling in PUR foam molding.

The purpose of this study is to describe latent classes explaining the innovation logic in the Finnish construction companies. Innovativeness is a driver of competitive performance and vital to the long-term success of any organisation and company.

Using finite mixture structural equation modelling (FMSEM), the authors have classified innovation logic into latent classes. The method analyses and recognises classes for companies that have similar logic in innovation activities based on the collected data.

Through FMSEM analysis, the authors have identified three latent classes that explain the innovation logic in the Finnish construction companies – LC1: the internal innovators; LC2: the non-innovation-oriented introverts; and LC3: the innovation-oriented extroverts. These three latent classes clearly capture the perceptions within the industry as well as the different characteristics and variables.

The presented latent classes explain innovation logic but is limited to analysing Finnish companies. Also, the research is quantitative by nature and does not increase the understanding in the same manner as qualitative research might capture on more specific aspects.

This paper presents starting points for construction industry companies to intensify innovation activities. It may also indicate more fundamental changes for the structure of construction industry organisations, especially by enabling innovation friendly culture.

This study describes innovation logic in Finnish construction companies through three models (LC1–LC3) by using quantitative data analysed with the FMSEM method. The fundamental innovation challenges in the Finnish construction companies are clarified via the identified latent classes.

Interior workspace environments use exclusively artificial light, resulting in a loss of biological connection and natural light quality, as well as greater energy consumption. The purpose of the study is to identify a suitable system that can provide natural light to such interior spaces throughout the day while supplementing it with artificial light when necessary. The fundamental aim is to provide insights into the most effective solutions for energy-efficient lighting design in the UAE's environment, with the potential to lower energy consumption related to interior lighting.

The study adopted an empirical approach to gather and analyze primary data based on field measurements to understand and assess existing lighting conditions, as well as DIALux lighting simulation software to test the efficacy of the proposed HLS in terms of natural light delivery, illumination quality and energy consumption. A branch of a local bank in the United Arab Emirates, situated inside one of the shopping malls where there is no natural light penetration, has been chosen as a case study.

The findings of comparing the base case to four probable scenarios that used HLS revealed that the third scenario, which uses 100% pure sunshine and 35% artificial LED light during daylight operations and 100% LED light during night duty, is considered to be optimal in terms of illumination quality and energy efficiency.

The study demonstrated the potential of innovative lighting to improve the visual working environment in interior spaces with limited access to direct natural lighting, especially in arid regions, where sunlight is plentiful throughout the year. The study contributes new insights into the establishment of lighting-related recommendations and standards for the UAE context. This may include advice for sustainable construction practices, lighting guidelines or incentives to encourage the use of hybrid lighting technology in commercial and institutional buildings.

To elaborate the nature of fact-checking in the domain of political information by examining how fact-checkers assess the validity of claims concerning the Russo-Ukrainian conflict and how they support their assessments by drawing on evidence acquired from diverse sources of information.

Descriptive quantitative and qualitative content analysis of 128 reports written by the fact-checkers of Snopes – an established fact-checking organisation – during the period of 24 February 2022 – 28 June, 2023. For the analysis, nine evaluation grounds were identified, most of them inductively from the empirical material. It was examined how the fact-checkers employed such grounds while assessing the validity of claims and how the assessments were bolstered by evidence acquired from information sources such as newspapers.

Of the 128 reports, the share of assessments indicative of the invalidity of the claims was 54.7%, while the share of positive ratings was 26.7%. The share of mixed assessments was 15.6%. In the fact-checking, two evaluation grounds, that is, the correctness of information and verifiability of an event presented in a claim formed the basis for the assessment. Depending on the topic of the claim, grounds such as temporal and spatial compatibility, as well as comparison by similarity and difference occupied a central role. Most popular sources of information offering evidence for the assessments include statements of government representatives, videos and photographs shared in social media, newspapers and television programmes.

As the study concentrated on fact-checking dealing with political information about a specific issue, the findings cannot be extended to concern the fact-checking practices in other contexts.

The study is among the first to characterise how fact-checkers employ evaluation grounds of diverse kind while assessing the validity of political information.

This paper presents a new and well-structured framework that aims to assess the current environmental impact from a Greenhouse Gas (GHG) emissions perspective. This tool includes a new set of Lean Key Performance Indicators (KPIs), which translates the well-known logic of Overall Equipment Effectiveness in the field of GHG emissions, that can progressively detect industrial losses that cause GHG emissions and support decision-making for implementing improvements.

The new metrics are presented with reference to two different perspectives: (1) to highlight the deviation of the current value of emissions from the target; (2) to adopt a diagnostic orientation not only to provide an assessment of current performance but also to search for the main causes of inefficiencies and to direct improvement implementations.

The proposed framework was applied to a major company operating in the plywood production sector. It identified emission-related losses at each stage of the production process, providing an overall performance evaluation of 53.1%. The industrial application shows how the indicators work in practice, and the framework as a whole, to assess GHG emissions related to industrial losses and to proper address improvement actions.

This paper scrutinizes a new set of Lean KPIs to assess the industrial losses causing GHG emissions and identifies some significant drawbacks. Then it proposes a new structure of losses and KPIs that not only quantify efficiency but also allow to identify viable countermeasures.

This study aims to improve a construction company's overall project delivery by utilising lean six sigma (LSS) methods combined with building information modelling (BIM) to design, modularise and manufacture various building elements in a controlled factory environment off-site.

A case study in a construction company utilised lean six sigma (LSS) methodology and BIM to identify non-value add waste in the construction process and improve sustainability.

An Irish-based construction company manufacturing modular pipe racks for the pharmaceutical industry utilised LSS to optimise and standardise their off-site manufacturing (OSM) partners process and leverage BIM to design skids which could be manufactured offsite and transported easily with minimal on-site installation and rework required. Productivity was improved, waste was reduced, less energy was consumed, defects were reduced and the project schedule for completion was reduced.

The case study was carried out on one construction company and one construction product type. Further case studies would ensure more generalisability. However, the implementation was tested on a modular construction company, and the methods used indicate that the generic framework could be applied and customized to any offsite company.

This is one of the few studies on implementing offsite manufacturing (OSM) utilising LSS and BIM in an Irish construction company. The detailed quantitative benefits and cost savings calculations presented as well as the use of the LSM methods and BIM in designing an OSM process can be leveraged by other construction organisations to understand the benefits of OSM. This study can help demonstrate how LSS and BIM can aid the construction industry to be more environmentally friendly.

This paper argues for the need to use multiple sources and methods that respond to research challenges presented by new forms of war. There are methodological constraints and contention on the superiority given to positivist and interpretivist research designs when doing fieldwork in war situations, hence there is a need to use integrated data generation techniques. The combined effect of severe limitations of movement for both the researcher and researched fragmented data because of polarized views about the causes of the war and unpredictable events that make information hard to come by militate against systematic, organised and robust data generation. The purpose of this paper, therefore, is to make fieldwork researchers understand significant research problems unique to war zones.

This research was guided by the postmodernist mode of thought which challenges standardised research traditions. Fieldwork experiences in Cabo suggest the need to use the composite strategies that rely on the theoretical foundation of integrative and creative collection of data when doing research in violent settings.

The fieldwork experiences showed that the standardised, conventional and valorised positivist and ethnographic research strategies may not sufficiently facilitate understanding of the dynamics of war. There should not be firm rules, guidelines or regulations governing the actions of the researcher in conflict. As such, doing research in violent settings require reflexivity, flexibility and creativity in research strategies that respond to rapid changes. Research experiences in Mozambique show the need to use blended methods that include even less structured methodologies.

Fieldwork experiences in Cabo challenges researchers who cling to standardised research traditions which often hamper awareness of new postmodernist mode of thought applicable to war settings. It is essential to study the nature of African armed conflicts by combining creativity and flexibility in the selection of research strategies.

This study aims to explore how sustainable business models (SBM) can be developed within agri-innovation systems (AIS) and emphasize an integration of the two with a systemic understanding for reducing food loss and value loss in postharvest agri-food supply chain.

This study conducted longitudinal qualitative research in a developing country with food loss challenges in the postharvest supply chain. This study collected data through multiple rounds of fieldwork, interviews and focus groups over four years. Thematic analysis and “sensemaking” were used for inductive data analysis to generate rich contextual knowledge by drawing upon the lived realities of the agri-food supply chain actors.

First, this study finds that the value losses are varied in the supply chain, encompassing production value, intrinsic value, extrinsic value, market value, institutional value and future food value. This happens through two cumulative effects including multiplier losses, where losses in one model cascade into others, amplifying their impact and stacking losses, where the absence of data stacks or infrastructure pools hampers the realisation of food value. Thereafter, this study proposes four strategies for moving from the loss-incurring current business model to a networked SBM for mitigating losses. This emphasises the need to redefine ownership as stewardship, enable formal and informal beneficiary identification, strengthen value addition and build capacities for empowering communities to benefit from networked SBM with AIS initiatives. Finally, this study puts forth ten propositions for future research in aligning AIS with networked SBM.

This study contributes to understanding the interplay between AIS and SBM; emphasising the integration of the two to effectively address food loss challenges in the early stages of agri-food supply chains. The identified strategies and research propositions provide implications for researchers and practitioners seeking to accelerate sustainable practices for reducing food loss and waste in agri-food supply chains.

This study focuses on HR practices that foster employee engagement during Covid-19. Companies in transition economies are particularly vulnerable to crisis and downsizing and other recessionary practices are frequently used.

Drawing on the model of caring human resource management, we utilise interviews with human resource representatives of 10 banks in the transition economy of Bosnia and Herzegovina. We analyse the banks at two different times to demonstrate how and why companies adapt their HR practices.

Our findings show a changing mindset in the deployment of highly context-specific HR practices. Strengthening company culture through a sense of community and communication ensure stability and continuity in work. Rather than layoffs, flexible work has become standard.

By highlighting the interplay between HR practices and employee engagement, we contribute to the discussion on engagement in exceptional circumstances and challenging settings and demonstrate how caring responsibilities “migrate” into HR practices in the professional context of a transition economy.

We propose a context-specific “protective caring approach” to foster employee engagement during crises.