Search results

This paper aims to provide an overview of applications of medical rapid prototyping (MRP)-assisted customized surgical guides (CSGs) and shows the potential of this technology in complex surgeries. This review paper also reports two case studies from open literature where MRP-assisted CSGs have been successfully used in complex surgeries.

Key publications from the past two decades have been reviewed.

This study concludes that the use of MRP-assisted CSGs improves the accuracy of surgery. Additionally, MRP-assisted CSGs make the surgery much faster, accurate and cheaper than any other technique. The outcome based on literature review and two case studies strongly suggested that MRP-assisted CSGs might become part of a standard protocol in the medical sector to operate the various complex surgeries, in the near future.

Advanced technologies like radiology, image processing, virtual surgical planning (VSP), computer-aided design (CAD) and MRP made it possible to fabricate the CSGs. MRP-assisted CSGs can easily transfer the VSP into the actual surgery.

This paper is beneficial to study the development and applications of MRP-assisted CSGs in complex surgeries.

Combination of advanced imaging, designing and manufacturing techniques has been rapidly developed in recent years for diagnostic and therapeutic purposes for medical devices. The purpose of this paper is to present a methodology for design and fabrication procedure of medical models using computer‐aided design (CAD) and fused deposition modeling (FDM) technique for application in the mandibular reconstructive surgery.

Case studies of patients with mandibular defects are examined using CAD model construction including data acquisition from computerized tomography scan and data processing. Furthermore, the effect of advanced manufacturing parameters settings in FDM methodology is investigated.

The models were used in assisting the surgeons in their reconstruction planning. A significant improvement regarding the success and convenience in surgery planning been reported.

This paper explores the application and viability of FDM rapid prototyping technology for fabrication of complex mandibular models used for reconstructive surgery.

The goal of rapid mechanical prototyping is to be able to quickly fabricate complex‐shaped, 3D parts directly from computer‐aided design models. The key idea of this novel technology is based upon decomposition of 3D computer models data into thin cross‐sectional layers, followed by physically forming the layers and stacking them up; “layer by layer technique.” This new method of modeling has raised many attentions in dentistry especially in the field of surgery and implantology. The purpose of this review study is to represent the historical development and various methods currently used for building dental appliances. It is also aimed to show the many benefits which can be achieved by using this new technology in various branches of dentistry.

The major existing resources, including unpublished data on the internet, were considered.

Although, creating 3D objects in a layered fashion is an idea almost as old as human civilization but, this technology has only recently been employed to build 3D complex models in dentistry. It seems that in near future many other methods will develop which could change traditional dental practices. It is advisable to include more unit hours in dental curriculums to acquaint dental students with the many benefits of this novel technology.

It is hard to believe that the routine dental techniques were affected by revolutionary concepts originally theorized by engineering methods. It is a reality that in future, most of the restorative disciplines will be fully revised and the computer methods be evolved to an extent where dentistry can be performed by computer‐assisted methods with optimum safety, simplicity, and reliability.

Fused deposition modeling (FDM) is a layer by layer technology with the potential to create complex and individual parts from thermoplastic materials such as ABS. The use of Polylactic acid (PLA) and tricalcium phosphate (TCP) as resorbable composite is state of the art in tissue engineering and maxillofacial surgery. The purpose of this paper is to evaluate the processing conditions and the performance of parts (e.g. mechanical properties) manufactured with a FDM machine.

In this paper, the general suitability of PLA for the processing with FDM is evaluated and material specific effects (e.g. crystallization and shrinkage) are shown. Therefore, the characterization of the semi‐crystalline biodegradable material by thermal, mechanical and microscopic analysis is carried out.

Facts, which affect the functional properties of the samples, are analyzed. Among them, the processing temperature and sample size significantly affect the morphology of the final components. Components from PLA/TCP with sufficient mechanical properties for their potential use as scaffolds are obtained.

Thus, the paper shows that by thermal analysis it is possible to identify major influences on processing and part properties.

The paper provides an overview of research published in the innovation and operations management (IOM) literature on 15 methods for cost management in new product development, and it provides a comparison to an earlier review of the management accounting (MA) literature (Wouters & Morales, 2014).

This structured literature search covers papers published in 23 journals in IOM in the period 1990–2014.

The search yielded a sample of 208 unique papers with 275 results (one paper could refer to multiple cost management methods). The top 3 methods are modular design, component commonality, and product platforms, with 115 results (42%) together. In the MA literature, these three methods accounted for 29%, but target costing was the most researched cost management method by far (26%). Simulation is the most frequently used research method in the IOM literature, whereas this was averagely used in the MA literature; qualitative studies were the most frequently used research method in the MA literature, whereas this was averagely used in the IOM literature. We found a lot of papers presenting practical approaches or decision models as a further development of a particular cost management method, which is a clear difference from the MA literature.

This review focused on the same cost management methods, and future research could also consider other cost management methods which are likely to be more important in the IOM literature compared to the MA literature. Future research could also investigate innovative cost management practices in more detail through longitudinal case studies.

This review of research on methods for cost management published outside the MA literature provides an overview for MA researchers. It highlights key differences between both literatures in their research of the same cost management methods.

Editorial This special issue of Industrial Management & Data Systems is a huge departure from our usual journal/ monograph style. This is an additional issue to the year's volume — a bonus in fact.

This study proposes targeted modernization of the Department of Defense (DoD's) Joint Forces Ammunition Logistics information system by implementing the optimized innovative information technology open architecture design and integrating Radio Frequency Identification Device data technologies and real-time optimization and control mechanisms as the critical technology components of the solution. The innovative information technology, which pursues the focused logistics, will be deployed in 36 months at the estimated cost of $568 million in constant dollars. We estimate that the Systems, Applications, Products (SAP)-based enterprise integration solution that the Army currently pursues will cost another $1.5 billion through the year 2014; however, it is unlikely to deliver the intended technical capabilities.

The purpose of this paper is twofold: first, a case study on applying lean principles in manufacturing operations to redesign and optimize an electronic device assembly process and its impact on performance and second, introducing cardboard prototyping as a Kaizen tool offering a novel approach to testing and simulating improvement scenarios.

The study employs value stream mapping, root cause analysis, and brainstorming tools to identify root causes of poor performance, followed by deploying a Kaizen event to redesign and optimize an electronic device assembly process. Using physical models, bottlenecks and opportunities for improvement were identified by the Kaizen approach at the workstations and assembly lines, enabling the testing of various scenarios and ideas. Changes in lead times, throughput, work in process inventory and assembly performance were analyzed and documented.

Pre- and post-improvement measures are provided to demonstrate the impact of the Kaizen event on the performance of the assembly cell. The study reveals that implementing lean tools and techniques reduced costs and increased throughput by reducing assembly cycle times, manufacturing lead time, space utilization, labor overtime and work-in-process inventory requirements.

This paper adds a new dimension to applying the Kaizen methodology in manufacturing processes by introducing cardboard prototyping, which offers a novel way of testing and simulating different scenarios for improvement. The paper describes the process implementation in detail, including the techniques and data utilized to improve the process.

This special “Anbar Abstracts” issue of Industrial Management & Data Systems is split into six sections covering abstracts under the following headings: Industrial Management; Industrial Engineering and Work Study; Industrial Design; Quality Management; Manufacturing Strategy and Production; Information Systems.

Looks at strategic logistics management and technology strategies for manufacturing and groups the contents under four main headings: logistical future; information challenge; 21st century manufacturing; 21st century service industries. Aims to look at the many challenges facing logistics practitioners and researchers.