Search results

This paper's aim is to examine the application feasibility of Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) technologies for achieving agility in a typical manufacturing organization.

A literature study was conducted. It was found out that CAD/CAM technology is not fully utilised for achieving agility in certain traditional manufacturing sectors. An implementation study was conducted in an electronics switches manufacturing company to identify the causes of this insufficient utilisation. Finally, a feedback session was conducted to explore the practitioners' views of this research.

The outcome of this research indicated the feasibility of adopting CAD/CAM as a technology for infusing agility in contemporary manufacturing organisations.

This research was conducted in only one electronics switches manufacturing company situated in India. This may lead to the impression that the findings from this research may not represent all manufacturing companies. However, the environment prevailing in the above company is similar to that prevailing in any other contemporary manufacturing organizations. Hence, the outcome of the research could represent other manufacturing organisations situated throughout the world.

The research reported in this paper has shown the way of adopting CAD/CAM as a technology for achieving agility and examined the hindrances that have to be overcome in future to integrate CAD/CAM in practical scenario.

Significant researches have been pursued in agile manufacturing and CAD/CAM fields. However, no researcher has attempted to examine the practicality of adopting CAD/CAM as a technology for infusing agility in practical scenario. Hence, this work is original and valuable.

The purpose of this paper is to report a research which is carried out to examine the possibility of applying finite element analysis (FEA) and computer‐aided design/computer‐aided manufacturing (CAD/CAM) concepts in a typical organisational environment to acquire the characteristics of agile manufacturing (AM).

One of the components of a model of electronic switch manufactured by a company was chosen as the candidate of this research. Five new models of this component incorporated with agile characteristics were developed in electronic environment using Moldflow Plastics Insight software.

The experiences of conducting this research being reported in this paper indicate the possibility of adopting FEA‐integrated CAD/CAM concept for achieving agility. However, certain hindrances have to be overcome to pursue deeper journey by the contemporary organisations in this direction.

This research is conducted on one component of a product manufactured by a company. The typical scenario prevailing in the company is similar that is seen in many companies situated in other parts of the worlds. Hence, the contributions of this research, particularly the roadmap would be useful for adopting FEA and CAD/CAM concepts to achieve agility in contemporary organisations.

The research reported in this paper has shown the way of focusing FEA‐integrated CAD/CAM utilities towards enhancing AM capabilities of contemporary organisations.

The literature survey conducted in the beginning of this research indicated that deeper research in the direction of applying FEA‐integrated CAD/CAM concept for acquiring agile characteristics is yet to start. Hence, the research reported in this paper is original and valuable.

Agile manufacturing (AM) refers to the capability of an organisation to quickly respond to the customers' dynamic demands. The purpose of this paper is to report a research which is carried out to explore the interfacing of computer aided design/computer aided manufacturing (CAD/CAM) in a traditional manufacturing company with the purpose of acquiring AM characteristics.

The CAD model of an existing electronics switch is developed using Pro/E package. Then, the mold adviser package is used to design the existing mold of this component. On studying this mold, ten new models of it are designed using the mold adviser package.

The new models developed through CAD/CAM interfacing are found to possess more agile characteristics than those possess by the existing mold.

The explorative study is conducted in only one traditional manufacturing company. In this company several world class manufacturing strategies like kaizen and total productive maintenance are implemented. This endeavour mimics those pursue in majority of the companies situated in different parts of the world. This implies that the contributions of this research would be useful to majority of those companies as well.

A roadmap is developed which will be useful for practically applying CAD/CAM interfacing with the objective of implementing AM.

It appears that no researcher has examined the interfacing of CAD/CAM for achieving agility in manufacturing organisations. This paper reports a research, which is conducted to fill this research and practice gap. Hence, this research is original and valuable to both researchers and practitioners.

Different technologies may currently be used to produce dental prostheses, such as additive manufacturing and traditional milling. This study aims to evaluate and improve the fabrication process for hot-pressed porcelain dental prostheses and compare the use of masked stereolithography apparatus (MSLA) casting to computer-aided design/computer-aided manufacturing (CAD/CAM) casting. The cost-benefit analysis of producing dental prostheses through various technologies, including additive manufacturing and traditional milling, has not been fully explored. The cost of materials and processes used to produce prostheses varies based on complexity of design and materials used, and long-term effects, such as durability and wear and tear, must be taken into account.

Using key elements of part costs and estimation cost models, a multivariable approach was used to evaluate the practicality of the recommended strategy and process improvement.

The research found that MSLA casting provides a higher return on investment than CAD/CAM casting, and the optimized production process could be more suitable for the size and annual demand for prostheses.

Overall, this study highlights the need for a more comprehensive understanding of the cost-benefit analysis of different dental prosthesis production methods and emphasises the importance of evaluating long-term effects on the cost-benefit analysis.

The purpose of this paper is to study the effect of the height and diameter of the dies as well as work‐piece dimensions, on stresses and strains on dies in the forging process. This helps in developing a better understanding of the effect of process parameters. As a result, the manufacturing task could be accomplished with minimal number of trials.

After determining the most influencing parameters on the forging process, the mechanical part is drawn, size of initial billet and shape of punch and die are also determined to build a finite‐element model to represent the process. Several outputs are taken as an indication for die wear and process performance. Finally, a computer numerical control (CNC) code to manufacture the selected die is generated.

It was found that when the die diameter increases, the effective stress decreases. On other hand, it was found that the work required to finish the forging process is highly affected by the dimensions of work‐piece. Therefore, it is possible to save power if work‐piece dimensions are adjusted.

This paper was meant to be a universal step or guide in developing a computer aided design/computer aided manufacturing (CAD/CAM) system to design, simulate, and manufacture molds for the forging process using a statistical method.

Computervision Europe has announced DESIGNER V, its latest offering in its range of Computer Aided Design/Computer Aided Manufacture (CAD/CAM) systems.

Current advances in information technology and, in particular, computer‐aided design/computer‐aided manufacturing (CAD/CAM) and enterprise resources planning (ERP) systems, have led organisations to undertake significant investments in these systems. Next generation manufacturers require both systems to maintain or gain a competitive advantage, reduce risks and improve productivity and viability. In addition, recent attention to the implementation of CAD/CAM systems highlights their important role in automating complex design and next generation manufacturing processes. In the next millennium more manufacturers are likely to implement CAD/CAM and ERP systems and hence issues in the integration of CAD/CAM with ERP systems must become a major concern. Accordingly, this paper will: explore the problems of integration of CAD/CAM systems with ERP systems; study how the severity of these problems relates to CAD/CAM integration success; propose a set of critical success factors (CSF) for the integration of CAD/CAM with ERP systems; suggest hypotheses to study the relevance of these CSF for successful integration of CAD/CAM with ERP systems. In addition, the paper also demonstrates the importance of successful integration of CAD/CAM systems with other applications for next generation manufacturers. These findings suggest that integration of CAD/CAM systems with ERP systems is complex, involving many factors.

This paper aims to provide an overview of applications of medical rapid prototyping (MRP)-assisted customized surgical guides (CSGs) and shows the potential of this technology in complex surgeries. This review paper also reports two case studies from open literature where MRP-assisted CSGs have been successfully used in complex surgeries.

Key publications from the past two decades have been reviewed.

This study concludes that the use of MRP-assisted CSGs improves the accuracy of surgery. Additionally, MRP-assisted CSGs make the surgery much faster, accurate and cheaper than any other technique. The outcome based on literature review and two case studies strongly suggested that MRP-assisted CSGs might become part of a standard protocol in the medical sector to operate the various complex surgeries, in the near future.

Advanced technologies like radiology, image processing, virtual surgical planning (VSP), computer-aided design (CAD) and MRP made it possible to fabricate the CSGs. MRP-assisted CSGs can easily transfer the VSP into the actual surgery.

This paper is beneficial to study the development and applications of MRP-assisted CSGs in complex surgeries.

Reports on the computer‐aided design (CAD) upgrade implementation process at PBR Automotive Pty Ltd, Melbourne, Australia. Views the implementation as successful since many of the desired outcomes have been achieved or surpassed. The key success factors were detailed planning, user involvement and vendor support. These combined to create an atmosphere of excitement in the project and success. Reports on the future plans that include the development of an integrated information system at PBR which will involve customers and suppliers in addition to internal personnel. The CAD system upgrade serves as a launching board for the development of such a system.

Describes the development of an integrated computerized engineering database and CAD/CAM system at Presto Tools Ltd, Sheffield, UK. Following an examination of the existing computer hardware and software systems the factors inhibiting the development of an integrated environment were identified. Using a suite of computer programs and application packages including Smartware II, Anvil‐5000 (CAD) and Pathtrace (CAM), an integrated system was developed with the objective of creating a more responsive and interactive manufacturing environment. Describes the original facilities, and the development of the new system.