Search results

The six-axis force/torque sensor based on a Y-type structure has the advantages of simple structure, small space volume, low cost and wide application prospects. To meet the overall structural stiffness requirements and sensor performance requirements in robot engineering applications, this paper aims to propose a Y-type six-axis force/torque sensor.

The performance indicators such as each component sensitivities and stiffnesses of the sensor were selected as optimization objectives. The multiobjective optimization equations were established. A multiple quadratic response surface in ANSYS Workbench was modeled by using the central composite design experimental method. The optimal manufacturing structural parameters were obtained by using multiobjective genetic algorithm.

The sensor was optimized and the simulation results show that the overload resistance of the sensor is 200%F.S., and the axial stiffness, radial stiffness, bending stiffness and torsional stiffness are 14.981 kN/mm, 16.855 kN/mm, 2.0939 kN m/rad and 6.4432 kN m/rad, respectively, which meet the design requirements, and the sensitivities of each component of the optimized sensor have been well increased to be 2.969, 2.762, 4.010, 2.762, 2.653 and 2.760 times as those of the sensor with initial structural parameters. The sensor prototype with optimized parameters was produced. According to the calibration experiment of the sensor, the maximum Class I and II errors and measurement uncertainty of each force/torque component of the sensor are 1.835%F.S., 1.018%F.S. and 1.606%F.S., respectively. All of them are below the required 2%F.S.

Hence, the conclusion can be drawn that the sensor has excellent comprehensive performance and meets the expected practical engineering requirements.

The purpose of this paper is to achieve optimal climbing control of the gas-insulated switchgear (GIS) robot, as the authors know that the GIS inspection robot is a kind of artificial intelligent mobile equipment which auxiliary or even substitute human labor drive on the inner wall of the gas-insulated metal enclosed switchgear. The GIS equipment fault inspection and maintenance can be realized through the robot manipulator on the mobile platform and the camera carried on the fuselage, and it is a kind of intelligent equipment for operation. To realize the inspection and operation of the GIS equipment pipeline without blind spots, the robot is required to be able to travel on any wall inside the pipeline, especially the top of the pipeline and both right and left sides of the pipeline, which requires the flexible climbing of the GIS inspection robot. The robot device has a certain adsorption function to ensure that the robot is fully attached to the wall surface. At the same time, the robot manipulator can be used for collision-free obstacle avoidance operation planning in the narrow operation space inside the GIS equipment.

The above two technologies are the key that the robot completes the GIS equipment inspections. Based on this, this paper focuses on modeling and analysis of the chassis adsorption characteristics for the GIS inspection robot. At the same time, the Denavit Hartenberg (D-H) coordinate model of the robot arm system has been established, and the kinematics forward and inverse solutions of the robot manipulator system have been derived.

The reachable working space point cloud diagram of the robot manipulator in MATLAB has been obtained based on the kinematics analysis, and the operation trajectory planning of the robot manipulator using the robot toolbox has been obtained. The simulation results show that the robot manipulator system can realize the movement without collision and obstacle avoidance. The space can cover the entire GIS pipeline so as to achieve no blind area operation.

Finally, the GIS inspection robot physical prototype system has been developed through system integration design, and the inspection, maintenance operation experiment has been carried out in the actual GIS equipment. The entire robot system can complete the GIS equipment inspection operation soundly and improve the operation efficiency. The research in this paper has important theoretical significance and practical application value for the optimization design and practical research of the GIS inspection robot system.

With the rapid low-carbon transformation in China, the industrial approach and labor structure of mining enterprises are undergoing constant changes, leading to an increasing psychological dilemma faced by coal miners. This study aims to reveal the relationship and mechanism of factors influencing the psychological dilemma of miners, and to provide optimal intervention strategies for the safety and sustainable development of employees and enterprises.

To effectively address the complex issue of the psychological dilemma faced by miners, this study identifies and constructs five-dimensional elements, comprising 20 indicators, that influence psychological dilemmas. The relational mechanism of action of factors influencing psychological dilemma was then elucidated using an integration of interpretive structural modeling and cross-impact matrix multiplication.

Industry dilemma perception is a “direct” factor with dependent attributes. The perceptions of management response and relationship dilemmas are “root” factors with driving attributes. Change adaptation dilemma perception is a “susceptibility” factor with linkage attributes. Work dilemma perception is a “blunt” factor with both dependent and autonomous attributes.

The aforementioned findings offer a critical theoretical and practical foundation for developing systematic and cascading intervention strategies to address the psychological dilemma mining enterprises face, which contributes to advancing a high-quality coal industry and efficient energy development.

This paper focuses on the application of a robotic technique for modeling a three-wheeled mobile robot (WMR), considering it as a multibody polyarticulated system. Then the dynamic behavior of the developed model is verified using a physical model obtained by Simscape Multibody.

Firstly, a geometric model is developed using the modified Denavit–Hartenberg method. Then the dynamic model is derived using the algorithm of Newton–Euler. The developed model is performed for a three-wheeled differentially driven robot, which incorporates the slippage of wheels by including the Kiencke tire model to take into account the interaction of wheels with the ground. For the physical model, the mobile robot is designed using Solidworks. Then it is exported to Matlab using Simscape Multibody. The control of the WMR for both models is realized using Matlab/Simulink and aims to ensure efficient tracking of the desired trajectory.

Simulation results show a good similarity between the two models and verify both longitudinal and lateral behaviors of the WMR. This demonstrates the effectiveness of the developed model using the robotic approach and proves that it is sufficiently precise for the design of control schemes.

The motivation to adopt this robotic approach compared to conventional methods is the fact that it makes it possible to obtain models with a reduced number of operations. Furthermore, it allows the facility of implementation by numerical or symbolical programming. This work serves as a reference link for extending this methodology to other types of mobile robots.

This study assesses the extent to which integrated extension services contribute to the adoption of climate-smart agriculture (CSA) innovations within the cotton value chain in Burkina Faso.

To address the research question, a probit multivariate econometric model with sample selection is utilized. The model is applied to a random sample of farmers (n = 510), and the endogeneity is addressed through a control function approach.

The study highlights the central role of value chains, particularly in the cotton sector, in overcoming resource scarcity through integrated extension services. Findings show that smallholder farmers who benefit from sound extension services are more willing to adopt and diversify CSA technologies. These include improved seeds, conservation techniques, adapted planting dates and mechanization. This study confirms the synergistic nature of these technologies and emphasizes that effective climate risk mitigation depends on the combined adoption of CSA technologies.

The use of cross-sectional data limits the analysis of long-term farmer behavior, and due to data limitations, the focus was primarily on the contributions of cotton companies and farmers to climate risk mitigation. Future research using panel data across the value chain could provide a more robust insights for policy decision-making.

The study contributes to the existing body of knowledge by emphasizing the crucial role of integrated extension services within the cotton value chain in developing countries. This highlights the critical benefits for farmers and emphasizes the need to diversify modern technologies to effectively combat climate change and its variability in agriculture.

To provide high torques needed to move a robot’s links, electric actuators are followed by a transmission system with a high transmission rate. For instance, gear ratios of 100:1 are often used in the joints of a robotic manipulator. This results into an actuator with large mechanical impedance (also known as nonback-drivable actuator). This in turn generates high contact forces when collision of the robotic mechanism occur and can cause humans’ injury. Another disadvantage of electric actuators is that they can exhibit overheating when constant torques have to be provided. Comparing to electric actuators, pneumatic actuators have promising properties for robotic applications, due to their low weight, simple mechanical design, low cost and good power-to-weight ratio. Electropneumatically actuated robots usually have better friction properties. Moreover, because of low mechanical impedance, pneumatic robots can provide moderate interaction forces which is important for robotic surgery and rehabilitation tasks. Pneumatic actuators are also well suited for exoskeleton robots. Actuation in exoskeletons should have a fast and accurate response. While electric motors come against high mechanical impedance and the risk of causing injuries, pneumatic actuators exhibit forces and torques which stay within moderate variation ranges. Besides, unlike direct current electric motors, pneumatic actuators have an improved weight-to-power ratio and avoid overheating problems.

The aim of this paper is to analyze a nonlinear optimal control method for electropneumatically actuated robots. A two-link robotic exoskeleton with electropneumatic actuators is considered as a case study. The associated nonlinear and multivariable state-space model is formulated and its differential flatness properties are proven. The dynamic model of the electropneumatic robot is linearized at each sampling instance with the use of first-order Taylor series expansion and through the computation of the associated Jacobian matrices. Within each sampling period, the time-varying linearization point is defined by the present value of the robot’s state vector and by the last sampled value of the control inputs vector. An H-infinity controller is designed for the linearized model of the robot aiming at solving the related optimal control problem under model uncertainties and external perturbations. An algebraic Riccati equation is solved at each time-step of the control method to obtain the stabilizing feedback gains of the H-infinity controller. Through Lyapunov stability analysis, it is proven that the robot’s control scheme satisfies the H-infinity tracking performance conditions which indicate the robustness properties of the control method. Moreover, global asymptotic stability is proven for the control loop. The method achieves fast convergence of the robot’s state variables to the associated reference trajectories, and despite strong nonlinearities in the robot’s dynamics, it keeps moderate the variations of the control inputs.

In this paper, a novel solution has been proposed for the nonlinear optimal control problem of robotic exoskeletons with electropneumatic actuators. As a case study, the dynamic model of a two-link lower-limb robotic exoskeleton with electropneumatic actuators has been considered. The dynamic model of this robotic system undergoes first approximate linearization at each iteration of the control algorithm around a temporary operating point. Within each sampling period, this linearization point is defined by the present value of the robot’s state vector and by the last sampled value of the control inputs vector. The linearization process relies on first-order Taylor series expansion and on the computation of the associated Jacobian matrices. The modeling error which is due to the truncation of higher-order terms from the Taylor series is considered to be a perturbation which is asymptotically compensated by the robustness of the control algorithm. To stabilize the dynamics of the electropneumatically actuated robot and to achieve precise tracking of reference setpoints, an H-infinity (optimal) feedback controller is designed. Actually, the proposed H-infinity controller for the model of the two-link electropneumatically actuated exoskeleton achieves the solution of the associated optimal control problem under model uncertainty and external disturbances. This controller implements a min-max differential game taking place between: (i) the control inputs which try to minimize a cost function which comprises a quadratic term of the state vector’s tracking error and (ii) the model uncertainty and perturbation inputs which try to maximize this cost function. To select the stabilizing feedback gains of this H-infinity controller, an algebraic Riccati equation is being repetitively solved at each time-step of the control method. The global stability properties of the H-infinity control scheme are proven through Lyapunov analysis.

Pneumatic actuators are characterized by high nonlinearities which are due to air compressibility, thermodynamics and valves behavior and thus pneumatic robots require elaborated nonlinear control schemes to ensure their fast and precise positioning. Among the control methods which have been applied to pneumatic robots, one can distinguish differential geometric approaches (Lie algebra-based control, differential flatness theory-based control, nonlinear model predictive control [NMPC], sliding-mode control, backstepping control and multiple models-based fuzzy control). Treating nonlinearities and fault tolerance issues in the control problem of robotic manipulators with electropneumatic actuators has been a nontrivial task.

The novelty of the proposed control method is outlined as follows: preceding results on the use of H-infinity control to nonlinear dynamical systems were limited to the case of affine-in-the-input systems with drift-only dynamics. These results considered that the control inputs gain matrix is not dependent on the values of the system’s state vector. Moreover, in these approaches the linearization was performed around points of the desirable trajectory, whereas in the present paper’s control method the linearization points are related with the value of the state vector at each sampling instance as well as with the last sampled value of the control inputs vector. The Riccati equation which has been proposed for computing the feedback gains of the controller is novel, so is the presented global stability proof through Lyapunov analysis. This paper’s scientific contribution is summarized as follows: (i) the presented nonlinear optimal control method has improved or equally satisfactory performance when compared against other nonlinear control schemes that one can consider for the dynamic model of robots with electropneumatic actuators (such as Lie algebra-based control, differential flatness theory-based control, nonlinear model-based predictive control, sliding-mode control and backstepping control), (ii) it achieves fast and accurate tracking of all reference setpoints, (iii) despite strong nonlinearities in the dynamic model of the robot, it keeps moderate the variations of the control inputs and (iv) unlike the aforementioned alternative control approaches, this paper’s method is the only one that achieves solution of the optimal control problem for electropneumatic robots.

The use of electropneumatic actuation in robots exhibits certain advantages. These can be the improved weight-to-power ratio, the lower mechanical impedance and the avoidance of overheating. At the same time, precise positioning and accurate execution of tasks by electropneumatic robots requires the application of elaborated nonlinear control methods. In this paper, a new nonlinear optimal control method has been developed for electropneumatically actuated robots and has been specifically applied to the dynamic model of a two-link robotic exoskeleton. The benefit from using this paper’s results in industrial and biomedical applications is apparent.

A comparison of the proposed nonlinear optimal (H-infinity) control method against other linear and nonlinear control schemes for electropneumatically actuated robots shows the following: (1) Unlike global linearization-based control approaches, such as Lie algebra-based control and differential flatness theory-based control, the optimal control approach does not rely on complicated transformations (diffeomorphisms) of the system’s state variables. Besides, the computed control inputs are applied directly on the initial nonlinear model of the electropneumatic robot and not on its linearized equivalent. The inverse transformations which are met in global linearization-based control are avoided and consequently one does not come against the related singularity problems. (2) Unlike model predictive control (MPC) and NMPC, the proposed control method is of proven global stability. It is known that MPC is a linear control approach that if applied to the nonlinear dynamics of the electropneumatic robot, the stability of the control loop will be lost. Besides, in NMPC the convergence of its iterative search for an optimum depends on initialization and parameter values selection and consequently the global stability of this control method cannot be always assured. (3) Unlike sliding-mode control and backstepping control, the proposed optimal control method does not require the state-space description of the system to be found in a specific form. About sliding-mode control, it is known that when the controlled system is not found in the input-output linearized form the definition of the sliding surface can be an intuitive procedure. About backstepping control, it is known that it cannot be directly applied to a dynamical system if the related state-space model is not found in the triangular (backstepping integral) form. (4) Unlike PID control, the proposed nonlinear optimal control method is of proven global stability, the selection of the controller’s parameters does not rely on a heuristic tuning procedure, and the stability of the control loop is assured in the case of changes of operating points. (5) Unlike multiple local models-based control, the nonlinear optimal control method uses only one linearization point and needs the solution of only one Riccati equation so as to compute the stabilizing feedback gains of the controller. Consequently, in terms of computation load the proposed control method for the electropneumatic actuator’s dynamics is much more efficient.

The work on bridge resilience assessment includes quantitative and qualitative approaches to compare the multiple bridges based on their resilience. But still, the bridge resilience obtained by these assessment approaches is inefficient when prioritising multiple bridges to improve their resilience. Therefore, this study aims to develop a methodology for prioritising the bridges to improve their resilience.

The research methodology follows three sequential phases. In the first phase, criteria importance through intercriteria correlation (CRITIC) technique is used to compute the criteria weights. The criteria considered are age, area, design high flood level, finish road level FRL and resilience index of bridges. While 12 river-crossing bridges maintained by one bridge owner are considered as alternatives. Then, in the second phase, the prioritisation of each bridge is evaluated using five techniques, including technique for order of preference by similarity to ideal solution, VIKOR (in Serbian, Visekriterijumska Optimizacija I Kompromisno Resenje), additive ratio assessment, complex proportional assessment and multi-objective optimisation method by ratio analysis. Finally, in the third phase, the results of all five techniques are integrated using CRITIC and the weighted sum method.

The result of the study enables bridge owners to deal with the particular bridge that requires resilience improvement. The study concluded that it is not enough to consider only the bridge resilience index to improve its resilience. The prioritisation exercise should consider various other criteria that are not preferred during the bridge resilience assessment process.

The proposed methodology is a novel framework based on the existing multi-criteria decision-making (MCDM) techniques for contributing knowledge in the domain of bridge resilience management. It can efficiently overcome the pitfall of decision-making when two bridges have the same resilience index score.

This study presents a two-step numerical iteration method specifically designed to solve absolute value equations. The proposed method is valuable and efficient for solving absolute value equations. Several numerical examples were taken to demonstrate the accuracy and efficiency of the proposed method.

We present a two-step numerical iteration method for solving absolute value equations. Our two-step method consists of a predictor-corrector technique. The new method uses the generalized Newton method as the predictor step. The four-point open Newton-Cotes formula is considered the corrector step. The convergence of the proposed method is discussed in detail. This new method is highly effective for solving large systems due to its simplicity and effectiveness. We consider the beam equation, using the finite difference method to transform it into a system of absolute value equations, and then solve it using the proposed method.

The paper provides empirical insights into how to solve a system of absolute value equations.

This paper fulfills an identified need to study absolute value equations.

This study focused on exploring the performance factors (PFs) that impact Infrastructure Sanitation Projects (ISSPs) in the construction sector. The aim was twofold: firstly, to identify these crucial PFs and secondly, to develop a robust performance model capable of effectively measuring and assessing the intricate interdependencies and correlations within ISSPs. By achieving these objectives, the study aimed to provide valuable insights into and tools for enhancing the efficiency and effectiveness of sanitation projects in the construction industry.

To achieve the study's aim, the methodology for identifying the PFs for ISSPs involved several steps: extensive literature review, interviews with Egyptian industry experts, a questionnaire survey targeting industry practitioners and an analysis using the Relative Importance Index (RII), Pareto principle and analytic network process (ANP). The RII ranked factor importance,  and Pareto identified the top 20% for ANP, which determined connections and interdependencies among these factors.

The literature review identified 36 PFs, and an additional 13 were uncovered during interviews. The highest-ranked PF is PF5, while PF19 is the lowest-ranked. Pareto principle selected 11 PFs, representing the top 20% of factors. The ANP model produced an application for measuring ISSP effectiveness, validated through two case studies. Application results were 92.25% and 91.48%, compared to actual results of 95.77% and 97.37%, indicating its effectiveness and accuracy, respectively.

This study addresses a significant knowledge gap by identifying the critical PFs that influence ISSPs within the construction industry. Subsequently, it constructs a novel performance model, resulting in the development of a practical computer application aimed at measuring and evaluating the performance of these projects.

This paper investigates the interactional relationships between sustainable human resource management (SHRM) and organizational performance (OP). Sustainable HRM is an approach that links HRM and sustainability. These studies focused on integrating HR with sustainable developments, such as economic and social aspects, in favour of focusing on the environmental aspect. Organizational change is an ongoing process that has to be managed effectively to keep the change in place for a long time.

A framework was offered to estimate the cause-and-effect relation of the SHRM and OP factors. Data is gathered from professionals from various pharmaceutical industries. This study applied two methods, Fuzzy AHP and DEMATEL Type II. These techniques are used to understand the cause-and-effect factors and their interactions.

It was observed from the findings that the factor of SHRM, such as Social Justice (F2), Green Job Design (F5), Green Training (F6) and Implementation of Green Policy (F8), was the most critical for the pharmaceutical sector that effects Financial performance (F13), Customer Satisfaction (F15) and Market performance (F14). Pharmaceutical firms ought to coordinate public health advocacy efforts, engage in healthcare initiatives and provide financial support for environmentally friendly efforts that improve social and economic conditions.

For this sustainability, managers concentrate on creating an environment that is healthy and acceptable, and they work hard to mitigate the impact of natural factors and repair damage done to the environment; it is essential to move towards sustainable development to resolve environmental problems. Improving HR efficiency is among essential HRM responsibilities, as they expand the knowledge base of the workforce, enhance human capital, and eventually create valuable intangible assets and promote and encourage sustainable pharmaceutical products for some years.

This research paper has presented exclusive worth to the SHRM and organizational performance literature as it employs fuzzy FAHP and DEMATEL type 2. There is less research on SHRM in the pharmaceutical sector with these factors. In addition, FAHP and TYPE 2 DEMATEL are used in very few researches on SHRM approaches.