Search results

The objective of this research is to evaluate the influence of mineral additions on the mechanical performances of polymer concrete. This study aims to propose a novel approach formulation of polymer concrete based on reduction in the quantity of the binder and disposal of large quantities of industrial by-products and household waste such as the marble, the brick and silica fume whose valuation in polymer concrete could be an interesting ecological and economical alternative. The incorporation of a rate of 10% brick powder affects the distribution of pores inside polymer concrete, that is, the pore diameters become thinner and decrease and the porosity becomes evenly distributed. The recycled mineral brick powder addition in polymer concrete mix improved the mechanical properties.

This polymer concrete was prepared by using polyester resin and two different types of sand, following a new formulation based on an empirical method. Furthermore, the optimal binder percentage was of 20% resin and a mixture of 52% dune sand and 48% quarry sand according to the Abrams method. To achieve our objective, five rates (from 2% to 10%) of brick powder, marble powder and silica fume were examined. Afterwards, its mechanical characteristics were evaluated via a three-point flexural with compressive resistance. The findings indicated that the addition of brick, marble and silica fume to polymer concrete increases the flexural strength with 21.84%, 12.76% and 9.07%, respectively.

Concerning the compressive strength, the best resistance is that of polymer concretes based on brick powder, and this economic formulation of polymer concrete serves the optimal cost/resistance ratio criteria. It allows an improvement in the mechanical resistance of concrete are obtained by adding brick powder that exceed that of the reference concrete.

In the past few decades, there has been several contribution concerning the subject of the reduction of the binder quantity in polymer concretes and adding the industrial and household wastes. However, previous studies revolving around the same area disregarded the effect of the brick powder, which appears scientifically of great importance for enriching the literature.

The present work focuses on evaluating the physical and mechanical characteristics of geopolymer concrete (GPC) by replacing the sodium silicate waste (SSW) in place of traditional river sand. The aim is to create eco-friendly concrete that mitigates the depletion of conventional river sand and conserves natural resources. Additionally, the study seeks to explore how the moisture content of filler materials affects the performance of GPC.

SSW obtained from the sodium silicate industry was used as filler material in the production of GPC, which was cured at ambient temperature. Instead of the typical conventional river sand, SSW was substituted at 25 and 50% of its weight. Three distinct moisture conditions were applied to both river sand and SSW. These conditions were classified as oven dry (OD), air dry (AD) and saturated surface dry (SSD).

As the proportion of SSW increased, there was a decrease in the slump of the GPC. The setting time was significantly affected by the higher percentage of SSW. The presence of angular-shaped SSW particles notably improved the compressive strength of GPC when replacing a portion of the river sand with SSW. When exposed to elevated temperatures, the performance of the GPC with SSW exhibited similar behavior to that of the mix containing conventional river sand, but it demonstrated a lower residual strength following exposure to elevated temperatures.

Exploring the possible utilization of SSW as a substitute for river sand in GPC, and its effects on the performance of the proposed mix. Analyzing, how varying moisture conditions affect the performance of GPC containing SSW. Evaluating the response of the GPC with SSW exposed to elevated temperatures in contrast to conventional river sand.

The global construction industry faces both challenges and opportunities from electronic waste (e-waste). This study aims to present a bibliometric analysis and comprehensive literature assessment on e-waste in concrete construction materials.

This study studies 4,122 Scopus documents to examine garbage generation in different countries and inventive ways to integrate e-waste into construction as a sustainable strategy. This study lists famous researchers and their cooperation networks, demonstrating a robust and dynamic area with a surge in research output, notably from 2018 to 2022. Data is visually represented using VOS Viewer to show trends, patterns and study interests throughout time.

The findings imply that e-waste can improve construction materials’ mechanical characteristics and sustainability. The results are inconsistent and suggest further optimization. e-Waste into construction has garnered scientific interest for its environmental, life cycle, and economic impacts. This field has great potential for improving e-waste material use, developing sophisticated prediction models, studying environmental implications, economic analysis, policy formulation, novel construction methods, global cooperation and public awareness. This study shows that e-waste can be used in sustainable building. It stresses this area’s need for research and innovation. This lays the groundwork for using electronic trash in buildings, which promotes a circular economy and environmental sustainability.

The findings underscore the critical role of ongoing research and innovation in leveraging e-waste for sustainable building practices. This study lays the groundwork for integrating e-waste into construction, contributing to the advancement of a circular economy and environmental sustainability.

The social implications of integrating e-waste into construction are significant. Using e-waste not only addresses environmental concerns but also promotes social sustainability by creating new job opportunities in the recycling and construction sectors. It fosters community awareness and responsibility towards sustainable practices and waste management. Additionally, this approach can reduce construction costs, making building projects more accessible and potentially lowering housing prices.

This research contributes to the field by offering a bibliometric analysis and comprehensive assessment of e-waste in concrete construction materials, highlighting its global significance.

The energy generation process through photovoltaic (PV) panels is contingent upon uncontrollable variables such as wind patterns, cloud cover, temperatures, solar irradiance intensity and duration of exposure. Fluctuations in these variables can lead to interruptions in power generation and losses in output. This study aims to establish a measurement setup that enables monitoring, tracking and prediction of the generated energy in a PV energy system to ensure overall system security and stability. Toward this goal, data pertaining to the PV energy system is measured and recorded in real-time independently of location. Subsequently, the recorded data is used for power prediction.

Data obtained from the experimental setup include voltage and current values of the PV panel, battery and load; temperature readings of the solar panel surface, environment and the battery; and measurements of humidity, pressure and radiation values in the panel’s environment. These data were monitored and recorded in real-time through a computer interface and mobile interface enabling remote access. For prediction purposes, machine learning methods, including the gradient boosting regressor (GBR), support vector machine (SVM) and k-nearest neighbors (k-NN) algorithms, have been selected. The resulting outputs have been interpreted through graphical representations. For the numerical interpretation of the obtained predictive data, performance measurement criteria such as mean absolute error (MAE), mean squared error (MSE), root mean squared error (RMSE) and R-squared (R²) have been used.

It has been determined that the most successful prediction model is k-NN, whereas the prediction model with the lowest performance is SVM. According to the accuracy performance comparison conducted on the test data, k-NN exhibits the highest accuracy rate of 82%, whereas the accuracy rate for the GBR algorithm is 80%, and the accuracy rate for the SVM algorithm is 72%.

The experimental setup used in this study, including the measurement and monitoring apparatus, has been specifically designed for this research. The system is capable of remote monitoring both through a computer interface and a custom-developed mobile application. Measurements were conducted on the Karabük University campus, thereby revealing the energy potential of the Karabük province. This system serves as an exemplary study and can be deployed to any desired location for remote monitoring. Numerous methods and techniques exist for power prediction. In this study, contemporary machine learning techniques, which are pertinent to power prediction, have been used, and their performances are presented comparatively.

This study aims to enhance our understanding of sustainable water management in construction through a life-cycle embodied water assessment of a villa in the United Arab Emirates (UAE). It provides insights and recommendations for improving the water efficiency by identifying areas for potential embodied water saving and reduction in environmental impacts in the construction industry.

This study uses a life-cycle assessment (LCA) approach and focuses on a UAE villa as a case study. It analyses the embodied water consumption during construction (initial embodied water) and maintenance (recurrent embodied water) using an input–output-based hybrid analysis. Additionally, it compares the embodied water observations with the operational water usage and comprehensively evaluates the water consumption in the villa’s life-cycle.

The initial (28%) and recurrent embodied water (42%) represent significant proportions of a building’s life-cycle water demand. The structural elements, predominantly concrete and steel, contribute 40% of the initial embodied water consumption. This emphasises the importance of minimising the water usage in these materials. Similarly, internal finishes account for 47% of the recurrent embodied water. This emphasises the importance of evaluating the material service life.

These findings indicate the efficacy of using durable materials with low embodiment and water-efficient construction methods. Additionally, collaborative research between academia, industry, and the government is recommended in conjunction with advocating for policies promoting low embodied-water materials and transparency in the construction sector through embodied water footprint reporting.

Previous studies focused on the operational water and marginally addressed the initial embodied water. Meanwhile, this study highlights the significance of the initial and recurrent embodied water in the life-cycle water demand. It emphasises on the need for adaptable buildings with reduced embodied water and more durable materials to minimise the requirement for frequent material replacements.

This study evaluates the architectural status of circular prototype mosques in Kuwait. The argument is that the once dominant and powerful image of mosques is now merely a repetitive reproduction through the prototype scheme. The study focuses on the circular prototype design, which has been constructed in many of Kuwait's recent residential areas. It evaluates qualitatively the worshipers' experiences of these mosques.

The research methodology is qualitative. The main question is how well the circular prototype mosques are received by worshipers and local communities. Various research methods were used, including walk-through survey and group interview with worshipers and semi-structured interview with key informants in Public Authority for Housing Welfare and Ministry of Awqaf and Islamic Affairs. Purposive sampling was chosen to select for key informants. Time-location sampling was selected for worshipers' group interview.

Circular prototype presents several weaknesses. The community did not receive the circular design well as it deviates from the traditional and modern rectangular mosque design prevalent in Kuwait. This research highlights the importance of considering traditional design principles, community preferences and functional requirements while designing a mosque. It also emphasizes the need for an extensive evaluation of prototype designs to identify potential weaknesses before proceeding with the final design.

It is recommended that future mosque design projects in Kuwait consider traditional design principles; community preferences; and financial, functional and sustainability requirements. In addition, the findings of this study can be used to inform future mosque design projects in Kuwait and to ensure that they are functional, cost-effective and well received by the community.

This research provides an informative and comprehensive analysis of Kuwait's prototype mosque designs from the 1950s to the present day. It focuses on the current circular prototype, critically examining its advantages and disadvantages. This research is the first to evaluate the history and design improvements over the years. As such, this research offers invaluable information to those interested in Kuwait's religious architecture and cultural history.

Environmental pollution has increased as a result of modern settlements' expanding demand and rapid population growth. In Ebonyi State, Nigeria, quarrying is one of the activities that has an impact on the environment and ecosystem. The aim of the study is to assess stream water’s quality in order to ascertain how quarry operations affect the streams’ water quality. The present study investigated the environmental impact of quarrying on the physicochemical properties of surface water in Ebonyi State, Nigeria.

A total of 288 surface water samples were taken in 2018, 2019 and 2020 from quarry locations and a Control location for the determination of physicochemical properties and heavy metal contents using standard analytical methods. Datasets were analysed using Fisher’s significance least difference (F-LSD) at the 0.05 probability level.

This study discovered that surface waters around quarries are severely polluted, according to the results of the physico-chemical and heavy metal contents of the surface waters. Most of the physical and chemical properties of the water downstream of the Ishiagu, Umuoghara and Ngbo did not meet World Health Organisation (WHO) standards, such as colour and pH. The heavy metal levels in the Ishiagu, Umuoghara and Ngbo streams were above WHO criteria for Pb, Cd and Fe. The results point to the obvious conclusion, without prejudice to other unexplained factors that the pollution is most likely the result of quarry contamination. Strict measures should be taken to regularly monitor the water quality of the streams.

This study focused on the assessment of physicochemical properties using standard analytical methods to evaluate the environmental impact of quarrying on surface water qualities. The study used the World Health Organisation (WHO, 2011) water guideline as a standard to compare with the study dataset and control measures.

After completion of the case study, students will be able to identify the strategic key components of the Woolah tea brand through the business model canvas framework, to evaluate the major challenges faced by different stakeholders, to analyse the potential effects of bagless tea dip innovation and understand the principles of design thinking and its application in developing innovative solutions, to assess the strategic framework of Woolah tea brand to scale up its business and operations and to align the Woolah tea brand’s sustainability practices with a triple bottom line approach and contribution to UN Sustainable Development Goals.

Upamanyu Borkakoty and Anshuman Bharali, the founder duo of Woolah tea, began their entrepreneurial journey on a noble note. They recognised that plastic tea bags, which customers worldwide consume, create harmful health effects in the form of microplastic. They aimed to provide an authentic and sustainable tea experience while making it microplastic-free. When the world is heading towards securing a sustainable future, they envisioned adding a feather to it by proposing their Truedips. The USP of their product is Truedips – a tea ball they prepare by compressing one bud and two premier leaves. The founders were convinced that their innovative idea of tea consumption would provide customers with an authentic and exhilarating experience. However, there were dilemmas and roadblocks. They faced roadblocks related to the farmer’s traditional approach to growing tea, untrained tea growers, lack of financial assistance and customer readiness for a bagless tea experience. The dilemmas they faced related to their customer acceptance of their idea and the price affordability of the product. The big question hovering around was the customer’s feedback and acceptance of the product.

This case study suits graduate and postgraduate business administration students and other management programmes. The case study can also be used for business, marketing, design thinking, innovation and and social entrepreneurship courses.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

This study aims to address sustainability challenges in construction by exploring the structural performance and environmental benefits of incorporating pozzolanic waste glass (WG) into ultra-high-performance reinforced concrete (UHPRC) beams.

A comprehensive evaluation of UHPRC beams was conducted, incorporating varying ratios (10%, 20% and 30%) of WG powder alongside a consistent 0.75% inclusion of basalt fiber. The investigation encompassed the entire UHPRC production process, including curing, casting and molding, while evaluating workability and physical properties. Furthermore, the environmental impact, particularly CO₂ emissions associated with UHPRC mixture components, was also assessed. Type K thermocouples were employed to analyze temperature dynamics during fabrication, providing valuable insights.

The findings demonstrate positive implications for using pozzolanic WG as a cement substitute in UHPRC beams.

This research stands out for its unique focus on the combined effects of incorporating recycled pozzolanic glass waste on the structural performance and environmental footprint of UHPRC beams.

Interior workspace environments use exclusively artificial light, resulting in a loss of biological connection and natural light quality, as well as greater energy consumption. The purpose of the study is to identify a suitable system that can provide natural light to such interior spaces throughout the day while supplementing it with artificial light when necessary. The fundamental aim is to provide insights into the most effective solutions for energy-efficient lighting design in the UAE's environment, with the potential to lower energy consumption related to interior lighting.

The study adopted an empirical approach to gather and analyze primary data based on field measurements to understand and assess existing lighting conditions, as well as DIALux lighting simulation software to test the efficacy of the proposed HLS in terms of natural light delivery, illumination quality and energy consumption. A branch of a local bank in the United Arab Emirates, situated inside one of the shopping malls where there is no natural light penetration, has been chosen as a case study.

The findings of comparing the base case to four probable scenarios that used HLS revealed that the third scenario, which uses 100% pure sunshine and 35% artificial LED light during daylight operations and 100% LED light during night duty, is considered to be optimal in terms of illumination quality and energy efficiency.

The study demonstrated the potential of innovative lighting to improve the visual working environment in interior spaces with limited access to direct natural lighting, especially in arid regions, where sunlight is plentiful throughout the year. The study contributes new insights into the establishment of lighting-related recommendations and standards for the UAE context. This may include advice for sustainable construction practices, lighting guidelines or incentives to encourage the use of hybrid lighting technology in commercial and institutional buildings.