Search results

This paper aims to overcome the inability of both comparing loss costs and accounting for production resource losses of Overall Equipment Effectiveness (OEE)-related approaches.

The authors conducted a literature review about the studies focusing on approaches combining OEE with monetary units and/or resource issues. The authors developed an approach based on Overall Equipment Cost Loss (OECL), introducing a component for the production resource consumption of a machine. A real case study about a smart multicenter three-spindle machine is used to test the applicability of the approach.

The paper proposes Resource Overall Equipment Cost Loss (ROECL), i.e. a new KPI expressed in monetary units that represents the total cost of losses (including production resource ones) caused by inefficiencies and deviations of the machine or equipment from its optimal operating status occurring over a specific time period. ROECL enables to quantify the variation of the product cost occurring when a machine or equipment changes its health status and to determine the actual product cost for a given production order. In the analysed case study, the most critical production orders showed an actual production cost about 60% higher than the minimal cost possible under the most efficient operating conditions.

The proposed approach may support both production and cost accounting managers during the identification of areas requiring attention and representing opportunities for improvement in terms of availability, performance, quality, and resource losses.

This study investigates the relationships among digital transformation, technological innovation, industry–university–research collaborations and labor income share in manufacturing firms.

The relationships are tested using an empirical method, constructing regression models, by collecting 1,240 manufacturing firms and 9,029 items listed on the A-share market in China from 2013 to 2020.

The results indicate that digital transformation has a positive effect on manufacturing companies’ labor income share. Technological innovation can mediate the effect of digital transformation on labor income share. Industry–university–research cooperation can positively moderate the promotion effect of digital transformation on labor income share but cannot moderate the mediating effect of technological innovation. Heterogeneity analysis also found that firms without service-based transformation and nonstate-owned firms are better able to increase their labor income share through digital transformation.

This study provides a new path to increase the labor income share of enterprises to achieve common prosperity, which is important for manufacturing enterprises to better transform and upgrade to achieve high-quality development.

This study aims to improve a construction company's overall project delivery by utilising lean six sigma (LSS) methods combined with building information modelling (BIM) to design, modularise and manufacture various building elements in a controlled factory environment off-site.

A case study in a construction company utilised lean six sigma (LSS) methodology and BIM to identify non-value add waste in the construction process and improve sustainability.

An Irish-based construction company manufacturing modular pipe racks for the pharmaceutical industry utilised LSS to optimise and standardise their off-site manufacturing (OSM) partners process and leverage BIM to design skids which could be manufactured offsite and transported easily with minimal on-site installation and rework required. Productivity was improved, waste was reduced, less energy was consumed, defects were reduced and the project schedule for completion was reduced.

The case study was carried out on one construction company and one construction product type. Further case studies would ensure more generalisability. However, the implementation was tested on a modular construction company, and the methods used indicate that the generic framework could be applied and customized to any offsite company.

This is one of the few studies on implementing offsite manufacturing (OSM) utilising LSS and BIM in an Irish construction company. The detailed quantitative benefits and cost savings calculations presented as well as the use of the LSM methods and BIM in designing an OSM process can be leveraged by other construction organisations to understand the benefits of OSM. This study can help demonstrate how LSS and BIM can aid the construction industry to be more environmentally friendly.

The concept of productivity is central to performance management and decision-making, although it is complex and multifaceted. This paper aims to describe a methodology based on the use of Big Data in a cluster analysis combined with a data envelopment analysis (DEA) that provides accurate and reliable productivity measures in a large network of retailers.

The methodology is described using a case study of a leading kitchen furniture producer. More specifically, Big Data is used in a two-step analysis prior to the DEA to automatically cluster a large number of retailers into groups that are homogeneous in terms of structural and environmental factors and assess a within-the-group level of productivity of the retailers.

The proposed methodology helps reduce the heterogeneity among the units analysed, which is a major concern in DEA applications. The data-driven factorial and clustering technique allows for maximum within-group homogeneity and between-group heterogeneity by reducing subjective bias and dimensionality, which is embedded with the use of Big Data.

The use of Big Data in clustering applied to productivity analysis can provide managers with data-driven information about the structural and socio-economic characteristics of retailers' catchment areas, which is important in establishing potential productivity performance and optimizing resource allocation. The improved productivity indexes enable the setting of targets that are coherent with retailers' potential, which increases motivation and commitment.

This article proposes an innovative technique to enhance the accuracy of productivity measures through the use of Big Data clustering and DEA. To the best of the authors’ knowledge, no attempts have been made to benefit from the use of Big Data in the literature on retail store productivity.

This study aims to explore how managers exercise agency in strategic investment decisions (SIDs) by drawing on their knowledgeability of the strategic context. Specifically, the authors address the role of position–practice relations and irresistible causal forces in this conduct.

The authors examine SID-making (SIDM) practices in four case organisations operating in highly competitive markets, conducting interviews with managers at various levels and analysing company documents. Drawing on strong structuration theory, the authors show how managerial decision makers draw upon their knowledge of organisational context when exercising agency in SIDs.

The authors provide insights into how SIDM behaviour, specifically agents’ conduct, is shaped by a combination of position–practice relations and the agents’ comprehension of their organisation’s context.

The authors extend the SIDM literature by surfacing the issue of how actors’ conjuncturally-specific knowledge of external structures shapes the general dispositions they draw on in exercising agency in practice.

The authors extend the SIDM literature by surfacing the issue of how actors’ conjuncturally-specific knowledge of external structures shapes the general dispositions they draw on in exercising agency in practice. Particularly, the authors contribute to this literature by identifying irresistible causal forces and illuminating why actors might not resist in SIDM processes, despite having the potential to do so.

This research aims to analyse the perceptions of practitioners in three regions regarding the challenges faced by their firms during the pandemic, considered a black-swan event. It examines the strategies implemented to mitigate and recover from risks, evaluates the effectiveness of these strategies and assesses the difficulties encountered in their implementation.

In the summer of 2022, an online survey was conducted among supply chain (SC) practitioners in France, Poland and the St. Louis, Missouri region of the USA. The survey aimed to understand the impact of COVID-19 on their firms and the SC strategies employed to sustain operations. These regions were selected due to their varying levels of SC development, including infrastructure, economic resources and expertise. Moreover, they exhibited different responses in safeguarding the well-being of their citizens during the pandemic.

The study reveals consistent perceptions among practitioners from the three regions regarding the impact of COVID-19 on SCs. Their actions to enhance SC resilience primarily relied on strengthening collaborative efforts within their firms and SCs, thus validating the tenets of the relational view.

COVID-19 is (hopefully) our black-swan pandemic occurrence during our lifetime. Nevertheless, the lessons learned from it can inform future SC risk management practices, particularly in dealing with rare crises. During times of crisis, leveraging existing SC structures may prove more effective and efficient than developing new ones. These findings underscore the significance of relationships in ensuring SC resilience.

The purpose of this paper is to understand if and how industrialized house building (IHB) could support productivity developments for housebuilding on project and industry levels. The take is that fragmentation of construction is one explanation for the lack of productivity growth, and that IHB could be an integrating method of overcoming horizontal and vertical fragmentation.

Singe-factor productivity measures are calculated based on data reported by IHB companies and compared to official produced and published research data. The survey covers the years 2013–2020 for IHB companies building multi-storey houses in timber. Generalization is sought through descriptive statistics by contrasting the data samples to the used means to control vertical and horizontal fragmentation formulated as three theoretical propositions.

According to the results, IHB in timber is on average more productive than conventional housebuilding at the company level, project level, in absolute and in growth terms over the eight-year period. On the company level, the labour productivity was on average 10% higher for IHB compared to general construction and positioned between general construction and general manufacturing. On the project level, IHB displayed an average cost productivity growth of 19% for an employed prefabrication degree of about 45%.

Empirical evidence is presented quantifying so far perceived advantages of IHB. By providing analysis of actual cost and project data derived from IHB companies, the article quantifies previous research that IHB is not only about prefabrication. The observed positive productivity growth in relation to the employed prefabrication degree indicates that off-site production is not a sufficient mean for reaching high productivity and productivity growth. Instead, the capabilities to integrate the operative logic of conventional housebuilding together with logic of IHB platform development and use is a probable explanation of the observed positive productivity growth.

Despite the significance of the construction industry to the nation's economic growth, there is empirical evidence that the sector is lagging behind other industries in terms of productivity growth. The need for improvements inspired the industry's stakeholders to consider using emerging technologies that support the enhancement. This research aims to report augmented reality applications essential for contractors' productivity improvement.

This study systematically reviewed academic journals. The selection of journal articles entailed searching Scopus and Web of Science databases. Relevant articles for reviews were identified and screened. Content analysis was used to classify key applications into six categories. The research results were limited to journal articles published between 2010 and 2021.

Augmented reality can improve construction productivity through its applications in assembly, training and education, monitoring and controlling, interdisciplinary function, health and safety and design information.

The research provides a direction for contractors on key augmented reality applications they can leverage to improve their organisations' productivity.