Search results

This study aims to observe the coloring efficacy of graphite (G) and nano bentonite clay (BCNPs) on the adsorption of Basic Blue 5 dye from residual dye bath solution.

Some factors that affected the adsorption processes were examined and found to have significant impacts on the adsorption capacity such as the initial concentration of G and/or BCNPs (Co: 40–2,320 mg/L), adsorbent bath pH (4–9), shaking time (30–150 min.) and initial dye concentration (40–200 mg/L). The adsorption mechanism of dye by using G and/or BCNPs was studied using two different models (first-pseudo order and second-pseudo order diffusion models). The equilibrium adsorption data for the dye understudy was analyzed by using four different models (Langmuir, Freundlich, Temkin modle and Dubinin–Radushkevich) models.

It has been found that the adsorption kinetics follow rather a pseudo-first-order kinetic model with a determination coefficient (R²) of 0.99117 for G and 0.98665 for BCNPs. The results indicate that the Freundlich model provides the best correlation for G with capacities q_max = 2.33116535 mg/g and R² = 0.99588, while the Langmuir model provides the best correlation for BCNPs with R² = 0.99074. The adsorbent elaborated from BCNPs was found to be efficient and suitable for removing basic dyes rather than G from aqueous solutions due to its availability, good adsorption capability, as well as low-cost preparation.

There is no research limitation for this work. Basic Blue 5 dye graphite (G) and nano bentonite clay (BCNPs) were used.

This work has practical applications for the textile industry. It is concluded that using graphite and nano bentonite clay can be a possible alternative to adsorb residual dye from dye bath solution and can make the process greener.

Socially, it has a good impact on the ecosystem and global community because the residual dye does not contain any carcinogenic materials.

The work is original and contains value-added products for the textile industry and other confederate fields.

This study aims to demonstrate that orange-derived and lemon-derived systems can be used in continuous processes as efficient adsorbents to the entrapment of some anionic and cationic dyes in the textile dyeing wastewater effluents.

Physically and chemically modified orange and lemon mesocarps are used as natural adsorbents for the cationic dyes Basic Blue 3, Basic Yellow 21, Basic Red 18 and Basic Green 4 and the anionic dyes Acid Blue 264, Acid Yellow 49 and Acid Red 337, all commonly used in the textile dyeing industry. Adsorption capacities of the orange-derived and lemon-derived adsorbents on the dyes are studied simulating a batch and continuous industrial processes.

Results demonstrate that treated orange mesocarp (orange-derived adsorbent) can adsorb up to 97% of cationic Basic Green 4 in 30 min, whereas the lemon mesocarp (lemon-derived adsorbent) can retain up to 88% within the same time. In the case of anionic, 91% Acid Blue 264 is adsorbed by the orange mesocarp in 15 min, whereas 92% is adsorbed by the lemon homologue within the same time.

As far as the authors know, physically and chemically modified orange and lemon mesocarps have not been used on the removal of cationic (Basic Blue 3, Basic Yellow 21, Basic Red 18 and Basic Green 4) and anioinic (Acid Blue 264, Acid Yellow 49 and Acid Red 337) dyes of textile dyeing wastewater industry. It is a costless and efficient treatment that supposes, on the one hand, an eco-friendly and feasible process for discolouration of wastewater and, on the other, a valorisation (upcycling) of orange and lemon peels, which are not currently used.

The novelty addressed here is undertaken by using tailor-made and fully characterized starch nanoparticles (SNPs) having a particle size ranging from 80 to 100 nm with a larger surface area, biodegradability and high reactivity as a starting substrate for cadmium ions and basic dye removal from wastewater effluent. This was done via carboxylation of SNPs with citric acid via esterification reaction using the dry preparation technique, in which a simple, energy-safe and sustainable process concerning a small amount of water, energy and toxic chemicals was used. The obtained adsorbent is designated as cross-linked esterified starch nanoparticles (CESNPs).

The batch technique was used to determine the CESNPs adsorption capacity, whereas atomic adsorption spectrometry was used to determine the residual cadmium ions concentration in the filtrate before and after adsorption. Different factors affecting adsorption were examined concerning pH, contact time, adsorbent dose and degree of carboxylation. Besides, to validate the esterification reaction and existence of carboxylic groups in the adsorbent, CESNPs were characterized metrologically via analytical tools for carboxyl content estimation and instrumental tools using Fourier-transform infrared spectroscopy (FTIR) spectra and scanning electron microscopy (SEM) morphological analysis.

The overall adsorption potential of CESNPs was found to be 136 mg/g when a 0.1 g adsorbent dose having 190.8 meq/100 g sample carboxyl content at pH 5 for 60 min contact time was used. Besides, increasing the degree of carboxylation of the CESNPs expressed as carboxyl content would lead to the higher adsorption capacity of cadmium ions. FTIR spectroscopy analysis elucidates the esterification reaction with the appearance of a new intense peak C=O ester at 1,700 cm⁻¹, whereas SEM observations reveal some atomic/molecules disorder after esterification.

The innovation addressed here is undertaken by studying the consequence of altering the extent of carboxylation reaction expressed as carboxyl contents on the prepared CESNPs via a simple dry technique with a small amount of water, energy and toxic chemicals that were used as a sustainable bio nano polymer for cadmium ions and basic dye removal from wastewater effluent in comparison with other counterparts published in the literature.

The main purpose of this paper is to investigate the adsorption properties of CoFe_1.9Mo_0.1O₄ magnetic nanoparticles (CFMo MNPs) using, anionic dye “congo red (CR)” as a model of water pollutants.

The magnetic nano-adsorbent was synthesized via sol-gel process. Different techniques including; Fourier transform infrared spectroscopy, point of zero charge, scanning electron microscope and X-ray powder diffraction were used to characterize the prepared adsorbent. Adsorption experiments were conducted in batch mode under various conditions (contact time, shaking speed, initial dye concentration, initial solution pH, solution temperature and adsorbent amount) to investigate the adsorption capability of CFMo MNPs for CR.

The results showed that, CFMo MNPs could successfully remove more than 90% of CR dye within 20 min. Adsorption kinetics and isotherms were better described using pseudo-second-order (PSO) and Langmuir models, respectively. The maximum adsorbed amount (q_max) of CR dye was 135.14 mg/g. The adsorption process was found to be endothermic and spontaneous in nature as demonstrated by the thermodynamics ( ΔGo, ΔHoand ΔSo).

This study provided a good example of using an easily separated magnetic nano-adsorbent for fast removal of a very toxic organic pollutant, congo red, from the aquatic environment

The employment of Mo-doped cobalt ferrite for the first time for removing hazardous anionic dyes such as congo red from their aqueous solutions.

Cationic resin is widely used in decolouring of textile wastewaters. Tonnes of resin are used in sector, and disposal of resin is being a second waste problem. The purpose of this paper is to investigate the adsorption behaviour of the methylene blue cationic dye from aqueous solution on the cation exchanger Lewatit CNP80 to understand the regenerability of cation exchanger resin from textile wastewaters.

Cationic resin was used as an alternative low-cost adsorbent for removing methylene blue dye from textile wastewaters. The adsorption study was carried out in the batch mode. Batch adsorption studies were carried out to examine the effect of parameters such as methylene blue concentration, temperature, pH, resin dose, shaking speed and contact time.

It was observed that dye-removal capacity of resin was reached from 17 mgg⁻¹ to 19.4 mgg⁻¹ at 25 °C temperature, pH 5 in 15 min. At the appropriate range of parameters, it was observed that more than 98% removal efficiency was achieved for methylene blue dye, and also, this study was focussed on whether the resin regenerates. In regeneration studies, our purpose was to recover of non-regenerable exhausted cationic resin by NaOCl. Regeneration of Lewatit CNP80 was performed in five cycles. After regeneration, the authors tried to determine whether the adsorption capacity was affected by regeneration.

In this study, the authors focussed on regeneration studies. The aim is to find easy, low-cost regeneration agent. In conclusion, the authors found that NaOCl is eligible for regeneration studies. The exhausted resin was recovered by NaOCl, and the authors also tested 5th regeneration cycles. Sodium hypochlorite is not a common regeneration agent for adsorption studies. Generally, resin is regenerated by HCl or other regeneration agent products. As a result of that, operational cost was reduced, and the other thing that the authors want to emphasise is textile industry wastewater based high temperature; therefore, this regeneration study can easily work with textile industries.

The removal efficiency of lead [Pb(II)], zinc [Zn(II)], nickel [Ni(II)] and chromium [Cr(VI)] from aqueous solutions by adsorption on non‐conventional materials (rice husk and sawdust) in its natural form and on their chemically modified form is presented. It is found that adsorption potential varies as a function of contact time, concentration, particle size, pH and flow rate. Of all the low cost adsorbents used in this study, sawdust is found to possess greater adsorption efficiency for all metals than rice husk under identical experimental conditions. Chemically activated sawdust could remove 95 percent of Pb(II), 93 percent of Zn(II), 80 percent of Ni(II) and 75 percent of Cr(VI) from the metal bearing industrial effluents.

Purpose – In this study, the possibility of the application of rice husks for adsorbing Mn(II) ion in the water phase has been studied.

Design/Methodology/Approach – Experimental studies have been initiated by preparing activated carbon from rice husks. The activation of rice husks was done using both physical and chemical treatment methods through heating at 110 °C and washing with citric acid activator at 0.2 M, 0.4 M, and 0.6 M. The adsorption tests were conducted as two part tests: preliminary and primary. The preliminary test was conducted to choose the best condition of four independent variables, i.e., contact time (0–120 minutes), activator concentrations (0.2, 0.4, and 0.6 M), initial Mn(II) concentrations (10, 20, 50, 100, 200, and 400 mg/L), and adsorption temperatures (30, 47, and 67 °C).

Findings – By identifying the substituted groups using Fourier Transform Infrared Spectroscopy after activation with citric acid, it was found that the highest transmittance percentage was present in activated carbon with 0.2 M of citric acid. The best adsorption capacity and efficiency was 13.87 mg/g and 79.60%, respectively, which were obtained at 200 mg/L initial concentration with a 0.2 M citric acid concentration for 120 min contact time at 47 °C. These results lead to a conclusion that rice husks after activation with citric acid can be applied as an adsorbent for Mn(II) adsorption in the water phase.

Research Limitations/Implications – The activated carbon produced was only applicable for the adsorption of Mn(II) ions from the water phase, but not applicable for the adsorption of other heavy metals ions.

Practical Implications – Rice husks were potentially prepared as an adsorbent for Mn(II) ion adsorption in the water phase that was low cost, environmental friendly, and easy to prepare.

Originality/Value – Activated carbon prepared from biomass was mostly carried out using acids at high concentrations while the study was conducted using weak acids (citric acid) at low concentrations.

This paper aims to improve the adsorption capacity of sugarcane bagasse (SCB) as a low-cost, attractive and effective adsorbent for dye removal from wastewater.

SCB is a cellulosic material; it was chemically modified with compounds containing cationic groups. The adsorption efficiency of unmodified and modified SCB was investigated with anionic dyes by studying various factors that affect modified SCB and adsorption.

X-ray diffraction, FT-IR spectra and nitrogen content were used to confirm the effect of existence of quaternary ammonium groups on modified SCB. The morphological structure of the modified and unmodified SCB has been demonstrated using electronic scanning microscopy.

The modified SCB was chemically treated by Quat 188, which is commercially available in the solution of 3-chloro-2-hydroxypropyltrimethyl ammonium chloride.

Grafting cationic function groups on the surface of sugarcane by cationization treatment enhances its adsorption efficiency for anionic dyes.

The main value of this research was indicating a clear difference in the appearance of unmodified and modified SCB surfaces. Furthermore, it can be determined that the modified SCB absorbs more of the dyes.

Water is a vital natural resource without which life on earth would be impossible. Properties of synthetic dyes like high stability and noxious nature make it difficult to remove them from the effluent. This review focuses on the removal of synthetic dyes using nanoparticles (NPs) based on the adsorption principle.

Adsorption technique is widely used to remove synthetic dyes from their aqueous solution for decades. Synthetic dye removal using NPs is promising, less energy-intensive and has become popular in recent years. NPs are in high demand for treating wastewater using the adsorption principle due to their tiny size and vast surface area. To maximise environmental sustainability, the utilisation of green-produced NPs as efficient catalysts for dye removal has sparked attention amongst scientists.

This review has prioritised research and development of optimal dye removal systems that can be used to efficiently remove a large quantity of dye in a short period while safeguarding the environment and producing fewer harmful by-products. The removal efficiency of synthetic dye using different NPs in wastewater treatment varies mostly between 75% to almost 100%. This review will aid in the scaling up of the wastewater treatment process.

There is a lack of research emphasis on the safe disposal of NPs once the reuse efficiency significantly drops. The relevance of cost analysis is equally critical, yet only a few papers discuss cost-related information.

Comprehensive and planned research in this area can aid in the development of long-term wastewater treatment technology to meet the growing need for safe and reliable water emphasising reuse and desorption efficiency of the NPs.

This paper aims to investigate the potential application of Balanites aegyptiaca bark powder (BABP) for removing a basic textile dye, methylene blue (MB), from aqueous solutions.

The biosorbent (BABP) was characterized using Fourier transform infrared spectroscopy (FTIR) and point of zero charge (pH_PZC). Batch mode was selected to study the biosorption of MB onto BABP surface at different experimental conditions (shaking speed, contact time, initial solution pH, ionic strength, solution temperature, biosorbent dosage and initial dye concentration). Besides, the reusability of BABP for MB biosorption was also examined.

The biosorption results revealed that approximately 96% of MB was removed successfully at the optimized operational conditions. Pseudo-second-order and Langmuir models, respectively, better described the adsorption kinetics and isotherms. The monolayer biosorption capacity (q_max) for MB was about 97.09 mg/g. According to thermodynamics findings, the MB biosorption onto BABP is an exothermic and spontaneous process. The results demonstrate that BABP can be considered as potential eco-friendly, readily available and low-cost biosorbent for hazardous textile dyes removal from water bodies and also provides a promising method for minimization of agricultural solid wastes (e.g. plant barks).

The utilization of Balanites aegyptiaca bark powder (BABP), solid waste material, as low-cost and eco-friendly biosorbent for the removal of hazardous basic textile dye (methylene blue) from the aquatic environment.