Search results

Based on new data insulation resistance tests have little capacity to predict the life performance of double‐sided rigid printed wiring boards. This conclusion arises from an elaborate insulation resistance evaluation after 2300 hours of accelerated life testing. The study considers the effects of two sources of contamination and five material combinations on the initial insulation resistance at 23°C and 90% RH. Life test samples were exposed to four levels of humidity and three levels of temperature. Using 1 Megohm as failure criterion there are clear‐cut effects of humidity, temperature and material combination, but there is only a weak correlation between failures and the initial insulation resistance.

The purpose of this paper is to develop and test a method that can gradually find a sweet spot between user experience and visual intensity of website elements to maximise user conversion with minimal adverse effect.

In the first phase of the study, the authors develop the method. In the second stage, the authors test and evaluate the method via an empirical study; also, an experiment was conducted within web interface with the gradual intensity of visual elements.

The findings reveal that the negative response grows faster than conversion when the visual intensity of the web interface is increased. However, a saturation point, where there is coexistence between maximum conversion and minimum negative response, can be found.

The findings imply that efforts to attract user attention should be pursued with increased caution and that a gradual approach presented in this study helps in finding a site-specific sweet spot for a level of visual intensity by incrementally adjusting the elements of the interface and tracking the changes in user behaviour.

Web marketing and advertising professionals often face the dilemma of determining the optimal level of visual intensity of interface element. Excessive use of marketing component and attention-grabbing visual elements can lead to an inferior user experience and consequent user churn due to growing intrusiveness. At the same time, too little visual intensity can fail to steer users. The present study provides a gradual approach which aids in finding a balance between user experience and visual intensity, maximising user conversion and, thus, providing a practical solution for the problem.

The objective of this study is to investigate how country risk, different political actions from the government and bureaucratic behavior influence the activities in industry supply chains (SCs) in emerging markets. The main objective of this study is to investigate the influence of these external stakeholders’ elements to the demand-side and supply-side drivers and barriers for improving competitiveness of Ready-Made Garment (RMG) industry in the way of analyzing supply chain. Considering the phenomenon of recent change in the RMG business environment and the competitiveness issues this study uses the principles of stakeholder and resource dependence theory and aims to find out some factors which influence to make an efficient supply chain for improving competitiveness. The RMG industry of Bangladesh is the case application of this study. Following a positivist paradigm, this study adopts a two phase sequential mixed-method research design consisting of qualitative and quantitative approaches. A tentative research model is developed first based on extensive literature review. Qualitative field study is then carried out to fine tune the initial research model. Findings from the qualitative method are also used to develop measures and instruments for the next phase of quantitative method. A survey is carried out with sample of top and middle level executives of different garment companies of Dhaka city in Bangladesh and the collected quantitative data are analyzed by partial least square-based structural equation modeling. The findings support eight hypotheses. From the analysis the external stakeholders’ elements like bureaucratic behavior and country risk have significant influence to the barriers. From the internal stakeholders’ point of view the manufacturers’ and buyers’ drivers have significant influence on the competitiveness. Therefore, stakeholders need to take proper action to reduce the barriers and increase the drivers, as the drivers have positive influence to improve competitiveness.

This study has both theoretical and practical contributions. This study represents an important contribution to the theory by integrating two theoretical perceptions to identify factors of the RMG industry’s SC that affect the competitiveness of the RMG industry. This research study contributes to the understanding of both external and internal stakeholders of national and international perspectives in the RMG (textile and clothing) business. It combines the insights of stakeholder and resource dependence theories along with the concept of the SC in improving effectiveness. In a practical sense, this study certainly contributes to the Bangladeshi RMG industry. In accordance with the desire of the RMG manufacturers, the research has shown that some influential constructs of the RMG industry’s SC affect the competitiveness of the RMG industry. The outcome of the study is useful for various stakeholders of the Bangladeshi RMG industry sector ranging from the government to various private organizations. The applications of this study are extendable through further adaptation in other industries and various geographic contexts.

In this, the second edition, the experience of actually running a marketing planning process in organisations further updates and revises the highly practical emphasis. The need for vision, how to enunciate it, and the interface between various levels of managers are integrated specifically into the process. Further analysis using the SWOT technique is provided together with enhanced insight into maintaining competitive advantage. Essentially a practical manual on running a planning process, the worksheet method has been well tried and tested. The experience of managers who have implemented the process using the first edition is included to enhance the technique′s dynamism and effectiveness.

The purpose of this paper is to establish a maturity evaluation model for the application of construction steel structure welding robotics suitable for the actual situation and specific characteristics of engineering projects in China and then to assess the maturity level of the technology in the application of domestic engineering projects more scientifically.

The research follows a qualitative and quantitative analysis method. In the first stage, the structure of the maturity model is constructed and the evaluation index system is designed by using the ideas of the capability maturity model and WSR methodology for reference. In the second stage, the design of the evaluation process and the selection of evaluation methods (analytic hierarchy process method, multi-level gray comprehensive evaluation method). In the third stage, the data are collected and organized (preparation of questionnaires, distribution of questionnaires, questionnaire collection). In the fourth stage, the established maturity evaluation model is used to analyze the data.

The evaluation model established by using multi-level gray theory can effectively transform various complex indicators into an intuitive maturity level or score status. The conclusion shows that the application maturity of building steel structure welding robot technology in this project is at the development level as a whole. The maturity levels of “WuLi – ShiLi – RenLi” are respectively: development level, development level, between starting level and development level. Comparison of maturity evaluation values of five important factors (from high to low): environmental factors, technical factors, management factors, benefit factors, personnel and group factors.

In this paper, based on the existing research related to construction steel structure welding robot technology, a quantitative and holistic evaluation of the application of construction steel structure welding robot technology in domestic engineering projects is conducted for the first time from a project perspective by designing a maturity evaluation index system and establishing a maturity evaluation model. This research will help the project team to evaluate the application level (maturity) of the welding robot in the actual project, identify the shortcomings and defects of the application of this technology, then improve the weak links pertinently, and finally realize the gradual improvement of the overall application level of welding robot technology for building steel structure.

This paper reports on a study of the efficacy of the Institute of Chartered Accountants of New Zealand's (the Institute) Professional Accounting School (PAS) programme in developing a set of competencies in candidates. The study surveyed Institute candidates' perceptions of their competence levels for 16 specified skills at the commencement and conclusion of the 1999 PAS programme. The findings indicate that candidates perceived their levels of competence, for both cognitive and behavioural skills, to have been significantly improved by the PAS programme. Tests of two secondary hypotheses in the study indicate certain gender‐ and firm‐based differences in the perceived level of competence of candidates. The results of the study provide the Institute with feedback on the PAS programme and facilitate the further development of the programme. Other professional accounting bodies may consider replicating this study using data collected on similar programmes. The results of such studies may then be compared to enhance the existing knowledge of competency development in professional accounting education.

Processes, in practice, may involve more than one quality characteristic that are of interest. It is quite possible for such quality characteristics to not be independent of each other since the magnitude of one of the characteristics may influence the magnitude of the other characteristics. Under this setting, it is of interest to determine the optimal settings of the process parameters (usually the process mean and the process standard deviation of each quality characteristic) under various objectives. Some of the objectives may be conflicting to each other. In general, it may be possible for the decision-maker to prioritize the objectives. Using such a prioritized scheme, it is of interest to determine the optimal settings of the process mean and standard deviation for each quality characteristic that is being monitored. Such solutions could be labeled as “satisficing” solutions. Sensitivity analyses of the decision variables to the chosen objectives and parameter values are also investigated.

This research study aims to introduce a maturity model based on capability maturity model integration (CMMI) that can assess the digital manufacturing maturity level of manufacturing companies.

A CMMI model for the manufacturing industry is designed to assess the digitalisation level of manufacturing industries. The model is developed exclusively for the process area “organisational process focus” (OPF), and the digitalisation level is quantified using fuzzy logic by employing a case study approach.

The CMMI is successfully employed to assess the digitalisation level of a manufacturing organisation using the fuzzy logic approach. The triangular fuzzy number of the Fuzzy CMMI Measure Index (FCMI) is obtained as (6.08, 7.33, 8.52). The transformation of FCMI into linguistic terms discloses the digitalisation level of the manufacturing organisation as “Capability Maturity Level 4” (CML 4).

The authors tested the suitability of CMMI in the manufacturing sector. The operational concept introduced in this research sets forth a unique framework to quantify the digitalisation level of manufacturing industries.

The purpose of this study is to develop a CMMI model for the manufacturing industry and to find an appropriate method to assess the CMMI level. The CMMI level indicates how well the processes are planned, performed, measured and controlled, thus revealing the performance level of an organization.

Among the various process areas of CMMI, “organizational process focus” (OPF) is selected for the study. The CMMI model for the process area OPF is designed based on the CMMI enablers, criteria and attributes. Based on this multilevel model, a case study approach is adopted and fuzzy logic is used to measure the CMMI level of an organization. The fuzzy performance importance index (FPII) and the ranking score are used to further analyze the attributes.

The proposed model has been successfully used to measure the CMMI level of the manufacturing industry in south India. The triangular fuzzy number of the fuzzy CMMI measure index (FCMI) is obtained as (2.077, 3.534, 5.000). The transformation of FCMI back into linguistic terms discloses the current CMMI level of the industry as “Capability Maturity Level 2” (CML 2).

The authors tested the suitability of an inter-disciplinary approach known as CMMI for the process appraisal in the manufacturing sector. The investigation sets forth a unique framework to quantify the performance of practices followed in a manufacturing organization and thereby help the industry to realize the present strength and weakness in terms of process assets.