Search results

Recently, there has been a shift toward the embodied energy assessment of buildings. However, the impact of material service life on the life-cycle embodied energy has received little attention. We aimed to address this knowledge gap, particularly in the context of the UAE and investigated the embodied energy associated with the use of concrete and other materials commonly used in residential buildings in the hot desert climate of the UAE.

Using input–output based hybrid analysis, we quantified the life-cycle embodied energy of a villa in the UAE with over 50 years of building life using the average, minimum, and maximum material service life values. Mathematical calculations were performed using MS Excel, and a detailed bill of quantities with >170 building materials and components of the villa were used for investigation.

For the base case, the initial embodied energy was 57% (7390.5 GJ), whereas the recurrent embodied energy was 43% (5,690 GJ) of the life-cycle embodied energy based on average material service life values. The proportion of the recurrent embodied energy with minimum material service life values was increased to 68% of the life-cycle embodied energy, while it dropped to 15% with maximum material service life values.

The findings provide new data to guide building construction in the UAE and show that recurrent embodied energy contributes significantly to life-cycle energy demand. Further, the study of material service life variations provides deeper insights into future building material specifications and management considerations for building maintenance.

This paper aims to promote the higher quality development of high-tech enterprises in China. While science and technology have greatly promoted human civilization, resources have been excessively consumed and the environment has been sharply polluted. Therefore, it is particularly important for current enterprises to make use of scientific and technological innovation to maximize the benefits of mankind, minimize the loss of nature, and promote the sustainable development of our country.

By using DEA-Banker-Charnes-Cooper (BCC) model and DEA-Malmquist model, this paper comprehensively examines the innovation efficiency of high-tech enterprises from both static and dynamic perspectives, and conducts a provincial comparative study with the panel data of ten representative provinces from 2011 to 2020.

The research findings are as follows: the rapid number increase of high-tech enterprises in most provinces (cities) is accompanied by an ineffective input–output efficiency; the quality of high-tech enterprises needs to comprehensively examine both input–output efficiency and total factor productivity; and there is not a positive correlation between element investment and innovation performance.

Because the DEA model used in this paper assumes that the improvement direction of invalid units is to ensure that the input ratio of various production factors remains unchanged but sometimes the proportion of scientific and technological activities personnel and the total research and development investment is not constant. In the future, the nonradial DEA model can be considered for further research. Due to historical data statistics, more provinces, cities and longer panel data are difficult to obtain. The samples studied in this paper mainly refer to the provinces and cities that ranked first in the number of national high-tech enterprises in 2020. Limited by the number of samples, DEA analysis failed to select more input and output indicators. In the future, with the accumulation of statistical data, the existing efficiency analysis will be further optimized.

Aiming at the misunderstanding of emphasizing quantity and neglecting quality in the cultivation of high-tech enterprises, this paper comprehensively uses DEA-BCC model and DEA Malmquist index decomposition method to make a comprehensive comparative study on the development of high-tech enterprises in ten representative provinces (cities) from two aspects of static efficiency evaluation and dynamic efficiency evaluation.

The concept of productivity is central to performance management and decision-making, although it is complex and multifaceted. This paper aims to describe a methodology based on the use of Big Data in a cluster analysis combined with a data envelopment analysis (DEA) that provides accurate and reliable productivity measures in a large network of retailers.

The methodology is described using a case study of a leading kitchen furniture producer. More specifically, Big Data is used in a two-step analysis prior to the DEA to automatically cluster a large number of retailers into groups that are homogeneous in terms of structural and environmental factors and assess a within-the-group level of productivity of the retailers.

The proposed methodology helps reduce the heterogeneity among the units analysed, which is a major concern in DEA applications. The data-driven factorial and clustering technique allows for maximum within-group homogeneity and between-group heterogeneity by reducing subjective bias and dimensionality, which is embedded with the use of Big Data.

The use of Big Data in clustering applied to productivity analysis can provide managers with data-driven information about the structural and socio-economic characteristics of retailers' catchment areas, which is important in establishing potential productivity performance and optimizing resource allocation. The improved productivity indexes enable the setting of targets that are coherent with retailers' potential, which increases motivation and commitment.

This article proposes an innovative technique to enhance the accuracy of productivity measures through the use of Big Data clustering and DEA. To the best of the authors’ knowledge, no attempts have been made to benefit from the use of Big Data in the literature on retail store productivity.

This paper aims to define the efficiency achieved by urban transport companies in Spain concerning the resources they use, considering the type of management used for implementation, public-private, and size.

This study consisted of an analysis of the efficiency of 229 public-private urban transport operators during the period 2012–2021 using Data Envelopment Analysis, the Malmquist Index and inference estimators to determine productivity, efficiency change into Pure Technical Efficiency Change (PTECH), and scale efficiency change.

Based on the efficiency analysis, the authors concluded that of the 229 companies studied, more than 35 were inefficient in all analysed periods. Considering the sample used, direct management is considered significantly more efficient. It cannot be concluded that the size of these companies influences their efficiency, as the data show unequal development behaviours in the studied years.

This study provides arguments on whether there is a significant difference between the two types of management in the urban transport sector. It also includes firm size as a study variable, which has not been previously considered in other studies related to urban transport efficiency. Efficiency should be a crucial factor in determining funding allocation in this sector, as it encourages operators to optimize and improve their services.

The paper aims at addressing the following research questions: does institutional quality improve countries' environmental efficiency? And which pillars of institutional quality improve countries' environmental efficiency?

By specifying a directional distance function in the context of stochastic frontier method where GHG emissions are considered as the bad output and the GDP is referred as the desirable one, the work computes the environmental efficiency into the appraisal of a production function for the European countries over three decades.

According to the countries' performance, the findings confirm that high and upper middle-income countries have higher environmental efficiency compared to low middle-income countries. In this environmental context, the role of institutional quality turns out to be really important in improving the environmental efficiency for high income countries.

This article attempts to analyze the role of different dimensions of institutional quality in different European countries' performance – in terms of mitigating GHGs (undesirable output) – while trying to raise their economic performance through their GDP (desirable output).

1. The paper aims at addressing the following research question: does institutional quality improve countries' environmental efficiency?

2. We adopt a directional distance function in the context of stochastic frontier method, considering 40 European economies over a 30-year time interval.

3. The findings confirm that high and upper middle-income countries have higher environmental efficiency compared to low middle-income countries.

4. The role of institutional quality turns out to be really important in improving the environmental efficiency for high income countries, while the performance decreases for the low middle-income countries.

The paper aims at addressing the following research question: does institutional quality improve countries' environmental efficiency?

We adopt a directional distance function in the context of stochastic frontier method, considering 40 European economies over a 30-year time interval.

The findings confirm that high and upper middle-income countries have higher environmental efficiency compared to low middle-income countries.

The role of institutional quality turns out to be really important in improving the environmental efficiency for high income countries, while the performance decreases for the low middle-income countries.

This study aims to assess the efficiency of Brazil, Russia, India, China, South Africa (BRICS) countries in achieving sustainable development by analyzing their ability to convert resources and technological innovations into sustainable outcomes.

Using data envelopment analysis (DEA), the study evaluates the economic, environmental and social efficiency of BRICS countries over the period 2010–2018. It ranks these countries based on their sustainable development performance and compares them to the period 2000–2007.

The study reveals varied efficiency levels among BRICS countries. Russia and South Africa lead in certain sustainable development aspects. South Africa excels in environmental sustainability, whereas Brazil is efficient in resource utilization for sustainable growth. China and India, despite economic growth, face challenges such as pollution and lower quality of life.

The study’s findings are constrained by the DEA methodology and the selection of variables. It highlights the need for more nuanced research incorporating recent global events such as the COVID-19 pandemic and geopolitical shifts.

Insights from this study can inform targeted and effective sustainability strategies in BRICS nations, focusing on areas such as industrial quality improvement, employment conditions and environmental policies.

The study underscores the importance of balancing economic growth with social and environmental considerations, highlighting the need for policies addressing inequality, poverty and environmental degradation.

This research provides a unique comparative analysis of BRICS countries’ sustainable development efficiency, challenging conventional perceptions and offering a new perspective on their progress.

Prior research has emphasised the importance of the early phases of construction projects, as well as the difficulties of procuring engineering services – especially due to the uncertainties. Despite that, studies on the public procurement of engineering services are scarce. Although scholars have shown that uncertainty may affect the choice of control modes, the level of uncertainty that characterises services is not addressed by the two task characteristics: knowledge of the transformation process and output measurability. The purpose is to investigate organisational control in public procurement of engineering services.

The existing control model was adjusted in this study by conceptually adding uncertainty as a third aspect to the two task characteristics. A single case study of the Swedish Transport Administration was used. The empirical data, comprising 14 interviews with managers from the client and engineering consulting companies, were analysed using flexible pattern matching and visual mapping approaches and then illustrated using the model.

The public client did not base its choice of control modes on uncertainty, but rather on the other two task characteristics. Consequently, the service providers argued that the chosen control modes reduced their creativity, increased their financial risks and caused unclear responsibilities. This study therefore shows that uncertainty is an important factor to consider in the choice of control modes, both from a theoretical perspective and from the service providers' point of view. The developed model may therefore be useful for researchers as well as practitioners.

This study is the first attempt to add uncertainty as a task characteristic when choosing control modes. The results contribute to the scarce control literature regarding the procurement of engineering services for construction projects and the procurement of other services with high uncertainty.

Sarcasm is a linguistic expression that usually carries the opposite meaning of what is being said by words, thus making it difficult for machines to discover the actual meaning. It is mainly distinguished by the inflection with which it is spoken, with an undercurrent of irony, and is largely dependent on context, which makes it a difficult task for computational analysis. Moreover, sarcasm expresses negative sentiments using positive words, allowing it to easily confuse sentiment analysis models. This paper aims to demonstrate the task of sarcasm detection using the approach of machine and deep learning.

For the purpose of sarcasm detection, machine and deep learning models were used on a data set consisting of 1.3 million social media comments, including both sarcastic and non-sarcastic comments. The data set was pre-processed using natural language processing methods, and additional features were extracted and analysed. Several machine learning models, including logistic regression, ridge regression, linear support vector and support vector machines, along with two deep learning models based on bidirectional long short-term memory and one bidirectional encoder representations from transformers (BERT)-based model, were implemented, evaluated and compared.

The performance of machine and deep learning models was compared in the task of sarcasm detection, and possible ways of improvement were discussed. Deep learning models showed more promise, performance-wise, for this type of task. Specifically, a state-of-the-art model in natural language processing, namely, BERT-based model, outperformed other machine and deep learning models.

This study compared the performance of the various machine and deep learning models in the task of sarcasm detection using the data set of 1.3 million comments from social media.

This paper aims to determine the impact of perceived virtuality on team dynamics and outcomes by adopting the Input-Mediators-Outcome (IMO) framework. Further, it also investigates the mediating role of team processes and emergent states.

The authors collected survey data from 315 individuals working in virtual teams (VTs) in the information technology sector in India using both offline and online questionnaires. They performed the analysis using Partial Least Squares Structural Equation Modelling (PLS-SEM).

The authors investigated two sets of hypotheses – both direct and indirect (or mediation interactions). Results show that psychological empowerment and conflict management are significant in managing VTs. Also, perceived virtuality impacts team outcomes, i.e. perceived team performance, team satisfaction and subjective well-being.

The interplay between the behavioural team process (conflict management) and the emergent state (psychological empowerment) was examined. The study also helps broaden our understanding of the various psychological variables associated with teamwork in the context of VTs.

Findings from this study will aid in assessing the consequences of virtual teamwork at both individual and organisational levels, such as guiding the design and sustainability of VT arrangements, achieving higher productivity in VTs, and designing effective and interactive solutions in the virtual space.

The study examined the interplay between behavioural team processes (such as conflict management) and emergent states (such as psychological empowerment). The study also theorises and empirically tests the relationships between perceived virtuality and team outcomes (i.e. both affective and effectiveness). It may serve as a guide to understanding team dynamics in VTs better.

This exploratory study attempts to enhance the current understanding of the research and practice of VTs within a developing economy.

The variance between the winning bid and the owner's estimated cost (OEC) is one of the construction management risks in the pre-tendering phase. The study aims to enhance the quality of the owner's estimation for predicting precisely the contract cost at the pre-tendering phase and avoiding future issues that arise through the construction phase.

This paper integrated artificial neural networks (ANN), deep neural networks (DNN) and time series (TS) techniques to estimate the ratio of a low bid to the OEC (R) for different size contracts and three types of contracts (building, electric and mechanic) accurately based on 94 contracts from King Saud University. The ANN and DNN models were evaluated using mean absolute percentage error (MAPE), mean sum square error (MSSE) and root mean sums square error (RMSSE).

The main finding is that the ANN provides high accuracy with MAPE, MSSE and RMSSE a 2.94%, 0.0015 and 0.039, respectively. The DNN's precision was high, with an RMSSE of 0.15 on average.

The owner and consultant are expected to use the study's findings to create more accuracy of the owner's estimate and decrease the difference between the owner's estimate and the lowest submitted offer for better decision-making.

This study fills the knowledge gap by developing an ANN model to handle missing TS data and forecasting the difference between a low bid and an OEC at the pre-tendering phase.