Search results

Metal-cooled reactors generally use molten metals such as sodium, potassium or a combination of sodium and potassium because of their excellent heat transfer properties so that the reactor can operate at much lower pressures and higher temperatures. The purpose of this paper is to investigate the stability of natural convection in an inclined ring filled with molten potassium under the influence of a radial magnetism.

A numerical simulation of electrically conductive fluid natural convection stability is performed on an inclined cylindrical annulus under the influence of a radial magnetism. The upper and lower walls are adiabatic, while the internal and external cylinders are kept at even temperatures. The equations governing this fluid system are solved numerically using finite volume method. The SIMPLER algorithm is used for pressure-speed coupling in the momentum equation.

Numerical results for various effective parameters that solve the problem in the initial oscillatory state are discussed in terms of isobars, isotherms and flow lines in the annulus for a wide range of Hartmann numbers (0 ≤ Ha ≤ 80), inclination angles (0 ≤ γ ≤ 90°) and radii ratios λ ≤ 6. The dependency stability diagrams between complicated situations with the critical value of the Rayleigh number RaCr and the corresponding frequency FrCr are established on the basis of the numeric data of this investigation. The angle of inclination and the radii ratio of the annulus have a significant effect on the stabilization of the magneto-convective flux and show that the best stabilization of the natural oscillatory convection is obtained by the intensity of the strongest magnetic field, the high radii ratio and inclination of the annulus at γ = 30°.

This numerical model is selected for its various applications in technology and industry.

To the best of the authors’ knowledge, the influence of the inclination of the cylindrical annulus (ring), with various radii ratio, on natural oscillatory convection under a radial magnetism has never been investigated.

One of the major challenges in the design of thermal equipment is to minimize the entropy production and enhance the thermal dissipation rate for improving energy efficiency of the devices. In several industrial applications, the structure of thermal device is cylindrical shape. In this regard, this paper aims to explore the impact of isothermal cylindrical solid block on nanofluid (Ag – H₂O) convective flow and entropy generation in a cylindrical annular chamber subjected to different thermal conditions. Furthermore, the present study also addresses the structural impact of cylindrical solid block placed at the center of annular domain.

The alternating direction implicit and successive over relaxation techniques are used in the current investigation to solve the coupled partial differential equations. Furthermore, estimation of average Nusselt number and total entropy generation involves integration and is achieved by Simpson and Trapezoidal’s rules, respectively. Mesh independence checks have been carried out to ensure the accuracy of numerical results.

Computations have been performed to analyze the simultaneous multiple influences, such as different thermal conditions, size and aspect ratio of the hot obstacle, Rayleigh number and nanoparticle shape on buoyancy-driven nanoliquid movement, heat dissipation, irreversibility distribution, cup-mixing temperature and performance evaluation criteria in an annular chamber. The computational results reveal that the nanoparticle shape and obstacle size produce conducive situation for increasing system’s thermal efficiency. Furthermore, utilization of nonspherical shaped nanoparticles enhances the heat transfer rate with minimum entropy generation in the enclosure. Also, greater performance evaluation criteria has been noticed for larger obstacle for both uniform and nonuniform heating.

The current numerical investigation can be extended to further explore the thermal performance with different positions of solid obstacle, inclination angles, by applying Lorentz force, internal heat generation and so on numerically or experimentally.

A pioneering numerical investigation on the structural influence of hot solid block on the convective nanofluid flow, energy transport and entropy production in an annular space has been analyzed. The results in the present study are novel, related to various modern industrial applications. These results could be used as a firsthand information for the design engineers to obtain highly efficient thermal systems.

The effect of the tube wall heat conduction on the natural convection in a tilted long cylindrical envelope with constant, but different temperature of the two ends and an adiabatic outer surface was numerically investigated. The envelope is supposed to be a simplified model for the pulse tube in a pulse tube refrigerator when the pulse tube is positioned at different orientations. It is found that the cylindrical envelope lateral wall heat conduction can enhance the heat transfer from the hot end to the cold end, not only because of the increase in pure heat conduction in the wall, but more importantly, also the intensification of the natural convection within the enclosure. This enhancement is resulted from the big temperature difference between the tube wall and the adjacent fluid near the hot and cold ends. Adoption of low thermal conductivity tube can effectively reduce such additional heat transfers from hot to cold end, thus reducing the loss of cooling capacity for the pulse tube refrigerator.

Natural convection in finite enclosures is a common phenomenon in various thermal applications. To provide the thermal design guidelines, this study aims to numerically explore the potential of using internal baffles and nanofluids to either enhance or suppress heat transport in a vertical annulus. Furthermore, the annular-shaped enclosure is filled with aqueous-silver nanofluid and the effects of five distinct nanoparticle shapes are examined. In addition, the influence of baffle design parameters, including baffle position, thickness and length, is thoroughly analyzed.

The finite difference method is used in conjunction with the alternating direction implicit and successive line over relaxation techniques to solve nonlinear and coupled partial differential equations. The single phase model is used for nanofluid which is considered as a homogeneous fluid with improved thermal properties. The independence tests are carried out for assessing the sufficiency of grid size and time step for obtaining results accurately.

The baffle dimension parameters and nanoparticle shape exhibit significant impact on the convective flow and heat transfer characteristics, leading to the following results: sphere- and blade-shaped nanoparticles demonstrate around 30% enhancement in the heat transport capability compared with platelet-shaped nanoparticles, which exhibit the least. When considering the baffle design parameter, either a decrease in the baffle length and thickness or an increase in baffle height leads to an improvement in heat transport rate. Consequently, a threefold increase in baffle height yields a 40% improvement in thermal performance.

Understanding the impact of nanoparticle shapes and baffle design parameters on flow and thermal behavior will enable engineers to provide valuable insight on thermal management and overall system efficiency. Therefore, the current work focuses on exploring buoyant nanofluid flow and thermal mechanism in a baffled annular-shaped enclosure. Specifically, an internal baffle that exhibits conductive heat transfer through it is considered, and the impact of baffle dimensions (thickness, length and position) on the fluid flow behavior and thermal characteristics is investigated. In addition, the current study also addresses the influence of five distinct nanoparticle shapes (e.g. spherical, cylindrical, platelet, blade and brick) on the flow and thermal behavior in the baffled annular geometry. In addition to deepening the understanding of nanofluid behavior in a baffled vertical annulus, the current study contributes to the ongoing advancements in thermal applications by providing certain guidelines to design application-specific enclosures.

The purpose of this paper is to study the flow, heat and mass transfer of MHD Casson nanofluid due to an inclined stretching sheet using similarity transformation, the governing PDE’S equations of flow, heat and mass transfer are converted into ODE’S. The resulting non-linear ODE’S are solved numerically using an implicit finite difference method, which is known as Kellor-box method. The effects of various governing parameters on velocity, temperature and concentration are plotted for both Newtonian and non-Newtonian cases. The numerical values of skin friction, Nusselt number and Sherwood number are calculated and tabulated in various tables for different values of physical parameters. It is noticed that the effect of angle of inclination enhances the temperature and concentration profile whereas velocity decreases. The temperature decreases due to the increase in the parametric values of Pr and Gr due to thickening in the boundary layer.

Numerical method is applied to find the results.

Flow and heat transfer analysis w.r.t various flow and temperature are analyzed for different values of the physical parameters.

The numerical values of skin friction, Nusselt number and Sherwood number are calculated and tabulated in various tables for different values of physical parameters.

The study of the boundary layer flow, heat and mass transfer is important due to its applications in industries and many manufacturing processes such as aerodynamic extrusion of plastic sheets and cooling of metallic sheets in a cooling bath.

Here in this paper the authors have investigated the MHD boundary layer flow of a Casson nanofluid over an inclined stretching sheet along with the Newtonian nanofluid as a limited.

The purpose of this paper is to investigate the effects of Ha and the Nanoparticles (NP) volume fraction over the irreversibility and heat transport in Darcy–Forchheimer nanofluid saturated lid-driven porous medium.

The present paper highlights entropy generation because of mixed convection for a lid-driven porous enclosure filled through a nanoliquid and submitted to a uniform magnetic field. The analysis is achieved using Darcy–Brinkman–Forchheimer technique. The set of partial differential equations governing the considered system was numerically solved using the finite element method.

The main observations are as follows. The results indicate that the movement of horizontal wall is an important factor for the entropy generation inside the porous cavity filled through Cu–water nanoliquid. The variation of the thermal entropy generation is linear through NPs volume fraction. The total entropy generation reduces when the Darcy, Hartmann and the nanoparticle volume fraction increase. The porous media and magnetic field effects reduce the total entropy generation.

Interest in studying thermal interactions by convective flow within a saturating porous medium has many fundamental considerations and has received extensive consideration in the literature because of its usefulness in a large variety of engineering applications, such as the energy storage and solar collectors, crystal growth, food processing, nuclear reactors and cooling of electronic devices, etc.

By examining the literature, the authors found that little attention has been paid to entropy generation encountered during convection of nanofluids. Hence, this work aims to numerically study entropy generation and heat transport in a lid-driven porous enclosure filled with a nanoliquid.

The main purpose of this paper is to define 2D numerical study and a sensitivity analysis of natural convection heat transfer and entropy generation of Al₂O₃-water nanofluid in a trapezoidal cavity, with considering of the presence of a constant axial magnetic field.

The effects of the three effective parameters, the Rayleigh number, Hartmann number (Ha) and also inclination angle on the heat transfer performance and entropy generation, are investigated using a finite volume approach. The sensitivity analysis of the effective parameters is done utilizing the response surface methodology.

The results obtained showed that the mean Nusselt number and total entropy generation increase with the Rayleigh number. Also, increasing the inclination angle reduces the mean Nusselt number (regardless of the magnetic field). In addition, it is found that the mean Nusselt number increases until Ha = 10 and then decreases by increasing of Ha number, regardless of the inclination angle. The sensitivity of the mean Nusselt number to the Ha number and inclination angle α is negative. It is concluded that to maximize the mean Nusselt number and minimize the entropy generation, simultaneously, the Ha and inclination angle must be 50° and 0°, respectively.

There is no published research in the literature about sensitivity analysis of magneto-hydrodynamic heat transfer and entropy generation in inclined trapezoidal cavity filled with nanofluid.

The purpose of this paper is to evaluate the temperature, the Dirichlet conditions have been considered to the parallel horizontal plates. The model of generalized Brinkman-extended Darcy with the Boussinesq approximation is considered and the governing equations are computed by COMSOL multiphysics.

In the current study, the thermodynamic irreversible principle is applied to study the unsteady Poiseuille–Rayleigh–Bénard (PRB) mixed convection in a channel (aspect ratio A = 5), with the effect of a uniform transverse magnetic field.

The effects of various flow parameters on the fluid flow, Hartmann number (Ha), Darcy number (Da), Brinkman number (Br) and porosity (ε), are presented graphically and discussed. Numerical results for temperature and velocity profiles, entropy generation variations and contour maps of streamlines, are presented as functions of the governing parameter mentioned above. Basing on the generalized Brinkman-extended Darcy formulation, which allows the satisfaction of the no-slip boundary condition on a solid wall, it is found that the flow field and then entropy generation is notably influenced by the considering control parameters. The results demonstrate that the flow tends toward the steady-state with four various regimes, which strongly depends on the Hartman and Darcy numbers variations. Local thermodynamic irreversibilities are more confined near the active top and bottom horizontal walls of the channel when increasing the Da and decreasing the Hartmann number. Entropy generation is also found to be considerably affected by Brinkman number variation.

In the present work, we are presenting our investigations on the influence of a transverse applied external magnetohydrodynamic on entropy generation at the unsteady laminar PRB flow of an incompressible, Newtonian, viscous electrically conducting binary gas mixture fluid in porous channel of two horizontal heated plates. The numerical solutions for the liquid velocity, the temperature distribution and the rates of heat transport and entropy generation are obtained and are plotted graphically.

This study aims to numerically study the buoyant convective flow of two different nanofluids in a porous annular domain. A uniformly heated inner cylinder, cooled outer cylindrical boundary and adiabatic horizontal surfaces are considered because of many industrial applications of this geometry. The analysis also addresses the comparative study of different porous media models governing fluid flow and heat transport.

The finite difference method has been used in the current simulation work to obtain the numerical solution of coupled partial differential equations. In particular, the alternating direction implicit method is used for solving transient equations, and the successive line over relaxation iterative method is used to solve time-independent equation by choosing an optimum value for relaxation parameter. Simpson’s rule is adopted to estimate average Nusselt number involving numerical integration. Various grid sensitivity checks have been performed to assess the sufficiency of grid size to obtain accurate results. In this analysis, a general porous media model has been considered, and a comparative study between three different models has been investigated.

Numerical simulations are performed for different combinations of the control parameters and interesting results are obtained. It has been found that the an increase in Darcy and Rayleigh numbers enhances the thermal transport rate and strengthens the nanofluid movement in porous annulus. Also, higher flow circulation rate and thermal transport has been detected for Darcy model as compared to non-Darcy models. Thermal mixing could be enhanced by considering a non-Darcy model.

The present results could be effectively used in many practical applications under the limiting conditions of two-dimensionality and axi-symmetry conditions. The only drawback of the current study is it does not include the three-dimensional effects.

The results could be used as a first-hand information for the design of any thermal systems. This will help the design engineer to have fewer trial-and-run cases for the new design.

A pioneering numerical investigation on the buoyant convective flow of two different nanofluids in an annular porous domain has been carried out by using a general Darcy–Brinkman–Forchheimer model to govern fluid flow in porous matrix. The results obtained from current investigation are novel and original, with numerous practical applications of nanofluid saturated porous annular enclosure in the modern industry.

The aim is to study the effects of fin conductivity ratio, Darcy number, and Rayleigh number on the average Nusselt number for fins made of porous material when attached to the inner cylinder of the annulus between two concentric cylinders. The paper also aims to compare the results with those obtained using solid fins over a range of Rayleigh numbers.

The Darcy‐Brinkman equations were used to model the fluid flow inside the porous media and the Boussinesq approximation was used to model the buoyancy effect. The energy equation is also solved to find the temperature distribution in the domain of interest. The model equations are solved numerically using a finite volume code.

Porous fins provided higher heat transfer rates than solid fins for similar configurations. This enhancement in heat transfer reached 75 per cent at Ra=5 × 10⁴ and Da=2.5 × 10⁻². It is also found that unlike solid fins the rate of heat transfer from the cylinder equipped with porous fins decreases with increasing the fin inclination angle.

The range of the Rayleigh number considered in this research covers only the laminar regime. The research does not cover turbulent flows. In addition to that, the local thermal equilibrium assumption is used.

This work can help designers in selecting the proper material properties and operating conditions in designing porous fins to enhance the heat transfer in the annulus between two horizontal concentric cylinders under natural convection condition.

This work has not been done before and it can initiate additional research projects as looking at the performance of porous fins under other conditions and configurations (e.g. turbulent conditions).