Search results

Simulations exist for the prediction of the behaviour of building structural systems under fire, including two-way coupled fire-structure interaction. However, these simulations do not include detailed models of the connections, whereas these connections may impact the overall behaviour of the structure. Therefore, this paper proposes a two-scale method to include screw connections.

The two-scale method consists of (a) a global-scale model that models the overall structural system and (b) a small-scale model to describe a screw connection. Components in the global-scale model are connected by a spring element instead of a modelled screw, and the stiffness of this spring element is predicted by the small-scale model, updated at each load step. For computational efficiency, the small-scale model uses a proprietary technique to model the behaviour of the threads, verified by simulations that model the complete thread geometry, and validated by existing pull-out experiments. For four screw failure modes, load-deformation behaviour and failure predictions of the two-scale method are verified by a detailed system model. Additionally, the two-scale method is validated for a combined load case by existing experiments, and demonstrated for different temperatures. Finally, the two-scale method is illustrated as part of a two-way coupled fire-structure simulation.

It was shown that proprietary ”threaded connection interaction” can predict thread relevant failure modes, i.e. thread failure, shank tension failure, and pull-out. For bearing, shear, tension, and pull-out failure, load-deformation behaviour and failure predictions of the two-scale method correspond with the detailed system model and Eurocode predictions. Related to combined load cases, for a variety of experiments a good correlation has been found between experimental and simulation results, however, pull-out simulations were shown to be inconsistent.

More research is needed before the two-scale method can be used under all conditions. This relates to the failure criteria for pull-out, combined load cases, and temperature loads.

The two-scale method bridges the existing very detailed small-scale screw models with present global-scale structural models, that in the best case only use springs. It shows to be insightful, for it contains a functional separation of scales, revealing their relationships, and it is computationally efficient as it allows for distributed computing. Furthermore, local small-scale non-convergence (e.g. a screw failing) can be handled without convergence problems in the global-scale structural model.

This study aims to provide a comprehensive review of electric tugboat deployment in maritime transportation, including an in-depth assessment of its advantages and disadvantages. Along with the identification of advantages and disadvantages of electric tugboat deployment, the present research also aims to provide managerial insights into the economic viability of different tugboat alternatives that can guide future investments in the following years.

A detailed literature review was conducted, aiming to gain broad insights into tugboat operations and focusing on different aspects, including tugboat accidents and safety issues, scheduling and berthing of tugboats, life cycle assessment of diesel tugboats and their alternatives, operations of electric and hybrid tugboats, environmental impacts and others. Moreover, a set of interviews was conducted with the leading experts in the electric tugboat industry, including DAMEN Shipyards and the Port of Auckland. Econometric analyses were performed as well to evaluate the financial viability and economic performance of electric tugboats and their alternatives (i.e. conventional tugboats and hybrid tugboats).

The advantages of electric tugboats encompass decreased emissions, reduced operating expenses, improved energy efficiency, lower noise levels and potential for digital transformation through automation and data analytics. However, high initial costs, infrastructure limitations, training requirements and restricted range need to be addressed. The electric tugboat alternative seems to be the best option for scenarios with low interest rate values as increasing interest values negatively impact the salvage value of electric tugboats. It is expected that for long-term planning, the electric and hybrid tugboat alternatives will become preferential since they have lower annual costs than conventional diesel tugboats.

The outcomes of this research provide managerial insights into the practical deployment of electric tugboats and point to future research needs, including battery improvements, cost reduction, infrastructure development, legislative and regulatory changes and alternative energy sources. The advancement of battery technology has the potential to significantly impact the cost dynamics associated with electric tugboats. It is essential to do further research to monitor the advancements in battery technology and analyze their corresponding financial ramifications. It is essential to closely monitor the industry’s shift toward electric tugboats as their prices become more affordable.

The maritime industry is rapidly transforming and facing pressing challenges related to sustainability and digitization. Electric tugboats represent a promising and innovative solution that could address some of these challenges through zero-emission operations, enhanced energy efficiency and integration of digital technologies. Considering the potential of electric tugboats, the present study provides a comprehensive review of the advantages and disadvantages of electric tugboats in maritime transportation, extensive evaluation of the relevant literature, interviews with industry experts and supporting econometric analyses. The outcomes of this research will benefit governmental agencies, policymakers and other relevant maritime transportation stakeholders.

Thermomechanical behavior of intermediate-size beam-to-wall assemblies including Glulam-beams connected to cross-laminated timber (CLT) walls with T-shape steel doweled connections was investigated at ambient temperature (AT) and after and during non-standard fire exposure.

Three AT tests were conducted to evaluate the load-carrying capacity and failure modes of the assembly at room temperature. Two post-fire performance (PFP) tests were performed to study the impact of 30-min (PFP30) and 60-min (PFP60) partial exposure to a non-standard fire on the residual strength of the assemblies. The assemblies were exposed to fire in a custom-designed frame, then cooled and loaded to failure. A fire performance (FP) test was conducted to study the fire resistance (FR) during non-standard fire exposure by simultaneously applying fire and a mechanical load equal to 65% of the AT load carrying capacity.

At AT, embedment failure of the dowels followed by splitting failure at the Glulam-beam and tensile failure of the epoxy between the layers of CLT-walls were the dominant failure modes. In both PFP tests, the plastic bending of the dowels was the only observed failure mode. The residual strength of the assembly was reduced 14% after 30 min and 37% after 60 min of fire exposure. During the FP test, embedment failure of timber in contact with the dowels was the only major failure mode, with the maximum rate of displacement at 51 min into the fire exposure.

This is the first time that the thermomechanical performance of such an assembly with a full-contact connection is presented.

The purpose of this paper is to present the properties of thick-film resistors made of novel pastes prepared from glass and graphite.

Graphite-based resistors were made of thick-film pastes with different graphite-to-glass mass fraction were prepared and examined. Sheet resistance, temperature coefficient of resistance, impact of humidity and short-term overload were investigated. The properties of the layers fired in atmospheres of air at 550°C and nitrogen at 875°C were compared.

Graphite-based resistors with various graphite-to-glass ratios made possible to obtain a wide range of sheet resistance from single O/square to few kO/square. These values were dependent on firing atmosphere, paste composition and the number of screen-printed layers. The samples made of paste with 1:1 graphite-to-glass ratio exhibited the temperature coefficient of resistance of about −1,000 ppm/°C, almost independently on the firing atmosphere and presence of a top coating. The resistors fired in the air after coating with overglaze, exhibited significantly lower sheet resistance, reduced impact of humidity and improved power capabilities.

In this paper, graphite-based resistors for applications in typical high-temperature cermet thick-film circuits were presented, whereas typical graphite-based resistors were fabricated in polymer thick-film technology. Owing to very low cost of the graphite, the material is suitable for low-power passive circuits, where components are not subjected into high temperature, above the typical temperature of operation of standard electronic components.

A significant number of studies have been conducted to analyze and understand the relationship between gas emissions and global temperature using conventional statistical approaches. However, these techniques follow assumptions of probabilistic modeling, where results can be associated with large errors. Furthermore, such traditional techniques cannot be applied to imprecise data. The purpose of this paper is to avoid strict assumptions when studying the complex relationships between variables by using the three innovative, up-to-date, statistical modeling tools: adaptive neuro-fuzzy inference systems (ANFIS), artificial neural networks (ANNs) and fuzzy time series models.

These three approaches enabled us to effectively represent the relationship between global carbon dioxide (CO₂) emissions from the energy sector (oil, gas and coal) and the average global temperature increase. Temperature was used in this study (1900-2012). Investigations were conducted into the predictive power and performance of different fuzzy techniques against conventional methods and among the fuzzy techniques themselves.

A performance comparison of the ANFIS model against conventional techniques showed that the root means square error (RMSE) of ANFIS and conventional techniques were found to be 0.1157 and 0.1915, respectively. On the other hand, the correlation coefficients of ANN and the conventional technique were computed to be 0.93 and 0.69, respectively. Furthermore, the fuzzy-based time series analysis of CO₂ emissions and average global temperature using three fuzzy time series modeling techniques (Singh, Abbasov–Mamedova and NFTS) showed that the RMSE of fuzzy and conventional time series models were 110.51 and 1237.10, respectively.

The paper provides more awareness about fuzzy techniques application in CO₂ emissions studies.

These techniques can be extended to other models to assess the impact of CO₂ emission from other sectors.

New Space activities offer benefits for human progress and life beyond the Earth. However, there is a risk that the New Space Economy may develop according to an anthropocentric mindset favouring human progress and survival at the expense of all other species and the environment. This mindset raises concerns over the social and environmental impacts of space activities and the accountability of space actors. This research article explores the accountability of space actors by presenting a pluralistic accountability framework to understand, inspire and change accountability in the New Space Economy. This study also identifies future research opportunities.

This paper is a reflective and normative essay. The arguments are developed using contemporary multidisciplinary academic literature, publicly available evidence and examples. Further, the authors use Dillard and Vinnari's accountability framework to examine a pluralistic accountability system for space businesses.

The New Space Economy requires public and private entities to embrace hybrid and pluralistic accountability for their social and environmental impacts. A new way of seeing the relationship between human life, the Earth and celestial space is needed. Accounting language is used to mirror and mobilise broader forms of responsibility in those involved in space.

This paper responds to the AAAJ's special issue call for examining how accountability can be ensured in the New Space Age. The space activities businesses conduct, and the anthropocentric view inspiring their race toward space is concerning. Hence, the authors advocate the need for rethinking accountability between humans and nature. The paper contributes to fostering the debate on social and environmental accounting and the accountability of space actors in the New Space Economy. To this end, the authors use a pluralistic accountability framework to help understand how the New Space Economy can face the risks emanating from its anthropocentric mindset.

Interior workspace environments use exclusively artificial light, resulting in a loss of biological connection and natural light quality, as well as greater energy consumption. The purpose of the study is to identify a suitable system that can provide natural light to such interior spaces throughout the day while supplementing it with artificial light when necessary. The fundamental aim is to provide insights into the most effective solutions for energy-efficient lighting design in the UAE's environment, with the potential to lower energy consumption related to interior lighting.

The study adopted an empirical approach to gather and analyze primary data based on field measurements to understand and assess existing lighting conditions, as well as DIALux lighting simulation software to test the efficacy of the proposed HLS in terms of natural light delivery, illumination quality and energy consumption. A branch of a local bank in the United Arab Emirates, situated inside one of the shopping malls where there is no natural light penetration, has been chosen as a case study.

The findings of comparing the base case to four probable scenarios that used HLS revealed that the third scenario, which uses 100% pure sunshine and 35% artificial LED light during daylight operations and 100% LED light during night duty, is considered to be optimal in terms of illumination quality and energy efficiency.

The study demonstrated the potential of innovative lighting to improve the visual working environment in interior spaces with limited access to direct natural lighting, especially in arid regions, where sunlight is plentiful throughout the year. The study contributes new insights into the establishment of lighting-related recommendations and standards for the UAE context. This may include advice for sustainable construction practices, lighting guidelines or incentives to encourage the use of hybrid lighting technology in commercial and institutional buildings.