Search results

One of the low-cost minerals that can be used as reinforcing filler in polymer industry is pumice powder. Pumice is a highly porous volcanic glass formed during explosive eruptions. This pumice has received significant interest because of its large surface area with various polar groups and can be processed easily.

This study is carried out to investigate the effect of partial replacement of silica (as traditional filler) by naturally occurring pumice powder to improve the thermal and mechanical properties of nitrile butadiene rubber cured with electron beam radiation (doses from 25 to 150 kGy).

The results indicated that the addition of pumice powder increase the tensile strength at lower doses up to 75 kGy (especially at concentration of 5 phr). Besides, an improvement in the thermal stability was attained with the addition of pumice powder.

Pumice powder is volcanic-based alumina and silica which is mainly composed of SiO₂. It has porous structure which is formed by dissolved gases precipitated during the cooling as the lava hurtles through air. Due to its porous structure, it has low density and high thermal insulation. It also has high temperature and chemical resistance, for these reasons it became preferable material to be used as filler in the plastic and rubber industry.

The purpose of the study was to discover whether incorporating flours with high nutritive value along with pre-treatment of cereals with nixtamalization and sprouting of legumes would result in a high-quality healthy alternative for corn-based snacks.

Flours of nixtamalized cereals-corn, wheat, rice and sorghum and sprouted legumes-soybean and green gram are made into dough and baked instead of fried to form multi-grain chips. The particle size and physical properties of flour and nutritional, functional and textural properties of dough and chips are tested to study the effect of combination of nixtamalization of cereals and sprouting of legumes in the development of chips.

Baked multi-grain chips made of nixtamalized cereals and sprouted legumes had a significantly (p < 0.05) smaller particle size of 24.6 µm compared to T1 24.8 µm, C1 29.3 µm and C2 31.7 µm. T2 and C2 had significantly (p = 0.05) lower OAC value than C1 and T1 due to nixtamalization as nixtamalized flour needed half the amount of oil during dough formation. T1 showed highest calcium (mg/100 g) of 466 which was significantly (p < 0.05) higher than all other groups. The overall acceptability of T2 (8.6) was significantly (p < 0.05) higher than T1 (7.8), C2 (7.4) and C1 (6.8) on the nine-point Hedonic scale.

The developed chips are superior in terms of higher protein and minerals with better organoleptic acceptability and lower fat content in comparison to both corn chips and nixtamalized corn chips. The multi-grain chip therefore offers a new option for the consumer in high-quality healthy alternative to corn-based fried snacks.

Debates why and how some practices become universal – taking as a case in point closed‐chest massage (CCCM). Points out that CCCM was recognized in 1960 and its use generated heated debates, which altered the technique and reshuffled existing infrastructures. Claims that debates act as a catalyst for university. Investigates the emergence of CCCM, the debate on the merits (or otherwise) of closed versus open‐chested cardiac massage, and who could use the method of CCCM. Indicates that CCCM only became universally practised when it was incorporated into the infrastructure for dealing with emergency cases, and thus became taken for granted.

Excellenzen meine sehr verehrten Damen und Herren liebe Kollegen Es ist mir eine besondere Freude und Ehre, erstmals einen AIEST Kongress in der Sozialistischen Republik der Tschechoslowakei zu eröffnen und dies in der prächtigen Stadt Prag, der Hauptstadt und dem kulturellen und politischen Mittelpunkt. Die Stadt ist durch ihr reiches Erbe an kulturellen Gütern besonders für unsern 34. Kongress geeignet. Auf den berechtigten Wunsch der Organisatoren des diesjährigen Kongresses hin haben wir das Thema “Tourismus und architektonisches Erbe — kulturelle, rechtliche, wirtschaftliche und marketing‐orientierte Aspekte” gewählt.

The current study aims to analyze the role of International Federation of Accountants (IFAC) in sustainability issues and its impact on the attitude of practitioners (auditors) in industrial companies. The current study relies on the analytical method, one of the tools of the inductive approach, by examining the literature of researchers, international and local organizations, publications, series, alerts, and topics dealt with by the IFAC, as well as reviewing studies, theoretical and applied research, periodicals, books, and statistics. And specialized publications for this subject, which is related to other sciences – such as – environmental science, economic, and political sciences. The study reached many results, the most important of which are: (1) The first half of the current decade has seen high interest from the IFAC, has led to the issuance of International Auditing and Assurance Standards Board (IAASB) international standard on assurance engagements 3410, (GHG) Statements. (2) Sustainability has become important to a growing number of enterprises, and may have a significant influence, in certain cases, the financial statements, also became the sustainability of the topics under increasing attention from users of financial statements. Thus, the financial statements will need a practitioner to take into consideration sustainability issues and a private greenhouse gas when auditing the financial statements. This study is distinguished by analyzing the role of the IFAC and the IAASB for the period from 1998 to 2023 regarding sustainability issues.

This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming and powder metallurgy are briefly discussed. The range of applications of finite elements on the subjects is extremely wide and cannot be presented in a single paper; therefore the aim of the paper is to give FE users only an encyclopaedic view of the different possibilities that exist today in the various fields mentioned above. An appendix included at the end of the paper presents a bibliography on finite element applications in material processing for the last five years, and more than 1100 references are listed.

In this paper, two promising corrosion inhibitors based on natural and eco-friendly materials such as peanut fatty acids (PFA) were prepared and challenged with a common efficient commercial inhibitor. Two amino derivatives based on aliphatic and aromatic compounds such as 2-amino-2-methyl-1-propanol (AMP) and 2-amino-2-phenyl-1-propanol (APP), respectively, were used and reacted with PFA under controlled conditions to produce the corrosion inhibitors. The prepared inhibitors, namely, PFA-AMP (inhІ) and PFA-APP (inhІІ), were confirmed and characterized by Fourier transfer infrared spectroscopy, acid value determination and viscosity measurements.

First, different coating formulations free from any inhibitors were prepared and irradiated under different doses of electron beam source to select the best dose. Several concentrations of synthesized anticorrosion materials were then added to coating formulations to estimate them as anticorrosion materials for mild steel panels. Then, all formulations were coated and polymerized at a dose of 10 kGy. The corrosion tests, weight loss and water uptake were studied for all films after immersion in 3.5% sodium chloride. Moreover, the chemical and physico-mechanical properties were determined for all films.

The results exhibited that the different concentrations of two inhibitors did not show any significant change on the different properties of all films, and the best concentration, which gives the better protection for steel panels, was to be 1.0 g for two inhibitors.

It was found that the protection efficiency of the inhІ is better and higher than that of the inhІІ and also of the commercial inhibitor with the following order: inhІ > commercial inhibitor > inhІІ.

This study aims to focus on how reactive diluents with mono- and di-functionalities affect the properties of resin formulation developed from bioderived precursors. A hydroxyethyl methacrylate (HEMA) terminated urethane acrylate oligomer was synthesized and characterized to study its application in stereolithography 3D printing with different ratios of isobornyl acrylate and hexanediol diacrylate.

Polyester polyol was synthesized from suberic acid and butanediol. Additionally, isophorone diisocyanate, polyester polyol and HEMA were used to create urethane acrylate oligomer. Fourier transform infrared spectroscopy and ¹H NMR were used to characterize the polyester polyol and oligomer. Various formulations were created by combining oligomer with reactive diluents in concentrations ranging from 0% to 30% by weight and curing with ultraviolet (UV) radiation. The cured coatings and 3D printed specimens were then evaluated for their properties.

The findings revealed an improvement in thermal stability, contact angle value, tensile strength and surface properties of the product which indicated its suitability for use as a 3D printing material.

This study discusses how oligomers that have been cured by UV radiation with mono- and difunctional reactive diluents give excellent coating characteristics and demonstrate suitability and stability for 3D printing applications.

Very little Australian literature looks at women as leaders in education. Using theoretical viewpoints emerging out of a biographical and historical analysis, it is possible to construct a more inclusive model of leadership which includes both men and women in the past. Mapping such a process historically and biographically can give a detailed assessment of the social, historical and political dimensions of particular women leaders′ lives and also develop a theoretical framework, which gives equal status to the leadership experiences more common to women. Presents a historical narrative where recording lives raises critical questions at the same time as it unearths new evidence of the history of women educationists in Australia.

The purpose of this paper is to develop a framework for mapping the Indian Public Distribution System (PDS) using multi-agent system (MAS). The entire PDS supply chain from purchase to the distribution is mapped in detail by integrating stages of PDS supply chain.

Literature related to PDS, food grain supply chain (FGSC) and MAS is reviewed and critically assessed. Based on this a framework is proposed which will help in improving functioning of PDS.

The PDS has many shortcomings arising from its complex structure and practices which are used to implement it. The authors propose an MAS to model it in which each entity will be modelled as an agent. The authors propose two stages of supply chain. First stage models the processes from procurement to storage of food grain and second stage model the distribution process.

This paper will be of interest to the policy makers and decision makers involved in the PDS by providing the shortfalls in the system and also suggesting a method to model the PDS based on practices of food supply chains.

This paper provides the decision makers in the PDS, a framework to model and assess the entire supply chain. This will help them in effective implementation of the PDS and also improve in the areas of concerns which are pointed the study.