Search results

The purpose of this paper is to explore the effect of ZnO on the structure and properties of micro-arc oxidation (MAO) coating on rare earth magnesium alloy under large concentration gradient.

The macroscopic and microscopic morphology, thickness, surface roughness, chemical composition and structure of the coating were characterized by different characterization methods. The corrosion resistance of the film was studied by electrochemical and scanning Kelvin probe force microscopy. The results show that the addition of ZnO can significantly improve the compactness and corrosion resistance of the MAO coating, but the high concentration of ZnO will cause microcracks, which will reduce the corrosion resistance to a certain extent.

When the concentration of zinc oxide is 8 g/L, the compactness and corrosion resistance of the coating are the best, and the thickness of the coating is positively correlated with the concentration of ZnO.

Too high concentration of ZnO reduces the performance of MAO coating.

The MAO coating prepared by adding ZnO has good corrosion resistance. Combined with organic coatings, it can be applied in corrosive marine environments, such as ship parts and hulls. To a certain extent, it can reduce the economic loss caused by corrosion.

The effect of ZnO on the corrosion resistance of MAO coating in electrolyte solution was studied systematically, and the conclusion was new to the common knowledge.

Prefabricated buildings (PBs) have proven to effectively mitigate carbon emissions in the construction industry. Existing studies have analyzed the environmental performance of PBs considering the shift in construction methods, ignoring the emissions abatement effects of the low-carbon practices adopted by participants in the prefabricated building supply chain (PBSC). Thus, it is challenging to exploit the environmental advantages of PBs. To further reveal the carbon reduction potential of PBs and assist participants in making low-carbon practice strategy decisions, this paper constructs a system dynamics (SD) model to explore the performance of PBSC in low-carbon practices.

This study adopts the SD approach to integrate the complex dynamic relationship between variables and explicitly considers the environmental and economic impacts of PBSC to explore the carbon emission reduction effects of low-carbon practices by enterprises under environmental policies from the supply chain perspective.

Results show that with the advance of prefabrication level, the carbon emissions from production and transportation processes increase, and the total carbon emissions of PBSC show an upward trend. Low-carbon practices of rational transportation route planning and carbon-reduction energy investment can effectively reduce carbon emissions with negative economic impacts on transportation enterprises. The application of sustainable materials in low-carbon practices is both economically and environmentally friendly. In addition, carbon tax does not always promote the implementation of low-carbon practices, and the improvement of enterprises' environmental awareness can further strengthen the effect of low-carbon practices.

This study dynamically assesses the carbon reduction effects of low-carbon practices in PBSC, informing the low-carbon decision-making of participants in building construction projects and guiding the government to formulate environmental policies.

The explosion of data due to the sophistication of information and communication technology makes it simple for prospective tourists to learn about previous hotel guests' experiences. They prioritize the rating score when selecting a hotel. However, rating scores are less reliable for suggesting a personalized preference for each aspect, especially when they are in a limited number. This study aims to recommend ratings and personalized preference hotels using cross-domain and aspect-based features.

We propose an aspect-based cross-domain personalized recommendation (AsCDPR), a novel framework for rating prediction and personalized customer preference recommendations. We incorporate a cross-domain personalized approach and aspect-based features of items from the review text. We extracted aspect-based feature vectors from two domains using bidirectional long short-term memory and then mapped them by a multilayer perceptron (MLP). The cross-domain recommendation module trains MLP to analyze sentiment and predict item ratings and the polarities of the aspect based on user preferences.

Expanded by its synonyms, aspect-based features significantly improve the performance of sentiment analysis on accuracy and the F1-score matrix. With relatively low mean absolute error and root mean square error values, AsCDPR outperforms matrix factorization, collaborative matrix factorization, EMCDPR and Personalized transfer of user preferences for cross-domain recommendation. These values are 1.3657 and 1.6682, respectively.

This study assists users in recommending hotels based on their priority preferences. Users do not need to read other people's reviews to capture the key aspects of items. This model could enhance system reliability in the hospitality industry by providing personalized recommendations.

This study introduces a new approach that embeds aspect-based features of items in a cross-domain personalized recommendation. AsCDPR predicts ratings and provides recommendations based on priority aspects of each user's preferences.

The aim of this paper is to solve the toxic and harmful problems caused by traditional volatile corrosion inhibitor (VCI) and to analyze the effect of the layered structure on the enhancement of the volatile corrosion inhibition prevention performance of amino acids.

The carbon dots-montmorillonite (DMT) hybrid material is prepared via hydrothermal process. The effect of the DMT-modified alanine as VCI for mild steel is investigated by volatile inhibition sieve test, volatile corrosion inhibition ability test, electrochemical measurement and surface analysis technology. It demonstrates that the DMT hybrid materials can improve the ability of alanine to protect mild steel against atmospheric corrosion effectively. The presence of carbon dots enlarges the interlamellar spacing of montmorillonite and allows better dispersion of alanine. The DMT-modified alanine has higher volatilization ability and an excellent corrosion inhibition of 85.3% for mild steel.

The DMT hybrid material provides a good template for the distribution of VCI, which can effectively improve the vapor-phase antirust property of VCI.

The increased volatilization rate also means increased VCI consumption and higher costs.

Provides a new way of thinking to replace the traditional toxic and harmful VCI.

For the first time, amino acids are combined with nano laminar structures, which are used to solve the problem of difficult volatilization of amino acids.

The purpose of this paper is to use the corresponding magnetic sensor and detection method to detect and image the defects of small diameter pipelines. Urban gas pipeline is an energy transportation tool for urban industrial production and social life, which is closely related to urban safety. Preventing the occurrence of urban gas pipeline transportation accidents and carrying out pipeline defect detection are of great significance for the urban economic and social stability. To perform pipeline defect detection, the magnetic flux leakage internal detection method is generally used in the detection of large-diameter long-distance oil and gas pipelines. However, in terms of the internal detection of small-diameter pipelines, due to the heavy weight, large structure of the detection device and small pipe diameter, the detection is more difficult.

In order to solve the above matters, self-made three-dimensional magnetic sensor and three-dimensional magnetic flux leakage imaging direct method are proposed for studying the defect identification. Firstly, for adapting to the diameter range of small-diameter pipelines, and containing the complete information of the defect, a self-made three-dimensional magnetic sensor is made in this paper to improve the accuracy of magnetic flux leakage detection. And on the basis of it, a small diameter pipeline defect detection system is built. Secondly, as detection signal may be affected by background magnetic field interference and the jitter interference, the complete ensemble empirical mode decomposition with adaptive noise method is utilized to screen the detected signal. As a result, the useful signal is reconstructed and the interference signal is removed. Finally, the defect contour inversion imaging of detection is realized based on the direct method of three-dimensional magnetic flux leakage imaging, which includes three-dimensional magnetic flux leakage detection data and data segmentation recognition.

The three-dimensional magnetic flux leakage imaging experimental results shown that, compared to the actual defects, the typical defects, irregular defects and crack groove defects can be analyzed by the magnetic flux leakage defect contour imaging method in qualitative and quantitative way respectively, which provides a new idea for the research of defect recognition.

A three-dimensional magnetic sensor is made to adapt the diameter range of small diameter pipeline, and based on it, a small-diameter pipeline defect detection system is built to collect and display the magnetic flux leakage signal.

Autonomous mobile robots (AMRs) play a crucial role in industrial and service fields. The paper aims to build a LiDAR-based simultaneous localization and mapping (SLAM) system used by AMRs to overcome challenges in dynamic and changing environments.

This research introduces SLAM-RAMU, a lifelong SLAM system that addresses these challenges by providing precise and consistent relocalization and autonomous map updating (RAMU). During the mapping process, local odometry is obtained using iterative error state Kalman filtering, while back-end loop detection and global pose graph optimization are used for accurate trajectory correction. In addition, a fast point cloud segmentation module is incorporated to robustly distinguish between floor, walls and roof in the environment. The segmented point clouds are then used to generate a 2.5D grid map, with particular emphasis on floor detection to filter the prior map and eliminate dynamic artifacts. In the positioning process, an initial pose alignment method is designed, which combines 2D branch-and-bound search with 3D iterative closest point registration. This method ensures high accuracy even in scenes with similar characteristics. Subsequently, scan-to-map registration is performed using the segmented point cloud on the prior map. The system also includes a map updating module that takes into account historical point cloud segmentation results. It selectively incorporates or excludes new point cloud data to ensure consistent reflection of the real environment in the map.

The performance of the SLAM-RAMU system was evaluated in real-world environments and compared against state-of-the-art (SOTA) methods. The results demonstrate that SLAM-RAMU achieves higher mapping quality and relocalization accuracy and exhibits robustness against dynamic obstacles and environmental changes.

Compared to other SOTA methods in simulation and real environments, SLAM-RAMU showed higher mapping quality, faster initial aligning speed and higher repeated localization accuracy.

As an effective tool to promote rational resource allocation and facilitate the development of green management practices such as enterprise digital innovation, the green credit policy has recently gained extensive attention. The purpose of this paper is to analyze the relationship between green credit policies and the digital innovation of enterprises, and to further explore the mechanism of action between them and their boundary conditions.

Based on micro-level data on Chinese firms from 2007 to 2019, this paper constructs a difference-in-differences (DID) model to investigate the impact and intrinsic mechanisms of green credit policies on firms' digital innovation and its boundary conditions, with the help of a quasi-natural experiment, i.e. the Green Credit Guidelines.

Green credit policies inhibit digital innovation and fail to compensate for innovation. The analysis of the mechanism shows that the implementation of green credit policies has a negative impact on digital innovation by increasing the financing constraints faced by firms, and has also a crowding-out effect on R&D investment, resulting in a disincentive to digital innovation. Further analysis reveals that the negative impact of green credit policies on digital innovation is more pronounced in state-owned enterprises, enterprises without financially experienced executives, and in the eastern regions of China.

This study provides empirical evidence to understand the effectiveness and mechanism of influence of green credit policies on enterprise digital innovation, providing also a basis to further improve green credit policies.

In the context of fixed-wing aircraft wing assembly, there is a need for a rapid and precise measurement technique to determine the center distance between two double-hole components. This paper aims to propose an optical-based spatial point distance measurement technique using the spatial triangulation method. The purpose of this paper is to design a specialized measurement system, specifically a spherically mounted retroreflector nest (SMR nest), equipped with two laser displacement sensors and a rotary encoder as the core to achieve accurate distance measurements between the double holes.

To develop an efficient and accurate measurement system, the paper uses a combination of laser displacement sensors and a rotary encoder within the SMR nest. The system is designed, implemented and tested to meet the requirements of precise distance measurement. Software and hardware components have been developed and integrated for validation.

The optical-based distance measurement system achieves high precision at 0.04 mm and repeatability at 0.02 mm within a range of 412.084 mm to 1,590.591 mm. These results validate its suitability for efficient assembly processes, eliminating repetitive errors in aircraft wing assembly.

This paper proposes an optical-based spatial point distance measurement technique, as well as a unique design of a SMR nest and the introduction of two novel calibration techniques, all of which are validated by the developed software and hardware platform.

The rock drill’s drill tail experiences high-frequency fretting simultaneously in the rotational and axial directions. Due to the complex working characteristics and the low viscosity of the water medium, the pure water seal is susceptible to damage and failure. The purpose of this paper is to enhance the water seal’s performance.

The Y-shaped seal ring is modeled and simulated using orthogonal testing. Through analysis of the impact of various seal section parameters on sealing performance, the maximum contact stress and maximum Von Mises stress are selected as indicators of sealing effectiveness.

The maximum contact stress is proportional to lip thickness and chamfer length but inversely proportional to lip length. Meanwhile, the maximum Von Mises stress is directly influenced by lip depth and the included angle of the lip and drill tail but is inversely proportional to the lip thickness. The enhanced Y-shaped water seal sees reductions of 15% and 45% in maximum contact stress and maximum Von Mises stress, respectively.

This paper used analytical method and model that is helpful for design of the water seal’s structure in complex working characteristics and the low viscosity of the water medium.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-11-2023-0366/

Due to the cross-network effect, two-sided users communicate with each other, producing a coupling network. To study the spread of platform self-operation in two-sided users' marketing and purchasing tactics, this paper considers the differences in reputation acquired by platform-owned and third-party operating channels.

This study proposes a two-layer network with cross-network links: one layer represents the social network of consumers, while the other layer represents the competitive network of buyers. A closed system of differential equations, based on the binary dynamics of the stochastic network, is developed to study the trend and stability points of the platform self-operation dissemination. Then the overall benefits of platform are analyzed to unify the platform diffusion and pricing strategies.

The degree of difference in social influence and cross-network effects affect diffusion synergistically. Cross-network effects hinder diffusion when there is a significant difference of social influence between consumers and sellers but promote diffusion when there is little difference of social influence between consumers and sellers. Additionally, the network weights and reputation gap exhibit a nonlinear correlation with diffusion. For pricing strategy of the platform, it can achieve maximum profit when the pricing of self-operated goods and third-party-operated goods is equal.

This study considers the complex network architecture created by bilateral markets and the dynamic influence of group interactions on product. Additionally, this study takes reputation into account when considering the price and dissemination tactics of various operating channels, offering guidelines for platforms to control merchants and mediate disputes between various operating channels.