Search results

The purpose of this paper is to review cases of artificial reefs built through additive manufacturing (AM) technologies and analyse their ecological goals, fabrication process, materials, structural design features and implementation location to determine predominant parameters, environmental impacts, advantages, and limitations.

The review analysed 16 cases of artificial reefs from both temperate and tropical regions. These were categorised based on the AM process used, the mortar material used (crucial for biological applications), the structural design features and the location of implementation. These parameters are assessed to determine how effectively the designs meet the stipulated ecological goals, how AM technologies demonstrate their potential in comparison to conventional methods and the preference locations of these implementations.

The overview revealed that the dominant artificial reef implementation occurs in the Mediterranean and Atlantic Seas, both accounting for 24%. The remaining cases were in the Australian Sea (20%), the South Asia Sea (12%), the Persian Gulf and the Pacific Ocean, both with 8%, and the Indian Sea with 4% of all the cases studied. It was concluded that fused filament fabrication, binder jetting and material extrusion represent the main AM processes used to build artificial reefs. Cementitious materials, ceramics, polymers and geopolymer formulations were used, incorporating aggregates from mineral residues, biological wastes and pozzolan materials, to reduce environmental impacts, promote the circular economy and be more beneficial for marine ecosystems. The evaluation ranking assessed how well their design and materials align with their ecological goals, demonstrating that five cases were ranked with high effectiveness, ten projects with moderate effectiveness and one case with low effectiveness.

AM represents an innovative method for marine restoration and management. It offers a rapid prototyping technique for design validation and enables the creation of highly complex shapes for habitat diversification while incorporating a diverse range of materials to benefit environmental and marine species’ habitats.

Because of the advantages of high deposition efficiency and low manufacturing cost compared with other additive technologies, robotic wire arc additive manufacturing (WAAM) technology has been widely applied for fabricating medium- to large-scale metallic components. The additive manufacturing (AM) method is a relatively complex process, which involves the workpiece modeling, conversion of the model file, slicing, path planning and so on. Then the structure is formed by the accumulated weld bead. However, the poor forming accuracy of WAAM usually leads to severe dimensional deviation between the as-built and the predesigned structures. This paper aims to propose a visual sensing technology and deep learning–assisted WAAM method for fabricating metallic structure, to simplify the complex WAAM process and improve the forming accuracy.

Instead of slicing of the workpiece modeling and generating all the welding torch paths in advance of the fabricating process, this method is carried out by adding the feature point regression branch into the Yolov5 algorithm, to detect the feature point from the images of the as-built structure. The coordinates of the feature points of each deposition layer can be calculated automatically. Then the welding torch trajectory for the next deposition layer is generated based on the position of feature point.

The mean average precision score of modified YOLOv5 detector is 99.5%. Two types of overhanging structures have been fabricated by the proposed method. The center contour error between the actual and theoretical is 0.56 and 0.27 mm in width direction, and 0.43 and 0.23 mm in height direction, respectively.

The fabrication of circular overhanging structures without using the complicate slicing strategy, turning table or other extra support verified the possibility of the robotic WAAM system with deep learning technology.

Supply chain management (SCM)-embedded valuable resources, such as capital, raw-materials, products, partners, customers and finished inventories, where the evaluation of environmental texture and flexibilities are needed to perceive sustainability. The present study aims to identify and evaluate the directory of green and agile (G-A) attributes based on decision support framework (DSF) for identifying dominating measures in SCM.

DSF is developed by exploiting generalized interval valued trapezoidal fuzzy numbers (GIVTFNs). Two technical approaches, i.e. degree of similarity approach (DSA) and distance approach (DA) under the extent boundaries of GIVTFNs, are implicated for data analytics and for recognizing constructive G-A measures based on comparative study for robust decision. A fuzzy-based performance indicator, i.e. fuzzy performance important index (FPII), is presented to enumerate the weak and strong G-A characteristics to manage knowledge risks in allied business environment.

The modeling is illustrated from the insights of decision-makers for augmenting business value based on cognitive identification of measures, where the best performance score is identified by the “sustainable packaging” under the traits of green supply chain management (GSCM). “The use of Web-based applications” under the traits of agile supply chain management (ASCM) and “Outsourcing flexibility” under traits of ASCM is found as the second and third most significant performance characteristics for business sustainability. Additionally, the “Reutilization (recycling) and reprocessing” under GSCM in manufacturing and “Responsiveness and speed toward customers needs” under ASCM are found difficult in attainment.

The G-A evaluation will assist in attaining performance excellence in day-to-day operations and overall functioning. The outcomes will help executives to plan strategic objectives and attaining success.

To reinforce the capabilities of SCM, wide extent of G-A dimensions are presented, concept of FPII is reported to manage knowledge risks based on identification of strong attributes and two technical approaches, i.e. DSA and DA under GIVTFNs are presented for attaining robust decision and directing managerial decision-making process.

Agriculture is the backbone of a country, contributing more than half of the sector of economy throughout the world. The need for precision agriculture is essential in evaluating the conditions of the crops with the aim of determining the proper selection of pesticides. The conventional method of pest detection fails to be stable and provides limited accuracy in the prediction. This paper aims to propose an automatic pest detection module for the accurate detection of pests using the hybrid optimization controlled deep learning model.

The paper proposes an advanced pest detection strategy based on deep learning strategy through wireless sensor network (WSN) in the agricultural fields. Initially, the WSN consisting of number of nodes and a sink are clustered as number of clusters. Each cluster comprises a cluster head (CH) and a number of nodes, where the CH involves in the transfer of data to the sink node of the WSN and the CH is selected using the fractional ant bee colony optimization (FABC) algorithm. The routing process is executed using the protruder optimization algorithm that helps in the transfer of image data to the sink node through the optimal CH. The sink node acts as the data aggregator and the collection of image data thus obtained acts as the input database to be processed to find the type of pest in the agricultural field. The image data is pre-processed to remove the artifacts present in the image and the pre-processed image is then subjected to feature extraction process, through which the significant local directional pattern, local binary pattern, local optimal-oriented pattern (LOOP) and local ternary pattern (LTP) features are extracted. The extracted features are then fed to the deep-convolutional neural network (CNN) in such a way to detect the type of pests in the agricultural field. The weights of the deep-CNN are tuned optimally using the proposed MFGHO optimization algorithm that is developed with the combined characteristics of navigating search agents and the swarming search agents.

The analysis using insect identification from habitus image Database based on the performance metrics, such as accuracy, specificity and sensitivity, reveals the effectiveness of the proposed MFGHO-based deep-CNN in detecting the pests in crops. The analysis proves that the proposed classifier using the FABC+protruder optimization-based data aggregation strategy obtains an accuracy of 94.3482%, sensitivity of 93.3247% and the specificity of 94.5263%, which is high as compared to the existing methods.

The proposed MFGHO optimization-based deep-CNN is used for the detection of pest in the crop fields to ensure the better selection of proper cost-effective pesticides for the crop fields in such a way to increase the production. The proposed MFGHO algorithm is developed with the integrated characteristic features of navigating search agents and the swarming search agents in such a way to facilitate the optimal tuning of the hyperparameters in the deep-CNN classifier for the detection of pests in the crop fields.

Over the last two decades, there has been a significant increase in incivility within the higher education sector, potentially due to mounting pressure and demands on academics, both collectively and individually. The effects on various aspects of academia, such as knowledge and learning, however, remain largely unexplored. The purpose of this research is to fill the gap by performing a theoretical trend analysis and subsequently empirically investigating the impact of workplace incivility on research scholars’ learning engagement and knowledge sharing intentions, including the mediating role of self-esteem.

This study uses a three-stage methodological process: first, a thorough theoretical (bibliographic) analysis of scientific publications, using Biblioshiny, to identify the trends of workplace incivility; second, an empirical, qualitative exploration of the emergent themes and subthemes based on 102 in-depth interviews with research scholars, using NVivo 12 Plus; and third, quantitative testing, using 154 responses and structural equation modeling.

The authors verify a visible negative association between incivility and learning engagement, incivility and knowledge sharing intentions as well as self-esteem’s mediating effect on this relationship. Also, the thematic analysis revealed three distinct themes: the type of incivility; reasons for such incidences; and the impact of such incidences on research scholars.

The research bears implications both to theory and practice. Regarding the former, the gravity and graveness of incivility versus knowledge and learning, within the academic workplace environment, are not simply highlighted, but analyzed and refined, with explicit findings of both scholarly and practicable worth; that also provide solid foundations and avenues for future research.

Further to its primary findings, the research contributes to extant knowledge by elucidating and explicating the topic, both theoretically and empirically, as well as by presenting implications for theory and practice. Regarding practical implications, this research sheds light on how to develop an appropriate organizational culture that facilitates learning engagement and increases knowledge sharing intentions, by nurturing the identified explicit and underlying motivators of civility.

Inclination angle has been reported to have an enhancing effect on the thermal-hydraulic characteristics and entropy of some thermal systems. Therefore, this paper aims to numerically investigate the effects of inclination angle, volume concentration and Reynolds number on the thermal and hydraulic characteristics and entropy generation rates of water-based Al₂O₃ nanofluids through a smooth circular aluminum pipe in a turbulent flow.

A constant heat flux of 2,000 Watts is applied to the circular surface of the tube. Reynolds number is varied between 4,000 and 20,000 for different volume concentrations of alumina nanoparticles of 0.5%, 1.0% and 2.0% for tube inclination angles of ±90o, ±60o, ±45o, ±30o and 0o, respectively. The simulation is performed in an ANSYS Fluent environment using the realizable kinetic energy–epsilon turbulent model.

Results show that +45o tube orientation possesses the largest thermal deviations of 0.006% for 0.5% and 1.0% vol. concentrations for Reynolds numbers 4,000 and 12,000. −45o gives a maximum pressure deviation of −0.06% for the same condition. The heat transfer coefficient and pressure drop give maximum deviations of −0.35% and −0.39%, respectively, for 2.0% vol. concentration for Reynolds number of 20,000 and angle ±90o. A 95%–99.8% and 95%–98% increase in the heat transfer and total entropy generation rates, respectively, is observed for 2.0% volume concentration as tube orientation changes from the horizontal position upward or downward.

Research investigating the effect of inclination angle on thermal-hydraulic performance and entropy generation rates in-tube turbulent flow of nanofluid is very scarce in the literature.

Quality management practices (QMP) have stood as one of the critical strategic differentiators for enhancing firm performance. The production and manufacturing industry is the main driving force of economic growth and social development for any developed or developing country. This study aims to focus on two primary dimensions of QMP: soft quality management practices (SQMP) and hard quality management practices (HQMP) from the socio-technical system perspectives. Based on institutional theory perspectives, the study explores the impact of SQMP and HQMP on quality performance (QP), innovation performance (IVP) and financial performance (FP) in Indian oil processing organizations.

A proposed research model is validated using 289 cross-sectional survey data collected from the senior officials of oil processing firms in India. Covariance-based structural equation modeling is used to verify the proposed theoretical model.

SQMP, directly and indirectly, influenced QP and IVP while only indirectly to FP mediated through QP. HQMP directly impacted only QP while indirectly to IVP and FP mediated through QP.

Impact of organizational legitimacy in proper utilization or application of QMP in achieving the firm sustainable growth. The future study may address the following Research Question (RQ) also: How do QMP enhance the legitimacy of organizations operating in the oil processing industries? Are there specific mechanisms or pathways through which improved performance contributes to enhanced organizational legitimacy? How does legitimacy impact the success and sustainability of organizations, particularly, within the context of the oil processing industries? Are there regulatory requirements or industry certifications that organizations must adhere to in order to maintain legitimacy?

Similarly, manufacturing firms establish QMP of interaction and maintaining relationships with all the stakeholders, total employee empowerment and involvement, workforce commitment and workforce management, helping to control their reputations and maintain legitimacy (Li et al., 2023). Similarly, in the health industry, the health management information system (HMIS), which uses the DHIS2 platform, establishes that isomorphism legitimizes data QMP among health practitioners and, subsequently, data quality. Further, it was concluded that mimetic isomorphism led to moral and pragmatic legitimacy. In contrast, normative isomorphism led to cognitive legitimacy within the HMIS structure and helped to attain the correctness and timeliness of the data and reports, respectively (Msendema et al., 2023). Quality, flexibility and efficiency of Big Data Analytics through better storage, speed and significance can optimize the operational performance of a manufacturing firm (Verma et al., 2023).

The study provides the academician with the different dimensions of QMP. The study demonstrates how a firm develops multiple performance capabilities through proper QMP. Also, it shows how vital behavioral and managerial perspectives are to QMP and statistically solid tools and techniques. The study draws their importance to risk factors involved in the firms. Since the SQMP play a vital role, thus, emphasis on the behavioral dimension of quality requires more investigation and is in line with hard technological advancements in the quality field.

The study of the impact of HQMP and SQMP on performance is still not established. There are inconsistencies in the findings. The study of the impact of HQMP and SQMP in oil processing industries has not dealt with before. The effects of HQMP and SQMP on the firm’s FP have least been dealt. In context to the intended influence of QM implementation, QP has not been examined as a potential mediator between FP. Research carried out in the past is limited to American and European countries. However, a limited study was done in Asia, and no study has been conducted in the Indian context.

Most emerging economies have made conscious efforts through policy initiatives to attract foreign direct investment (FDI). However, a significant obstacle to FDI inflow has been the prevalence of corruption in the host country. This study, therefore, aims to examine whether there is an optimum corruption value that results in threshold effects of corruption on FDI.

To achieve this objective, this study used Hansen’s (1999) panel threshold regression (PTR) model by using a panel data of 30 sub-Saharan African (SSA) countries from 2000 to 2021.

This study finds that the nexus between corruption and FDI has a single threshold effect, with a 5.37% optimum corruption threshold value. At this threshold value, corruption affects FDI negatively. Any corruption value that is below the threshold value also elicits a negative corruption–FDI relationship. Despite having a negative relationship when the corruption value is above the optimum corruption threshold, it is not statistically significant.

The implication of the results is that it is deleterious to use corrupt practices to draw FDI to SSA nations.

To the best of the authors’ knowledge, this study is one of the first in the corruption–FDI nexus literature to use Hansen’s PTR model to estimate an optimal corruption threshold. The authors recommend that policymakers in the selected SSA countries reconsider the use of corruption to attract FDI because there is an optimal corruption threshold that could impact FDI in the host country.

This study aims to construct a mental health service system for middle school students in the post-COVID-19 era with the framework of Six Sigma DMAIC (define, measure, analyze, improve and control) and analyze the influencing factors of the mental health service system to study the implementation strategies of quality-oriented mental health services in middle schools.

This study was conducted in Tianjin, China, from September to November 2022, and 350 middle school students from Tianjin Public Middle School were selected as subjects. A questionnaire survey was used to collect data. In this study, the Six Sigma DMAIC method, sensitivity analysis method, exploratory factor analysis and principal component analysis were used to analyze the mental health services provided to middle school students.

Based on the Six Sigma DMAIC framework, this study indicates that the contribution rate of the mental health service process factor is the largest in the post-COVID-19 era. The mental health cultivation factor ranks second in terms of its contribution. Mental health quality and policy factors are also important in the construction of middle school students’ mental health service system. In addition, the study highlights the importance of parental involvement and social support in student mental health services during the post-COVID-19 era.

To the best of the authors’ knowledge, a study on middle school students’ mental health in the post-Covid-19 era has not yet been conducted. This study developed a quality-oriented mental health system and analyzed the influencing factors of mental health for middle school students based on data analysis and the Six Sigma DMAIC method.

Amidst unpredictable and turbulent periods, such as the COVID-19 pandemic, service organization’s responses are required to be innovative, adaptable and resilient. The purpose of this study is to explore the utilization of both reconfiguration and transformational strategies as instruments for cultivating resilience and advancing sustainability in service organizations.

The study examines a proposed resilience model using fuzzy logic. The research also used a semantic differential scale to capture nuanced and intricate attitudes. Finally, to augment the validity of the resilience model, a measurement scale was formulated using business mathematics and expert opinions.

Although investing in resilience training can help organizations gain control and maintain their operations in times of crisis, it may not directly help service organizations understand the external turmoil, seek available resources or create adaptive remedies. Conversely, high levels of reconfiguration and transformation management vigour empower a service organization’s revolutionary, malleable vision, organizational structure and decision-making processes, welcoming talented and innovative employees to enhance capabilities during crises.

The resilience model bestows a comprehensive understanding of the pertinence of building resilience for service organizations identifying the antecedents that influence the adoption of these strategies and introduces a range of theoretical perspectives that empowers service organizations to conceptualize and plan for building resilience. The research guides service organizations to become more resilient to external shocks and adapt to changing circumstances by diversifying their offerings, optimizing their resources and adopting flexible work arrangements. The study elaborates on the enhancement of resilience, increasing innovation, improving efficiency and enhancing customer satisfaction for service organizations to remain competitive and contribute to positive social and economic outcomes through the adoption of both reconfiguration and transformational strategies.

The study also guides the service organizations to become more resilient to external shocks and adapt to changing circumstances by diversifying their offerings, optimizing their resources and adopting flexible work arrangements. Rapid innovation and business model innovation are essential components, enabling service organizations to foster a culture of innovation and remain competitive. In addition, the adoption can lead to improved financial performance, job creation and economic growth, contributing to positive social and economic impacts.

The resilience model bestows a comprehensive understanding of the pertinence of building resilience for service organizations. It identifies the antecedents that influence the adoption of these strategies and introduces a range of theoretical perspectives that empowers service organizations to conceptualize and plan for building resilience. The research also provides a foundation for further investigation into the effectiveness of these strategies and their impact on organizational performance and sustainability. By better preparing service organizations for disruptions and uncertainties, this research triggers ameliorated organizational performance and sustainability.

Within the realm of the service industry, the present investigation has undertaken the development, quantification and scrutiny of both resilience and tenacity. In addition, it has delved into the intricate dynamics surrounding the influencing factors and antecedents that bear upon resilience, elucidating their consequential impact on the operational performance and outlook of service-oriented organizations. The findings derived from this research furnish valuable insights germane to enhancing operational efficacy and surmounting impediments within the sector.