Search results

This study aims to prepare UV protection and hydrophobic fabric through modifying cotton fabric by graphene oxide and silane coupling agent. The graphene oxide and silane coupling agent (KH570) are anchored on the cotton fabric by a stable chemical bond.

Graphene oxide was prepared by modified Hummers method. The fabric sample was treated with graphene oxide and silane coupling agent KH570 using simple dipping-padding-drying method. The effects of the dosage of graphene oxide, silane coupling agent KH570 and curing temperature were determined by single variable experiment and orthogonal experiment, The UVA and UVB transmittances in ultraviolet light of the sample fabric were characterized, and the contact angle test method with water was used to indicate the hydrophobicity of the sample fabric. The structure and surface of the fabric were analyzed using Fourier-transform infrared spectroscopy and scanning electron microscopy.

The cotton fabric was successfully modified by graphene oxide and silane coupling agent KH570. Compared with the untreated fabric, the surface of the fabric was smooth, and there was no gap on the fiber. The graphene oxide, silane coupling agent KH570 and cotton fabric combined tightly. The UPF value of the modified fabric was 50+, and the contact angle reached 138.1°. It had excellent UV protection and hydrophobic properties.

Although graphene oxide and silane coupling agents KH570 had successfully endowed the cotton fabric with good UV protection and hydrophobic properties, graphene oxide and silane coupling agent KH570 are expensive and used in large quantities. There are certain limitations in the actual life and production process.

After treating with silane coupling agent, the hydrophilic fabric treated with graphene oxide is being translated into hydrophobic, and graphene oxide bonded with cotton. The modified fabrics also have excellent UV protection. This fabric can be used for outdoor sports such as clothes and tents.

Cotton fabric treated with graphene oxide generally by simple dip-dry-cure method is hydrophilic and graphene oxide is easy to drop. The usage of silane coupling agent KH570 as a crosslinking agent to link graphene oxide and cotton fibers has not been reported yet. The modified fabrics have both UV protection and hydrophobic properties.

This paper aims to determine whether application of graphene layers to cuprammonium filaments affords the latter with excellent mechanical properties and improves their electrical properties. At the same time, a circuit model was established to explore the conductive mechanism of the filament. The actual model is used to verify the correctness of the model.

The cuprammonium filaments were desizing, the graphene oxide layer-by-layer sizing and reduction integration process by a continuous sizing machine. The electrical properties of mono- and multifilaments in the static condition, as well as the dynamic–mechanical properties of multifilaments, were analysed, and the related conductive mechanism of the filaments was deduced.

Cuprammonium filaments coated with graphene layers showed good electrical conductivity, and their volume resistance decreased to 4.35 O·cm with increasing number of graphene coats. The X-ray diffraction and thermogravimetric analysis results showed that the graphene layer treatment changed the crystallinity of the copperammonia filaments and improved the thermal stability of the filaments. In the dynamic case, filament resistance was calculated using the equivalent resistance model, and the fitting difference observed was small. This result confirmed the high fit of this circuit model.

Up to the knowledge from literature review, there are no reports on theoretical research on the relation between the electro-mechanical property and structure of conductive filaments.

The purpose of this paper is to develop a new simple technique to synthesize graphene film on a flexible polyethylene terephthalate (PET) substrate and applied as a strain sensor.

Graphene film was synthesized using laser treatment of graphene oxide (GO) film deposited on PET substrate. A universal laser system was used to simultaneously reduce and pattern the GO film into laser reduced graphene oxide (LRGO) film.

The laser treatment synthesizes a multilayer graphene film with overlapped flakes, which shows structure integrity, mechanical flexibility and electrical conductivity of 1,330 S/m. The developed LRGO/PET film was used to fabricate a high sensitivity strain sensor. The sensitivity and temperature dependency of its gauge factor (GF) was examined at applied strains up to 0.25 per cent and operating temperatures up to 80°C. The fabricated sensor shows stable GF of approximately 78 up to 60°C with standard error of the mean not exceeding approximately ± 0.2.

The proposed method offers a new simple and productive technique of fabricating large-scale graphene-based flexible devices at a low cost.

The purpose of this paper is study of the type of functional group and its situation on phenyl molecule, in increasing the corrosion protection of modified graphene layers by it. Corrosion protection efficiency of graphene was raised via modifying the surface of graphene-coated carbon steel (CS/G) by using aromatic molecules. Phenyl groups with three different substitutions including COOH, NO₂ and CH₃ grafted to graphene via diazonium salt formation route, by using carboxy phenyl, nitro phenyl and methyl phenyl diazonium salts in ortho, meta and para spatial situations.

Molecular bindings were characterized by using X-ray diffractometer, fourier-transform infrared spectroscopy (FTIR), Raman and scanning electron microscopy (SEM)/ energy dispersive X-ray analysis (EDXA) methods. Anti-corrosion performance of modified CS/G electrodes was evaluated by weight loss and electrochemical techniques, potentiodynamic polarization (Tafel) and electrochemical impedance spectroscopy, in 3.5 per cent NaCl solution.

The obtained results confirmed covalently bonding of phenyl groups to the graphene surface. Also, the observed results showed that substitution spatial situations on phenyl groups can affect charge transfer resistance (R_ct), corrosion potential (E_corr), corrosion current density (j_corr) and the slope of the anodic and cathodic reaction (ß_a,c), demonstrating that the proposed modification method can hinder the corrosion reactions. The proposed modification led to restoring the graphene surface defects and consequently increasing its corrosion protection efficiency.

The obtained results from electrochemical methods proved that protection efficiency was observed in order COOH < NO₂ < CH₃ and MPD in the para spatial situation and showed the maximum protection efficiency of 98.6 per cent in comparison to other substitutions. Finally, the ability of proposed graphene surface modification route was further proofed by using surface methods, i.e. SEM and EDXA, and contact angles measurements.

The purpose of this study is to corroborate the advanced tribological properties of graphene as a lubricant additive.

Different concentrations of functionalized graphene were coated on the substrate surface. Tribological properties of the graphene lubricants were carried out by ball-on-disk tribology tests. Wear mechanism of functionalized graphene was studied by observing wear scars on the substrate surface. Finally, the wear resistance of modified graphene was calculated by calculating and analyzing the applied experimental conditions and the obtained experimental data.

The best concentration of graphene lubricant is 0.5 wt.% which shows the best tribological performance. And the coefficient of friction is 0.08. Compared with the dry friction condition, the coefficient of friction and wear rate of best graphene lubricant decreased by 80% and 82%.

The formula of graphene lubricant is independently developed and works very well. Graphene lubricant can prevent the substrate from oxidation. The thickness of the graphene lubricant is about 4-7µm. The concept of anti-wear strength was introduced in this paper. When 0.5 Vol.% graphene was added, the anti-wear strength was greatly improved from 115.3 kg·mm-2 to 657.6 kg·mm-2.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-08-2019-0344

Nanotechnology has been able to bind to a wide range of functional textiles in recently. This paper aims to modify graphene oxide (GO) by grafting dimethyl phosphite and perfluorohexyl iodine. It was applied to cotton to obtain a flame-retardant, water-repellent and ultraviolet-resistant multifunctional fabric.

The GO-multi was synthesized by grafted dimethyl phosphite and perfluorohexyl chain and applied to cotton by the dipping-drying method. The surface chemistry of functionalized GO was characterized by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The thermal stability of the fabric was characterized by thermogravimetric analysis (TGA). The combustion properties were evaluated using a microscale combustion calorimeter, match test and TGA. Hydrophobicity of film and fabric surface was characterized by static contact angle, and the UV resistance of the fabric was represented by the ultroviolet procetion factor (UPF) value.

Dimethyl phosphite and perfluorohexyl chains were grafted on the surface of GO successively. In the match test, the GO-multi/cotton kept the original outline of the fabric. According to the micro-scale combustion calorimetry (MCC) data, the value of PHRR and THR of GO-multi/cotton was about 45 per cent lower than that of untreated cotton fabric. It was found from the field-emission scanning electron microscopy (SEM) pictures that the residue of GO-multi/ cotton burned by the match method was more compact and the graphene lamellar structure remained more complete. The hydrophobic effect of GO-multi/cotton was improved compared to untreated cotton, but not better than the fabric treated by the perfluorohexyl chain-grafted GO. The UPF value of GO-multi/cotton reached 253, which indicated that the anti-ultraviolet performance of GO-multi was greatly improved after it was deposited on the cotton fabric.

Although the hydrophobic effect was much higher than that of untreated cotton fabric, its hydrophobic effect was not satisfied, which may be due to the fact that the content of F element content was low. So, it is still needed to explore the modifying method to increase the functional component amount on the GO nanosheet.

This modifying method can be used in any of multifunctional textile preparation process. The hydrophobic and flame-retardant cotton fabric revealed a sample for use in outdoor sports such as clothes and tents.

To meet the needs of multifunctional cotton fabrics, the modification of GO with dimethyl phosphite and perfluorohexyl iodine has not been reported. The modified fabric has flame-retardant, UV-resistant and hydrophobic properties.

This paper aims to report the tribological behavior of Ag nanoparticles/reduced graphene oxide nanocomposites (Ag/RGO NCs) and Ag nanoparticles (Ag NPs) as a green additive in oil with different concentration and under different friction conditions.

The Ag/RGO NCs and Ag NPs were both synthesized in a chemical reduction method. The diameter of silver nanoparticles implanted between RGO sheets was about 25 nm and that of silver sol was 70 nm. The morphology and structure of Ag/RGO NC were characterized by TEM, XRD and FTIR. The tribological properties of Ag/RGO NCs and Ag NPs as lubricant oil additive were evaluated by measuring the friction coefficients and wear of the surface in different condition which were tested on UMT-II.

The results indicated that both the additives improved the friction-reduced and anti-wear properties of paraffin oil, and Ag/RGO NCs has better tribological performance than Ag NPs. The excellent tribological properties were attributed to the special structure of Ag/RGO NC and the formation of tribofilm reducing the friction and wear on the shearing surfaces.

It is relatively difficult to observe the morphology of the lubricant film formed on the friction surface and to analyze the chemical composition at different depths of the lubricant film.

It is the first time for Ag/RGO NCs to be applied to improve the friction-reduced and anti-wear properties of lubricant oil as additive.

The purpose of this paper is related with the comparative study between graphene-based glass fiber–reinforced polymer composites and without graphene composite on polymer matrix. The current study explains the result of amalgamation of 4 Wt.% graphene oxide (GO), in comparison to without graphene, on the mechanical strength of glass fiber/epoxy (GE).

A hand layup technique is used for the experimental study. For this, chemical synthesis process is approached based on Hummer’s theory. For mechanical testing of glass fiber–reinforced graphene composites and without graphene composites, American Society for Testing and Materials-3039 (ASTM3039) standards was adopted. Furthermore, comparatively, composites were characterized by field emission scanning electron microscopy.

Reinforcement of 4.0 Wt.% GO in epoxy matrix material showed 7.46% and 12.31% improvement in mechanical strength and elongation, respectively. Scanning electron microscopy results showed the influence of graphene cumulations in the failure of GO-reinforced GE (GO-GE) composites.

The inimitable things of graphene grounded nanofillers have encouraged in the world of material for their thinkable manipulation in glass fiber polymeric composites. In this work, for the first time, graphene is used as nanofiller in glass fiber epoxy coatings, and their fractography study is investigated.

Graphene, which has abundant availability in nature, is currently under research for its functional applications in the field of textiles. The sp² Hybridized 1-atom-thick planar sheet has been under consideration for its unique electrical, mechanical and thermal properties, but there exists a void for aggregated data on the findings of other co-functional properties attained by the material using graphene oxide (GO) finish. This paper aims to define the techniques of extraction of GO, method of its application on textile material followed by detailed evaluation of the differential functional properties achieved.

The methodology used to explain the multiple functionalities of GO finish have been carried out by starting with the chemistry of graphene and the isolation of GO from graphite, followed by the techniques for its application on the textile along with the study on the induced functional properties that may aid to increase its potential applications.

It has been observed that with the aid of optimization of GO finish, the finish in lieu with the conductive potentialities may further provide with many essential properties such as hydrophobicity, ultraviolet protection and antibacterial property.

The field of research on GO finish is naive and except few properties, many functionalities are still unexplored that may enable its smooth production, handling and expanding its area of application. The agglomeration of scattered findings on the achievable functional properties of GO on various textiles has been achieved in this paper.

This paper aims to provide details of recent developments in nanosensors based on graphene.

Following an introduction, this paper first considers some of the motivations for using graphene in sensors. It then describes a selection of recently reported graphene nanosensors for detecting physical variables, gases, chemical species and biological agents. Finally, brief conclusions are drawn.

Graphene exhibits a number of unique properties that make it an intriguing candidate for use in sensors. Research is still at a relatively early stage, but prototype sensors have been demonstrated which respond to numerous physical, molecular and biological variables.

This paper provides a timely review of the use of graphene in sensors.