Search results
1 – 10 of over 1000Takumi Yamaguchi and Fuminobu Ozaki
The main purpose of this study was to evaluate the tensile strengths of JIS G3549 super high-strength steel strand wire ropes (1,570 MPa-class high-carbon steels) and wire rope…
Abstract
Purpose
The main purpose of this study was to evaluate the tensile strengths of JIS G3549 super high-strength steel strand wire ropes (1,570 MPa-class high-carbon steels) and wire rope open swaged socket connections at fire and post fire.
Design/methodology/approach
Steady-state tests from ambient temperature (20 °C) to 800 °C, transient-state tests under the allowable design tensile force and tensile tests in an ambient temperature environment after heating (heating temperatures of 200–800 °C) were conducted.
Findings
The tensile strengths of the wire rope and end-connection specimens at both fire and post fire were obtained. The steel wire rope specimens possessed larger reduction factors than general hot-rolled mild steels (JIS SS400) and high-strength steel bolts (JIS F10T). The end-connection specimens with sufficient socket lengths exhibited ductile fracture of the wire rope part at both fire and post fire; however, those with short socket lengths experienced a pull-out fracture at the socket.
Originality/value
The fundamental and important tensile test results of the super high-strength steel strand wire ropes (1,570 MPa-class high-carbon steels) and wire rope open swaged socket connections were accumulated at fire and post fire, and the fracture modes were clarified. The obtained test results contribute to fire resistance performance-based design of cable steel structures at fire and fire-damage investigations to consider their reusability post fire.
Details
Keywords
Ashwani Kumar and Deepak Chhabra
This study aims to explore the potential benefits favoring the adaptation of structural optimization techniques in the additive manufacturing (AM) of medical utilities to meet the…
Abstract
Purpose
This study aims to explore the potential benefits favoring the adaptation of structural optimization techniques in the additive manufacturing (AM) of medical utilities to meet the repetitive demand for functionally precise customized orthoses. Irregularities encountered during the conventional treatment of tendon injuries can be eschewed using advanced structural simulation in design and innovative splint fabrication using 3D printing.
Design/methodology/approach
A customized mallet finger splint designed from 3D scans was subjected to ANSYS topological simulation comprising multi-level weight reduction to retain optimal mass (100%, 90%, 80%, 70% and 60%). A batch of the four typical 3D printing materials was chosen to conduct a comparative mechanical and thermal stress analysis, facilitating the selection of the optimal one for fabricating functionally adaptive splints. Assurance of structural safety was accomplished through the experimental validation of simulation results against the testing data set of ASTM D695 and ASTM D638 Type-1 specimens over a universal testing machine (UTM). Fused deposition modeling (FDM) 3D printing processed the optimized splint fabrication to assist evaluation of weight reduction percentage, fitting aesthetics, appearance, comfort, practicality and ventilation ease at the user end.
Findings
AM efficacy can efficiently execute the design complexity involved in the topology optimization (TO) results and introduces rehabilitation practicality into the application. Topologically optimized splint provided with favorable comfort, stiffness and strengthening features, offers ventilation ease and structural stability for customized appliances, with 30.52% lighter weight and 121.37% faster heat dissipation than unoptimized one.
Originality/value
The state of art multidisciplinary optimization featured with structural and material optimization attributes can deliberately meet medical necessity for performance-oriented orthotic devices.
Details
Keywords
Epoxy resins are widely used in a variety of engineering applications, including composite wind turbine blades used in the renewable energy industry, highly complex structural…
Abstract
Purpose
Epoxy resins are widely used in a variety of engineering applications, including composite wind turbine blades used in the renewable energy industry, highly complex structural components for aircraft, paints, coatings, industrial tooling, biomedical systems, adhesives, electronics and automotive. Epoxies' low fracture toughness is one of the key obstacles preventing its adoption in a wider range of applications. To address epoxy's low fracture toughness, this paper aims to examine the roles of intra-ply hybridization and nano reinforcing.
Design/methodology/approach
This paper investigates the role of intra-ply hybridization of glass-carbon woven fibers and adding 0.8 wt.% of multiwall carbon nanotube (MWCNT) nano reinforcement to overcome the low fracture toughness of epoxy. A bending test is used to calculate the composites elastic parameters, and a notched sample three-point bending test is used to show crack behavior in addition to using materials characterization methods to reveal the effect of the MWCNT on structure, bonding, glass transition temperature (Tg) and dispersion of MWCNT in the matrix. Furthermore, this paper suggests using the finite element method to overcome the difficulty in calculating the crack extension.
Findings
Intra-ply hybridization and MWCNT reinforcement decrease the crack extension of epoxy with time. The inclusion of high-strength carbon fiber increased the fracture toughness of glass composite. Furthermore, the existence of MWCNT in the surrounding area of the notch in epoxy composites hinders crack propagation and provides stiffness at the interface by bridging the crack and eventually enhancing its fracture toughness.
Originality/value
Studying the role of intra-ply hybridization of glass-carbon woven fibers and adding 0.8 wt.% of MWCNT nano reinforcement to overcome the low fracture toughness of epoxy. Additionally, this research recommends using the finite element method to overcome the challenge of computing the crack extension.
Details
Keywords
Amirul Syafiq, Lilik Jamilatul Awalin, Syukri Ali and Mohd Arif
The paper aims to design the optimum formulation of the nano-titanium dioxide (TiO2) hydrophilic coating system using the synthetic polypropylene glycol (PPG), which can create…
Abstract
Purpose
The paper aims to design the optimum formulation of the nano-titanium dioxide (TiO2) hydrophilic coating system using the synthetic polypropylene glycol (PPG), which can create the reflection and absorption property.
Design/methodology/approach
TiO2 nanoparticles are used as fillers, and PPG has been blended at the proper ratio of 1PPG: 0.2TiO2. The prepared resin has been applied onto the glass substrate at different numbers of glass immersions during the dip-coating fabrication process. One-time glass immersion is labeled as T1 coating, two-time glass immersion is labeled as T2 coating and three-time glass immersion is labeled as T3 coating. All the prepared coating systems were left dry at ambient temperature.
Findings
T3 coating showed the lowest reading of WCA value at 40.50°, due to higher surface energy at 61.73 mN/m. The T3 coating also shows the greatest absorbance property among the prepared coating systems among the prepared coating. In terms of reflectance property, the T2 coating system has great reflectance in UV region and near-infrared region, which is 16.47% and 2.77 and 2.73%, respectively. The T2 coating also has great optical transmission about 75.00% at the visible region.
Research limitations/implications
The development of thermal insulation coating by studying the relationship between convection heat and reflectance at different wavelengths of incident light.
Practical implications
The developed coating shows high potential for glass window application.
Originality/value
The application of the hydrophilic coating on light absorption, reflectance and transmission at different wavelengths.
Details
Keywords
Mohamed Badr, Maged A. Youssef, Salah El-Fitiany and Ajitanshu Vedrtnam
Understanding the structural performance of external glass curtain walls (façades) during fire exposure is critical for the safety of the occupants as their failure can lead to…
Abstract
Purpose
Understanding the structural performance of external glass curtain walls (façades) during fire exposure is critical for the safety of the occupants as their failure can lead to fire spread throughout the entire building. This concern is magnified by the recent increase in fire incidents and wildfires. This paper presents the first simplified technique to model single-skin façades during fire exposure and then utilizes it to examine the structural behaviour of vertical, inclined and oversized façade panels.
Design/methodology/approach
The proposed technique is based on conducting simplified heat transfer calculations and then utilizing a widely used structural analysis software program to analyze the façade. Validation for the proposed technique with reference to available experimental and numerical studies by others is presented. A parametric study is then conducted to assess the structural performance of different glass façade systems during exposure to fire.
Findings
The proposed technique was found to provide accurate predictions of the structural performance of glass façades during fire exposure. The structural performance of inclined façade systems during fire exposure was found to be superior to vertical and oversized façade systems.
Originality/value
This research paper is the first to provide a simplified technique that can be utilized to model single-skin facades under fire. The presented technique along with the conducted parametric study will improve the understanding of the fire behaviour of single-skin glass facades, which will lead to safer applications.
Details
Keywords
Chiara Bedon and Christian Louter
Glass material is largely used for load-bearing components in buildings. For this reason, standardized calculation methods can be used in support of safe structural design in…
Abstract
Purpose
Glass material is largely used for load-bearing components in buildings. For this reason, standardized calculation methods can be used in support of safe structural design in common loading and boundary conditions. Differing from earlier literature efforts, the present study elaborates on the load-bearing capacity, failure time and fire endurance of ordinary glass elements under fire exposure and sustained mechanical loads, with evidence of major trends in terms of loading condition and cross-sectional layout. Traditional verification approaches for glass in cold conditions (i.e. stress peak check) and fire endurance of load-bearing members (i.e. deflection and deflection rate limits) are assessed based on parametric numerical simulations.
Design/methodology/approach
The mechanical performance of structural glass elements in fire still represents an open challenge for design and vulnerability assessment. Often, special fire-resisting glass solutions are used for limited practical applications only, and ordinary soda-lime silica glass prevails in design applications for load-bearing members. Moreover, conventional recommendations and testing protocols in use for load-bearing members composed of traditional constructional materials are not already addressed for glass members. This paper elaborates on the fire endurance and failure detection methods for structural glass beams that are subjected to standard ISO time–temperature for fire exposure and in-plane bending mechanical loads. Fire endurance assessment methods are discussed with the support of Finite Element (FE) numerical analyses.
Findings
Based on extended parametric FE analyses, multiple loading, geometrical and thermo-mechanical configurations are taken into account for the analysis of simple glass elements under in-plane bending setup and fire exposure. The comparative results show that – in most of cases – thermal effects due to fire exposure have major effects on the actual load-bearing capacity of these members. Moreover, the conventional stress peak verification approach needs specific elaborations, compared to traditional calculations carried out in cold conditions.
Originality/value
The presented numerical results confirm that the fire endurance analysis of ordinary structural glass elements is a rather complex issue, due to combination of multiple aspects and influencing parameters. Besides, FE simulations can provide useful support for a local and global analysis of major degradation and damage phenomena, and thus support the definition of simple and realistic verification procedures for fire exposed glass members.
Details
Keywords
Fatemeh Mollaamin and Majid Monajjemi
Bisphosphonate (BP) medications can be applied to prohibit the damage of bone density and the remedy of bone illnesses such as osteoporosis. As the metal chelating of phosphonate…
Abstract
Purpose
Bisphosphonate (BP) medications can be applied to prohibit the damage of bone density and the remedy of bone illnesses such as osteoporosis. As the metal chelating of phosphonate groups are nearby large with six O atoms possessing the high negative charge, these compounds are active toward producing the chelated complexes through drug design method. BP agents have attracted much attention for the clinical treatment of some skeletal diseases depicted by enhancing of osteoclast-mediated bone resorption.
Design/methodology/approach
In this work, it has been accomplished the CAM-B3LYP/6–311+G(d, p)/LANL2DZ to estimate the susceptibility of SWCNT for adsorbing alendronate, ibandronate, neridronate and pamidronate chelated to two metal cations of 2Mg2+, 2Ca2+, 2Sr2+ through nuclear magnetic resonance and thermodynamic parameters. Therefore, the data has explained that the feasibility of using SWCNT and BP agents becomes the norm in metal chelating of drug delivery system which has been selected through alendronate → 2X, ibandronate → 2X, neridronate → 2X and pamidronate → 2X (X = Mg2+/Ca2+/Sr2+) complexes.
Findings
The thermodynamic results have exhibited that the substitution of 2Ca2+ cation by 2Sr2+ cation in the structure of bioactive glasses can be efficient for treating vertebral complex fractures. However, it has been observed the most fluctuation in the Gibbs free energy for BPs → 2Sr2+ at 300 K. Furthermore, Monte Carlo simulation has resulted by increasing the dielectric constant in the aqueous medium can enhance the stability and efficiency of BP drugs for preventing the loss of bone density and treating the osteoporosis.
Originality/value
According to this research, by incorporation of chelated 2Mg2+, 2Ca2+ and 2Sr2+ cations to BP drugs adsorbed onto (5, 5) armchair SWCNT, the network compaction would increase owing to the larger atomic radius of Sr2+ cation rather than Ca2+ and Mg2+, respectively.
Details
Keywords
Janset Shawash, Noor Marji and Narmeen Marji
As the Hashemite Kingdom of Jordan celebrates its first centenary, this paper presents a critical reading of the development of architecture in the Kingdom reflecting the…
Abstract
Purpose
As the Hashemite Kingdom of Jordan celebrates its first centenary, this paper presents a critical reading of the development of architecture in the Kingdom reflecting the transformation of national identity.
Design/methodology/approach
The paper achieves this aim by performing an analytical diachronic survey of the main architectural styles and trends that emerged in Jordan and links the architectural styles and trends to four main historical periods that characterize the national temporal trajectory, supported by examples of buildings, projects and architects that represent each period.
Findings
The results show the impacts of different forms of architectural modernism on local practice and explore attempts to create a national architectural identity that range in their ideological drive from Pan-Arabism to Jordanian localism.
Originality/value
The research adds to the discourse on Arab cities and architecture and shows the development of architectural trends in an Arab Muslim country, focusing on the interaction of architectural modernism with local variables. The research aims to supplement literature on Arab architecture with a critical and nuanced historical account of Jordanian architecture in the English language to serve a global audience.
Details
Keywords
The purpose of this study is to prepare Polystyrene grafted with Zeolite Y (Zeosty) for Uranyl ion [U(VI)] adsorption from aqueous solution. The adsorption mechanism has been…
Abstract
Purpose
The purpose of this study is to prepare Polystyrene grafted with Zeolite Y (Zeosty) for Uranyl ion [U(VI)] adsorption from aqueous solution. The adsorption mechanism has been explained by studying kinetic, isothermal and thermodynamic models.
Design/methodology/approach
Polystyrene was grafted with Zeosty by a simple hydrothermal technique. Zeosty was characterized by different techniques such as X-ray diffraction, scanning electron microscope, energy dispersive X-ray and Infrared spectroscopy to confirm its structure and its molecular composition. Zeosty was used for U(VI) adsorption from an aqueous solution in a series of batch experiments. The effects of pH, contact time, initial U(VI) concentration and temperature on the adsorption process were investigated.
Findings
The results showed that the adsorption of U(VI) on the prepared reached equilibrium at pH 6 with a removal efficiency of 98.9%. Adsorption kinetics and isotherms models are studied on the experimental data to estimate the mechanism of the adsorption reaction was chemisorption and homogenous reaction. The activity of Zeosty increased at high temperatures, resulting in the adsorption capacity increase. Thermodynamic parameters ΔGo, ΔHo and ΔSo indicate that the adsorption processes are spontaneous and endothermic. Zeosty has an effective surface and could be considered a valuable adsorbent for U(VI) removal from aqueous waste. A comparison study proves that the new adsorbent has high effective behavior in the adsorption process, and it is considered a new reliable adsorbent for U(VI) removal from wastewater.
Originality/value
This study is complementary to the previous study using the same technique to prove that the effective fine particle adsorbents need solid support to enhance their absorption capacities.
Details
Keywords
The purpose of this study is to look into the hygroscopic and tribo-mechanical properties of a polypropylene/polyamide-6 (PP/PA6) blend and a PP/PA6/Boron sesquioxide composite.
Abstract
Purpose
The purpose of this study is to look into the hygroscopic and tribo-mechanical properties of a polypropylene/polyamide-6 (PP/PA6) blend and a PP/PA6/Boron sesquioxide composite.
Design/methodology/approach
The hygroscopic behaviour of the PP/PA6 blend and PP/PA6/Boron sesquioxide composite was studied using a water contact angle goniometer in this study. To validate the hygroscopic behaviour of the blend and composite, water contact angles and surface energy of the materials were investigated. Tensile strength and hardness tests were used to determine mechanical characteristics, and tribological experiments on a pin-on-disc tribometer were used to demonstrate the friction and wear rates of dry and water-conditioned blends and composites. The melting temperature of dry and water-conditioned composites was determined using DSC analysis.
Findings
The hygroscopic effect of the PP/PA6 blend was found to be minimal in the experiment, while it was relatively dominating in the PP/PA6/Boron sesquioxide composite. Tensile strength was found to be somewhat lower in blend and composite compared to virgin PP, whereas hardness was found to be higher in both blend and composite. The composite’s tribological testing findings were fairly outstanding, with the coefficient of friction (COF) and wear rates significantly reduced due to boron sesquioxide reinforcement. The reaction between boron sesquioxide and water molecules produced boric acid, which increased the tribological characteristics of the composite even further. Following 30 days of water conditioning, the weight of the blend increased by 3.64% and the weight of the composite increased by 6.45% as compared to the dry materials. After water conditioning, tensile strength reduced by 0.8% for the blend and 14.16% for the composite. Hardness was determined to be the same in the dry state and after water-conditioning for blend but dropped 1% for composite. As compared to blend, the COF and wear resistance of composite were 15.52% and 25.16% higher, respectively. After absorbing some water, the results increased to 28.57% and 34.9%, respectively.
Originality/value
The mechanical and thermal behaviour of polymer composites (particularly polyamide composites) vary depending on the surrounding environment. Tests were carried out to explore the effect of water treatment on the tribo-mechanical and thermal characteristics of PP/PA6/Boron sesquioxide composite. Water treatment caused polyamides to bind with water molecules, resulting in voids in the material. The interaction between boron sesquioxide and water molecules produced boric acid, which increased the tribological characteristics of the composite.
Details