Search results

A novel low profile frequency selective surface (FSS) with a band-stop response at 10 GHz is demonstrated. The purpose of this designed FSS structure is to reject the X-band (8-12 GHz) for the application of shielding. The proposed FSS structure having the unit cell dimension of 8 × 8 mm², the miniaturization of the FSS unit cell in terms of λ₀ is 0.266 λ₀ × 0.266 λ₀, where λ₀ is free space wavelength. The designed FSS provides 4 GHz bandwidth with insertion loss of 15 dB. The transverse electric (TE) and transverse magnetic (TM) modes of the proposed design are same because of polarization independent characteristics and hold the angularly stable frequency response for both TE and TM mode polarization. Both the simulation and measurement results are in good agreement to each other.

The proposed FSS design contains square-shaped PEC material, which is placed on the substrate and the shape of the circle and rectangle is etched over the PEC material. The PEC material of the patch dimension is 0.0175 mm. The substrate used for the proposed design is FR4 lossy with the thickness of 0.8 mm and permittivity εr = 4.3 having a loss tangent of 0.02.

To find a new design and miniaturized FSS structure is discussed.

100%

Analysis of the frequency selective surface (FSS) is of great significance. In the method of moments, when the electric size of the FSS increases, huge in-core memory and CPU time are required. The purpose of this paper is to efficiently analyze the finite FSS backed by dielectric substrate utilizing sub-entire-domain (SED) basis function method.

Different types of SED basis functions are generated according to the locations of the cells in the entire structure, and a reduced system is constructed and solved. The couplings of all cells of the FSS are taken into account by using Green’s function and Galerkin’s test procedure. The spatial Green’s function is obtained with the discrete complex image method. The reflection and transmission coefficients of the FSS are calculated using the far field of the FSS and the metallic plate with the same size.

Moderate problems of the finite FSS backed by dielectric substrate are solved with the SED basis function method. The original problem can be simplified to two smaller problems. It enables a significant reduction to the matrix size and storage, and efficient analysis of FSS can be performed. The band-stop type of FSS can be composed of periodic conductive patch cells on the dielectric substrate, and shows total reflection property at the resonant frequency.

The SED basis function method is mostly used to analyze periodic PEC structures in free space. The layered medium Green’s function is successfully employed and several dielectric substrate backed finite FSSs are discussed in this paper. The calculation of reflection and transmission coefficients, which are more effective rather than far field scattering of the FSS, are described.

In this article, the authors intended to analyze the shielding properties of a fabric frequency selective surface (FSS) structure to the basis of substrate fabric properties. For this purpose, the effect of the properties and structural parameters of the substrate fabric layer were analyzed on the shielding properties of the developed FSS.

The experimental and theoretical evaluations were done at the frequency band of 1,805–1,880 MHz and computer simulation technology (CST) was used in modeling. In experiments were developed the FSS structures by different fabrics as the substrate layers and the copper as the patch cells. The shielding properties of these samples were measured experimentally by the developed setup.

Confirming resonant frequencies, transmission coefficients, and the bandwidths results obtained from modeling and experiments show that the thickness, weight and interweaving structure parameters were affect the porosity of the substrate fabric. Porosity of the fabric moves the resonant frequency due to the changing of the dielectric properties of the fabric. Therefore, shielding properties of the FSS structure were affected by these parameters as the important characteristics of the substrate fabric. In addition, shielding properties of the samples (resonant frequencies and transmission coefficients) in different incident angles are not same in two modes of transverse electric and transfer magnetic.

The experimental results suggest that the introduced flexible FSS structures are suitable for shielding applications in the proposed frequency band.

The purpose of this paper is to analyze far and near field emitted field patterns through more exact calculation of the modes formed in finite periodic dielectric gratings.

For the mode calculation, equations are newly defined by applying vertical boundary condition on the assumption that transverse electric modes are generated in the structure. After finding modes, near field patterns are calculated using the wave number and coefficient of the mode.

Additionally, the results from these calculations are compared with that of the rigorous-coupled method. Finally, far field patterns are derived by applying fast Fourier transform to near field patterns and also compared with the results of rigorous-coupled method.

For convenience of coordinate, we use rectangular coordinate, though the shape of radome is a hemisphere.

In this paper, the authors derive more exact near field patterns without the assumption of infiniteness so that these results can be used practically for a making real frequency-selective structure.

Conventional periodic finite dielectric gratings analysis has been done using Floquet–Bloch wave theory, coupled-mode, rigorous-coupled method which is based on the assumption of infiniteness of the structure.

Millimeter wave spectrum represents new opportunities to add capacity and faster speeds for next-generation services as fifth generation (5G) applications. In its Spectrum Frontiers proceeding, the Federal Communications Commision decided to focus on spectrum bands where the most spectrums are potentially available. A low profile antenna array with new decoupling structure is proposed and expected to resonate at higher frequency bands, i.e. millimeter wave frequencies, which are suitable for 5G applications.

The presented antenna contains artificial magnetic conductor (AMC) surface as decoupling structure. The proposed antenna array with novel AMC surface is operating at 29.1GHz and proven to be decoupling structure and capable of enhancing the isolation by reducing mutual coupling as 8.7dB between the array elements. It is evident that, and overall gain is improved as 10.1% by incorporating 1x2 Array with AMC Method. Mutual coupling between the elements of 1 × 2 antenna array is decreased by 39.12%.

The proposed structure is designed and simulated using HFSS software and the results are obtained in terms of return loss, gain, voltage standing wave ratio (VSWR) and mutual coupling. The S-Parameters of each stage of design is tabulated and compared with each other to prove the decoupling capability of AMC surface in antenna arrays.

The proposed structure is designed and simulated using HFSS software, and the results are obtained in terms of return loss, gain, VSWR and mutual coupling. The S-Parameters of each stage of design is tabulated and compared with each other to prove the decoupling capability of AMC surface in antenna arrays.

The aim of this study is to determine the fracture behavior of wool felt and fabric based epoxy composites and their responses to electromagnetic waves.

Notched and unnotched tensile tests of composites made of wool only and hybridized with a glass fiber layer were carried out, and fracture behavior and toughness at macro scale were determined. They were exposed to electromagnetic waves between 8 and 18 GHz frequencies using two horn antennas.

The keratin and lignin layer on the surface of the wool felt caused lower values to be obtained compared to the mechanical values given by pure epoxy. However, the use of wool felt in the symmetry layer of the laminated composite material provided higher mechanical values than the composite with glass fiber in the symmetry layer due to the mechanical interlocking it created. The use of wool in fabric form resulted in an increase in the modulus of elasticity, but no change in fracture toughness was observed. As a result of the electromagnetic analysis, it was also seen in the electromagnetic analysis that the transmittance of the materials was high, and the reflectance was low throughout the applied frequency range. Hence, it was concluded that all of the manufactured materials could be used as radome material over a wide band.

Sheep wool is an easy-to-supply and low-cost material. In this paper, it is presented that sheep wool can be evaluated as a biocomposite material and used for radome applications.

The combined evaluation of felt and fabric forms of a natural and inexpensive reinforcing element such as sheep wool and the combined evaluation of fracture mechanics and electromagnetic absorption properties will contribute to the evaluation of biocomposites in aviation.

Propagation characteristics of millimeter wave (mmW) frequencies that are being explored for implementing 5G network are quite different from sub 3GHz frequencies in which 4G network is operating, and hence antenna design for mmW 5G network is going to be significantly different. The purpose of this paper is to bring forth the unique challenges and opportunities of planar antenna design for mmW 5G network.

A lot of notable contemporary work has been investigated for this study and reported in this paper. A comparison of 4G and 5G technologies has been carried out to understand the difference between the air interface of two technologies that governs the antenna design. Important research gaps found after collating the work already done in the field have been bullet pointed for the use by many researchers working in this direction.

Several antenna design considerations have been laid out by the authors of this work, and it has been claimed that mmW 5G antenna design must satisfy these design considerations. In addition, prominent research gaps have been identified and thoroughly discussed.

As research in the field of mmW antenna design for 5G applications is still evolving, a lot of work is currently being done in this area. This study can prove to be important in understanding different challenges, opportunities and current state-of-art in the field of mmW planar antenna design for 5G cellular communication.

The suggested work examines the latest developments such as the techniques employed for allocation of power, browser techniques, modern analysis and bandwidth efficiency of nonorthogonal multiple accesses (NOMA) in the network of 5G. Furthermore, the proposed work also illustrates the performance of NOMA when it is combined with various techniques of wireless communication namely network coding, multiple-input multiple-output (MIMO), space-time coding, collective communications, as well as many more. In the case of the MIMO system, the proposed research work specifically deals with a less complex recursive linear minimum mean square error (LMMSE) multiuser detector along with NOMA (MIMO-NOMA); here the multiple-antenna base station (BS) and multiple single-antenna users interact with each other instantaneously. Although LMMSE is a linear detector with a low intricacy, it performs poorly in multiuser identification because of the incompatibility between LMMSE identification and multiuser decoding. Thus, to obtain a desirable iterative identification rate, the proposed research work presents matching constraints among the decoders and identifiers of MIMO-NOMA.

To improve the performance in 5G technologies as well as in cellular communication, the NOMA technique is employed and contemplated as one of the best methodologies for accessing radio. The above-stated technique offers several advantages such as enhanced spectrum performance in contrast to the high-capacity orthogonal multiple access (OMA) approach that is also known as orthogonal frequency division multiple access (OFDMA). Code and power domain are some of the categories of the NOMA technique. The suggested research work mainly concentrates on the technique of NOMA, which is based on the power domain. This approach correspondingly makes use of superposition coding (SC) as well as successive interference cancellation (SIC) at source and recipient. For the fifth-generation applications, the network-level, as well as user-experienced data rate prerequisites, are successfully illustrated by various researchers.

The suggested combined methodology such as MIMO-NOMA demonstrates a synchronized iterative LMMSE system that can accomplish the optimized efficiency of symmetric MIMO NOMA with several users. To transmit the information from sender to the receiver, hybrid methodologies are confined to 2 × 2 as well as 4 × 4 antenna arrays, and thereby parameters such as PAPR, BER, SNR are analyzed and efficiency for various modulation strategies such as BPSK and QAM_j (j should vary from 8,16,32,64) are computed.

The proposed hybrid MIMO-NOMA methodologies are synchronized in terms of iterative process for optimization of LMMSE that can accomplish the optimized efficiency of symmetric for several users under different noisy conditions. From the obtained simulated results, it is found, there are 18%, 23% 16%, and 8% improvement in terms of Bit Error Rate (BER), Least Minimum Mean Squared Error (LMMSE), Peak to Average Power Ratio (PAPR), and capacity of channel respectively for Binary Phase Shift Key (BPSK) and Quadrature Amplitude Modulation (QAM) modulation techniques.

The purpose of this paper is to investigate cotton fabric behavior that is exposed to radar waves between selected operation frequencies as an alternative radar-absorbing material (RAM) response. Cotton fabric biocomposite materials were compared with carbon fabric composite materials, which are good absorbers, in terms of mechanical and electromagnetic (EM) properties for that purpose.

The laminated composite plates were manufactured by using a vacuum infusion process. The EM tests were experimentally performed with a vector network analyzer to measure reflection, transmission and absorption ability of cotton fabric, carbon fabric and cotton–carbon fabric (side by side) composite plates between 3 and 18 GHz. The tensile and low-velocity impact tests were carried out to compare the mechanical properties of cotton fabric and carbon fabric composite plates. A scanning electron microscope was used for viewing the topographical features of fracture surfaces.

The cotton fabric composite plate exhibits low mechanical values, but it gives higher EM wave absorption values than the carbon fabric composite plate in certain frequency ranges. Comparing the EM absorption properties of the combination of cotton and carbon composites with those of the carbon composite alone, it appears that the cotton–carbon combination can be considered as a better absorber than the carbon composite in a frequency range from 12 to 18 GHz at Ku band.

This paper shows how cotton, which is a natural and easily supplied low-cost raw material, can be evaluated as a RAM.

The purpose of this paper is to conduct the accurate analysis and systematic characterisation of realistic generalised bi‐isotropic and lossy chiral metamaterial 3D applications at microwave frequencies.

An accuracy‐adjustable time‐domain methodology is developed. The technique uses a convex combination of optimal stencils along with an advanced wavefield decomposition to precisely model the highly dispersive, double negative nature of chirality and constitutive parameters. Furthermore, open‐region radiation or scattering problems are terminated through a pertinently modified perfectly matched layer (PML) of variable depth.

The paper reveals that the proposed algorithm is versatile in the generation of adaptive stencils that attain a very natural way of manipulating continuity conditions at material interfaces. Thus, when periodic structures with split‐ring resonators are to be modelled, the resulting schemes attain optimal precision and minimised dispersion errors. Numerical validation proves these merits via diverse demanding structures of curved shape and multiple layers.

The new technique introduces a family of piecewise polynomials and spatial discretization criteria which lead to additional degrees of freedom for the discrete vectors of the application. In this manner, grid dual is intrinsically embedded in the physical profile of the problem, without resorting to the simplified conventions of other approaches. Moreover, singularity points or demanding geometric discontinuities are properly manipulated, even via coarse lattice resolutions. Thus, the overall accuracy is significantly improved and the computational requirements remain in very logical and affordable levels.