Search results

The purpose of this study is to prepare a state-of-the-art review on advanced ceramic materials including their fabrication techniques, characteristics, applications and wettability.

This review paper presents the various types of advanced ceramic materials according to their compounding elements, fabrication techniques of advanced ceramic powders as well as their consolidation, their characteristics, applications and wetting properties. Hydrophobic/hydrophilic properties of advanced ceramic materials are described in the paper with their state-of-the-art application areas. Optical properties of fine ceramics with their intrinsic characteristics are also presented within. Special focus is given to the brief description of application-based manipulation of wetting properties of advanced ceramics in the paper.

The study of wetting/hydrophobicity/hydrophilicity of ceramic materials is important by which it can be further modified to achieve the required applications. It also makes some sense that the material should be tested for its wetting properties when it is going to be used in some important applications like biomedical and dental. Also, these advanced ceramics are now often used in the fabrication of filters and membranes to purify liquid/water so the study of wetting characteristics of these materials becomes essential. The optical properties of advanced ceramics are equally making them suitable for many state-of-the-art applications. Dental, medical, imaging and electronics are the few sectors that use advanced ceramics for their optical properties.

This review paper includes various advanced ceramic materials according to their compounding elements, different fabrication techniques of powders and their consolidation, their characteristics, various application area and hydrophobic/hydrophilic properties.

Reviews the inherent advantages, i.e. design flexibility and processing, of manufacturing piezoelectric ceramics and composites with numerous architectures via rapid prototyping techniques. Reports on processing in which piezoelectric ceramics and composites with novel and conventional designs were fabricated using rapid prototyping techniques. Fused deposition of ceramics, fused deposition modeling, and Sanders prototyping techniques were used to fabricate lead‐zirconate‐titanate ceramics and ceramic/polymer composites via, first, direct fabrication and, second, indirect fabrication using either lost mold or soft tooling techniques.

The aim of this paper is to provide an easy method of extrusion freeforming to fabricate microwave electromagnetic bandgap (EBG) crystals. EBG crystals are periodic dielectric structures that can block wave propagation and generate a bandgap. These crystals can be used in high capability antennae, electromagnetic wave semiconductors, microresonators, high‐reflectivity mirrors and polarizing beam splitters.

The effects of extrusion process parameters and paste characteristics were investigated. Finally, one‐period and two‐period woodpile EBG crystals with bandgaps in the frequency region of 90‐110 GHz were fabricated and the bandgap was measured.

The filament diameter is influenced by whether extrusion is carried out with or without a substrate and by the free fall‐distance from the nozzle. The quality of lattice structures is dependent on paste flow and properties. A ceramic paste with 60 vol. % (the fraction of ceramic powder based on solvent‐free polymer) was well suited to fabrication. The solvent content also influenced the fabrication. The experimental results show that under ∼12 per cent solvent mass fraction in the paste and relatively high extrusion ram velocity (more than 0.014 mm/s) at a pressure of 14 MPa, samples with high quality were fabricated.

This paper demonstrates that the rapid prototyping method of extrusion freeforming can be applied for the fabrication of EBG crystals from ceramic powders and the important factors which influence the product quality are identified.

This paper aims to analyse the behaviour of dune sand mortars with the addition of ceramic waste. The objective of improving the performance of these modified mortars was evaluated in terms of accelerated carbonation performance.

The effect of these recycled materials was studied in an experimental programme through several tests. The carbonation depth was determined using a classical phenolphthalein test. The mass fractions of Ca(OH)₂ and CaCO₃ were calculated using thermogravimetric analysis, water absorption occurring through capillary action and open porosity, and the mechanical characteristics were measured after subjecting the materials to wetting–drying cycles.

The results show that using ceramic waste provides better performance in terms of water absorption by capillary action, open porosity and carbonation penetration.

This research is a study of the incorporation of ceramic waste up to 10 per cent in dune sand mortar. The choice of using ceramic waste to produce dune sand mortars has benefits from economic, environmental and technical points of view and offers a possibility for improving the durability of mortars.

This paper gives a bibliographical review of the finite element methods (FEMs) applied to the analysis of ceramics and glass materials. The bibliography at the end of the paper contains references to papers, conference proceedings and theses/dissertations on the subject that were published between 1977‐1998. The following topics are included: ceramics – material and mechanical properties in general, ceramic coatings and joining problems, ceramic composites, ferrites, piezoceramics, ceramic tools and machining, material processing simulations, fracture mechanics and damage, applications of ceramic/composites in engineering; glass – material and mechanical properties in general, glass fiber composites, material processing simulations, fracture mechanics and damage, and applications of glasses in engineering.

LOVASCO.F. and OIEN.M.A., IPC Technical Review, Vol. 31, No. 1, p. 18, December (1989)/January (1990) A new area‐distributed surface‐mount technology has been developed at AT&T Bell Laboratories that is suitable for the solder assembly of VLSI packages onto printed circuit boards. This new ‘double‐bump’ technology entails the controlled overlapping of two molten solder‐bumps on both package and substrate to form a nearly cylindrical joint. A mechanical stand‐off is used to control the final separation between the 1C package and the printed circuit board, and hence the solder joint height and shape. A simple analytical model has been developed which provides a good understanding of the solder joint geometries which are achievable and how the joint geometry is influenced by the principal design and process parameters. This new assembly technology offers several advantages. It is an evolutionary development of the well established solder‐bump technology but it provides a column‐like joint geometry and thus offers a potential for better reliability and higher density. It provides a large process window because it allows for the inspection of wettability of package and substrate before assembly, and the assembly process itself involves the melting together of two molten solder surfaces. Finally, it offers the potential for the electrical inspection of hidden solder joints.

Contrary to its conspicuous achievement as an industrial society, Japan has been experiencing long lasting economic stagnation due to a paradigm shift toward an information society that emerged in the 1990s. This contraction can be attributed to the shift from a growth‐oriented trajectory in an industrial society to a functionality‐oriented trajectory in an information society. However, a noteworthy surge in new innovation in Japan has been observed in recent years in the leading edge innovation challenge in the Japanese manufacturing industry. This trend can largely be attributed to effective assimilation of cross‐functional spillover in an indigenous growth‐oriented trajectory. Thus, elucidation of the inside of the black box of cross‐functional spillover has become a crucially important issue for Japan’s shift to a functionality‐oriented trajectory. Constructive suggestions for this elucidation can be observed in the shifting dynamism from structural‐materials to functional‐materials in the area of certain fine ceramics. This dynamism is based on effective assmilation of cross‐functional spillover and can provide a significant insight for the foregoing elucidation. Prompted by this postulate, this paper attempts to analyze spillover dynamism in fine ceramics and to extract constructive suggestions suggestive to Japan’s shift from a growth‐oriented trajectory to a functionality‐oriented trajectory.

The review glances upon the colorants used for printing on ceramic substrates by ink jet technology and techniques, chemistry involved during the selection of the colorants.

The ink jet technology is an easy and a convenient technique, specially designed colorants are used for such applications with tailor made properties and features.

New developments in technology and chemistry of colorants to achieve successes in application studies of ceramic substrates.

N/A.

This review glances upon the history, development and practical approach of the current techniques with available dyes and pigments and the techniques involved during the synthesis and application.

The review paper provides information about the development of the inkjet technique on ceramics and available colorants with methods.

This paper aims to provide a review on the process of additive manufacturing of ceramic materials, focusing on partial and full melting of ceramic powder by a high-energy laser beam without the use of binders.

Selective laser sintering or melting (SLS/SLM) techniques are first introduced, followed by analysis of results from silica (SiO₂), zirconia (ZrO₂) and ceramic-reinforced metal matrix composites processed by direct laser sintering and melting.

At the current state of technology, it is still a challenge to fabricate dense ceramic components directly using SLS/SLM. Critical challenges encountered during direct laser melting of ceramic will be discussed, including deposition of ceramic powder layer, interaction between laser and powder particles, dynamic melting and consolidation mechanism of the process and the presence of residual stresses in ceramics processed via SLS/SLM.

Despite the challenges, SLS/SLM still has the potential in fabrication of ceramics. Additional research is needed to understand and establish the optimal interaction between the laser beam and ceramic powder bed for full density part fabrication. Looking into the future, other melting-based techniques for ceramic and composites are presented, along with their potential applications.

Commercial solid freeform fabrication (SFF) systems, which have been developed for fabrication of wax and polymer parts for form and fit and secondary applications, such as moulds for casting, etc., require further improvements for use in direct processing of structural ceramic and metal parts. Defects, both surface as well as internal, are undesirable in SFF processed ceramic and metal parts for structural and functional applications. Process improvements are needed before any SFF technique can successfully be commercialized for structural ceramic and metal processing. Describes process improvements made in new SFF techniques, called fused deposition of ceramics (FDC) and metals (FDMet), for fabrication of structural and functional ceramic and metal parts. They are based on an existing SFF technique, fused deposition modelling (FDM) and use commercial FDM systems. The current state of SFF technology and commercial FDM systems results in parts with several surface and internal defects which, if not eliminated, severely limit the structural properties of ceramic and metal parts thus produced. Describes systematically, in detail, the nature of these defects and their origins. Discusses several novel strategies for elimination of most of these defects. Shows how some of these strategies have successfully been implemented to result in ceramic parts with structural properties comparable to those obtained in conventionally processed ceramics.