Search results

The British Library Bibliographic Services Division (BLBSD) has now announced details of its plans for taking its automated services into the next decade. It has acquired two software packages — the WLN system and BRS/SEARCH — which will form the cornerstones of an evolutionary development strategy. Readers will no doubt be aware that the search for new software to replace existing BLAISE systems has been underway for the past two to three years. This new development — until now popularly referred to as BLAISE‐LINE 2 — has been re‐christened “BLAISE SYSTEM 2” or “BS2” for short since its eventual scope is a good deal wider than that of the present BLAISE‐LINE service.

The purpose of this study is to understand the functional power of frequency from-to chart (FFTC) as an independent solution-key for generation optimal (exact) facilities sequences with an equal distance of straight-line flow patterns. The paper will propose a bi-objective function model based on the Torque Method then will turn it into a computer-based technique with a permutative manner using the full enumeration method. This model aims to figure out if there is a difference between the moment minimization and backtracking treatment. Furthermore, the proposed technique will measure the performance of related works from literature to numerically highlight their limitations.

The literature of related works provided two-principles assumed mastering material flow sequences. The researchers gathered and analyzed the three methods – used FFTC as an independent technique – mentioned in the literature then measured their performance with the proposed technique. The proposed technique is based on the computation of torque value using an enhancement of bi-objective function model then application a permutative approach with full enumeration methodology. The bi-objective function model used once to mimic the grand moment value of FFTC and again to study the reflection of minimizing the congestion of backtracking movements on the minimization of total transportation cost.

Based on the analysis of literature and comparative results of its three case studies using the proposed technique, it is found that: there are optimum facilities sequences with rich opportunities of exact pathway selection. Reduction methodology is an inefficient way to generate exact results. There is a gap between combining the minimization of the grand moment and the treatment of the backtracking problem.

This study is one of the first contributions that discusses the assumption of integration between optimization moment value and its relation to treatment backtracking problem. Also, the illness of reduction methodology to reach optimal solutions. The further direction of this research will highlight the conjecture of searching the exact results for small size problems, analyzing the given data and its logical dimensions, developing logical rules for solving and verifying large size problems based on the exact results (The conjecture of P = NP).

This paper provides a detailed numerical analysis of the most common problems generally faced facility layout problems through understanding the lack of integration between moment minimization and backtracking minimization. Also, the inefficiency of reliance on reduction methodology either in scores of frequencies between facilities with weak relation or the number of permutations. Based on those findings, further study will search the logical philosophy exactly optimizing FFTC manually or without having to deal with a permutative approach for large size problems – which considered non-deterministic polynomial-time problem.

This paper deals with the organizing of interactive product development. Developing products in interaction between firms may provide benefits in terms of specialization, increased innovation, and possibilities to perform development activities in parallel. However, the differentiation of product development among a number of firms also implies that various dependencies need to be dealt with across firm boundaries. How dependencies may be dealt with across firms is related to how product development is organized. The purpose of the paper is to explore dependencies and how interactive product development may be organized with regard to these dependencies.

The analytical framework is based on the industrial network approach, and deals with the development of products in terms of adaptation and combination of heterogeneous resources. There are dependencies between resources, that is, they are embedded, implying that no resource can be developed in isolation. The characteristics of and dependencies related to four main categories of resources (products, production facilities, business units and business relationships) provide a basis for analyzing the organizing of interactive product development.

Three in-depth case studies are used to explore the organizing of interactive product development with regard to dependencies. The first two cases are based on the development of the electrical system and the seats for Volvo’s large car platform (P2), performed in interaction with Delphi and Lear respectively. The third case is based on the interaction between Scania and Dayco/DFC Tech for the development of various pipes and hoses for a new truck model.

The analysis is focused on what different dependencies the firms considered and dealt with, and how product development was organized with regard to these dependencies. It is concluded that there is a complex and dynamic pattern of dependencies that reaches far beyond the developed product as well as beyond individual business units. To deal with these dependencies, development may be organized in teams where several business units are represented. This enables interaction between different business units’ resource collections, which is important for resource adaptation as well as for innovation. The delimiting and relating functions of the team boundary are elaborated upon and it is argued that also teams may be regarded as actors. It is also concluded that a modular product structure may entail a modular organization with regard to the teams, though, interaction between business units and teams is needed. A strong connection between the technical structure and the organizational structure is identified and it is concluded that policies regarding the technical structure (e.g. concerning “carry-over”) cannot be separated from the management of the organizational structure (e.g. the supplier structure). The organizing of product development is in itself a complex and dynamic task that needs to be subject to interaction between business units.

Using the weighted similarity coefficient (WSC) technique in the design of manufacturing facilities provides the system designer with a suitable method for the creation of efficient manufacturing cells. The formation of such well designed machine cells will then hopefully ensure that the achievable cost reduction benefits, in terms of lower operational costs incurred via the transfer of components between machines, are obtained by companies that wish to use cellular manufacturing in their approach to production operations. The aim of this paper is to outline and evaluate the application of a particular WSC equation to the formulation and design of cellular manufacturing systems.

By using a pragmatic approach, the paper chronicles the design and development of a particular weighted similarity coefficient as a means of defining a possibly useful methodology for cell design in manufacturing systems. The technique outlined is subsequently evaluated for its generic nature, applicability and effectiveness via the use of previously published synthetic production data and a comparison with the results of several alternative approaches.

The development of the proposed weighted similarity coefficient to manufacturing cellular design is outlined in the paper and the appropriateness of the technique is subsequently evaluated in order that the benefits obtainable by its use to a host organisation are highlighted. In addition, the results show how the approach can lead to useful improvements in cellular manufacturing performance if adopted by manufacturing system designers and implemented in their designs.

The design, development and application of the WSC proposed and its use in manufacturing cellular design provides a simple yet highly effective approach to achieving useful improvements in production system performance through improved work‐part transfer efficiency and associated cost savings. The paper offers practising manufacturing managers and engineers a technique whereby manufacturing cell productive efficiency and output can be improved whilst at the same time achieving a reduction in operational costs.

The paper focuses on the proposed WSC technique which contributes to the existing knowledge base on production cell design and may also provide impetus, guidance, support and encouragement for designers to achieve improved output performance and reduced costs in their manufacturing system designs.

The purpose of this paper is to discuss a practical approach taken by utilizing the non‐conformance/event management and failure investigation (FI) system to formally troubleshoot an actual process failure observed in the sequencing facility.

In this study the authors describe how the cause for the poor quality sequence data, as indicated from the quality score, involving high molecular weight follicular lymphoma DNA samples for a study of tumor‐associated genome rearrangements was successfully identified and confirmed through the application of a well structured FI process.

Through this FI process the underlying causes were effectively identified, immediate corrective actions were executed and a preventative action to avoid or minimize reoccurrences was also implemented and monitored for effectiveness.

This paper establishes that by applying a systematic, documented FI process the underlying causes of a process failure in an organization can be effectively identified and appropriate corrective and preventative actions can be successfully adopted.

The purpose of this article is to develop a bi-directional relaxed flexible bay structure (BRFBS) in the layout for the unequal area facility layout problems (UA-FLPs) and test the suitability of the proposed approach using literature data.

This research adopts a two-stage solution approach for UA-FLPs to form BRFBS in the layout. The solution to UA-FLPs is carried out in discrete space. The proposed heuristic method optimises the layout plan for minimising the material handling cost (MHC), and also, it indirectly optimises the space utilisation by reducing the empty space in the layout. The first stage of layout design assumes that all facilities are equal in size and uses quadratic assignment problem (QAP) model. QAP is solved with a simulated annealing heuristic method. In the second stage, a heuristic method is proposed to find the optimum width for each bay and the dimension for facilities. The proposed heuristic method is tested with numerical data available in the literature. Results are compared with the results obtained by layout planning software, and with the simulated annealing algorithm for flexible bay structure (SA-FBS) heuristic procedure for continuous space UA-FLPs.

The proposed two-stage solution approach gives the BRFBS for the UA-FLPs. BRFBS helps to create proper aisle structure in the layout plan. The layout configuration and solution of the proposed method is better than the layout planning software solution and SA-FBS solution. The application of the proposed heuristic method to case data gave lesser MHC, better space utilisation and better aisle formation than the existing layout.

The proposed approach has the limitation that it can be applied only to UA-FLPs solved in discrete space. When the UA-FLPs are solved in continuous space, then it is not possible to make application of this approach to form bi-directional relaxed flexible bays in the layout plan.

Most of the modern industries are automated, and they use material handling equipment (MHE) like automated guided vehicles (AGVs). Design of layout plans that help to create proper aisle structure for AGV’s in the layout plan is a challenging to the researchers. The BRFBS configuration is more suitable in the flexible manufacturing system where AGVs are used for material transportation.

This paper proposes a novel two-stage heuristic method for solving the UA-FLPs in discrete space. The proposed approach generates a BRFBS in the layout plan. The BRFBS helps to create a proper aisle structure suitable for better material handling operations. Hence, this type of layout helps in easy interaction of the MHE (e.g. AGVs) with the boundaries of the facilities touching the aisle.

A review was carried out of the ‘information landscape’ within the pharmaceuticals‐based molecular biology community, which examined the research problems requiring biological‐sequence data, important sources of information, methods of access, information‐seeking behaviour of end users and the role of libraries and information centres. This work concentrated on the practical aspects of how biological sequence information is managed and used in a research setting and was carried out as part of the MSc in Information Science at the City University. Fifteen questionnaires were sent to information scientists in the UK pharmaceutical industry and a user study was carried out amongst scientists at Celltech. Most of the important primary data are available freely or cheaply via the Internet and molecular biologists were found to be self‐reliant in their use of these resources. Currency of information was found to be very important in the research process and the issue of Internet security was taken very seriously. Most questionnaire respondents saw a productive role in the future for information workers in the field of molecular biology, citing end‐user training and data integration as possible roles, although the degree of involvement will depend on the particular mix of skills and experience that exist within an information department.

Motivated by a problem in the context of DiDi Travel, the biggest taxi hailing platform in China, the purpose of this paper is to propose a novel facility location problem, specifically, the single source capacitated facility location problem with regional demand and time constraints, to help improve overall transportation efficiency and cost.

This study develops a mathematical programming model, considering regional demand and time constraints. A novel two-stage neighborhood search heuristic algorithm is proposed and applied to solve instances based on data sets published by DiDi Travel.

The results of this study show that the model is adequate since new characteristics of demand can be deduced from large vehicle trajectory data sets. The proposed algorithm is effective and efficient on small and medium as well as large instances. The research also solves and presents a real instance in the urban area of Chengdu, China, with up to 30 facilities and demand deduced from 16m taxi trajectory data records covering around 16,000 drivers.

This study examines an offline and single-period case of the problem. It does not consider multi-period or online cases with uncertainties, where decision makers need to dynamically remove out-of-service stations and add other stations to the selected group.

Prior studies have been quite limited. They have not yet considered demand in the form of vehicle trajectory data in facility location problems. This study takes into account new characteristics of demand, regional and time constrained, and proposes a new variant and its solution approach.

The purpose of this paper is to re‐examine the solution methodology to the facility grouping problem in group technology originally outlined by Mukhopadhyay et al. The aim of this re‐examination is to attempt to resolve some of the problems associated with the original solution methodology and to provide the system designer with an improved technique for the creation of an efficient initial system design solution. Cellular manufacture by its very nature requires work‐part transfer both within a machine cell and in some instances between machine cells. By utilising a design methodology which seeks to minimise work‐part transfer, these non‐value but cost adding tasks are kept to a minimum, thereby providing a faster throughput time and lower operational costs for companies who use cellular manufacturing systems in their production operations.

In approach, the technique advocated parallels the possible alternative solution method suggested by John et al. to resolve the problem of edge ranking ties which exists in the original Mukhopadhyay et al. solution technique. Presented and discussed in this contribution is a revised flow direction weighting scheme (FDWS) which simplifies the solution input data requirements and overcomes a perceived disadvantage in the earlier scheme outlined by John et al. The methodology outlined in the paper is subsequently evaluated for its generic nature, applicability and effectiveness via the use of previously published synthetic production data, and the findings compared to the results determined by several alternative approaches to the problem.

The development and application of the FDWS to cellular manufacturing system design is outlined in the paper and the usefulness of the technique is subsequently examined and compared to the results found for several competing methods. The approach provides for the identification of improved solutions to the test problems examined in both of the earlier contributions by Mukhopadhyay et al., and John et al. In addition, the results show that irrespective of the assessment criteria used, the FDWS technique provides solutions that are comparable to or better than the alternative approaches examined.

The proposed FDWS technique further contributes to the existing knowledge base on cellular manufacturing system design. It can provide good initial solution guidance for manufacturing system designers and thereby reduce the time required to achieve an acceptable and cost efficient design for a cellular production system.

This paper aims to illustrate relationships between stakeholders in the conceptualisation and implementation of water and sanitation services (WSS) projects in marginalised settings of Nairobi and Kiambu Counties. It outlines these relationships in a flow diagram that shows a pathway analysis in which social innovation strategies are used as markers in the program of inclusive water provision. The study’s objective is to map the processes of social innovation in an effort to highlight the role of marginalised communities in their access to the right to water.

The paper approached the study using a case study design, and thereafter, constructivist grounded theory was used to further delve into the comparative cases. To map the processes of social innovation, the case study design was seen to be appropriate, as it sequenced activities in a time-series analysis. From these two case studies, four comparative cases were used to pinpoint path-breaking transition in the pathway analysis. The methods used in both phases were, namely, in-depth interviews, observations and document analysis, and these were complemented by field notes.

The paper indicates an opportunity to use emergent patterns for a more context-specific analysis of WSS projects in marginalised communities. It advances the role of marginalised communities as vital stakeholders in the approach described as “the right to the city”. The model of spatial appropriation brings to the fore the binary yet separate processes that stakeholders engage in.

Owing to the use of a grounded theory model, the results may not be transferable to other contexts. Therefore, further testing of the proposed pathway analysis and model is encouraged, as this model suggests ways of ensuring full community engagement which would result in greater success in projects involving marginalised communities.

The paper has implications for both the government and communities, in that more deliberate roles for the community-based organisation in the conceptualisation of WSS projects can lead to social learning opportunities for government institutions and greater success in implementation.

The paper justifies the need for government institutions to map and evaluate WSS projects using emergent patterns to highlight the role of marginalised communities as their right to the city.