Search results

This paper aims to promote the higher quality development of high-tech enterprises in China. While science and technology have greatly promoted human civilization, resources have been excessively consumed and the environment has been sharply polluted. Therefore, it is particularly important for current enterprises to make use of scientific and technological innovation to maximize the benefits of mankind, minimize the loss of nature, and promote the sustainable development of our country.

By using DEA-Banker-Charnes-Cooper (BCC) model and DEA-Malmquist model, this paper comprehensively examines the innovation efficiency of high-tech enterprises from both static and dynamic perspectives, and conducts a provincial comparative study with the panel data of ten representative provinces from 2011 to 2020.

The research findings are as follows: the rapid number increase of high-tech enterprises in most provinces (cities) is accompanied by an ineffective input–output efficiency; the quality of high-tech enterprises needs to comprehensively examine both input–output efficiency and total factor productivity; and there is not a positive correlation between element investment and innovation performance.

Because the DEA model used in this paper assumes that the improvement direction of invalid units is to ensure that the input ratio of various production factors remains unchanged but sometimes the proportion of scientific and technological activities personnel and the total research and development investment is not constant. In the future, the nonradial DEA model can be considered for further research. Due to historical data statistics, more provinces, cities and longer panel data are difficult to obtain. The samples studied in this paper mainly refer to the provinces and cities that ranked first in the number of national high-tech enterprises in 2020. Limited by the number of samples, DEA analysis failed to select more input and output indicators. In the future, with the accumulation of statistical data, the existing efficiency analysis will be further optimized.

Aiming at the misunderstanding of emphasizing quantity and neglecting quality in the cultivation of high-tech enterprises, this paper comprehensively uses DEA-BCC model and DEA Malmquist index decomposition method to make a comprehensive comparative study on the development of high-tech enterprises in ten representative provinces (cities) from two aspects of static efficiency evaluation and dynamic efficiency evaluation.

This study aims to assess the efficiency of Brazil, Russia, India, China, South Africa (BRICS) countries in achieving sustainable development by analyzing their ability to convert resources and technological innovations into sustainable outcomes.

Using data envelopment analysis (DEA), the study evaluates the economic, environmental and social efficiency of BRICS countries over the period 2010–2018. It ranks these countries based on their sustainable development performance and compares them to the period 2000–2007.

The study reveals varied efficiency levels among BRICS countries. Russia and South Africa lead in certain sustainable development aspects. South Africa excels in environmental sustainability, whereas Brazil is efficient in resource utilization for sustainable growth. China and India, despite economic growth, face challenges such as pollution and lower quality of life.

The study’s findings are constrained by the DEA methodology and the selection of variables. It highlights the need for more nuanced research incorporating recent global events such as the COVID-19 pandemic and geopolitical shifts.

Insights from this study can inform targeted and effective sustainability strategies in BRICS nations, focusing on areas such as industrial quality improvement, employment conditions and environmental policies.

The study underscores the importance of balancing economic growth with social and environmental considerations, highlighting the need for policies addressing inequality, poverty and environmental degradation.

This research provides a unique comparative analysis of BRICS countries’ sustainable development efficiency, challenging conventional perceptions and offering a new perspective on their progress.

The development of green manufacturing has become essential to achieve sustainable development and modernize the nation’s manufacturing and production capacity without increasing nonrenewable resource consumption and pollution. This study investigates the effect of green industrial practices on technical efficiency for Thai manufacturers.

The study uses stochastic frontier analysis (SFA) to estimate the stochastic frontier production function (SFPF) and inefficiency effects model, as pioneered by Battese and Coelli (1995).

This study shows that, on average, Thai manufacturing firms have experienced declining returns-to-scale production and relatively low technical efficiency. However, it is estimated that Thai manufacturing firms with a green commitment obtained the highest technical efficiency, followed by those with green activity, green systems and green culture levels, compared to those without any commitment to green manufacturing practices. Finally, internationalization and skill development can significantly improve technical efficiency.

Green industry policy mixes will be vital for driving structural reforms toward a more environmentally friendly and sustainable economic system. Furthermore, circular economy processes can promote firms' production efficiency and resource use.

To the best of the authors' knowledge, this study is the first to investigate the effect of green industry practices on the technical efficiency of Thai manufacturing enterprises. This study also encompasses analyses of the roles of internationalization, innovation and skill development.

The purpose of this study is to explore the causal relationship between smart transportation technology innovation and green transportation efficiency.

A comprehensive framework is used in this paper to assess the level of green transportation efficiency in China based on the instrumental variable – generalized method of moments model, followed by an examination of the impact of innovation in smart transportation technology on green transportation efficiency. Additionally, their non-linear relationship is explored, as are their important moderating and mediating effects.

The findings indicate that, first, the efficiency of green transportation is significantly enhanced by innovation in smart transportation technology, which means that investing in such technologies contributes to improving green transportation efficiency. Second, in areas where green transportation efficiency is initially low, smart transportation technology innovation exerts a particularly potent influence in driving green transportation efficiency, which underscores the pivotal role of such innovation in bolstering efficiency when it is lacking. Third, the relationship between smart transportation technology innovation and green transportation efficiency is moderated by information and communication technology, and the influence of smart transportation technology innovation on green transportation efficiency is realized through an increase in energy efficiency and carbon emissions efficiency.

Advancing green transportation is essential in establishing a low-carbon trajectory within the transportation sector.

The purpose of this study is to analyze the environmental efficiency level and trend of the transportation sector in the upper–mid–downstream of the Yangtze River Economic Belt and the JingJinJi region in China and assess the effectiveness of policies for protecting the low-carbon environment.

This study uses the meta-frontier slack-based measure (SBM) approach to evaluate environmental efficiency, which targets and classifies specific regions into regional groups. First, this study employs the SBM with the undesirable outputs to construct the environmental efficiency measurement models of the four regions under the meta-frontier and group frontiers, respectively. Then, this study uses the technology gap ratio to evaluate the gap between the group frontier and the meta-frontier.

The analysis reveals several key findings: (1) the JingJinJi region and the downstream of the YEB had achieved the overall optimal production technology in transportation than the other two regions; (2) significant technology gaps in environmental efficiency were observed among these four regions in China; and (3) the downstream region of the YEB exhibited the lowest levels of energy consumption and excessive CO₂ emissions.

To evaluate the differences in environmental efficiency resulting from regions and technological gaps in transportation, this study employs the meta-frontier model, which overcomes the limitation of traditional environmental efficiency methods. Furthermore, in the practical, the study provides the advantage of observing the disparities in transportation efficiency performed by the Yangtze River Economic Belt and the Beijing–Tianjin–Hebei regions.

Super-tall towers have surfaced as a pragmatic remedy to meet the escalating requisites for both residential and commercial areas and to stimulate economic growth in the Middle East. In this unique regional context, optimizing spatial usage stands as a paramount consideration in the architectural design of skyscrapers. Despite the proliferation of super-tall towers, there exists a conspicuous dearth of comprehensive research pertaining to space efficiency in Middle Eastern skyscrapers. This study endeavors to bridge this substantial gap in the literature.

The research methodology utilized in this paper adopts a case study approach to accumulate data regarding super-tall towers in the Middle East, with a specific focus on investigating space efficiency. A total of 27 super-tall tower cases from the Middle East were encompassed within the analytical framework.

Key findings can be succinctly summarized as follows: (1) average space efficiency was 75.5%, with values fluctuating between a minimum of 63% and a maximum of 84%; (2) average ratio of the core area to the gross floor area (GFA) registered 21.3%, encompassing a spectrum ranging from 11% to 36%; (3) predominantly, Middle Eastern skyscrapers exhibited a prismatic architectural form coupled with a central core typology. This architectural configuration mostly catered to residential and mixed-use functions; (4) the combination of concrete and outrigger frame systems was the most frequently utilized; (5) as the height of the tower increased, space efficiency tended to experience a gradual decline and (6) no significant discernible disparities were detected in the impact of diverse load-bearing systems and architectural forms on space efficiency.

Despite the proliferation of super-tall towers, there exists a conspicuous dearth of comprehensive research pertaining to space efficiency in Middle Eastern skyscrapers. This study endeavors to bridge this substantial gap in the literature.

This paper aims to define the efficiency achieved by urban transport companies in Spain concerning the resources they use, considering the type of management used for implementation, public-private, and size.

This study consisted of an analysis of the efficiency of 229 public-private urban transport operators during the period 2012–2021 using Data Envelopment Analysis, the Malmquist Index and inference estimators to determine productivity, efficiency change into Pure Technical Efficiency Change (PTECH), and scale efficiency change.

Based on the efficiency analysis, the authors concluded that of the 229 companies studied, more than 35 were inefficient in all analysed periods. Considering the sample used, direct management is considered significantly more efficient. It cannot be concluded that the size of these companies influences their efficiency, as the data show unequal development behaviours in the studied years.

This study provides arguments on whether there is a significant difference between the two types of management in the urban transport sector. It also includes firm size as a study variable, which has not been previously considered in other studies related to urban transport efficiency. Efficiency should be a crucial factor in determining funding allocation in this sector, as it encourages operators to optimize and improve their services.

The aim of this paper is to show current position of domestic airports and provide an improvement scheme through the comparative analysis of efficiency and social efficiency. We used SBM (Slack Based Measure) for efficiency and undesirable output model that is extended from SBM for social efficiency. In addition, window analysis is used for analyzing the trend of the values. For the scope of this study, we analyzed fourteen airports in Korea from 2004 to 2009. In the models, we considered the length of runway, the number of employees and terminal area as input factors, and the number of passengers, the amount of cargo and the number of flights as desirable outputs and directly controllable CO2 emissions from airports as undesirable output. The results show that all of the efficiencies are higher than the social efficiencies and both of them are decreasing by years. To improve social efficiency in 2009, the average amounts of reduced CO2 emissions which account for 48.3% of the total emissions are required.

Purpose – The purpose of the research is to analyze the efficiency of Islamic banks in Indonesia. The data used in this research are panel data observed from 2012 until 2016. The sampling of this research is conducted on five Sharia banks in Indonesia, that is, Bank Muamalat, Bank SyariahMandiri, BukopinSyariah, BRI Syariah, and Bank Mega Syariah.

Design/Methodology/Approach – The study uses a quantitative method to analyze the efficiency of Sharia banking with formulation of comparison of operating expenses to operating revenues (BOPO).

Finding – The result of this research concludes that Sharia banking in Indonesia has not been efficient during the last five years, that is, 2012–2016. This can be seen from the range of banking efficiency ratio. The average level of Islamic banking efficiency ranges between 89.73% and 94.16%. Bank Muamalat whose range is 94.16% shows the highest average efficiency ratio compared to other Sharia banks. Meanwhile, Bank Mega Syariah maintains the lowest average efficiency ratio that is 89.37%. The five Sharia banks have a high efficiency ratio of over 80%. This shows that Sharia banking in Indonesia is inefficient

Originality/Value – The bank should be able to balance between cost (cost) and revenue. Sharia banks must also be able to create good product innovation in order to increase the collection of funds from the community, such as for competitive outcomes, prizes, or other programs that raise public interest to use the services of Sharia banking.

Research Limitations/Implications – This inefficiency is due to the high bank operating costs compared to the bank’s operating income.

The purpose of this study is to quantify port efficiency assessment indicators to analyze the impact of COVID-19 on Chinese One Belt One Road (OBOR) ports.

This study utilized a grey prediction model GM(1,1) to forecast five relevant indicators for each of the 17 OBOR ports both with and without COVID-19 background conditions. Additionally, the data envelopment analysis (DEA) efficiency assessment approach was used to analyze the impact of COVID-19 on port efficiency.

The results indicate that cargo and container throughput growth rates during the COVID-19 pandemic are reduced by 1.7 and 2.1%, respectively. There was also a noticeable reduction in technological efficiency (TE) as well as pure technological efficiency (PTE), while scale efficiency (SE) remained largely unaffected. Furthermore, the dynamic efficiency MI was mainly negatively impacted by changes in overall efficiency change (EFFCH), where pure efficiency change (PECH) less than one contributed significantly towards overall regression of port efficiencies during this period.

This paper is unique in its use of a combination of the grey prediction model and DEA efficiency assessment to quantify changes in important indicators during pandemic periods. This approach not only provides a quantitative understanding of the impact on port-level efficiency through numerical quantification but also offers readers an intuitive understanding.