To read this content please select one of the options below:

Reconfigurable dual element dual band MIMO antenna for 5G (Sub-6 GHz) and WLAN applications

Ajit Kumar Singh (Department of Electronics and Communication Engineering, Indian Institute of Information Technology Ranchi, Ranchi, India)
Santosh Kumar Mahto (Department of Electronics and Communication Engineering, Indian Institute of Information Technology Ranchi, Ranchi, India)
Rashmi Sinha (Department of Electronics and Communication Engineering, National Institute of Technology Jamshedpur, Jamshedpur, India)

COMPEL - The international journal for computation and mathematics in electrical and electronic engineering

ISSN: 0332-1649

Article publication date: 9 May 2022

Issue publication date: 26 August 2022

121

Abstract

Purpose

This study aims to present dual band reconfigurable MIMO antenna for 5G (sub-6 GHz) and WLAN applications.

Design/methodology/approach

To achieve optimum bandwidth, radiation pattern and radiation efficiency, the defected ground structure (DGS) and a rectangular stub connected with the DGS are used. To further cover the sub-6 GHz spectrum (3.4–3.6 GHz) for future 5G communications, a two-element multi-input multi-output (MIMO) antenna configuration is designed by using the single element antenna. The proposed reconfigurable MIMO antenna using a PIN diode is designed on an FR4 substrate with a dielectric constant of 4.4 and a loss tangent of 0.02 and a 35 × 20 × 1.6 mm3 dimension.

Findings

The proposed antenna achieved dual operating bands of 3.4–4.1 GHz (5 G sub-6GHz applications) and 4.99–5.16 GHz (WLAN application) in the D = ON state. For D = OFF state, the proposed antenna achieved 3.55–3.65 GHz and 3.66–4.05 GHz frequency bands for 5G (sub-6GHz) applications. In terms of the envelop correlation coefficient, diversity gain, mean effective gain, total active reflection coefficient and isolation between the ports, the proposed antenna’s diversity performance characteristics are investigated and the obtained values are 0.05, 9.9 dB, ±3dB, −4dB, −15dB, respectively.

Research limitations/implications

The fabricated prototype antenna on FR4 substrate has measurable parameters that are in good agreement with the simulated findings. Due to hardware design limitations, there is a minor difference between software and hardware results.

Originality/value

The proposed MIMO antenna is compact and reconfigurable for 5G (sub-6GHz) and WLAN applications, and from the graph, the measurements and simulations have been found to be in close agreement.

Keywords

Acknowledgements

Disclosure statement: All authors certify that they have no affiliations with or involvement in any organization or entity with any financial interest or non-financial interest in the subject matter or materials discussed in this manuscript.

Citation

Singh, A.K., Mahto, S.K. and Sinha, R. (2022), "Reconfigurable dual element dual band MIMO antenna for 5G (Sub-6 GHz) and WLAN applications", COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol. 41 No. 5, pp. 1940-1955. https://doi.org/10.1108/COMPEL-02-2022-0091

Publisher

:

Emerald Publishing Limited

Copyright © 2022, Emerald Publishing Limited

Related articles