Search results

1 – 10 of 231
Article
Publication date: 18 March 2024

Prosun Mandal, Srinjoy Chatterjee and Shankar Chakraborty

In many of today’s manufacturing industries, such as automobile, aerospace, defence, die and mould making, medical and electrical discharge machining (EDM) has emerged as an…

Abstract

Purpose

In many of today’s manufacturing industries, such as automobile, aerospace, defence, die and mould making, medical and electrical discharge machining (EDM) has emerged as an effective material removal process. In this process, a series of discontinuous electric discharges is used for removing material from the workpiece in the form of craters generating a replica of the tool into the workpiece in a dielectric environment. Appropriate selection of the tool electrode material and combination of input parameters is an important requirement for performance enhancement of an EDM process. This paper aims to optimize an EDM process using single-valued neutrosophic grey relational analysis using Cu-multi-walled carbon nanotube (Cu-MWCNT) composite tool electrode.

Design/methodology/approach

This paper proposes the application of grey relational analysis (GRA) in a single-valued neutrosophic fuzzy environment to identify the optimal parametric intermix of an EDM process while considering Cu-MWCNT composite as the tool electrode material. Based on Taguchi’s L9 orthogonal array, nine experiments are conducted at varying combinations of four EDM parameters, i.e. pulse-on time, duty factor, discharge current and gap voltage, with subsequent measurement of two responses, i.e. material removal rate (MRR) and tool wear rate (TWR). The electrodeposition process is used to fabricate the Cu-MWCNT composite tool.

Findings

It is noticed that both the responses would be simultaneously optimized at higher levels of pulse-on time (38 µs) and duty factor (8), moderate level of discharge current (5 A) and lower level of gap voltage (30 V). During bi-objective optimization (maximization of MRR and minimization of TWR) of the said EDM process, the achieved values of MRR and TWR are 243.74 mm3/min and 0.001034 g/min, respectively.

Originality/value

Keeping in mind the type of response under consideration, their measured values for each of the EDM experiments are expressed in terms of linguistic variables which are subsequently converted into single-valued neutrosophic numbers. Integration of GRA with single-valued neutrosophic sets would help in optimizing the said EDM process with the Cu-MWCNT composite tool while simultaneously considering truth-membership, indeterminacy membership and falsity-membership degrees in a human-centric uncertain decision-making environment.

Details

World Journal of Engineering, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1708-5284

Keywords

Article
Publication date: 25 May 2023

Md Noor Uddin Milon and Habib Zafarullah

Money laundering (ML) is a major criminal offence stemming from unethical practices by personnel on the ground at Chattogram Port, an important import and export facility in…

Abstract

Purpose

Money laundering (ML) is a major criminal offence stemming from unethical practices by personnel on the ground at Chattogram Port, an important import and export facility in Bangladesh. Because money can be more easily laundered through imports, it is necessary to investigate the dubious process in this sector. This study aims to identify the items most regularly used for easy ML and the factors contributing to their vulnerability.

Design/methodology/approach

This research uses a qualitative approach and analyses information from primary sources. Data is obtained from customs officials, port authority personnel, importers and customs brokers through semi-structured questionnaires. Although there are many techniques for ML, this study only found three most overwhelming: under-invoicing, over-invoicing and misdeclaration. A few case studies have been used based on newspaper reports and the internet to triangulate the qualitative data.

Findings

Four import items – food products, garments, capital machinery and chemicals – have a higher risk of ML. This study also revealed that money launderers prefer under-invoicing food and garment items. Misdeclaration is more commonly associated with capital machinery and chemical items. Over-invoicing, on the other hand, is only prevalent in government purchases. The port authorities need to pay particular attention to these issues.

Research limitations/implications

As ML is an ongoing activity that changes over time, the findings of this research are circumscribed by the data collected at a single point in time. Additionally, this research did not consider alternative laundering methods.

Practical implications

The research results can provide a basis for creating effective anti-money laundering (AML) strategies to assist with sustainable economic growth.

Social implications

Developing effective AML measures can help combat corruption and establish good governance in the country and support human well-being.

Originality/value

This paper presents original research findings based on technical analysis. The Chattogram Port Authority and the National Board of Revenue have accepted and used the main findings in a collaborative action plan to tackle ML. The Bangladesh Bank, the country’s central bank, has also incorporated the necessary guidelines and regulations into the Money Laundering Prevention Act, 2012.

Details

Journal of Money Laundering Control, vol. 27 no. 3
Type: Research Article
ISSN: 1368-5201

Keywords

Article
Publication date: 19 October 2023

Jaffar Yakkop Alkhayer and Chander Mohan Gupta

This paper aims to examine the options available to arbitrators when they suspect money laundering during arbitration proceedings, considering their compatibility with fundamental…

Abstract

Purpose

This paper aims to examine the options available to arbitrators when they suspect money laundering during arbitration proceedings, considering their compatibility with fundamental principles and concepts of arbitration.

Design/methodology/approach

Using a doctrinal analysis approach, the paper draws on legal principles, antimoney laundering regulations and relevant literature to explore the topic. It considers relevant international treaties, standards set by the financial action task force on money laundering, cases and arguments from legal analysts and experts.

Findings

The paper identifies three options for arbitrators: disregarding suspicions, initiating an investigation or terminating the proceedings. Disregarding suspicions is deemed inappropriate, as it may facilitate the concealment of financial crimes. Initiating an investigation is seen as a preferable option, aligning with the arbitrator’s role and the public interest in nullifying contracts linked to criminal conduct. Terminating the proceedings is not recommended, as it contradicts the principle of natural justice. The paper emphasizes the importance of reasonable grounds for suspicions, notifying the parties, and allowing them to address the concerns.

Originality/value

This paper contributes to the existing literature by comprehensively analyzing the compatibility of these options with arbitration principles and concepts. It underscores the need for clear laws and directives to guide arbitrators in addressing financial crimes within the arbitration process, maintaining a balance between party autonomy and preventing the misuse of arbitration for illicit activities.

Details

Journal of Money Laundering Control, vol. 27 no. 3
Type: Research Article
ISSN: 1368-5201

Keywords

Article
Publication date: 19 March 2024

Kristy Padron and Sarah M. Paige

Many librarians are asked questions about copyright and intellectual property. They may be expected to advise on copyright or provide copyright education as part of their duties…

Abstract

Purpose

Many librarians are asked questions about copyright and intellectual property. They may be expected to advise on copyright or provide copyright education as part of their duties. Others may be “voluntold” to take on copyright, which may come as an unexpected addition to their workload. This case study provides suggestions for librarians to increase their copyright knowledge and create copyright education programs.

Design/methodology/approach

This case study showcases two copyright education programs created by a librarian in a college and another in a university. The librarians collaborated to learn more about the state of copyright education within academic libraries and explore their commonalities and differences. This case study introduces two copyright education programs and summarizes the state of copyright education within library and information science (LIS) and academic libraries.

Findings

The following themes within the two copyright education programs were identified through a case study: the complexity of copyright, the engagement (or lack thereof) across a college or university, the necessity of including copyright in information literacy instruction and the calls for professional development with copyright.

Research limitations/implications

This case study covers two differing institutions so its conclusions may not be applicable to all libraries or educational settings.

Practical implications

Many individuals who are in disciplines or occupations that regularly work with copyright may generate ideas for creating and providing continuing education within their organizations.

Originality/value

Library or education professionals can use the case study’s conclusions to inform and support their ongoing work with teaching and learning about copyright and intellectual property. By doing so, they can better support their students, faculty and institutions.

Details

Reference Services Review, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0090-7324

Keywords

Article
Publication date: 19 December 2022

Mohammad Fathi, Roya Amjadifard, Farshad Eshghi and Manoochehr Kelarestaghi

Photovoltaic (PV) systems are experiencing exponential growth due to environmental concerns, unlimited and ubiquitous solar energy, and starting-to-make-sense panel costs…

Abstract

Purpose

Photovoltaic (PV) systems are experiencing exponential growth due to environmental concerns, unlimited and ubiquitous solar energy, and starting-to-make-sense panel costs. Alongside designing more efficient solar panels, installing solar trackers and special circuitry for optimizing power delivery to the load according to a maximum power point tracking (MPPT) algorithm are other ways of increasing efficiency. However, it is critical for any efficiency increase to account for the power consumption of any amendments. Therefore, this paper aims to propose a novel tracker while using MPPT to boost the PV system's actual efficiency accounting for the involved costs.

Design/methodology/approach

The proposition is an experimental pneumatic dual-axis solar tracker using light-dependent resistor (LDR) sensors. Due to its embedded energy storage, the pneumatic tracker offers a low duty-cycle operation leading to tracking energy conservation, fewer maintenance needs and scalability potential. While MPPT assures maximum load power delivery, the solar PV's actual delivered power is calculated for the first time, accounting for the solar tracking and MPPT power costs.

Findings

The experiments' results show an increase of 37.6% in total and 35.3% in actual power production for the proposed solar tracking system compared to the fixed panel system, with an MPPT efficiency of 90%. Thus, the pneumatic tracking system offers low tracking-energy consumption and good actual power efficiency. Also, the newly proposed pneumatic stimulant can significantly simplify the tracking mechanism and benefit from several advantages that come along with it.

Originality/value

To the best of the authors’ knowledge, this work proposes, for the first time, a single-motor pneumatic dual-axis tracker with less implementation cost, less frequent operation switching and scalability potential, to be developed in future works. Also, the pneumatic proposal delivers high actual power efficiency for the first time to be addressed.

Details

World Journal of Engineering, vol. 21 no. 2
Type: Research Article
ISSN: 1708-5284

Keywords

Book part
Publication date: 25 March 2024

Begüm Ekmekçigil and Olesia Gorbunova Öner

The practice of public relations (PR) is shaped by the ‘life world’ of the professionals; moreover, both the experiences of the professionals and societal changes shape the…

Abstract

The practice of public relations (PR) is shaped by the ‘life world’ of the professionals; moreover, both the experiences of the professionals and societal changes shape the profession in a particular area (Hodges, 2006). Women have always played an important part in the development of PR as a profession and academic field in Turkey. Since PR Association of Turkey was established in 1972, five out of eight presidents have been women, and most of the members are also female. Female PR practitioners represent 70% of the total workforce of PR sector in Turkey, and most of the communication agencies are led by female entrepreneurs.

However, research on women' positions and their multiple roles in PR in Turkey are limited.

This chapter uses a qualitative study with 27 in-depth one-on-one interviews conducted in order to analyse female PR practitioners' experiences related to (1) the start of their careers, (2) their career experiences, (3) their evaluation of the profession, and lastly (4) their career goals. The interviewees included agency owners, managers, deputy general managers and group directors.

The research aimed to discover the female PR professional experience in respect of the difficulties they face in their practice and everyday life, advantages and/or disadvantages of being a female PR professional in Turkey and the ways women balanced their career and family duties.

Details

Women’s Work in Public Relations
Type: Book
ISBN: 978-1-80455-539-2

Keywords

Abstract

Details

Urban Resilience: Lessons on Urban Environmental Planning from Turkey
Type: Book
ISBN: 978-1-83549-617-6

Article
Publication date: 18 March 2024

Taotao Jin, Xiuhui Cui, Chuanyue Qi and Xinyu Yang

This paper aims to develop a specific type of mobile nonrigid support friction stir welding (FSW) robot, which can adapt to aluminum alloy trucks for rapid online repair.

Abstract

Purpose

This paper aims to develop a specific type of mobile nonrigid support friction stir welding (FSW) robot, which can adapt to aluminum alloy trucks for rapid online repair.

Design/methodology/approach

The friction stir welding robot is designed to complete online repair according to the surface damage of large aluminum alloy trucks. A rotatable telescopic arm unit and a structure for a cutting board in the shape of a petal that was optimized by finite element analysis are designed to give enough top forging force for welding to address the issues of inadequate support and significant deformation in the repair process.

Findings

The experimental results indicate that the welding robot is capable of performing online surface repairs for large aluminum alloy trucks without rigid support on the backside, and the welding joint exhibits satisfactory performance.

Practical implications

Compared with other heavy-duty robotic arms and gantry-type friction stir welding robots, this robot can achieve online welding without disassembling the vehicle body, and it requires less axial force. This lays the foundation for the future promotion of lightweight equipment.

Originality/value

The designed friction stir welding robot is capable of performing online repairs without dismantling the aluminum alloy truck body, even in situations where sufficient upset force is unavailable. It ensures welding quality and exhibits high efficiency. This approach is considered novel in the field of lightweight online welding repairs, both domestically and internationally.

Details

Industrial Robot: the international journal of robotics research and application, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0143-991X

Keywords

Article
Publication date: 25 January 2024

Ayesha Akter Sumi, Saif Ahmed and Syed Shah Alam

This study aims to examine the impact of Islamic teachings on environmental corporate social responsibility (CSR) practices in Bangladesh, a country where Islamic principles are…

Abstract

Purpose

This study aims to examine the impact of Islamic teachings on environmental corporate social responsibility (CSR) practices in Bangladesh, a country where Islamic principles are profoundly influential.

Design/methodology/approach

Using a mixed-methods research approach (quantitative study with close-ended questionnaire and qualitative study with semistructure interview), this study aims to explore the role of individual characteristics and organizational contexts in environmental CSR practices. The study uses a robust analytical framework encompassing variance inflation factor, orthogonal loading, Cronbach’s alpha, composite reliability and average variance extracted to assess the reliability and validity of these metrics.

Findings

Thematic analysis reveals the motivations, attitudes and challenges experienced by organizational leaders in aligning Islamic ethics with environmental stewardship, whereas the quantitative results provide empirical support for the relationship between various organizational practices (denoted as M#1 to M#8) and environmental CSR.

Originality/value

The findings of this study illuminate the potential benefits of tailoring CSR policies to fit within specific religious and cultural frameworks, offering both theoretical contributions and practical insights.

Details

Journal of Islamic Marketing, vol. 15 no. 4
Type: Research Article
ISSN: 1759-0833

Keywords

Article
Publication date: 20 March 2024

Mohammad M. Taamneh, Manaf Al-Okaily, Jamal Daoud Abudoleh, Rokaya Albdareen and Abdallah M. Taamneh

The purpose of this study was to investigate the connection between green human resource management (GHRM) and corporate social responsibility (CSR). In addition, this study also…

Abstract

Purpose

The purpose of this study was to investigate the connection between green human resource management (GHRM) and corporate social responsibility (CSR). In addition, this study also investigates how the impact of GHRM varies depending on the extent of transformational leadership.

Design/methodology/approach

Adopting a quantitative approach, the sample consists of 376 employees who hold leadership positions in the academic body and those who work in human resources units at universities who won the Web Metric Award.

Findings

Results have shown that all GHRM practices were found to have a significant and positive effect on CSR. In addition, the findings revealed that transformational leadership positively moderates the relationship between GHRM and CSR.

Originality/value

The findings of this study contribute to the existing body of knowledge by providing empirical evidence of the positive relationship between GHRM practices, transformational leadership and CSR performance. In addition, the study highlights the moderating influence of transformational leadership on the relationship between GHRM and CSR, suggesting that transformational leadership can increase the efficacy of GHRM practices in promoting CSR outcomes.

Details

International Journal of Organizational Analysis, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1934-8835

Keywords

1 – 10 of 231