Search results

To contribute to the identification of the parameters influencing the behavior of textile-reinforced concrete (TRC), the purpose of this paper is to investigate the flexural behavior of TRC-based plates under four-point bending notably designed in the context of sustainable development and the substitution of mortar components with natural and abundant materials.

An extensive experimental campaign was focused about two main parameters. The first one emphases the textile reinforcements, such as the number of layers, the nature and the textile mesh size. In the second step, the composition of the mortar matrix was explored through the use of dune sand as a substitute of the river one.

Test results in terms of load-displacement response and failure patterns were highlighted, discussed and confronted to literature ones. As key findings, an increase of the load-bearing capacity and ductility, comparable to the use of an industrially produced second textile layer was recorded with the use of dune sand in the mortar mix design. The designed ecofriendly samples with economic concerns denote the significance of obtained outcomes in this research study.

The novelty of the present work was to valorize the use of natural dune sand to design new TRC samples to respond to the environmental and economical requirements. The obtained values provide an improved textiles–matrix interface performance compared to classical TRC samples issued from the literature.

The objective of this research is to evaluate the influence of mineral additions on the mechanical performances of polymer concrete. This study aims to propose a novel approach formulation of polymer concrete based on reduction in the quantity of the binder and disposal of large quantities of industrial by-products and household waste such as the marble, the brick and silica fume whose valuation in polymer concrete could be an interesting ecological and economical alternative. The incorporation of a rate of 10% brick powder affects the distribution of pores inside polymer concrete, that is, the pore diameters become thinner and decrease and the porosity becomes evenly distributed. The recycled mineral brick powder addition in polymer concrete mix improved the mechanical properties.

This polymer concrete was prepared by using polyester resin and two different types of sand, following a new formulation based on an empirical method. Furthermore, the optimal binder percentage was of 20% resin and a mixture of 52% dune sand and 48% quarry sand according to the Abrams method. To achieve our objective, five rates (from 2% to 10%) of brick powder, marble powder and silica fume were examined. Afterwards, its mechanical characteristics were evaluated via a three-point flexural with compressive resistance. The findings indicated that the addition of brick, marble and silica fume to polymer concrete increases the flexural strength with 21.84%, 12.76% and 9.07%, respectively.

Concerning the compressive strength, the best resistance is that of polymer concretes based on brick powder, and this economic formulation of polymer concrete serves the optimal cost/resistance ratio criteria. It allows an improvement in the mechanical resistance of concrete are obtained by adding brick powder that exceed that of the reference concrete.

In the past few decades, there has been several contribution concerning the subject of the reduction of the binder quantity in polymer concretes and adding the industrial and household wastes. However, previous studies revolving around the same area disregarded the effect of the brick powder, which appears scientifically of great importance for enriching the literature.

In many societies, environmental problems have had some negative impacts on both social and economic features with issues like capital structure seriously affected. In this write-up, an attempt has been made to pinpoint the influence of the combined effects of integrated reporting and financial leverage on the value of a firm. In most emerging markets, investment is heavily dependent on foreign capital inflow which is mainly in the form of financial leverage. It is, therefore, necessary to know how this shapes the net worth of firms in which they are invested. Shareholders' fund is a major factor in determining the level of investment and economic stability of a nation and consequently improvements in sustainable development. Hence, the moderating role of financial leverage in the integrated reporting-shareholders’ funds relationship aims to warrant this research.

All listed firms on the Nigerian Stock Exchange (NSE) as of 31st December 2021 were affected by this research. Filtering resulted in the use of 77 companies as a sample for the study covering a period of 12 years (2010–2021) with a total of 788 observations. Analyses of data were done through line graphs to show the trend and flow of disclosures between 2010 and 2021. Furthermore, linear regression was also applied to help determine the multiple effects of financial leverage and integrated reporting on shareholders' funds.

The outcomes showed that economic disclosure was 100% throughout the period of observation as opposed to environmental and social disclosures which, fluctuate throughout the period with an average of slightly over 55%. It was also discovered that a low but significant financial leverage moderated the interaction of integrated reporting on shareholders' funds.

Stakeholders and policymakers should, therefore, put in place rules, regulations, standards, structures and administrative networks to enable firms to comply with local rules, guidelines and upgraded standards of international worth on sustainability issues.

This research explores the problem of the effects of integrated reporting on investment capital as it affects developing economies. Results from this study could go a long way in narrowing the lack of interest in sustainability issues by prospective investors coupled with the low level of environmental and social reporting by firms in African economies that are mostly underdeveloped.

This research aims to propose a model for the complex decision-making involved in the ecological restoration of mega-infrastructure (e.g. railway engineering). This model is based on multi-source heterogeneous data and will enable stakeholders to solve practical problems in decision-making processes and prevent delayed responses to the demand for ecological restoration.

Based on the principle of complexity degradation, this research collects and brings together multi-source heterogeneous data, including meteorological station data, remote sensing image data, railway engineering ecological risk text data and ecological restoration text data. Further, this research establishes an ecological restoration plan library to form input feature vectors. Random forest is used for classification decisions. The ecological restoration technologies and restoration plant species suitable for different regions are generated.

This research can effectively assist managers of mega-infrastructure projects in making ecological restoration decisions. The accuracy of the model reaches 0.83. Based on the natural environment and construction disturbances in different regions, this model can determine suitable types of trees, shrubs and herbs for planting, as well as the corresponding ecological restoration technologies needed.

Managers should pay attention to the multiple types of data generated in different stages of megaproject and identify the internal relationships between these multi-source heterogeneous data, which provides a decision-making basis for complex management decisions. The coupling between ecological restoration technologies and restoration plant species is also an important factor in improving the efficiency of ecological compensation.

Unlike previous studies, which have selected a typical section of a railway for specialized analysis, the complex decision-making model for ecological restoration proposed in this research has wider geographical applicability and can better meet the diverse ecological restoration needs of railway projects that span large regions.

This paper provides practical advice for archaeologists and heritage specialists wishing to use ML approaches to identify archaeological features in high-resolution satellite imagery (or other remotely sensed data sources). We seek to balance the disproportionately optimistic literature related to the application of ML to archaeological prospection through a discussion of limitations, challenges and other difficulties. We further seek to raise awareness among researchers of the time, effort, expertise and resources necessary to implement ML successfully, so that they can make an informed choice between ML and manual inspection approaches.

Automated object detection has been the holy grail of archaeological remote sensing for the last two decades. Machine learning (ML) models have proven able to detect uniform features across a consistent background, but more variegated imagery remains a challenge. We set out to detect burial mounds in satellite imagery from a diverse landscape in Central Bulgaria using a pre-trained Convolutional Neural Network (CNN) plus additional but low-touch training to improve performance. Training was accomplished using MOUND/NOT MOUND cutouts, and the model assessed arbitrary tiles of the same size from the image. Results were assessed using field data.

Validation of results against field data showed that self-reported success rates were misleadingly high, and that the model was misidentifying most features. Setting an identification threshold at 60% probability, and noting that we used an approach where the CNN assessed tiles of a fixed size, tile-based false negative rates were 95–96%, false positive rates were 87–95% of tagged tiles, while true positives were only 5–13%. Counterintuitively, the model provided with training data selected for highly visible mounds (rather than all mounds) performed worse. Development of the model, meanwhile, required approximately 135 person-hours of work.

Our attempt to deploy a pre-trained CNN demonstrates the limitations of this approach when it is used to detect varied features of different sizes within a heterogeneous landscape that contains confounding natural and modern features, such as roads, forests and field boundaries. The model has detected incidental features rather than the mounds themselves, making external validation with field data an essential part of CNN workflows. Correcting the model would require refining the training data as well as adopting different approaches to model choice and execution, raising the computational requirements beyond the level of most cultural heritage practitioners.

Improving the pre-trained model’s performance would require considerable time and resources, on top of the time already invested. The degree of manual intervention required – particularly around the subsetting and annotation of training data – is so significant that it raises the question of whether it would be more efficient to identify all of the mounds manually, either through brute-force inspection by experts or by crowdsourcing the analysis to trained – or even untrained – volunteers. Researchers and heritage specialists seeking efficient methods for extracting features from remotely sensed data should weigh the costs and benefits of ML versus manual approaches carefully.

Our literature review indicates that use of artificial intelligence (AI) and ML approaches to archaeological prospection have grown exponentially in the past decade, approaching adoption levels associated with “crossing the chasm” from innovators and early adopters to the majority of researchers. The literature itself, however, is overwhelmingly positive, reflecting some combination of publication bias and a rhetoric of unconditional success. This paper presents the failure of a good-faith attempt to utilise these approaches as a counterbalance and cautionary tale to potential adopters of the technology. Early-majority adopters may find ML difficult to implement effectively in real-life scenarios.

Unlike many high-profile reports from well-funded projects, our paper represents a serious but modestly resourced attempt to apply an ML approach to archaeological remote sensing, using techniques like transfer learning that are promoted as solutions to time and cost problems associated with, e.g. annotating and manipulating training data. While the majority of articles uncritically promote ML, or only discuss how challenges were overcome, our paper investigates how – despite reasonable self-reported scores – the model failed to locate the target features when compared to field data. We also present time, expertise and resourcing requirements, a rarity in ML-for-archaeology publications.

A comprehensive understanding of the determining factors and implications of the frameworks for appreciating the relationships between climate risks and cultural heritage remains deficient. To address the gap, the review analysed literature on the management of climate risk in cultural heritage. The review examines the strengths and weaknesses of climate risk management (CRM) frameworks and attendant implications for the conservation of cultural heritage.

The study adopted a two-phased systematic review procedure. In the first phase, the authors reviewed related publications published between 2017 and 2021 in Scopus and Google Scholar. Key reports published by organisations such as the United Nations Educational, Scientific and Cultural Organisation (UNESCO) and International Council on Monuments and Sites (ICOMOS) were identified and included in Phase Two to further understand approaches to CRM in cultural heritage.

Results established the changes in trend and interactions between factors influencing the adoption of CRM frameworks, including methods and tools for CRM. There is also increasing interest in adopting quantitative and qualitative methods using highly technical equipment and software to assess climate risks to cultural heritage assets. However, climate risk information is largely collected at the national and regional levels rather than at the cultural heritage asset.

The review establishes increasing implementation of CRM frameworks across national boundaries at place level using high-level technical skills and knowledge, which are rare amongst local organisations and professionals involved in cultural heritage management.

The review established the need for multi-sectoral, bottom-up and place-based approaches to improve the identification of climate risks and decision-making processes for climate change adaptation.

This study aims to investigate the most effective approach for governments and enterprises to combat desertification by considering the governance cycle. The focus is on understanding how the government can incentivize enterprises to actively engage in desertification combat efforts.

Both the government and the enterprise are treated as rational entities, making strategic choices for joint participation in combating desertification. Recognizing the dynamic nature of the desertification combat area, differential game models are employed to identify the optimal mode for combating desertification.

The findings underscore the significant influence of the governance cycle duration on the selection of desertification combat modes for government and enterprise. A cooperative mode is best suited to a short governance cycle, while an ecological subsidy mode is optimal for a longer cycle. Enhancing governance technology and shortening the governance cycle are conducive to combating desertification. Reducing taxes alone may not be an effective control strategy; rather, the government can better motivate enterprises by adopting tax rate policies aligned with the chosen governance mode.

This research contributes by elucidating the impact mechanism of the government cycle’s length on the desertification combat process. The results may offer valuable insights for governments in formulating strategies to encourage corporate participation in combating desertification and provide theoretical support for selecting optimal desertification combat modes.

Coastal zone ecological restoration project is of great significance to alleviate marine ecological degradation. Evaluating the effect of coastal ecological restoration projects and identifying the obstacle factors affecting their restoration level can provide an empirical basis for future Marine ecological restoration projects.

However, due to the initial stage of coastal zone ecological restoration projects, the actual monitoring data of coastal zone ecological restoration is relatively lacking. Based on the CRITIC-TOPSIS (combination of CRITIC method and TOPSIS method) method, combined with the subjective perception of the public and the actual data of the restoration project, this paper proposes an evaluation method of the coastal zone ecological restoration effect to obtain the specific implementation effect of the coastal zone ecological restoration project. The main obstacle factors affecting the evaluation of coastal ecological restoration effect are identified by using the obstacle degree model.

This paper conducted an empirical study on the restoration of sandy shoreline and coastal wetland in Qinhuangdao city. Based on the data of restoration projects and the subjective perception of ecological restoration by the public in Qinhuangdao city, the research results showed that the coastal zone ecological restoration effect of Qinhuangdao city was general. The quality of the restoration project and the public perception have an important influence on the evaluation of the restoration effect. Improving the quality of the restoration project, strengthening the public's participation in ecological restoration and allowing the public to better participate in the ecological restoration of the coastal zone can improve the effect of ecological restoration of the coastal zone in an all-round way.

The research results of this paper have a guiding role in the ecological restoration of coastal cities in the future, and also have a demonstration and reference role for the assessment of the effect of ecological restoration of coastal zones.

Invented in late 1890s, asbestos cement sheeting rose to prominence during the post-Second World War period as a building material for low-cost housing by state housing commissions and low-income families (“fibro homes”). The adverse health effects of asbestos fibres in the building industry and home renovation activities are well documented. Fibro homes of the 1950s and 1960s are increasingly coming under the gaze of heritage studies, which brings to the fore the question of how to deal with the asbestos cement sheeting most are clad with.

This paper provides the first systematic review to assess the literature (126 papers were identified in Google Scholar and scanned for content) on the conservation management of asbestos cement sheeting in heritage properties.

Overall, engagement with the conservation management of asbestos cement sheeting in heritage properties was low, with only two sources dealing with asbestos cement sheeting in any level of detail. The studies note that if asbestos cement sheeting is in good condition, it should be left alone. Numerous conservation and repair options do exist, in particular the application of (coloured) sealants that extend the life of asbestos cement sheets and asbestos cement roofing.

This paper represents the first systematic review to assess conservation management options for asbestos cement sheeting in heritage properties.