Search results

The purpose of this article is to investigate the propagation characteristics (such as particle motion, attenuation and phase velocity) of a Rayleigh wave in a nonlocal generalized thermoelastic media.

The bulk waves are represented with Helmholtz potentials. The stress-free insulated and isothermal plane surfaces are taken into account. Rayleigh wave dispersion relation has been established and is found to be complex. Due to the presence of radicals, the dispersion equation is continuously computed as a complicated irrational expression. The dispersion equation is then converted into a polynomial equation that can be solved numerically for precise complex roots. The extra zeros in this polynomial equation are eliminated to yield the dispersion equation’s roots. These routes are then filtered for inhomogeneous wave propagation that decays with depth. To perform numerical computations, MATLAB software is used.

In this medium, only one mode of Rayleigh wave exists at both isothermal and insulated boundaries. The thermal factors of nonlocal generalized thermoelastic materials significantly influence the particle motion, attenuation and phase velocity of the Rayleigh wave.

Numerical examples are taken to examine how the thermal characteristics of materials affect the existing Rayleigh wave’s propagation characteristics. Graphical analysis is used to evaluate the behavior of particle motion (such as elliptical) both inside and at the isothermal (or insulated) flat surface of the medium under consideration.

The purpose of this paper is to investigate the existence of SH-waves in fiber-reinforced layer placed over a heterogeneous elastic half-space.

The heterogeneity of the elastic half-space is caused by the exponential variations of density and rigidity. As a special case when both the layers are homogeneous, the derived equation is in agreement with the general equation of Love wave.

Numerically, it is observed that the velocity of SH-waves decreases with the increase of heterogeneity and reinforced parameters. The dimensionless phase velocity of SH-waves increases with the decreases of dimensionless wave number and shown through figures.

In this work, SH-wave in a fiber-reinforced anisotropic medium overlying a heterogeneous gravitational half-space has been investigated analytically and numerically. The dispersion equation for the propagation of SH-waves has been observed in terms of Whittaker function and its derivative of second degree order. It has been observed that on the removal of heterogeneity of half-space, and reinforced parameters of the layer, the derived dispersion equation reduces to Love wave dispersion equation thereby validates the solution of the problem. The equation of propagation of Love wave in fiber-reinforced medium over a heterogeneous half-space given by relevant authors is also reduced from the obtained dispersion relation under the considered geometry.

The purpose of this paper is to investigate the mathematical model comprising a heterogeneous fluid-saturated fissured porous layer overlying a non-homogeneous anisotropic fluid-saturated porous half-space without fissures. The influence of point source on horizontally polarized shear-wave (SH-wave) propagation has been studied intensely.

Techniques of Green’s function and Fourier transform are applied to acquire displacement components, and with the help of boundary conditions, complex frequency equation has been constructed.

Complex frequency relation leads to two distinct equations featuring dispersion and attenuation properties of SH-wave in a heterogeneous fissured porous medium. Using MATHEMATICA software, dispersion and damping curves are sketched to disclose the effects of heterogeneity parameters associated with both media, parameters related to rigidity and density of single porous half-space, attenuation coefficient, wave velocity, total porosity, volume fraction of fissures and anisotropy. The fact of obtaining classical Love wave equation by introducing several particular conditions establishes the validation of the considered model.

To the best of the authors’ knowledge, effect of point source on SH-wave propagating in porous layer containing macro as well as micro porosity is not analysed so far, although theory of fissured poroelasticity itself has vast applications in real life and impact of point source not only enhances the importance of fissured porous materials but also opens a new area for future research.

This paper sets out to show the feasibility of the genetic algorithm inverse method for the determination of the parameters of crystallization kinetics laws in isothermal and non‐isothermal conditions, using multiple experiments.

The mathematical model for crystallization kinetics determination and the numerical methods of its resolution are introduced. Crystallization kinetic parameters determined by approximate physical analysis and the inverse genetic algorithm method are presented. Injection molding simulations taking into account crystallization are performed using the finite element method.

It is necessary to perform the optimization on two parameters, transformed volume fraction and number of spherulites to obtain correct results. It is possible to use results from different samples, in spite of the dispersion of some values.

Experimental data for isothermal and non‐isothermal conditions were used and obtained good results for the parameters of crystallization kinetics laws from which the evolutions of overall crystallization kinetics and crystalline microstructure were deduced. Nevertheless, the dispersion of the experimental data concerning the number of spherulites obtained with different samples is important. The evolution of the number of spherulites is required for the optimization to get correct results.

An important result of this work is that the genetic algorithm optimization can be applied to this problem where the experiments cannot be performed with a single sample and the experimental data for the number of spherulites have low precision. Even if only the crystallization kinetics was considered, the feasibility in molding simulation has been shown.

Simulation of crystallization in injection molding is very important for a later prediction of the end‐use properties.

The purpose of study to this article is to analyze the Rayleigh wave propagation in an isotropic dry sandy thermoelastic half-space. Various wave characteristics, i.e wave velocity, penetration depth and temperature have been derived and represented graphically. The generalized secular equation and classical dispersion equation of Rayleigh wave is obtained in a compact form.

The present article deals with the propagation of Rayleigh surface wave in a homogeneous, dry sandy thermoelastic half-space. The dispersion equation for the proposed model is derived in closed form and computed analytically. The velocity of Rayleigh surface wave is discussed through graphs. Phase velocity and penetration depth of generated quasi P, quasi SH wave, and thermal mode wave is computed mathematically and analyzed graphically. To illustrate the analytical developments, some particular cases are deliberated, which agrees with the classical equation of Rayleigh waves.

The dispersion equation of Rayleigh waves in the presence of thermal conductivity for a dry sandy thermoelastic medium has been derived. The dry sandiness parameter plays an effective role in thermoelastic media, especially with respect to the reference temperature for η = 0.6,0.8,1. The significant difference in η changes a lot in thermal parameters that are obvious from graphs. The penetration depth and phase velocity for generated quasi-wave is deduced due to the propagation of Rayleigh wave. The generalized secular equation and classical dispersion equation of Rayleigh wave is obtained in a compact form.

Rayleigh surface wave propagation in dry sandy thermoelastic medium has not been attempted so far. In the present investigation, the propagation of Rayleigh waves in dry sandy thermoelastic half-space has been considered. This study will find its applications in the design of surface acoustic wave devices, earthquake engineering structural mechanics and damages in the characterization of materials.

The objective of this study is to model the influence of free gas, in the form of size‐distributed fine bubbles, on sound attenuation and dispersion in a thin‐walled elastic cylindrical tube filled with viscoelastic polymeric liquid.

Sound wave propagation in the system is described within a three‐phase interaction scheme, based on a quasi‐homogeneous approach to liquid‐gas mixture dynamics in the wave. Coupled equations of tube wall deformations and viscoelastic liquid dynamics in the tube are solved using a long‐wave approximation. The dissipative losses, stemming from flow gradients in the wave, as well as from non‐equilibrium bubble‐liquid interaction, are accounted for. The dispersion equation for the waveguide is obtained and studied numerically.

The results of the study indicate that bubble‐size distribution in viscoelastic liquid has an essential impact on sound propagation in the tube at sufficiently high frequencies. The frequency range in which the mixture heterogeneity influences the acoustic properties of the system is sensitive to both the distribution parameters and the rheological properties of the liquid. As distinct to polydispersity features, the viscoelastic properties of liquid are also relevant in the low‐frequency range, where they lead to an increase of the wave speed and a decrease of its attenuation.

A model of sound wave propagation in a tube filled with a heterogeneous viscoelastic liquid‐bubble mixture is formulated. The study provides a basis for modeling transient processes in tubes filled with polymeric liquids containing free gas, and for acoustic control of certain processes in polymer technologies.

The classical advection-dispersion equation (ADE) model cannot accurately depict the gas transport process in natural geological formations. This paper aims to study the behavior of CO₂ transport in fractal porous media by using an effective Hausdorff fractal derivative advection-dispersion equation (HFDADE) model.

Anomalous dispersion behaviors of CO₂ transport are effectively characterized by the investigation of time and space Hausdorff derivatives on non-Euclidean fractal metrics. The numerical simulation has been performed with different Hausdorff fractal dimensions to reveal characteristics of the developed fractal ADE in fractal porous media. Numerical experiments focus on the influence of the time and space fractal dimensions on flow velocity and dispersion coefficient.

The physical mechanisms of parameters in the Hausdorff fractal derivative model are analyzed clearly. Numerical results demonstrate that the proposed model can well fit the history of gas production data and it can be a powerful technique for depicting the early arrival and long-tailed phenomenon by incorporating a fractal dimension.

To the best of the authors’ knowledge, first time these results are presented.

The purpose of this paper is to deal with the propagation of Love waves in inhomogeneous viscoelastic layer overlying a gravitational half-space. It has been observed velocity of Love waves depends on viscosity, gravity, inhomogeneity and initial stress of the layer.

The dispersion relation for the Love wave in closed form is obtained with Whitaker’s function.

The effect of various non-dimensional inhomogeneity factors, gravity factor and internal friction on the non-dimensional Love wave velocity has been shown graphically. The authors observed that the dispersion curve of Love wave increases as the inhomogeneity factor increases. It is seen that increment in gravity, inhomogeneity and internal friction decreases the damping phase velocity of Love waves but it is more prominent in case of internal friction.

Surface plot of Love wave reveals that the velocity ratio increases with the increase of non-dimensional phase velocity and non-dimensional wave number. The above results may attract seismologists and geologists.

The purpose of this paper is to introduce a method for evaluating the production tolerances influence on the practically realized optimal solution of electrotechnical devices. The influence is estimated by the optimal solution range defined with a given probability.

Because of the tolerances nature, the paper is in probabilistic categories. The accent is put on the cases when the mathematical description of the cost function is analytical, for example polynomial found on the basis of the design of experiments and response surface methodology. The optimal solution range is defined with a given probability. The governing equation is Chebychev's inequality. In some cases, Chebychev's inequality would be rather weak but the advantage is that it is valid for all kinds of probabilistic distributions.

A numerical example – an electrical machine – is considered with respect to variances in the magnetic characteristics of the stator and rotor core electrotechnical steel and tolerances in the geometrical dimensions of the machine. An analytical expression for the variance of the optimal solution is obtained in the case of a second order polynomial cost function. It is found that the energetic characteristic of the realized optimal design is expected to be negligibly different from its value in the proposed optimal project.

Although the example concerns the field of electrical machines, the methodology can be of interest for other domains and for different electrotechnical devices.

A computer model based on the fractional step method is presented for modelling density coupled mass transport in groundwater. Although several models utilising the fractional step method had been developed previously, all were based on the Eulerian solution approach. The model developed by the authors uses the Langrangian approach which has some inherent advantages and disadvantages. The problems associated with the implementation of the fractional step method and techniques by which they were overcome are discussed. The performance of the model is examined and results obtained for standard problems are compared with those from other computer packages.