Search results

The purpose of this paper is to study the thermal and mechanical disturbances in a piezo-electric microstretch thermoelastic medium due to the presence of ultra-short laser pulse as input heat source.

The medium is subjected to normal force, tangential force and thermal source. The solution of the problems is developed in terms of normal modes. Mathematical expressions have been obtained for normal stress, tangential stress, microstress, dielectric displacement vector and temperature change.

The numerically computed results are shown graphically. The effect of time and laser radius on temperature distribution is also shown graphically and comparison to theoretical results has been discussed. A mathematical model has been developed for the system of equations and various stress quantities have been analyzed. Some computer programs have also been written for this study. Two particular cases are also derived from the present investigation.

The effect of laser heat source is studied in piezo-electric microstretch thermoelastic medium. It is observed from the figures that the laser heat source has significant role on the values of coupled tangential stress.

The purpose of this paper is to evaluate hygro-thermo-mechanically induced normalized stress intensity factor (NSIF) of an edge crack symmetric angle-ply piezo laminated composite plate (PLCP) using displacement correlation method.

In the present work, the governing equations are solved through conventional finite element method combined with higher order shear deformation plate theory utilizing the micromechanical approach.

The effects of crack length, the thickness of the plate and piezoelectric layer, stacking sequences, fiber volume fraction, position of piezoelectric layer, change in moisture and temperature, and voltage on the NSIF are examined. The numerical results are presented in the form of a table for the better understanding and accuracy. The present outlined approach is validated with results available in the literature. These results can become a benchmark for future studies.

The mathematical models theoretically have been developed by considering different parameters. The results are generated using MATLAB 2015 software developed by the authors’ side.

The fracture analysis of a single edge crack PLCP with the effect of a piezoelectric layer at the different location of cracked structures, plate thickness, and actuator voltage and hygro-thermo loading is the novelty of research for health monitoring and high-performance analysis.

The application of the fast multipole method reduces the computational costs and the memory requirements of the boundary element method from O(N²) to approximately O(N). In this paper we present that the computational costs can be strongly shortened, when the multipole method is not only used for the solution of the system of linear equations but also for the field computation in arbitrary points.

This paper aims to give a brief overview of dielectric properties, relative complex permittivity and its dependence on frequency. The significance of different approaches to complex permittivity is also discussed.

The different mechanisms of polarization are then presented. Dielectric measurements are given, and an RC parallel-equivalent circuit is used to simulate a parallel plate capacitor, and the way in which the impedance of the circuits is affected by frequency is illustrated in their respective diagrams. The way in which dielectric properties change with time is also discussed.

The goal of this paper is to give an overview of the characteristics of the dielectrics and how frequency affects the relative complex permittivity and to present different approaches to and equations for the relative complex permittivity, such as that of Debye, Cole–Cole, Cole–Davidson and Havriliak–Negami. In addition, three mechanisms of polarization, namely, electronic, atomic and bipolar, are presented. The most common dielectric characterization device, a capacitor with parallel plates between which the dielectric material under study is located, is also discussed. Ohmic and dielectric losses of a non-ideal capacitor are accounted for. Furthermore, this paper studies the equivalent circuits of a non-ideal parallel plate capacitor, those being a resistor and an ideal capacitor connected either in series or in parallel.

Finally, dielectric responses to both time and to stepwise excitation are given.

This paper aims to focus on the evaluation of the electrical properties of bio-based polyurethane material derived from cashew nut husk tannin and also the effect of temperature and frequency on the dielectric values and alternate current (AC) conductivity.

Bio-based polyurethane is prepared from cashew nut husk tannin as polyol, their dielectric constant and dielectric loss factor are measured using an inductance capacitance resistance (LCR) metre, and the AC conductivity is determined using dielectric constant and loss values.

The dielectric constant values are high, and the values decrease with an increase in frequency but increase with an increase in temperature. The AC conductivity values are low; hence, the material can be categorized as insulators or semi-conductors. Because the polyurethanes have a good dielectric value and are cost-effective, as they are derived from renewable biomaterial waste, they have promising applications for the future.

The experiment is carried out up to the frequency of 200 KHz because of the limitation in the instrument. But for the institute of printed circuits (IPC) and other specifications, the values of dielectric loss and dielectric constant will be generally coated for 1 MHz.

The high dielectric constant and loss values show that the polyurethane can be opted for use as capacitors in electronic devices, and the values are comparable to the requirements of IPC4101A/24IPC; hence, they are suitable for the application as printed circuit board (PCB) laminate.

The use of biomaterial waste in the production of polyurethane will bring down the dependence of polyurethane industry on fossil fuel reserve, reduce carbon dioxide foot print and reduce the cost of production.

The motivation of the work was its ecological aspect and also aims on the use of an alternative bio-based material in the PCB industry.

This paper deals with the coupled mechanical‐electrostatic analysis of a shunt capacitive MEMS switch. The mechanical and electrostatic parts of the problem are modelled by the FE and BE methods, respectively. The fast multipole method is applied to reduce the storage requirements and the computational cost of the BE electrostatic model. An adaptive truncation expansion of the 3D Laplace Green function is employed. The strong interaction between the mechanical and electrostatic systems is considered iteratively.

This paper aims to develop and then evaluate a novel consolidation and powder transfer mechanism for electrophotographic 3D printing, designed to overcome two longstanding limitations of electrophotographic 3D printing: fringing and a build height limitation.

Analysis of the electric field generated within electrophotographic printing was used to identify the underlying causes of the fringing and build height limitations. A prototype machine was then designed and manufactured to overcome these limitations, and a number of print runs were carried out as proof of concept studies.

The analysis suggested that a machine design which separated the electrostatic powder deposition of the print engine from the layer transfer and consolidation steps is required to overcome fringing and build height limitations. A machine with this build architecture was developed and proof of concept studies showed that the build height and fringing effects were no longer evident.

Electrophotography (EP) was initially seen as a promising technology for 3D printing, largely because the potential for multi-material printing at high speed. As these limitations can now be overcome, there is still potential for EP to deliver a high-speed 3D printing system which can build parts consisting of multiple materials.

The analysis of EP, the new method for the transfer and consolidation of layers and the proof of concept study are all original and provide new information on how EP can be adopted for 3D printing.

Combines the techniques of fast Fourier transforms, Buneman cyclic reduction and the capacity matrix in a finite difference Poisson solver specifically designed for modelling realistic electronic device structures. A solution may be determined on a number of connected rectangular regions which correctly accounts for continuity of the electric displacement at dielectric interfaces. Suggests the method is particularly well suited to problems requiring repeated solution with the same device structure and provides a self‐consistent Monte Carlo simulation as an example of such an application.

In this contribution, the aim is to present a nanoparticle device, operating in the visible regime based on the localized surface plasmon resonance (LSPR) phenomenon.

The nanoparticle electromagnetic properties are evaluated by a new analytical model and compared to the results obtained by numerical analysis.

A near-field enhancement is obtained by arranging the nanoparticles in a linear array. Analytical formulas, describing such enhancement, are presented.

The results demonstrate the possibility to use the proposed device for medical diagnostics and optoelectronics applications.

This paper addresses a significant research gap in the study of Rayleigh surface wave propagation within a piezoelectric medium characterized by piezoelectric properties, thermal effects and voids. Previous research has often overlooked the crucial aspects related to voids. This study aims to provide analytical solutions for Rayleigh waves propagating through a medium consisting of a nonlocal piezo-thermo-elastic material with voids under the Moore–Gibson–Thompson thermo-elasticity theory with memory dependencies.

The analytical solutions are derived using a wave-mode method, and roots are computed from the characteristic equation using the Durand–Kerner method. These roots are then filtered based on the decay condition of surface waves. The analysis pertains to a medium subjected to stress-free and isothermal boundary conditions.

Computational simulations are performed to determine the attenuation coefficient and phase velocity of Rayleigh waves. This investigation goes beyond mere calculations and examines particle motion to gain deeper insights into Rayleigh wave propagation. Furthermore, this investigates how kernel function and nonlocal parameters influence these wave phenomena.

The results of this study reveal several unique cases that significantly contribute to the understanding of Rayleigh wave propagation within this intricate material system, particularly in the presence of voids.

This investigation provides valuable insights into the synergistic dynamics among piezoelectric constituents, void structures and Rayleigh wave propagation, enabling advancements in sensor technology, augmented energy harvesting methodologies and pioneering seismic monitoring approaches.

This study formulates a novel governing equation for a nonlocal piezo-thermo-elastic medium with voids, highlighting the significance of Rayleigh waves and investigating the impact of memory.