Search results

Hexagonal honeycombs with meso-metric cell size show excellent load bearing and energy absorption potential, which make them attractive in many applications. However, owing to their bend-dominated structure, honeycombs are susceptible to deformation localization. The purpose of this study is to provide insight about shear band propagation in struts of 3D-printed honeycombs and its relation to the achieved macroscopic mechanical behavior.

Hexagonal honeycombs and unit cell models are 3D-printed by fused deposition modeling (FDM). The samples are exposed to compression loading and digital image correlation technique and finite element analyses are incorporated.

It is found that the strain contours, which are obtained by finite element, are in agreement with experimental measurements made by DIC. In addition, three stages of shear band propagation in struts of 3D-printed honeycombs are illustrated. Then the correlation between shear band propagation stages and the achieved macroscopic mechanical responses is discussed in detail.

For the first time, a hierarchical activation of different modes of shear band propagation in struts of a 3D-printed honeycomb is reported. This information can be of use for designing a new generation of honeycombs with tailor-made localization and energy absorption potential.

This study aims to propose a novel viscoelastic–viscoplastic combined constitutive model for glassy amorphous polymers within the framework of thermodynamics at finite strain that is capable of capturing their rate-dependent inelastic mechanical behavior in wide ranges of deformation rate and amount.

The rheology model whose viscoelastic and viscoplastic elements are connected in series is set in accordance with the multi-mechanism theory. Then, the constitutive functions are formulated on the basis of the multiplicative decomposition of the deformation gradient implicated by the rheology model within the framework of thermodynamics. Dynamic mechanical analysis (DMA) and loading/unloading/no-load tests for polycarbonate (PC) are conducted to identify the material parameters and demonstrate the capability of the proposed model.

The performance was validated in comparison with the series of the test results with different rates and amounts of deformation before unloading together. It has been confirmed that the proposed model can accommodate various material behaviors empirically observed, such as rate-dependent elasticity, elastic hysteresis, strain softening, orientation hardening and strain recovery.

This paper presents a novel rheological constitutive model in which the viscoelastic element connected in series with the viscoplastic one exclusively represents the elastic behavior, and each material response is formulated according to the multiplicatively decomposed deformation gradients. In particular, the yield strength followed by the isotropic hardening reflects the relaxation characteristics in the viscoelastic constitutive functions so that the glass transition temperature could be variant within the wide range of deformation rate. Consequently, the model enables us to properly represent the loading process up to large deformation regime followed by unloading and no-load processes.

The purpose of the work is to provide a comprehensive review of the digital image correlation (DIC) technique for those who are interested in performing the DIC technique in the area of manufacturing.

No methodology was used because the paper is a review article.

no fundings.

Herein, the historical development, main strengths and measurement setup of DIC are introduced. Subsequently, the basic principles of the DIC technique are outlined in detail. The analysis of measurement accuracy associated with experimental factors and correlation algorithms is discussed and some useful recommendations for reducing measurement errors are also offered. Then, the utilization of DIC in different manufacturing fields (e.g. cutting, welding, forming and additive manufacturing) is summarized. Finally, the current challenges and prospects of DIC in intelligent manufacturing are discussed.

This paper aims to present an adaptation of digital image correlation (DIC) to the electronics industry for reliability assessment of electronic packages. Two case studies are presented: one for warpage measurement of a micro-electro-mechanical system (MEMS) package under different temperature conditions and the other for the measurement of transient displacements on the surface of a printed circuit board (PCB) assembly under free-fall drop conditions, which is for explaining the typical camera setup requirement and comparing among different boundary conditions by fastening methods of PCB.

DIC warpage measurements on a small device, such as a MEMS package, require a special speckle pattern. A new method for the creation of speckle patterns was developed using carbon coating and aluminum evaporative deposition. To measure the transient response on the surface of a PCB during a free-fall impact event, three-dimensional (3D) DIC was integrated with synchronized stereo-high speed cameras. This approach enables the measurement of full-field displacement on the PCB surface during a free-fall impact event, contrary to the localized information that is obtained by the conventional strain gage and accelerometer method.

The authors suggest the proposed patterning method to the small-sized microelectronics packages for DIC measurements. More generally, the idea is to have a thin layer of the dark or bright color of the background and then apply the white or black colored pattern, respectively, so that the surface has high contrast. Also, to achieve a proper size of speckles, this paper does not want to expose the measuring objects to high temperatures or pressures during the sample preparation stage. Of course, it seems a complicated process to use aluminum evaporator, carbon coater and electroformed mesh. However, the authors intend to share one of the solutions to achieve a proper pattern on such small-sized electronic packages.

3D DIC technique can be successfully implemented for the measurement of micro-scale deformations in small packages (such as MEMS) and for the analysis of dynamic deformation of complex PCB.

This paper aims to investigate the effects of build parameters and strain rate on the mechanical properties of three-dimensional (3D) printed polylactic acid (PLA) by integrating digital image correlation and desirability function analysis. The build parameters included in this paper are the infill density, build orientation and layer height. These findings provide a framework for systematic mechanical characterization of 3D-printed PLA and potential ways of choosing process parameters to maximize performance for a given design.

The Taguchi method was used to shortlist a set of 18 different combinations of build parameters and testing conditions. Accordingly, 18 specimens were 3D printed using those combinations and put through a series of uniaxial tensions tests with digital image correlation. The mechanical properties deduced for all 18 tests were then used in a desirability function analysis where the mechanical properties were optimized to determine the ideal combination of build parameters and strain rate loading conditions.

By comparing the tensile mechanical experimental properties results between Taguchi's recommended parameters and the optimal parameter found from the response table of means, the composite desirability had increased by 2.08%. The tensile mechanical properties of the PLA specimens gradually decrease with an increase in the layer height, while they increase with increasing the infill densities. On the other hand, the mechanical properties have been affected by the build orientation and the strain rate in similar increasing/decreasing trends. Additionally, the obtained optimized results suggest that changing the infill density has a notable impact on the overall result, with a contribution of 48.61%. DIC patterns on the upright samples revealed bimodal strain patterns rendering them more susceptible to failures because of printing imperfections.

These findings provide a framework for systematic mechanical characterization of 3D-printed PLA and potential ways of choosing process parameters to maximize performance for a given design.

The weld region obtained during friction stir welding (FSW) of metallic materials (including aluminum alloys) contains typically well-defined zones, each characterized by fairly unique microstructure and properties. The purpose of this paper is to carry out combined experimental and numerical investigations of the mechanical properties of materials residing in different weld zones of FSW joints of thick AA2139-T8 plates.

Within the experimental investigation, the following has been conducted: first, optical-microscopy characterization of the transverse sections of the FSW joints, in order to help identify and delineate weld zones; second, micro hardness field generation over the same transverse section in order to reconfirm the location and the extent of various weld zones; third, extraction of miniature tensile specimens from different weld zones and their experimental testing; and finally, extraction of a larger size tensile specimen spanning transversely the FSW weld and its testing. Within the computational investigation, an effort was made to: first, validate the mechanical properties obtained using the miniature tensile specimens; and second, demonstrate the need for the use of the miniature tensile specimens.

It is argued that the availability of weld-zone material mechanical properties is critical since: first, these properties are often inferior relative to their base-metal counterparts; second, the width of the weld in thick metallic-armor is often comparable to the armor thickness, and therefore may represent a significant portion of the armor exposed-surface area; and finally, modeling of the weld-material structural response under loading requires the availability of high-fidelity/validated material constitutive models, and the development of such models requires knowledge of the weld-material mechanical properties.

The importance of determining the mechanical properties of the material in different parts of the weld zone with sufficient accuracy is demonstrated.

Additive manufacturing (AM) enables the production of lightweight parts with complex shapes and small dimensions. Recent improvements in AM techniques have allowed a significant growth of AM for industrial applications. In particular, AM is suitable for the production of materials shaped in lattice, which are very attractive for their lightweight design and their multi-functional properties. AM parts are often characterised by geometrical imperfections, residual porosity, high surface roughness which typically lead to stress/strain localisations and decreasing the resistance of the structure. This paper aims to focus on the study of the effects of geometrical irregularities and stress concentrations derived from them.

In this paper, several technique were combined: 3D tomography, experimental tests, digital image correlation and finite elements (FE) models based on both the as-designed and the as-manufactured geometries of lattice materials. The Digital Image Correlation technique allowed to measure local deformations in the specimen during the experimental test. The micro-computed tomography allowed to reconstruct the as-manufactured geometries of the specimens, from which the geometrical quality of the micro-structure is evaluated to run FE analyses.

Experimental and numerical results were compared by means of a stress concentration factor. This factor was calculated in three different specimens obtained from three-different printing processes to compare and understand their mechanical properties. Considering the as-designed geometry, it is not possible to model geometrical imperfections, and a FE model based on an as-manufactured geometry is needed. The results show that the mechanical properties of the printed samples are directly related to the statistical distribution of the stress concentration factor.

In this work, several techniques were combined to study the mechanical behaviour of lattice micro-structures. Lattice materials obtained by different selective laser melting printing parameters show different mechanical behaviours. A stress concentration factor can be assumed as a measure of the quality of these mechanical properties.

In recent years, additive manufacturing (AM) has started to be used for manufacturing real functional parts and assemblies for critical applications in aerospace, automotive, and machinery industries. Most complex or assembled parts require internal features (IF) such as holes, channels, slots, or guides for locational and mating requirements. Therefore, it is critical to understand and compare the structural and mechanical properties of additively manufactured and conventionally machined IFs.

In this study, mechanical and microstructural properties of Inconel 718 (Inc718) alloy internal features, manufactured either as-built with AM or machining of additively manufactured (AMed) part thereafter were investigated.

The results showed that the average ultimate tensile strength (UTS) of additively manufactured center internal feature (AM-IF) is almost analogous to the machined internal feature (M-IF). However, the yield strength of M-IF is greater than that of AM-IF due the greater surface roughness of the internal feature in AM-IF, which is deemed to surpass the effect of microstructure on the mechanical performance. The results of digital image correlation (DIC) analysis suggest that AM-IF and M-IF conditions have similar strain values under the same stress levels but the specimens with as built IF have a more locally ductile region around their IF, which is confirmed by hardness test results. But this does not change global elongation behavior. The microstructural evolution starting from as-built (AB) and heat-treated (HT) samples to specimens with IF are examined. The microstructure of HT specimens has bimodal grain structure with d phase while the AB specimens display a very fine dendritic microstructure with the presence of carbides. Although they both have close values, machined specimens have a higher frequency of finer grains based on SEM images.

It was shown that the concurrent creation of the IF during AM can provide a final part with a preserved ultimate tensile strength and elongation but a decreased yield strength. The variation in UTS of AM-IF increases due to the surface roughness near the internal feature as compared to smooth internal surfaces in M-IF. Hence, the outcomes of this study are believed to be valuable for the industry in terms of determining the appropriate production strategy of parts with IF using AM and postprocessing processes.

This study aims to evaluate and assess the elastoplastic properties of Ti-6Al-4V alloy manufactured by Arcam Q20 Plus electron beam melting (EBM) machine by a tensile test campaign and micro computerized tomography (microCT) imaging.

ASTM E8 tensile test specimens are designed and manufactured by EBM at an Arcam Q20 Plus machine. Surface quality is improved by machining to discard the effect of surface roughness. After surface machining, hot isostatic pressing (HIP) post-treatment is applied to half of the specimens to remove unsolicited internal defects. ASTM E8 tensile test campaign is carried out simultaneously with digital image correlation to acquire strain data for each sample. Finally, build direction and HIP post-treatment dependencies of elastoplastic properties are analyzed by F-test and t-test statistical analyses methods.

Modulus of elasticity presents isotropic behavior for each build direction according to F-test and t-test analysis. Yield and ultimate strengths vary according to build direction and post-treatment. Stiffness and strength properties are superior to conventional Ti-6Al-4V material; however, ductility turns out to be poor for aerospace structures compared to conventional Ti-6Al-4V alloy. In addition, micro CT images show that support structure leads to dense internal defects and pores at applied surfaces. However, HIP post-treatment diminishes those internal defects and pores thoroughly.

As a novel scientific contribution, this study investigates the effects of three orthogonal build directions on elastoplastic properties, while many studies focus on only two-build directions. Evaluation of Poisson’s ratio is the other originality of this study. Furthermore, another finding through micro CT imaging is that temporary support structures result in intense defects closer to applied surfaces; hence high-stress regions of structures should be avoided to use support structures.

This paper aims to manufacture Ti6Al4V/TiC functionally graded material (FGM) by direct laser deposition (DLD) using Ti6Al4V and TiC powder. The objective is to investigate the effect of process parameters and TiC composition on microstructure, Vickers hardness and mechanical properties.

Powder blends with three different volume percentages of Ti6Al4V and TiC were used as feed material for DLD process. Five experiments with different values of laser power and scan speed were conducted to investigate the effect on microstructure and Vickers hardness for different compositions of feed material. Mini-tensile tests were performed to evaluate the mechanical properties of the FGM samples. Digital image correlation (DIC) was applied to estimate Young’s modulus and ultimate tensile stress (UTS) of heterogeneous material.

This paper indicates that primary carbide, eutectic carbide and un-melted carbide phases are formed in the FGM deposit. As the energy density was increased, the primary and secondary dendrite arm spacing was found to increase. As TiC composition was increased, Young’s modulus increased and UTS decreased. The dendritic morphology of primary TiC growth was expected to cause low resistance for crack propagation, causing lower UTS values. Tensile specimens cut in vertical orientation were observed to possess higher values of Young’s modulus in comparison with specimens cut horizontally at low carbon content.

Current work presents unique and original contributions from the study of miniature FGM tensile specimens using DIC method. It investigates the effect of specimen orientation and TiC content on Young’s modulus and UTS. The relationship between energy density and dendritic arm spacing was evaluated. The relationship between laser power and scan speed with microstructure and Vickers hardness was investigated.