Search results

This paper sets out to summarize the current research, development, and integration of a hybrid process to produce high‐temperature metallic materials. It seeks to present the issues and solutions, including the understanding of the direct laser deposition process, and automated process planning.

Research in simulation and modeling, process development, integration, and actual part building for hybrid processing are discussed.

Coupling additive and subtractive processes into a single workstation, the integrated process, or hybrid process, can produce metal parts with machining accuracy and surface finish. Therefore, the hybrid process is potentially a very competitive process to fabricate metallic structures.

Rapid prototyping technology has been of interest to various industries that are looking for a process to produce/build a part directly from a CAD model in a short time. Among them, the direct laser deposition process is one of the few processes which directly manufacture a fully dense metal part without intermediate steps. Presented in this paper is the research, development, and system integration to resolve the challenges of the direct metal deposition process including building overhang structures, producing precision surfaces, and making parts with complex structures.

This paper aims to focus on reducing lead-time and energy consumption for laser-based metal deposition of Inconel-625 superalloy and to investigate the effect of process parameters on microstructure, density, surface roughness, dimensional accuracy and microhardness.

Inconel material was deposited on steel substrate by varying process parameters such as laser power, laser scan speed and powder flow rate. The deposited parts were characterized for their density, surface roughness, dimensional accuracy and microhardness.

The study reveals that with increase in laser power, laser scan speed and powder flow rate, there was an increase in density, surface roughness values and microhardness of the deposits, while there was a decrease in dimensional accuracy, deposition time and energy consumption.

The results of this study can be useful in fabrication of Inconel components by laser-based metal deposition process, and the methodology can be expanded to other materials to reduce the lead-time and energy consumption effectively.

The present study gives an understanding of effect of process parameters on density, surface roughness, dimensional accuracy, microhardness, deposition time and energy consumption for laser-based metal deposition of Inconel-625.

The purpose of this paper is to improve the dimensional accuracy of inclined thin-walled parts fabricated by laser direct metal deposition (DMD) under an open-loop control system.

In this study, a novel method of the adaptive slicing method and DMD process with feedback adjustment of deposition height has been developed to successively fabricate complex inclined thin-walled square tube elbow parts. The defocus amount was used as a variable to the matching between the deposition thickness and the adaptive slicing height.

The low relative error of dimensional accuracy between experimental and designed parts shows that the matching of the single-layer deposition thickness and the adaptive slicing height can be realized by optimizing the defocusing amount. The negative feedback of the thin-wall part height can be achieved when the defocus amount and the z-axis increment are less than deposition thickness. The improvement of dimensional accuracy of inclined thin-walled parts is also attributed to the optimized scanning strategy.

The slicing method and deposition process can provide technical guidance for other additive manufacturing (AM) systems to fabricate metal thin-walled parts with high dimensional accuracy because the feedback control of deposition height can be realized only by the optimized process.

This study provides a novel adaptive slice method and corresponding the deposition process, and expands the slicing method of AM metal parts.

The purpose of this paper is to review the state of the art of laser powder deposition (LPD), a solid freeform fabrication technique capable of fabricating fully dense functional items from a wide range of common engineering materials, such as aluminum alloys, steels, titanium alloys, nickel superalloys and refractory materials.

The main R&D efforts and the major issues related to LPD are revisited.

During recent years, a worldwide series of R&D efforts have been undertaken to develop and explore the capabilities of LPD and to tap into the possible cost and time savings and many potential applications that this technology offers.

These R&D efforts have produced a wealth of knowledge, the main points of which are highlighted herein.

This paper aims to achieve Ti-6Al-4V from Ti, Al and V elemental powder blends using direct laser deposition (DLD) and to understand the effects of laser transverse speed and laser power on the initial fabrication of deposit’s microstructure and Vickers hardness.

Two sets of powder blends with different weight percentage ratio for three elemental powder were used during DLD process. Five experiments with different processing parameters were performed to evaluate how microstructure and Vickers hardness change with laser power and laser transverse speed. Energy dispersive X-ray spectroscopy, optical microscopy and Vickers hardness test were used to analyze deposits’ properties.

This paper reveals that significant variance of elemental powder’s size and density would cause lack of weight percentage of certain elements in final part and using multiple coaxial powder nozzles design would be a solution. Also, higher laser power or slower laser transverse speed tend to benefit the formation of finer microstructures and increase Vickers hardness.

This paper demonstrates a new method to fabricate Ti-6Al-4V and gives out a possible weight percentage ratio 87:7:6 for Ti:Al:V at powder blends during DLD process. The relationship between microstructure and Vickers hardness with laser power and laser transverse speed would provide valuable reference for people working on tailoring material properties using elemental powder method.

Additive manufacturing is a fabrication technology with flexibility and economy. 18Ni300 is one of maraging steels with ultra-high strength, superior toughness, so it is an excellent candidate of structural material. This paper aims to explore the feasibility of using direct laser metal deposition method to fabricate18Ni300, and the evolution of its microstructure and defects is studied.

The experiments were conceived from single-trace-single-layer (STSL) test to multi-trace-multi-layers (MTML) test via single-trace-multi-layers (STML) test. The microstructure, defects and mechanical properties were analyzed.

The STML results showed that the columnar/equiaxed transformation occurred at the top part and the grain size increased with the layer number increasing, and it was explained by an innovative attempt combining columnar/equiaxed transformation model and the change of grain size. The MTML test with the interlayer orthogonal parallel reciprocating scanning pattern resulted in the grain growing along orthogonal directions; with the increase of overlap rate, the length and the area of the columnar grain decreased. What is more, the later deposition layer had lower micro-hardness value because of heat history.

Direct laser metal deposition method was a novel additive manufacturing method to manufacture 18Ni300 components, as 18Ni300 maraging steel was mainly manufactured by selective laser melting (SLM) method nowadays. It was useful to manufacture maraging steel parts using direct laser deposition method because it could manufacture larger parts than SLM method. Influence of processing parameters on forming quality and microstructure evolution was studied. The findings will be helpful to understand the forming mechanism of laser additive manufacturing of 18Ni300 components.

The purpose of this paper is to improve the forming efficiency and quality of unequal-width parts fabricated by laser direct metal deposition technology, some experiments were designed.

A new method by varying laser spot was adopted to fabricate unequal-width single track using one scanning rather than multi-track overlapping in the way of the inside-beam powder feeding, and the thin-walled parts were fabricated layer by layer. The theoretical model among layer thickness of z-axis, height of single track and the section curve order of single track was established.

The top surface unevenness of the thin-walled parts could be compensated automatically within the laser defocusing ranges from −2.5 to −5 mm and from 0.5 to 2.5 mm. The growth rate with the large width/height ratio was more than the small ratio, while the set height of the single track was uniform. The problem of non-uniform growth rate could be solved based on a stepped single-track method. The thin-walled parts with the smooth top surface was fabricated layer by layer which had a continuously variable width from 1 to 3 mm by splicing the laser defocusing range.

The shapes of the to-be-fabricated parts affect variable laser spot process in practical applications. For example, it will be difficult to apply variable laser spot process on the parts with the hole features.

This paper provided a guidance for forming unequal-width parts by laser direct metal deposition based on the inside-beam powder feeding.

Directed energy deposition (DED) with laser powder-feed is an additive manufacturing process that is used to produce metallic components by simultaneously providing a supply of energy from a laser and mass from a powder aerosol. The breadth of alloys used in DED is currently limited to a very small range as compared to wrought or cast alloys. The purpose of this paper is to develop the new alloys for DED is limited because current models to predict operational processing parameters are computationally expensive and trial-and-error based experiments are both expensive and time-consuming.

In this research, an agile DED model is presented to predict the geometry produced by a single layer deposit.

The utility of the model is demonstrated for type 304 L stainless steel and the significance of the predicted deposition regimes is discussed. The proposed model incorporates concepts from heat transfer, welding and laser cladding; and integrates them with experimental fits and physical models that are relevant to DED.

The utility of the model is demonstrated for type 304 L stainless steel and the significance of the predicted deposition regimes is discussed.

Direct energy deposition (DED) is an additive manufacturing process that allows to produce metal parts with complex shapes. DED process depends on several parameters, including laser power, deposition rate and powder feeding rate. It is important to control the manufacturing process to study the influence of the operating parameters on the final characteristics of these parts and to optimize them. Computational modeling helps engineers to address these challenges. This paper aims to establish a framework for the development, verification and application of meshless methods and surrogate models to the DED process.

Finite pointset method (FPM) is used to solve conservation equations involved in the DED process. A surrogate model is then established for the DED process using design of experiments with powder feeding rate, laser power and scanning speed as input parameters. The surrogate model is constructed using neutral networks (NN) approximations for the prediction of maximum temperature, clad angle and dilution.

The simulations of thin wall built of Ti-6Al-4V titanium alloy clearly demonstrated that FPM simulation is successful in predicting temperature distribution for different process conditions and compare favorably with experimental results from the literature. A methodology has been developed for obtaining a surrogate model for DED process.

This methodology shows how to achieve realistic simulations of DED process and how to construct a surrogate model for further use in optimization loop.

This paper aims to present a comprehensive review of the laser engineered net shaping (LENS) process in an attempt to provide the reader with a deep understanding of the controllable and fixed build parameters of metallic parts. The authors discuss the effect and interplay between process parameters, including: laser power, scan speed and powder feed rate. Further, the authors show the interplay between process parameters is pivotal in achieving the desired microstructure, macrostructure, geometrical accuracy and mechanical properties.

In this manuscript, the authors review current research examining the process inputs and their influences on the final product when manufacturing with the LENS process. The authors also discuss how these parameters relate to important build aspects such as melt-pool dimensions, the volume of porosity and geometry accuracy.

The authors conclude that studies have greatly enriched the understanding of the LENS build process, however, much studies remains to be done. Importantly, the authors reveal that to date there are a number of detailed theoretical models that predict the end properties of deposition, however, much more study is necessary to allow for reasonable prediction of the build process for standard industrial parts, based on the synchronistic behavior of the input parameters.

This paper intends to raise questions about the possible research areas that could potentially promote the effectiveness of this LENS technology.