Search results

Information and communications technology (ICT) offers enormous opportunities for individuals, businesses and society. The application of ICT is equally important to economic and non-economic activities. Researchers have increasingly focused on the adoption and use of ICT by small and medium enterprises (SMEs) as the economic development of a country is largely dependent on them. Following the success of ICT utilisation in SMEs in developed countries, many developing countries are looking to utilise the potential of the technology to develop SMEs. Past studies have shown that the contribution of ICT to the performance of SMEs is not clear and certain. Thus, it is crucial to determine the effectiveness of ICT in generating firm performance since this has implications for SMEs’ expenditure on the technology. This research examines the diffusion of ICT among SMEs with respect to the typical stages from innovation adoption to post-adoption, by analysing the actual usage of ICT and value creation. The mediating effects of integration and utilisation on SME performance are also studied. Grounded in the innovation diffusion literature, institutional theory and resource-based theory, this study has developed a comprehensive integrated research model focused on the research objectives. Following a positivist research paradigm, this study employs a mixed-method research approach. A preliminary conceptual framework is developed through an extensive literature review and is refined by results from an in-depth field study. During the field study, a total of 11 SME owners or decision-makers were interviewed. The recorded interviews were transcribed and analysed using NVivo 10 to refine the model to develop the research hypotheses. The final research model is composed of 30 first-order and five higher-order constructs which involve both reflective and formative measures. Partial least squares-based structural equation modelling (PLS-SEM) is employed to test the theoretical model with a cross-sectional data set of 282 SMEs in Bangladesh. Survey data were collected using a structured questionnaire issued to SMEs selected by applying a stratified random sampling technique. The structural equation modelling utilises a two-step procedure of data analysis. Prior to estimating the structural model, the measurement model is examined for construct validity of the study variables (i.e. convergent and discriminant validity).

The estimates show cognitive evaluation as an important antecedent for expectation which is shaped primarily by the entrepreneurs’ beliefs (perception) and also influenced by the owners’ innovativeness and culture. Culture further influences expectation. The study finds that facilitating condition, environmental pressure and country readiness are important antecedents of expectation and ICT use. The results also reveal that integration and the degree of ICT utilisation significantly affect SMEs’ performance. Surprisingly, the findings do not reveal any significant impact of ICT usage on performance which apparently suggests the possibility of the ICT productivity paradox. However, the analysis finally proves the non-existence of the paradox by demonstrating the mediating role of ICT integration and degree of utilisation explain the influence of information technology (IT) usage on firm performance which is consistent with the resource-based theory. The results suggest that the use of ICT can enhance SMEs’ performance if the technology is integrated and properly utilised. SME owners or managers, interested stakeholders and policy makers may follow the study’s outcomes and focus on ICT integration and degree of utilisation with a view to attaining superior organisational performance.

This study urges concerned business enterprises and government to look at the environmental and cultural factors with a view to achieving ICT usage success in terms of enhanced firm performance. In particular, improving organisational practices and procedures by eliminating the traditional power distance inside organisations and implementing necessary rules and regulations are important actions for managing environmental and cultural uncertainties. The application of a Bengali user interface may help to ensure the productivity of ICT use by SMEs in Bangladesh. Establishing a favourable national technology infrastructure and legal environment may contribute positively to improving the overall situation. This study also suggests some changes and modifications in the country’s existing policies and strategies. The government and policy makers should undertake mass promotional programs to disseminate information about the various uses of computers and their contribution in developing better organisational performance. Organising specialised training programs for SME capacity building may succeed in attaining the motivation for SMEs to use ICT. Ensuring easy access to the technology by providing loans, grants and subsidies is important. Various stakeholders, partners and related organisations should come forward to support government policies and priorities in order to ensure the productive use of ICT among SMEs which finally will help to foster Bangladesh’s economic development.

This study aims to carry out a critical analysis of the methods used to deal with the regulatory impact assessment while proposing an alternative method to overcome some of the drawbacks of the aforementioned methods.

To achieve the objective of this work, the methods currently used in regulatory impact analysis are presented by highlighting their scope and the problems they may pose during their applications. After that, the adjusted variant of radial measure is suggested as an alternative method to the aforementioned methods while showing its relevance with regard to other methods using pertinent criteria. Finally, for concretization, a case study related to the sanctions against Russia after its invasion of Ukraine is presented.

The findings show that regulations related to the sanctions against Russia are good enough, with a score of 0.846. However, this score is less good in several countries like Germany (0.671), Italy (0.677) and France (0.745) and in the poorest countries.

The originality of this work resides in using a novel method in the regulatory impact analysis field, which is adjusted variant of radial measure. This method increases the effectiveness of the regulatory impact assessment.

The objective of this study is to investigate how country risk, different political actions from the government and bureaucratic behavior influence the activities in industry supply chains (SCs) in emerging markets. The main objective of this study is to investigate the influence of these external stakeholders’ elements to the demand-side and supply-side drivers and barriers for improving competitiveness of Ready-Made Garment (RMG) industry in the way of analyzing supply chain. Considering the phenomenon of recent change in the RMG business environment and the competitiveness issues this study uses the principles of stakeholder and resource dependence theory and aims to find out some factors which influence to make an efficient supply chain for improving competitiveness. The RMG industry of Bangladesh is the case application of this study. Following a positivist paradigm, this study adopts a two phase sequential mixed-method research design consisting of qualitative and quantitative approaches. A tentative research model is developed first based on extensive literature review. Qualitative field study is then carried out to fine tune the initial research model. Findings from the qualitative method are also used to develop measures and instruments for the next phase of quantitative method. A survey is carried out with sample of top and middle level executives of different garment companies of Dhaka city in Bangladesh and the collected quantitative data are analyzed by partial least square-based structural equation modeling. The findings support eight hypotheses. From the analysis the external stakeholders’ elements like bureaucratic behavior and country risk have significant influence to the barriers. From the internal stakeholders’ point of view the manufacturers’ and buyers’ drivers have significant influence on the competitiveness. Therefore, stakeholders need to take proper action to reduce the barriers and increase the drivers, as the drivers have positive influence to improve competitiveness.

This study has both theoretical and practical contributions. This study represents an important contribution to the theory by integrating two theoretical perceptions to identify factors of the RMG industry’s SC that affect the competitiveness of the RMG industry. This research study contributes to the understanding of both external and internal stakeholders of national and international perspectives in the RMG (textile and clothing) business. It combines the insights of stakeholder and resource dependence theories along with the concept of the SC in improving effectiveness. In a practical sense, this study certainly contributes to the Bangladeshi RMG industry. In accordance with the desire of the RMG manufacturers, the research has shown that some influential constructs of the RMG industry’s SC affect the competitiveness of the RMG industry. The outcome of the study is useful for various stakeholders of the Bangladeshi RMG industry sector ranging from the government to various private organizations. The applications of this study are extendable through further adaptation in other industries and various geographic contexts.

Smart card-based E-payment systems are receiving increasing attention as the number of implementations is witnessed on the rise globally. Understanding of user adoption behavior of E-payment systems that employ smart card technology becomes a research area that is of particular value and interest to both IS researchers and professionals. However, research interest focuses mostly on why a smart card-based E-payment system results in a failure or how the system could have grown into a success. This signals the fact that researchers have not had much opportunity to critically review a smart card-based E-payment system that has gained wide support and overcome the hurdle of critical mass adoption. The Octopus in Hong Kong has provided a rare opportunity for investigating smart card-based E-payment system because of its unprecedented success. This research seeks to thoroughly analyze the Octopus from technology adoption behavior perspectives.

Cultural impacts on adoption behavior are one of the key areas that this research posits to investigate. Since the present research is conducted in Hong Kong where a majority of population is Chinese ethnicity and yet is westernized in a number of aspects, assuming that users in Hong Kong are characterized by eastern or western culture is less useful. Explicit cultural characteristics at individual level are tapped into here instead of applying generalization of cultural beliefs to users to more accurately reflect cultural bias. In this vein, the technology acceptance model (TAM) is adapted, extended, and tested for its applicability cross-culturally in Hong Kong on the Octopus. Four cultural dimensions developed by Hofstede are included in this study, namely uncertainty avoidance, masculinity, individualism, and Confucian Dynamism (long-term orientation), to explore their influence on usage behavior through the mediation of perceived usefulness.

TAM is also integrated with the innovation diffusion theory (IDT) to borrow two constructs in relation to innovative characteristics, namely relative advantage and compatibility, in order to enhance the explanatory power of the proposed research model. Besides, the normative accountability of the research model is strengthened by embracing two social influences, namely subjective norm and image. As the last antecedent to perceived usefulness, prior experience serves to bring in the time variation factor to allow level of prior experience to exert both direct and moderating effects on perceived usefulness.

The resulting research model is analyzed by partial least squares (PLS)-based Structural Equation Modeling (SEM) approach. The research findings reveal that all cultural dimensions demonstrate direct effect on perceived usefulness though the influence of uncertainty avoidance is found marginally significant. Other constructs on innovative characteristics and social influences are validated to be significant as hypothesized. Prior experience does indeed significantly moderate the two influences that perceived usefulness receives from relative advantage and compatibility, respectively. The research model has demonstrated convincing explanatory power and so may be employed for further studies in other contexts. In particular, cultural effects play a key role in contributing to the uniqueness of the model, enabling it to be an effective tool to help critically understand increasingly internationalized IS system development and implementation efforts. This research also suggests several practical implications in view of the findings that could better inform managerial decisions for designing, implementing, or promoting smart card-based E-payment system.

Citizens are substantial stakeholders in every e-government system, thus their willingness to use and ability to access the system are critical. Unequal access and information and communication technology usage, which is known as digital divide, however has been identified as one of the major obstacles to the implementation of e-government system. As digital divide inhibits citizen’s acceptance to e-government, it should be overcome despite the lack of deep theoretical understanding on this issue. This research aimed to investigate the digital divide and its direct impact on e-government system success of local governments in Indonesia as well as indirect impact through the mediation role of trust. In order to get a comprehensive understanding of digital divide, this study introduced a new type of digital divide, the innovativeness divide.

The research problems were approached by applying two-stage sequential mixed method research approach comprising of both qualitative and quantitative studies. In the first phase, an initial research model was proposed based on a literature review. Semi-structured interview with 12 users of e-government systems was then conducted to explore and enhance this initial research model. Data collected in this phase were analyzed with a two-stage content analysis approach and the initial model was then amended based on the findings. As a result, a comprehensive research model with 16 hypotheses was proposed for examination in the second phase.

In the second phase, quantitative method was applied. A questionnaire was developed based on findings in the first phase. A pilot study was conducted to refine the questionnaire, which was then distributed in a national survey resulting in 237 useable responses. Data collected in this phase were analyzed using Partial Least Square based Structural Equation Modeling.

The results of quantitative analysis confirmed 13 hypotheses. All direct influences of the variables of digital divide on e-government system success were supported. The mediating effects of trust in e-government in the relationship between capability divide and e-government system success as well as in the relationship between innovativeness divide and e-government system success were supported, but was rejected in the relationship between access divide and e-government system success. Furthermore, the results supported the moderating effects of demographic variables of age, residential place, and education.

This research has both theoretical and practical contributions. The study contributes to the developments of literature on digital divide and e-government by providing a more comprehensive framework, and also to the implementation of e-government by local governments and the improvement of e-government Readiness Index of Indonesia.

The European Union’s Digital Markets Act (DMA) calls for far-reaching changes to the way economic activity will occur in EU digital markets. Before its remedies are imposed, it is critical to assess their impacts on individual markets, the digital sector, and the overall European economy. The European Commission (EC) released an Impact Assessment in support of the DMA that purports to evaluate it using cost/benefit analysis.

An economic evaluation of the DMA should consider its full impacts on dynamic competition. The Impact Assessment neither assesses the DMA's impact on dynamic competition in the digital economy nor evaluates the impacts of specific DMA prohibitions and obligations. Instead, it considers benefits in general and largely ignores costs. We study its benefit assessments and find they are based on highly inappropriate methodologies and assumptions. A cost/benefit study using inappropriate methodologies and largely ignoring costs cannot provide a sound policy assessment.

Instead of promoting dynamic competition between platforms, the DMA will likely reinforce existing market structures, ossify market boundaries, and stunt European innovation. The DMA is likely to chill R&D by encouraging free riding on the investments of others, which discourages making those investments. Avoiding harm to innovation is critical because innovation delivers large, positive spillover benefits, driving increases in productivity, employment, wages, and prosperity.

The DMA prioritizes static over dynamic competition, with the potential to harm the European economy. Given this, the Impact Assessment does not demonstrate that the DMA will be beneficial overall, and its implementation must be carefully tailored to alleviate or lessen its potential to harm Europe’s economic performance.

Aim of the present monograph is the economic analysis of the role of MNEs regarding globalisation and digital economy and in parallel there is a reference and examination of some legal aspects concerning MNEs, cyberspace and e‐commerce as the means of expression of the digital economy. The whole effort of the author is focused on the examination of various aspects of MNEs and their impact upon globalisation and vice versa and how and if we are moving towards a global digital economy.

The Bureau of Economics in the Federal Trade Commission has a three-part role in the Agency and the strength of its functions changed over time depending on the preferences and ideology of the FTC’s leaders, developments in the field of economics, and the tenor of the times. The over-riding current role is to provide well considered, unbiased economic advice regarding antitrust and consumer protection law enforcement cases to the legal staff and the Commission. The second role, which long ago was primary, is to provide reports on investigations of various industries to the public and public officials. This role was more recently called research or “policy R&D”. A third role is to advocate for competition and markets both domestically and internationally. As a practical matter, the provision of economic advice to the FTC and to the legal staff has required that the economists wear “two hats,” helping the legal staff investigate cases and provide evidence to support law enforcement cases while also providing advice to the legal bureaus and to the Commission on which cases to pursue (thus providing “a second set of eyes” to evaluate cases). There is sometimes a tension in those functions because building a case is not the same as evaluating a case. Economists and the Bureau of Economics have provided such services to the FTC for over 100 years proving that a sub-organization can survive while playing roles that sometimes conflict. Such a life is not, however, always easy or fun.