Search results

Aim of the present monograph is the economic analysis of the role of MNEs regarding globalisation and digital economy and in parallel there is a reference and examination of some legal aspects concerning MNEs, cyberspace and e‐commerce as the means of expression of the digital economy. The whole effort of the author is focused on the examination of various aspects of MNEs and their impact upon globalisation and vice versa and how and if we are moving towards a global digital economy.

This study aims to carry out a critical analysis of the methods used to deal with the regulatory impact assessment while proposing an alternative method to overcome some of the drawbacks of the aforementioned methods.

To achieve the objective of this work, the methods currently used in regulatory impact analysis are presented by highlighting their scope and the problems they may pose during their applications. After that, the adjusted variant of radial measure is suggested as an alternative method to the aforementioned methods while showing its relevance with regard to other methods using pertinent criteria. Finally, for concretization, a case study related to the sanctions against Russia after its invasion of Ukraine is presented.

The findings show that regulations related to the sanctions against Russia are good enough, with a score of 0.846. However, this score is less good in several countries like Germany (0.671), Italy (0.677) and France (0.745) and in the poorest countries.

The originality of this work resides in using a novel method in the regulatory impact analysis field, which is adjusted variant of radial measure. This method increases the effectiveness of the regulatory impact assessment.

The Bureau of Economics in the Federal Trade Commission has a three-part role in the Agency and the strength of its functions changed over time depending on the preferences and ideology of the FTC’s leaders, developments in the field of economics, and the tenor of the times. The over-riding current role is to provide well considered, unbiased economic advice regarding antitrust and consumer protection law enforcement cases to the legal staff and the Commission. The second role, which long ago was primary, is to provide reports on investigations of various industries to the public and public officials. This role was more recently called research or “policy R&D”. A third role is to advocate for competition and markets both domestically and internationally. As a practical matter, the provision of economic advice to the FTC and to the legal staff has required that the economists wear “two hats,” helping the legal staff investigate cases and provide evidence to support law enforcement cases while also providing advice to the legal bureaus and to the Commission on which cases to pursue (thus providing “a second set of eyes” to evaluate cases). There is sometimes a tension in those functions because building a case is not the same as evaluating a case. Economists and the Bureau of Economics have provided such services to the FTC for over 100 years proving that a sub-organization can survive while playing roles that sometimes conflict. Such a life is not, however, always easy or fun.

The objective of this study is to investigate how country risk, different political actions from the government and bureaucratic behavior influence the activities in industry supply chains (SCs) in emerging markets. The main objective of this study is to investigate the influence of these external stakeholders’ elements to the demand-side and supply-side drivers and barriers for improving competitiveness of Ready-Made Garment (RMG) industry in the way of analyzing supply chain. Considering the phenomenon of recent change in the RMG business environment and the competitiveness issues this study uses the principles of stakeholder and resource dependence theory and aims to find out some factors which influence to make an efficient supply chain for improving competitiveness. The RMG industry of Bangladesh is the case application of this study. Following a positivist paradigm, this study adopts a two phase sequential mixed-method research design consisting of qualitative and quantitative approaches. A tentative research model is developed first based on extensive literature review. Qualitative field study is then carried out to fine tune the initial research model. Findings from the qualitative method are also used to develop measures and instruments for the next phase of quantitative method. A survey is carried out with sample of top and middle level executives of different garment companies of Dhaka city in Bangladesh and the collected quantitative data are analyzed by partial least square-based structural equation modeling. The findings support eight hypotheses. From the analysis the external stakeholders’ elements like bureaucratic behavior and country risk have significant influence to the barriers. From the internal stakeholders’ point of view the manufacturers’ and buyers’ drivers have significant influence on the competitiveness. Therefore, stakeholders need to take proper action to reduce the barriers and increase the drivers, as the drivers have positive influence to improve competitiveness.

This study has both theoretical and practical contributions. This study represents an important contribution to the theory by integrating two theoretical perceptions to identify factors of the RMG industry’s SC that affect the competitiveness of the RMG industry. This research study contributes to the understanding of both external and internal stakeholders of national and international perspectives in the RMG (textile and clothing) business. It combines the insights of stakeholder and resource dependence theories along with the concept of the SC in improving effectiveness. In a practical sense, this study certainly contributes to the Bangladeshi RMG industry. In accordance with the desire of the RMG manufacturers, the research has shown that some influential constructs of the RMG industry’s SC affect the competitiveness of the RMG industry. The outcome of the study is useful for various stakeholders of the Bangladeshi RMG industry sector ranging from the government to various private organizations. The applications of this study are extendable through further adaptation in other industries and various geographic contexts.

Information and communications technology (ICT) offers enormous opportunities for individuals, businesses and society. The application of ICT is equally important to economic and non-economic activities. Researchers have increasingly focused on the adoption and use of ICT by small and medium enterprises (SMEs) as the economic development of a country is largely dependent on them. Following the success of ICT utilisation in SMEs in developed countries, many developing countries are looking to utilise the potential of the technology to develop SMEs. Past studies have shown that the contribution of ICT to the performance of SMEs is not clear and certain. Thus, it is crucial to determine the effectiveness of ICT in generating firm performance since this has implications for SMEs’ expenditure on the technology. This research examines the diffusion of ICT among SMEs with respect to the typical stages from innovation adoption to post-adoption, by analysing the actual usage of ICT and value creation. The mediating effects of integration and utilisation on SME performance are also studied. Grounded in the innovation diffusion literature, institutional theory and resource-based theory, this study has developed a comprehensive integrated research model focused on the research objectives. Following a positivist research paradigm, this study employs a mixed-method research approach. A preliminary conceptual framework is developed through an extensive literature review and is refined by results from an in-depth field study. During the field study, a total of 11 SME owners or decision-makers were interviewed. The recorded interviews were transcribed and analysed using NVivo 10 to refine the model to develop the research hypotheses. The final research model is composed of 30 first-order and five higher-order constructs which involve both reflective and formative measures. Partial least squares-based structural equation modelling (PLS-SEM) is employed to test the theoretical model with a cross-sectional data set of 282 SMEs in Bangladesh. Survey data were collected using a structured questionnaire issued to SMEs selected by applying a stratified random sampling technique. The structural equation modelling utilises a two-step procedure of data analysis. Prior to estimating the structural model, the measurement model is examined for construct validity of the study variables (i.e. convergent and discriminant validity).

The estimates show cognitive evaluation as an important antecedent for expectation which is shaped primarily by the entrepreneurs’ beliefs (perception) and also influenced by the owners’ innovativeness and culture. Culture further influences expectation. The study finds that facilitating condition, environmental pressure and country readiness are important antecedents of expectation and ICT use. The results also reveal that integration and the degree of ICT utilisation significantly affect SMEs’ performance. Surprisingly, the findings do not reveal any significant impact of ICT usage on performance which apparently suggests the possibility of the ICT productivity paradox. However, the analysis finally proves the non-existence of the paradox by demonstrating the mediating role of ICT integration and degree of utilisation explain the influence of information technology (IT) usage on firm performance which is consistent with the resource-based theory. The results suggest that the use of ICT can enhance SMEs’ performance if the technology is integrated and properly utilised. SME owners or managers, interested stakeholders and policy makers may follow the study’s outcomes and focus on ICT integration and degree of utilisation with a view to attaining superior organisational performance.

This study urges concerned business enterprises and government to look at the environmental and cultural factors with a view to achieving ICT usage success in terms of enhanced firm performance. In particular, improving organisational practices and procedures by eliminating the traditional power distance inside organisations and implementing necessary rules and regulations are important actions for managing environmental and cultural uncertainties. The application of a Bengali user interface may help to ensure the productivity of ICT use by SMEs in Bangladesh. Establishing a favourable national technology infrastructure and legal environment may contribute positively to improving the overall situation. This study also suggests some changes and modifications in the country’s existing policies and strategies. The government and policy makers should undertake mass promotional programs to disseminate information about the various uses of computers and their contribution in developing better organisational performance. Organising specialised training programs for SME capacity building may succeed in attaining the motivation for SMEs to use ICT. Ensuring easy access to the technology by providing loans, grants and subsidies is important. Various stakeholders, partners and related organisations should come forward to support government policies and priorities in order to ensure the productive use of ICT among SMEs which finally will help to foster Bangladesh’s economic development.

Healthcare regulation is one means to address quality challenges in healthcare systems and is carried out using compliance, deterrence and/or improvement approaches. The four countries of the UK provide an opportunity to explore and compare different regulatory architecture and models. The purpose of this paper is to understand emerging regulatory models and associated tensions.

This paper uses qualitative methods to compare the regulatory architecture and models. Data were collected from documents, including board papers, inspection guidelines and from 48 interviewees representing a cross-section of roles from six organisational regulatory agencies. The data were analysed thematically using an a priori coding framework developed from the literature.

The findings show that regulatory agencies in the four countries of the UK have different approaches and methods of delivering their missions. This study finds that new hybrid regulatory models are developing which use improvement support interventions in parallel with deterrence and compliance approaches. The analysis highlights that effective regulatory oversight of quality is contingent on the ability of regulatory agencies to balance their requirements to assure and improve care. Nevertheless, they face common tensions in sustaining the balance in their requirements connected to their roles, relationships and resources.

The paper shows through its comparison of UK regulatory agencies that the development and implementation of hybrid models is complex. The paper contributes to research by identifying three tensions related to hybrid regulatory models; roles, resources and relationships which need to be managed to sustain hybrid regulatory models.

Government agencies have endeavored, with limited success, to improve the methodological consistency of regulatory benefit–cost analysis (BCA). This paper recommends that an independent cohort of economists, policy analysts and legal scholars take on that task. Independently established “best practices” would have four positive effects: (1) they would render BCAs more regular in form and format and, thus, more readily assessable and replicable by social scientists; (2) improved consistency might marginally reduce political opposition to BCA as a policy tool; (3) politically-motivated, inter-agency methodological disputes might be avoided; and (4) an independent set of “best practices” would provide a sound, independent basis for judicial review of agency BCAs.

In the last four years, since Volume I of this Bibliography first appeared, there has been an explosion of literature in all the main functional areas of business. This wealth of material poses problems for the researcher in management studies — and, of course, for the librarian: uncovering what has been written in any one area is not an easy task. This volume aims to help the librarian and the researcher overcome some of the immediate problems of identification of material. It is an annotated bibliography of management, drawing on the wide variety of literature produced by MCB University Press. Over the last four years, MCB University Press has produced an extensive range of books and serial publications covering most of the established and many of the developing areas of management. This volume, in conjunction with Volume I, provides a guide to all the material published so far.

The RAF method for regulation, assessment, follow‐up and continuous improvement of quality of care was developed in Israel in the late 1980s by the Quality of Care Unit at the JDC‐Brookdale Institute. The goal of the RAF method is to continuously increase the level of quality in organizations providing any kind of a service. This article presents the developmental processes for the method’s adaptation to a specific regulatory service – its structuring, implementation and assimilation – based on our experience in developing and implementing the RAF method in Israel. It describes how the RAF method encourages the development of reliable data bases, adaptation of the organizational structure, and introduction of a positive ideology that together promote changes leading to continuous improvement in quality of care.