Search results

The purpose of this study is to compare the prediction models for half-cell potential (HCP) of RCC slabs cathodically protected using pure magnesium anodes and subjected to chloride ingress.The models for HCP using 1,134 data set values based on experimentation are developed and compared using ANFIS, artificial neural network (ANN) and integrated ANN-GA algorithms.

In this study, RCC slabs, 1000 mm × 1000 mm × 100 mm were cast. Five slabs were cast with 3.5% NaCl by weight of cement, and five more were cast without NaCl. The distance of the point under consideration from the anode in the x- and y-axes, temperature, relative humidity and age of the slab in days were the input parameters, while the HCP values with reference to the Standard Calomel Electrode were the output. Experimental values consisting of 80 HCP values per slab per day were collected for 270 days and were averaged for both cases to generate the prediction model.

In this study, the premise and consequent parameters are trained, validated and tested using ANFIS, ANN and by using ANN as fitness function of GA. The MAPE, RMSE and MAE of the ANFIS model were 24.57, 1702.601 and 871.762, respectively. Amongst the ANN algorithms, Levenberg−Marquardt (LM) algorithm outperforms the other methods, with an overall R-value of 0.983. GA with ANN as the objective function proves to be the best means for the development of prediction model.

Based on the original experimental values, the performance of ANFIS, ANN and GA with ANN as objective function provides excellent results.

This study aims to assess support vector machine (SVM) models' predictive ability to estimate half-cell potential (HCP) values from input parameters by using Bayesian optimization, grid search and random search.

A data set with 1,134 rows and 6 columns is used for principal component analysis (PCA) to minimize dimensionality and preserve 95% of explained variance. HCP is output from temperature, age, relative humidity, X and Y lengths. Root mean square error (RMSE), R-squared, mean squared error (MSE), mean absolute error, prediction speed and training time are used to measure model effectiveness. SHAPLEY analysis is also executed.

The study reveals variations in predictive performance across different optimization methods, with RMSE values ranging from 18.365 to 30.205 and R-squared values spanning from 0.88 to 0.96. Additionally, differences in training times, prediction speeds and model complexities are observed, highlighting the trade-offs between model accuracy and computational efficiency.

This study contributes to the understanding of SVM model efficacy in HCP prediction, emphasizing the importance of optimization techniques, model complexity and dimensionality reduction methods such as PCA.

At present, research on the preparation of corrosion inhibitors using modified pyrimidine derivatives is still blank. The purpose of this study is to synthesize a new cationic mercaptopyrimidine derivative quaternary ammonium salt, known as DTEBTAC, that can be used as a corrosion inhibitor to slow down the metal corrosion problems encountered in oil and gas extraction processes.

A new corrosion inhibitor was synthesized by the reaction of anti-Markovnikov addition and nucleophilic substitution. The weight loss method was used to study the corrosion inhibition characteristics of synthetic corrosion inhibitors. Electrochemical and surface topography analyses were used to determine the type of inhibitor and the adsorption state formed on the surface of N80 steel. Molecular dynamics simulations and quantum chemistry calculations were used to investigate the synthetic corrosion inhibitor’s molecular structure and corrosion inhibition mechanisms.

The results of the weight loss method show that when the dosage of DTEBTAC is 1%, the corrosion rate of N80 steel in hydrochloric acid solution at 90? is 3.3325 g m-2 h-1. Electrochemical and surface morphology analysis show that DTEBTAC can form a protective layer on the surface of N80 steel, and is a hybrid corrosion inhibitor that can inhibit the main anode. Quantum chemical parameter calculation shows that DTEBTAC has a better corrosion inhibition effect than DTP. The molecular dynamics simulation results show that DTEBTAC has stronger binding energy than DTP, and forms a network packing structure through hydrogen bonding, and the adsorption stability is enhanced.

A novel cationic mercaptopyrimidine derivative quaternium-ammonium salt corrosion inhibitor was designed and provided. Compared with the prior art, the preparation method of the synthesized mercaptopyrimidine derivative quaternary ammonium salt corrosion inhibitor is simple, and the presence of nitrogen-positive ions, sulfur atoms and nitrogen-rich atoms has an obvious corrosion inhibition effect, which can be used to inhibit metal corrosion during oil and gas field exploitation. It not only expands the application field of new materials but also provides a new idea for the research and development of new corrosion inhibitors.

To improve the corrosion resistance of magnesium alloys, the construction of protective coatings is necessary to extend the service life of Mg-based materials.

SiO₂ nanoparticles modified by dodecyltrimethoxysilane (DTMS) were added to the PP and a superhydrophobic Mg(OH)₂/PP-60mSiO₂ composite coating was fabricated on the surface of AZ31 magnesium alloy via the hydrothermal method and subsequently the immersion treatment.

Hydrophilic SiO₂ nanoparticles become hydrophobic after modified by DTMS, showing a higher dispersibility in xylene. By incorporating modified SiO₂ nanoparticles into the composite PP coating, the hydrophobicity of the layer was enhanced, resulting in a contact angle of 166.3° and a sliding angle of 3.4°. It also improved the water repellency and durability of the coating. Furthermore, the intermediate layer of Mg(OH)₂ significantly strengthened the bond between the PP layer and the substrate. The Mg(OH)₂/PP-60mSiO₂ composite coating significantly enhances the corrosion resistance of the magnesium alloy by effectively blocking the infiltration of the corrosion anions during corrosion. The corrosion current density of the Mg(OH)₂/PP-60mSiO₂ composite coating is approximately 8.23 × 10^–9 A·cm^-2, which can achieve a magnitude three times lower than its substrate, making it a promising surface modification for the Mg alloy.

The composite coating effectively and durably enhances the corrosion resistance of magnesium alloys.

This paper aims to control the deformation of a thin wall CrZrCu cylinder components (wall thickness 5 mm, diameter 400 mm) during thermal spray alumina-titania (AT13) coating by adjusting the spray parameters without deteriorating its quality evidently.

The deformation was controlled by lowering the temperature of the component in the way of adjusting the spray parameters. The main parameters adjust included extending the spraying distance, from normally 120 mm to 140 mm, decreasing plasma power from 50to 42 kW. An alumina-titanium (AT13) ceramic coating was chosen for protecting the substrate from corrosion. Microscopic morphology and phase analysis, insulation resistance testing, neutral salt test and electrochemical method were used to analyze the anti-corrosion and insulation performances of the coating.

The results indicate that, after adjusting the spraying parameters, the coating has a relatively high porosity, with an average value of 8.96 ± 0.77%. The bonding strength of the coating is relatively low, with an average value of 17.69 ± 0.85 MPa. However, after sealing, the polarization resistance of the coating in seawater can be maintained above 6.25 × 10⁶ Ω.cm² for an extended period. The coating has a high resistance (=1.1 M Ω), and there is no apparent galvanic corrosion when contacted with TC4 alloy. Additionally, analysis of corrosion products on the sample surface reveals that the samples with sprayed alumina-titanium ceramic show no copper corrosion products on the surface, and the coating remains intact, effectively isolating the corrosive medium.

By adjusting the spraying parameters, the deformation of the cylinder thin-walled component can be effectively controlled, making the φ 400 × 392 mm (thickness 5 mm) CrZrCu cylinder com-ponent with a maximum diameter deformation of only 0.14 mm. The satisfactory corrosion performances can be achieved under adjusting spraying parameters, which can guarantee the application of ceramic coating for weapon launching system of naval ships.

Corrosion thinning reduces the effective cross-sectional areas of steel structures and degrades their mechanical properties. This study aims to investigate the relationship between the corrosion thinning of carbon steel for transmission towers and the degradation of its mechanical properties.

A macroscopic finite element model of a transmission tower was established and then combined with the corrosion thinning and mechanical properties of Q355 steel in different test periods measured in neutral salt spray, SO₂ atmosphere and wet heat environments to conduct a finite element simulation of a transmission tower with different corrosion thinning of Q355 steel.

When the residual thickness of the tower leg angle was reduced to 4.03 mm, the maximum stress solved in the simulation exceeded the yield strength, with the tower already at risk of collapse owing to corrosion failure under extreme conditions of basic wind speed.

This study innovatively utilises transmission tower finite element models and experimental data from mechanical degradation experiments to quantify the relationship between corrosion thinning and the mechanical properties of Q355 steel, ensuring the effective assessment of the mechanical properties of corroded transmission towers.

Polyaniline (PANI) has garnered attention for its potential applications in anticorrosion fields because of its unique properties. Satisfactory outcomes have been achieved when using PANI as a functional filler in organic coatings. More recently, research has extensively explored PANI-based organic coatings with self-healing properties. The purpose of this paper is to provide a summary of the active agents, methods and mechanisms involved in the self-healing of organic coatings.

This study uses specific doped acids and metal corrosion inhibitors as active and self-healing agents to modify PANI using the methods of oxidation polymerization, template synthesis, nanosheet carrier and nanocontainer loading methods. The anticorrosion performance of the coatings is evaluated using EIS, LEIS and salt spray tests.

Specific doped acids and metal corrosion inhibitors are used as active agents to modify PANI and confer self-healing properties to the coatings. The coatings’ active protection mechanism encompasses PANI’s own passivation ability, the adsorption of active agents and the creation of insoluble compounds or complexes.

This paper summarizes the active agents used to modify PANI, the procedures used for modification and the self-healing mechanism of the composite coatings. It also proposes future directions for developing PANI organic coatings with self-healing capabilities. The summaries and proposals presented may facilitate large-scale production of the PANI organic coatings, which exhibit outstanding anticorrosion competence and self-healing properties.

This paper aims to focus on the synthesis of the macrocyclic complexes (Cu and Zn) and their applications as anticorrosive materials in epoxy paint formulation for surface coating application.

A selected macrocyclic Cu(II) and Zn(II) complexes were prepared via template synthesis and characterized using Fourier transform infrared, thermal gravimetric analysis, scanning electron microscope, flexibility, hardness and adhesion of coating films prepared using epoxy paint.

The corrosion resistance of the epoxy-painted films was improved due to the incorporation of the Zn and Cu complexes into the formulation.

It was found that the metal complex-based formulation with Cu(II) and Zn(II) had outperformed the sample blank.

The purpose of this paper was to prepare a ternary hierarchical rough particle to accelerate the anti-corrosive design for coastal concrete infrastructures.

A kind of micro-nano hydrophobic ternary microparticles was fabricated from SiO₂/halloysite nanotubes (HNTs) and recycled concrete powders (RCPs), which was then mixed with sodium silicate and silane to form an inorganic slurry. The slurry was further sprayed on the concrete surface to construct a superhydrophobic coating (SHC). Transmission electron microscopy and energy-dispersive X-ray spectroscopy mappings demonstrate that the nano-sized SiO₂ has been grafted on the sub-micron HNTs and then further adhered to the surface of micro-sized RCP, forming a kind of superhydrophobic particles (SiO₂/HNTs@RCP) featured of abundant micro-nano hierarchical structures.

The SHC surface presents excellent superhydrophobicity with the water contact angle >156°. Electrochemical tests indicate that the corrosion rate of mild steel rebar in coated concrete reduces three-order magnitudes relative to the uncoated one in 3.5% NaCl solution. Water uptake and chloride ion (Cl^-) diffusion tests show that the SHC exhibits high H₂O and Cl^- ions barrier properties thanks to the pore-sealing and water-repellence properties of SiO₂/HNTs@RCP particles. Furthermore, the SHC possesses considerable mechanical durability and outstanding self-cleaning ability.

SHC inhibits water uptake, Cl^- diffusion and rebar corrosion of concrete, which will promote the sustainable application of concrete waste in anti-corrosive concrete projects.

Steam explosions are a major safety concern in many modern furnaces. The explosions are sometimes caused by water ingress into the furnace from leaks in its high-pressure (HP) cooling water system, coming into contact with molten matte. To address such safety issues related to steam explosions, risk based inspection (RBI) is suggested in this paper. RBI is presently one of the best-practice methodologies to provide an inspection schedule and ensure the mechanical integrity of pressure vessels. The application of RBIs on furnace HP cooling systems in this work is performed by incorporating the proportional hazards model (PHM) with the RBI approach; the PHM uses real-time condition data to allow dynamic decision-making on inspection and maintenance planning.

To accomplish this, a case study is presented that applies an HP cooling system data with moisture and cumulated feed rate as covariates or condition indicators to compute the probability of failure and the consequence of failure (CoF), which is modelled based on the boiling liquid-expanding vapour explosion (BLEVE) theory.

The benefit of this approach is that the risk assessment introduces real-time condition data in addition to time-based failure information to allow improved dynamic decision-making for inspection and maintenance planning of the HP cooling system. The work presented here comprises the application of the newly proposed methodology in the context of pressure vessels, considering the important challenge of possible explosion accidents due to BLEVE as the CoF calculations.

This paper however aims to optimise the inspection schedule on the HP cooling system, by incorporating PHM into the RBI methodology, as was recently proposed in the literature by Lelo et al. (2022). Moisture and cumulated feed rate are used as covariate. At the end, risk mitigation policy is suggested.

In this paper, the proposed methodology yields a dynamically calculated quantified risk, which emphasised the imperative for mitigating the risk, as well as presents a number of mitigation options, to quantifiably affect such mitigation.