Search results

Safety and productivity are key concerns in the construction projects. While safety looks to the construction workers need to work in a safe environment, productivity affects the project’s profitability and is of a paramount importance from the project owner’s view. The different perspective to the safety and productivity from these two major players in construction projects poses a potential for the conflict between the two. This problem can be fundamentally addressed by methods concurrently improving project safety and productivity. The paper aims to discuss this issue.

To this aim, a discrete event simulation (DES) based framework applicable was proposed for complex and hazardous operations. The utility of the framework was tested using a case study of an eight-story residential building in the north-east part of Tehran, Iran. The excavation and stabilization operation was identified as the most hazardous and critical operation in this case. The framework could improve safety and productivity of this operation by 38 and 4 percent, respectively.

This framework is a complement to the conventional construction project safety and productivity planning methods. Its main application is in complex and hazardous construction operations.

For the first time, a comprehensive framework for concurrently improving safety and productivity of an entire project was proposed in this research. DES was used as the main modeling tool in the framework to provide an ex-ante evaluation foundation applicable to a wide range of construction projects.

With the increasing use of small unmanned aircrafts (SUAs), many countries have enacted laws and regulations to ensure the safe use of SUAs. However, there is a lack of industry-specific regulations accounting for the unique features of construction-related SUA operations. Operating SUAs in the construction industry is attributed to specific risks and challenges, which should be regulated to maximize the utility of SUAs in construction. This study, therefore, aims to develop a multi-dimensional regulatory framework for using SUAs in the construction industry.

A combination of quantitative and qualitative methods was used to compare seven selected national/regional SUA regulations to identify the applicability of implementing the existing regulations in construction. The interview surveys were then conducted to diagnose the challenges of construction-related SUA operations and gather interviewees' suggestions on the regulatory framework for SUA uses in construction.

The research found that some challenges of construction-related SUAs operations were not addressed in the current regulations. These challenges included the complex and time-consuming SUA operation permit, lack of regulation for special SUA operations in construction, insufficient regulatory compliance monitoring and a lack of construction-related remote pilots' training. A regulatory framework was then developed based on the findings of comparative analysis and interview surveys.

This study mainly compared seven representative countries/regions' regulations, leading to a small sample size. Further research should be carried out to study the SUA regulations in other places, such as South Africa, South America or Middle East countries. Besides, this study's respondents to the interviews were primarily concentrated in Hong Kong, which may cause the interview results to differ from the construction industry in other countries/regions. A large-scale interview survey should be conducted in other places in the future to validate the current findings.

The proposed regulatory framework provides a reference for the policy-makers to formulate appropriate industry-specific SUA regulations and improve the applicability of SUA regulations in the construction industry. It sheds light upon the future of SUA regulations and the development of regulatory practice in this area.

This study is the first to propose a multi-dimensional regulatory framework for operating SUAs in construction by comprehensive policy comparisons and interviews. The regulatory framework offers a fresh insight into the unexplored research area and points out the direction for subsequent studies on SUA regulations in the construction industry.

Cross operation is a common operation method in the building construction process nowadays. Due to the crossover, each other's operations are disturbed, and risks also interact. This superimposed relationship of risks is worthy of attention. The study aims to develop a model for analyzing cross-working risks. This model can quantify the correlation of various risk factors.

The concept of cross operation and the cross types involved are clarified. The risk factors were extracted from cross-operation accidents. The association rule mining (ARM) was used to analyze the results of various cross-types accidents. With the help of visualization tools, the intensity distribution and correlation path of the relationship between each factor were obtained. A complete cross-operation risk analysis model was established.

The application of ARM method proves that there are obvious risk correlation deviations in different types of cross operations. A high-frequency risk common to all cross operations is on-site safety inspection and process supervision, but the subsequent problems are different. Cutting off the high-lift risk chain timely according to the results obtained by ARM can reduce or eliminate the danger of high-frequency risk factors.

This is the first systematic analysis of cross-work risk in the construction. The study determined the priority of risk management. The results contribute to targeted cross-work control to reduce accidents caused by cross-work.

The demand to reduce carbon emissions has become an increasingly important social factor due to the unprecedented impacts of climate change. However, most existing publications have focused on minimizing emissions during the operational phase of buildings. At the same time, there is a lack of comprehensive research conducted on carbon emissions, specifically during the construction phase. The purpose of this paper is to identify, review and classify current practices related to carbon emissions management in construction operations to gain greater insight into how to reduce and mitigate emissions and achieve more sustainable solutions.

This study reviewed the published literature on carbon emissions from construction. A total of 198 bibliographic records were extracted from the Scopus collection database and analyzed using Preferred Reporting Items for Systematic Review and Meta-Analyses (PRISMA). PRISMA is used as a basis for reporting possible trends, research methods and strategies used in published literatures. A total of 99 papers related to carbon emissions in the construction operations were further reviewed and analyzed. This review paper draws on existing research and identifies current carbon management patterns in construction projects.

Data indicated an upward trend in the number of publications in carbon emissions research during the last few years, particularly in 2015, 2017 and 2019. The most significant contributions to the domain were reported from China, Europe and the USA. This paper found that most studies conduct the Life Cycle Assessment (LCA) method to estimate carbon emissions. This paper found that the primary studies have focused on construction machinery and equipment emissions. The strategies such as establishing uniform standards for carbon emissions policies and regulations, equipment and logistic planning and low carbon design material will potentially impact carbon emissions reductions.

This paper provides information that will be beneficial for the construction industry to design and manage construction operations. It will also be of interest to those looking to reduce or manage construction emissions.

Although there is a diversity of current thinking related to the practical estimation and management of carbon emissions in construction projects, there is no consolidated set of keys of standardized carbon emissions management in practice. By assessing the existing paradigms of carbon assessment methods and tactics in the construction industry, this study contributed to the existing knowledge base by providing insights into current techniques in the construction sector for monitoring and mitigating emissions.

This paper aims to provide top-level design and basic platform for intelligent application in China high-speed railway.

Based on the analysis for the future development trends of world railway, combined with the actual development needs in China high-speed railway, The definition and scientific connotation of intelligent high-speed railway (IHSR) are given at first, and then the system architecture of IHSR are outlined, including 1 basic platform, 3 business sectors, 10 business fields, and 18 innovative applications. At last, a basic platform with cloud edge integration for IHSR is designed.

The rationality, feasibility and implementability of the system architecture of IHSR have been verified on and applied to the Beijing–Zhangjiakou high-speed railway, providing important support for the construction and operation of the world’s first IHSR.

This paper systematically gives the definition and connotation of the IHSR and put forward the system architecture of IHSR for first time. It will play the most important role in the design, construction and operation of IHSR.

The purpose of this paper is to explore the synergies between post-end-of-life of building (PEoLB) concepts and operations to achieve sustainability.

A systematic literature review (SLR) was conducted using 65 articles published between 2006 and 2017, and it has been subjected to descriptive and thematic analysis.

The descriptive analysis revealed that the majority of the articles were about (60 per cent) PEoLB operations, followed by (23 per cent) PEoLB concepts. Only 17 per cent of the articles have dealt with PEoLB-related strategic approaches. The thematic analysis elaborated on the literature development; interrelationships between PEoLB concepts and operations; impediments of introducing sustainability on these operations, remedial measures and information-based strategic approaches to achieve sustainability. Based on the findings, a conceptual framework for sustainable PEoLB operations is proposed. Furthermore, four areas of potential future research are discussed.

This study presents a future research agenda including best practices to plan PEoLB operations and the development of optimisation models, risk management and information-based strategic approaches.

The proposed conceptual research framework triggers and nurtures potential pathways to introduce sustainable PEoLB operations under sound information flow. This could create a basis for future empirical studies in filling the identified gaps in literature. The framework could also assist practitioners in mitigating risks associated with transportation, storing and contamination of salvaged materials through enhanced information flow. In addition, the framework provides some managerial guidance to organisations seeking ways of establishing sustainability during reverse logistics (RL) operations.

This paper presents an SLR of an emerging area of research that encapsulates closed-loop supply chain through sustainable RL operations. The study highlights the interrelationships between PEoLB concepts and operations. It develops a robust approach to effectively manage the PEoLB operations underpinned by a sound information flow to facilitate sustainability.

Productivity increase is correlated with profitability, sustainability and competitiveness of the construction firms. Recent studies reveal that the primary causes of productivity decline are poor usage of scientific and technological advances, ineffective supervision strategies and poor apprenticeship facilities/opportunities. Accordingly, the purpose of this study was to evaluate how well construction supervisors can utilise fundamental science and technological concepts/ideas to increase the efficiency and productivity of construction activities.

A new strategic layout was designed with the use of potential training guide tools. Based on the designed layout, a new supervisory training programme was developed, and 62 construction supervisors were selected, trained and evaluated in line with six parts of competencies and the relevant learning domains. An assessment guide with different levels of descriptions and criteria was developed through literature analysis and expert interviews. The research tools were verified using comprehensive approaches.

The overall mean values of supervisors’ performance scores indicate proficient-level grades in the competency characteristics related to taking measurements, generating drawings/designs using manual techniques and computer-aided tools, involving Bill of Quantities (BOQ) preparations and preparing training plans/materials for improving the competencies of labourers on estimation, measurements and understanding drawings. Their proficiency was notably lower in the use of information and communication technology application tools in construction tasks compared to others. The findings point to a modern generalised guideline that establishes the ranges of supervisory attributes associated with science and technology-related applications.

The study outcomes produce conceptualised projections to restructure and revalue the job functions of various working categories by adding new definitions within the specified scope. This may result in constructive benefits to upgrading the current functions associated with urbanisation, sustainability and society. The implementation of the study’s findings/conclusions will have a significant impact on present and future practices in other developing nations and developing industries, even if they are directly applicable to the Sri Lankan construction industry.

Up to certain limits/stages, the study fills not only the knowledge gap in the field of creating protocols and application techniques connected to lifelong learning and skill enhancement/upgrading but also the existing gaps in work attributes and roles of construction supervisors associated with the utilisation of fundamental science and technological concepts/ideas towards reinforcing sustainable and productive site operations.

Accurate and rapid tracking and counting of building materials are crucial in managing on-site construction processes and evaluating their progress. Such processes are typically conducted by visual inspection, making them time-consuming and error prone. This paper aims to propose a video-based deep-learning approach to the automated detection and counting of building materials.

A framework for accurately counting building materials at indoor construction sites with low light levels was developed using state-of-the-art deep learning methods. An existing object-detection model, the You Only Look Once version 4 (YOLO v4) algorithm, was adapted to achieve rapid convergence and accurate detection of materials and site operatives. Then, DenseNet was deployed to recognise these objects. Finally, a material-counting module based on morphology operations and the Hough transform was applied to automatically count stacks of building materials.

The proposed approach was tested by counting site operatives and stacks of elevated floor tiles in video footage from a real indoor construction site. The proposed YOLO v4 object-detection system provided higher average accuracy within a shorter time than the traditional YOLO v4 approach.

The proposed framework makes it feasible to separately monitor stockpiled, installed and waste materials in low-light construction environments. The improved YOLO v4 detection method is superior to the current YOLO v4 approach and advances the existing object detection algorithm. This framework can potentially reduce the time required to track construction progress and count materials, thereby increasing the efficiency of work-in-progress evaluation. It also exhibits great potential for developing a more reliable system for monitoring construction materials and activities.

The present paper reports on the development of SITE EXPERT: a prototype knowledge‐based expert system. It is an advisory system. SITE EXPERT is intended to be used for productivity improvement in construction and provides advice on: (1) the productivity of three basic operations of construction, i.e. pouring and placing of concrete, erection and removal of formwork, and fixing reinforcement; and (2) human resources and site layout as productivity factors. The system uses information from construction experts, text books, data recorded at construction sites and the engineer's own knowledge, as well as knowledge obtained by running simulation models. In the present paper, the development, operation and evaluation of the prototype system is described. The results of this prototype system development demonstrate that artificial intelligence methodologies provide powerful facilities for capturing information about construction processes and advising the practitioners of construction on productivity improvement within a computer format close to human reasoning.

The crane plays an essential role in modern construction sites as it supports numerous operations and activities on-site. Additionally, the crane produces a big amount of data that, if analyzed, could significantly affect productivity, progress monitoring and decision-making in construction projects. This paper aims to show the usability of crane data in tracking the progress of activities on-site.

This paper presents a pattern-based recognition method to detect concrete pouring activities on any concrete-based construction sites. A case study is presented to assess the methodology with a real-life example.

The analysis of the data helped build a theoretical pattern for concrete pouring activities and detect the different phases and progress of these activities. Accordingly, the data become useable to track progress and identify problems in concrete pouring activities.

The paper presents an example for construction practitioners and researcher about a practical and easy way to analyze the big data that comes from cranes and how it is used in tracking projects' progress. The current study focuses only on concrete pouring activities; future studies can include other types of activities and can utilize the data with other building methods to improve construction productivity.

The proposed approach is supposed to be simultaneously efficient in terms of concrete pouring detection as well as cost-effective. Construction practitioners could track concrete activities using an already-embedded monitoring device.

While several studies in the literature targeted the optimization of crane operations and of mitigating hazards through automation and sensing, the opportunity of using cranes as progress trackers is yet to be fully exploited.