Search results

As the strategy of 5G new infrastructure is deployed and advanced, 5G-R becomes the primary technical system for future mobile communication of China’s railway. V2V communication is also an important application scenario of 5G communication systems on high-speed railways, so time synchronization between vehicles is critical for train control systems to be real-time and safe. How to improve the time synchronization performance in V2V communication is crucial to ensure the operational safety and efficiency of high-speed railways.

This paper proposed a time synchronization method based on model predictive control (MPC) for V2V communication. Firstly, a synchronous clock for V2V communication was modeled based on the fifth generation mobile communication-railway (5G-R) system. Secondly, an observation equation was introduced according to the phase and frequency offsets between synchronous clocks of two adjacent vehicles to construct an MPC-based space model of clock states of the adjacent vehicles. Finally, the optimal clock offset was solved through multistep prediction, rolling optimization and other control methods, and time synchronization in different V2V communication scenarios based on the 5G-R system was realized through negative feedback correction.

The results of simulation tests conducted with and without a repeater, respectively, show that the proposed method can realize time synchronization of V2V communication in both scenarios. Compared with other methods, the proposed method has faster convergence speed and higher synchronization precision regardless of whether there is a repeater or not.

This paper proposed an MPC-based time synchronization method for V2V communication under 5G-R. Through the construction of MPC controllers for clocks of adjacent vehicles, time synchronization was realized for V2V communication under 5G-R by using control means such as multistep prediction, rolling optimization, and feedback correction. In view of the problems of low synchronization precision and slow convergence speed caused by packet loss with existing synchronization methods, the observer equation was introduced to estimate the clock state of the adjacent vehicles in case of packet loss, which reduces the impact of clock error caused by packet loss in the synchronization process and improves the synchronization precision of V2V communication. The research results provide some theoretical references for V2V synchronous wireless communication under 5G-R technology.

Industry 4.0 (I40) is an open window of opportunity for Turkey, a developed country, to eliminate technological dependence and produce with maximum productivity. However, I40, which corresponds to the fourth wave of industrial revolutions, brings both opportunities and challenges. In this context, this study aims to reveal the foresight of managers in the Turkish white goods industry (TWGI) regarding the advantages and challenges of I40 and compare them with the literature.

The Delphi method was used for the study. Data were collected from managers of companies that are members of the White Goods Suppliers Association (BEYSAD). Seventy managers from 55 companies participated in the first round, and 19 managers participated in the second round of Delphi.

The results show that the most frequently cited advantages are productivity/resource efficiency, data and information-enabled effectiveness/productivity, quality 4.0 and competitiveness/strategy. The most frequently mentioned challenges are financial resources/investment, employee qualification/training, technical/processual challenges and organizational transformation/leadership.

The sample was limited to the managers of the TWGI.

Players in similar ecosystems and policymakers should consider the advantages and respond to potential challenges when creating roadmaps, taking the necessary steps and positioning themselves in the marketplace. In particular, the TWGI – Turkey’s showcase in international markets – should consider the undeniable benefits of the I40 transition to increase innovation.

The findings for the first time highlight the advantages and challenges of I40 in an industry in Turkey, and they will benefit the TWGI, which is among the leaders in Turkey in terms of digital maturity and innovation in its journey to I40.

The purpose of this paper is to gain consensus regarding the clinical priorities and tasks required in supporting communication needs in those living with semantic dementia and their families, by specialist speech and language therapists (SLTs), working in clinical practice within dementia care settings in the UK.

A nominal group technique was used, followed by further exploration and refinement of issues using a modified Delphi technique with a group of six SLTs who specialised in dementia care and who had experience of working with individuals with semantic dementia and their families.

The findings in the study demonstrate a broader scope of practice than is evident within the research literature with this client group. Therapists identified a range of psychosocial issues for both the person with semantic dementia and their family, in particular finding ways to support activity and participation in conversation and explore barriers and facilitators within the communication environment.

This represents the first study to explore everyday practice in this rarer dementia and the information gathered here will be of use to a variety of health and social care professions interested in supporting those with semantic dementia and their families.

This study aims to validate the content of an instrument which identifies the organizational, sociocultural and technological characteristics that foster digital transformation (DT) in higher education institutions (HEIs) through the Delphi method.

The methodology is quantitative, non-experimental, and descriptive in scope. First, expert judges were selected; Second, Aiken's V coefficients were obtained. Nine experts were considered for the validation.

This study’s findings show that the instrument has content validity and there was strong consensus among the judges. The instrument consists of 29 questions; 13 items adjusted and 2 merged.

A novel instrument for measuring the DT at HEIs was designed and has content validity, evidenced by Aiken's V coefficients of 0.91 with a 0.05 significance, and consensus among judges evidenced by consensus coefficient of 0.81.

Terrestrial laser scanning (TLS) point clouds have been widely used in deformation measurement for structures. However, reliability and accuracy of resulting deformation estimation strongly depends on quality of each step of a workflow, which are not fully addressed. This study aims to give insight error of these steps, and results of the study would be guidelines for a practical community to either develop a new workflow or refine an existing one of deformation estimation based on TLS point clouds. Thus, the main contributions of the paper are investigating point cloud registration error affecting resulting deformation estimation, identifying an appropriate segmentation method used to extract data points of a deformed surface, investigating a methodology to determine an un-deformed or a reference surface for estimating deformation, and proposing a methodology to minimize the impact of outlier, noisy data and/or mixed pixels on deformation estimation.

In practice, the quality of data point clouds and of surface extraction strongly impacts on resulting deformation estimation based on laser scanning point clouds, which can cause an incorrect decision on the state of the structure if uncertainty is available. In an effort to have more comprehensive insight into those impacts, this study addresses four issues: data errors due to data registration from multiple scanning stations (Issue 1), methods used to extract point clouds of structure surfaces (Issue 2), selection of the reference surface S_ref to measure deformation (Issue 3), and available outlier and/or mixed pixels (Issue 4). This investigation demonstrates through estimating deformation of the bridge abutment, building and an oil storage tank.

The study shows that both random sample consensus (RANSAC) and region growing–based methods [a cell-based/voxel-based region growing (CRG/VRG)] can be extracted data points of surfaces, but RANSAC is only applicable for a primary primitive surface (e.g. a plane in this study) subjected to a small deformation (case study 2 and 3) and cannot eliminate mixed pixels. On another hand, CRG and VRG impose a suitable method applied for deformed, free-form surfaces. In addition, in practice, a reference surface of a structure is mostly not available. The use of a fitting plane based on a point cloud of a current surface would cause unrealistic and inaccurate deformation because outlier data points and data points of damaged areas affect an accuracy of the fitting plane. This study would recommend the use of a reference surface determined based on a design concept/specification. A smoothing method with a spatial interval can be effectively minimize, negative impact of outlier, noisy data and/or mixed pixels on deformation estimation.

Due to difficulty in logistics, an independent measurement cannot be established to assess the deformation accuracy based on TLS data point cloud in the case studies of this research. However, common laser scanners using the time-of-flight or phase-shift principle provide point clouds with accuracy in the order of 1–6 mm, while the point clouds of triangulation scanners have sub-millimetre accuracy.

This study aims to give insight error of these steps, and the results of the study would be guidelines for a practical community to either develop a new workflow or refine an existing one of deformation estimation based on TLS point clouds.

The results of this study would provide guidelines for a practical community to either develop a new workflow or refine an existing one of deformation estimation based on TLS point clouds. A low-cost method can be applied for deformation analysis of the structure.

Although a large amount of the studies used laser scanning to measure structure deformation in the last two decades, the methods mainly applied were to measure change between two states (or epochs) of the structure surface and focused on quantifying deformation-based TLS point clouds. Those studies proved that a laser scanner could be an alternative unit to acquire spatial information for deformation monitoring. However, there are still challenges in establishing an appropriate procedure to collect a high quality of point clouds and develop methods to interpret the point clouds to obtain reliable and accurate deformation, when uncertainty, including data quality and reference information, is available. Therefore, this study demonstrates the impact of data quality in a term of point cloud registration error, selected methods for extracting point clouds of surfaces, identifying reference information, and available outlier, noisy data and/or mixed pixels on deformation estimation.

The transaction process of an office building is known to be time consuming and inefficient, in part due to the lack of market transparency. The purpose of this paper is to focus on the development of a blockchain application that can improve the transaction process of office buildings in the Netherlands.

Conducting design science research, the current transaction process of an office building and status quo of blockchain technology in real estate is investigated. Subsequently, multiple parties are interviewed to define major pain points within the process. The interview findings are used to design a blockchain solution which overcomes the aforementioned pain points. After designing, the interviewees are asked again to pragmatically validate the proposed model.

One of the major pain points identified concerning the transaction process of an office building is that it is difficult to define the characteristics of a property, due to lack of data structure and quality. The proposed application improves the way specific assets are understood by structuring physical and contractual information in one place and guarantees the quality of the data by using the blockchain mechanisms.

A blockchain application is proposed, which can improve the transaction process of an office building.

Recent studies indicate that blockchain technology could lead to improvements in efficiency, transparency and therefore trust within the transaction process. Therefore, the proposed application is of value for the future of real estate data management and the transaction process.

Health care integration is crucial in improving service equality and patient outcomes. However, measuring integration between the health and social care sectors remains challenging. This article aims to review existing systematic models to identify alternative health and social care integration measurement tools. The review focuses on models that involve systematic planning and long-term cooperation across different organizational sectors.

The study examines various dimensions and elements of integration, including process, outcome and structural measures. It compares different tools used to measure social and health care integration, such as the Rainbow model, Balanced Scorecard (BSC) Scorecard, PRISMA, SCIROCCO, integRATE, health-data simulation (HSIM) and the model developed by Åhgren and Axelsson. The analysis includes both empirical studies and theoretical frameworks.

The findings highlight the importance of standardized measurement methods to assess the impact of integration initiatives on patient outcomes, healthcare costs and the quality of care.

The review contributes to the ongoing discourse on social and health care integration, particularly in the Nordic context. The results can inform social and healthcare providers, policymakers and researchers in evaluating and improving integration initiatives.

Blockchain technology is one of the emerging innovative technologies making waves globally, and it has been adjudged to have the capability to transform businesses. With the different capabilities of the technology, such as immutability of information and decentralisation of authority attributes, the built environment is slow in its adoption. This study aims to explore the barriers to the implementation of blockchain technology in the construction using a principal component analysis (PCA) approach.

This research took a post-positivist philosophical stance, which informed a quantitative research approach through a questionnaire survey. From the South African built environment and information technology sector, 79 respondents were drawn through a snowballing sampling technique. The built environment professionals include architect, construction project manager, construction manager, quantity surveyor and engineer. Retrieved data were screened and analysed by adopting the descriptive analysis and PCA while Cronbach alpha evaluated the reliability. Also, Kruskal–Wallis H non-parametric test was used to determine the differences in the opinion of the respondent groups.

The analysis revealed that all the identified barriers ranked above the average mean with lack of clarity, scalability risks and lack of skills or knowledge ranking top three. PCA clustered the identified barriers into three components: organisational barriers, social barriers and technological barriers.

This study was carried out in the Gauteng province of South Africa, leaving out other provinces due to accessibility, cost and time constraints.

Built environment organisations need to be kept abreast of the capabilities of blockchain technology as the major barrier observed was the lack of clarity of blockchain technology. Also, the technological barriers identified from this study need to be addressed by information technology experts to give consumers the desired value for money in implementing blockchain technology for the built environment.

The blockchain technology capabilities are incomparable to any other invention thus far. Therefore, it is very important that the numerous stakeholders in the built environment be made aware of the blockchain technology capabilities while formulating a solution to the identified barriers. This will aid its implementation in the built environment and help the industry measure up with its counterparts.