Search results

Collaborative robots – “cobots” – are intended for direct interaction with a human worker, handling a shared payload. They are a marked departure from autonomous industrial robots which must be isolated from people for safety reasons. Cobots are also distinct from teleoperators, in which a human operator controls a robot and payload remotely. Cobots interact with people by producing software‐defined “virtual surfaces” which constrain and guide the motion of the shared payload, but add little or no power. Ergonomic as well as productivity benefits result from combining the strength and computer‐interface of the cobot with the sensing and dexterity of the human worker. This paper explains cobots as one approach to an emerging class of materials handling equipment called Intelligent Assist Devices (IADs). We describe two cobots of this class presently in industrial testbed settings. Future applications of cobots’ virtual surfaces are tool guidance in image guided surgery, and haptic display in which the surfaces of a CAD model can be felt.

Industry 5.0 focuses on human–machine collaboration and sustainability with collaborative robots (CoBots) and artificial intelligence (AI) penetration via different technology-enabled devices. Such devices have gained increasing interest to facilitate more efficient, effective, and budget-friendly outcomes in major sectors, including healthcare. The healthcare sector has been evolving at an increasing speed across the globe. In this context, challenges and opportunities have arisen in terms of improving patient outcomes and improving the efficiency of healthcare practitioners’ work. Hence, the adoption of CoBots and AI-enabled devices in this sector is now crucial, and they have been implemented in several domains in healthcare, including diagnosis, medication development, and treatment. However, the successful implementation depends on the users’ attitudes toward the adoption. While extant studies have shown that such devices have significant practical advantages from the patients’ perspective, little is known about healthcare practitioners’ willingness to adopt tech-enabled devices. Thus, this study focuses on the adoption of CoBots and AI-enabled devices in the healthcare sector by examining Turkish medical doctors’ attitudes toward adopting them in their daily operations. The study supplements current literature on Industry 5.0 in healthcare, sheds light on real-life practices, and proposes future directions.

The Industry 4.0 initiative – with its ultimate objective of revolutionizing the supply-chain – putted more emphasis on smart and autonomous systems, creating new opportunities to add flexibility and agility to automatic manufacturing systems. These systems are designed to free people from monotonous and repetitive tasks, enabling them to concentrate in knowledge-based jobs. One of these repetitive functions is the order-picking task which consists of collecting parts from storage (warehouse) and distributing them among the ordering stations. An order-picking system can also pick finished parts from working stations to take them to the warehouse. The purpose of this paper is to present a simplified model of a robotic order-picking system, i.e. a mobile manipulator composed by an automated guided vehicle (AGV), a collaborative robot (cobot) and a robotic hand.

Details about its implementation are also presented. The AGV is needed to safely navigate inside the factory infrastructure, namely, between the warehouse and the working stations located in the shop-floor or elsewhere. For that purpose, an ActiveONE AGV, from Active Space Automation, was selected. The collaborative robot manipulator is used to move parts from/into the mobile platform (feeding the working stations and removing parts for the warehouse). A cobot from Kassow Robots was selected (model KR 810), kindly supplied by partner companies Roboplan (Portugal) and Kassow Robotics (Denmark). An Arduino MKR1000 board was also used to interconnect the user interface, the AGV and the collaborative robot. The graphical user interface was developed in C# using the Microsoft Visual Studio 2019 IDE, taking advantage of this experience in this type of language and programming environment.

The resulting prototype was fully demonstrated in the partner company warehouse (Active Space Automation) and constitutes a possible order-picking solution, which is ready to be integrated into advanced solutions for the factories of the future.

A solution to fully automate the order-picking task at an industrial shop-floor was presented and fully demonstrated. The objective was to design a system that could be easy to use, to adapt to different applications and that could be a basic infrastructure for advanced order-picking systems. The system proved to work very well, executing all the features required for an order-picking system working in an Industry 4.0 scenario where humans and machines must act as co-workers. Although all the system design objectives were accomplished, there are still opportunities to improve and add features to the presented solution. In terms of improvements, a different robotic hand will be used in the final setup, depending on the type of objects that are being required to move. The amount of equipment that is located on-board of the AGV can be significantly reduced, freeing space and lowering the weight that the AGV carries. For example, the controlling computer can be substituted by a single-board-computer without any advantage. Also, the cobot should be equipped with a wrist camera to identify objects and landmark. This would allow the cobot to fully identify the position and orientation of the objects to pick and drop. The wrist camera should also use bin-picking software to fully identify the shape of the objects to pick and also their relative position (if they are randomly located in a box, for example). These features are easy to add to the developed mobile manipulator, as there are a few vision systems in the market (some that integrate with the selected cobot) that can be easily integrated in the solution. Finally, this paper reports a development effort that neglected, for practical reasons, all issues related with certification, safety, training, etc. A future follow-up paper, reporting a practical use-case implementation, will properly address those practical and operational issues.

Increasing personnel costs and labour shortages have pushed retailers to give increasing attention to their intralogistics operations. We study hybrid order picking systems, in which humans and robots share work time, workspace and objectives and are in permanent contact. This necessitates a collaboration of humans and their mechanical coworkers (cobots).

Through a longitudinal case study on individual-level technology adaption, we accompanied a pilot testing of an industrial truck that automatically follows order pickers in their travel direction. Grounded on empirical field research and a unique large-scale data set comprising N = 2,086,260 storage location visits, where N = 57,239 storage location visits were performed in a hybrid setting and N = 2,029,021 in a manual setting, we applied a multilevel model to estimate the impact of this cobot settings on task performance.

We show that cobot settings can reduce the time required for picking tasks by as much as 33.57%. Furthermore, practical factors such as product weight, pick density and travel distance mitigate this effect, suggesting that cobots are especially beneficial for short-distance orders.

Given that the literature on hybrid order picking systems has primarily applied simulation approaches, the study is among the first to provide empirical evidence from a real-world setting. The results are discussed from the perspective of Industry 5.0 and can prevent managers from making investment decisions into ineffective robotic technology.

The purpose of this paper is to introduce a method for stiffness modeling, identification and updating of collaborative robots (cobots). This method operates in real-time and with high precision and can eliminate the modeling error between the actual stiffness model and the theoretical stiffness model.

To simultaneously ensure the computational efficiency and modeling accuracy of the stiffness model, this method introduces the finite element substructure method (FESM) into the virtual joint method (VJM). The stiffness model of the cobots is built by integrating several 6-degree of freedom virtual joints that represent the elastic deformation of the cobot modules, and the stiffness matrices of these modules can be identified and obtained by the FESM. A model-updating method is proposed to identify stiffness influence coefficients, which can eliminate the modeling error between the actual prototype model and the theoretical finite element model.

The average relative error and the cycle time of the proposed method are approximately 6.14% and 1.31 ms, respectively. Compared with other stiffness modeling methods, this method not only has high modeling accuracy in high dexterity poses but also in low dexterity poses.

A hybrid stiffness modeling method is introduced to integrate the modeling accuracy of the FESM into the VJM. Stiffness influence coefficients are proposed to eliminate the modeling error between the theoretical and actual stiffness models.

This paper aims to illustrate the growing role of robots in the electronics industries.

Following a short introduction, this paper discusses robotic applications and products in three sectors of the electronics industry: semiconductor processing, printed circuit manufacture and electronic product assembly. Finally, conclusions are drawn.

The major application in semiconductor manufacture is the handling of silicon wafers during both front- and back-end processes and products include cleanroom certified multi-axis robotic arms, some mounted on mobile platforms, and automated guided vehicles. Applications in printed circuit board production include component handling and insertion, soldering, inspection, testing and packing. These exploit Cartesian, SCARA and six-axis articulated robots and cobots play an important role where automated and manual processes operate in close proximity. Electronic product assembly applications include part handling, soldering, bonding and sealing, screw driving, test and inspection and packaging. Cobots offer the benefits of a small footprint which allows deployment in the often limited space and use in proximity to humans. As yet, robotic assembly of complex electronic products such as smartphones and computers has not been realised for technical reasons.

This study provides a detailed review of robotic products and applications in three key sectors of the electronics industries.

This paper aims to provide a European perspective on the collaborative robot business and to consider the factors governing future market development.

Following an introduction, this first describes the collaborative robots launched recently by European manufacturers and their applications. It then discusses major European research activities and finally considers the factors stimulating the market.

This article shows that collaborative robots are being commercialised by the major European robot manufacturers as well as by several smaller specialists. Although most have low payload capacities they are inexpensive and offer a number of operational benefits, making them well suited to a range of existing and emerging applications. Europe has a strong research base and several EU-funded programmes aim to stimulate collaborative robot development and use. Rapid market development is anticipated, driven in the main by applications in electronic product manufacture and assembly; new applications in the automotive industry; uses by small to medium-sized manufacturers; and companies seeking robots to support agile production methods.

This paper provides a timely review of the rapidly developing European collaborative robot industry.

The purpose of this paper is to present a wall-climbing robot platform for heavy-load with negative pressure adsorption, which could be equipped with a six-degree of freedom (DOF) collaborative robot (Cobot) and detection device for inspecting the overwater part of concrete bridge towers/piers for large bridges.

By analyzing the shortcomings of existing wall-climbing robots in detecting concrete structures, a wall-climbing mobile manipulator (WCMM), which could be compatible with various detection devices, is proposed for detecting the concrete towers/piers of the Hong Kong-Zhuhai-Macao Bridge. The factors affecting the load capacity are obtained by analyzing the antislip and antioverturning conditions of the wall-climbing robot platform on the wall surface. Design strategies for each part of the structure of the wall-climbing robot are provided based on the influencing factors. By deriving the equivalent adsorption force equation, analyzed the influencing factors of equivalent adsorption force and provided schemes that could enhance the load capacity of the wall-climbing robot.

The adsorption test verifies the maximum negative pressure that the fan module could provide to the adsorption chamber. The load capacity test verifies it is feasible to achieve the expected bearing requirements of the wall-climbing robot. The motion tests prove that the developed climbing robot vehicle could move freely on the surface of the concrete structure after being equipped with a six-DOF Cobot.

The development of the heavy-load wall-climbing robot enables the Cobot to be installed and equipped on the wall-climbing robot, forming the WCMM, making them compatible with carrying various devices and expanding the application of the wall-climbing robot.

A heavy-load wall-climbing robot using negative pressure adsorption has been developed. The wall-climbing robot platform could carry a six-DOF Cobot, making it compatible with various detection devices for the inspection of concrete structures of large bridges. The WCMM could be expanded to detect the concretes with similar structures. The research and development process of the heavy-load wall-climbing robot could inspire the design of other negative-pressure wall-climbing robots.

Although disassembly balancing lines has been studied for over two decades, there is a gap in the robotic disassembly. Moreover, combination of problem with heterogeneous employee assignment is also lacking. The hazard related with the tasks performed on disassembly lines on workers can be reduced by the use of robots or collaborative robots (cobots) instead of workers. This situation causes an increase in costs. The purpose of the study is to propose a novel version of the problem and to solve this bi-objective (minimizing cost and minimizing hazard simultaneously) problem.

The epsilon constraint method was used to solve the bi-objective model. Entropy-based Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) and Preference Ranking Organization methods for Enrichment Evaluation (PROMETHEE) methods were used to support the decision-maker. In addition, a new criterion called automation rate was proposed. The effects of factors were investigated with full factor experiment design.

The effects of all factors were found statistically significant on the solution time. The combined effect of the number of tasks and number of workers was also found to be statistically significant.

In this study, for the first time in the literature, a disassembly line balancing and employee assignment model was proposed in the presence of heterogeneous workers, robots and cobots to simultaneously minimize the hazard to the worker and cost.