Search results

This study aims to solve the problem that both the speed and the required driving power of electric vehicles (EVs) will change during the dynamic wireless charging (DWC) process, making it difficult to charge EVs with a constant power considering the overall efficiency of DWC system, the numbers of EVs and the power supply capacity. Therefore, this paper proposes the power control and efficiency optimization strategies for multiple EVs.

The wireless power charging system for multiple loads with a structure of double-sided LCC compensation topology is established. The expressions of optimal transmission efficiency and optimal equivalent impedance are derived. Taking the Tesla Model 3 as an example, a method to determine the number of EVs allowed by one transmitter coil and the overall charging power is proposed considering EV speed, power supply capacity, safe braking distance and overall efficiency. Then, the power control strategy, which can adapt to the changes of EV speed and the efficiency optimization strategy under different numbers of EVs are proposed.

In this paper, a method to determine the numbers of EVs allowed by one transmitter coil and the overall charging power is proposed considering EVs speed, power supply capacity, safe braking distance and overall efficiency. The accuracy of the charging power is good enough and the overall efficiency reaches a maximum of 91.79% when the load resistance changes from 5Ω to 20Ω.

In this paper, the power control and efficiency optimization strategy of DWC system for multiple EVs are proposed. Specifically, a method of designing the number of EVs and charging power allowed by one transmitter coil considering the factors of EV speed, power supply capacity, safe braking distance and overall efficiency is designed. The overall efficiency of the experiment reaches a maximum of 91.79% after adopting the optimization strategy.

To prevent the coil from burning or getting damaged, it is necessary to estimate the duration of its operation as long as its temperature does not exceed the permissible limit. This paper aims to investigate the effect of switching on the thermal behavior of impregnated and nonimpregnated windings. Also, the safe operating time for each winding is determined.

The power loss of the winding is expressed as a function of the winding specifications. Using homogenization techniques, the equivalent thermal properties for the homogenized winding are calculated and used in a proposed thermal equivalent circuit for winding modeling and analysis. The validity and accuracy of the proposed model are determined by comparing its analysis results and simulation and measurement results.

The results show that copper windings have better thermal behavior and lower temperature compared to aluminum windings. On the other hand, by impregnating or increasing the packing factor of the winding, the thermal behavior is improved. Also, by choosing the right duty cycle for the winding current source, it is possible to prevent the burning or damage of the winding and increase its lifespan. Comparing the measurement results with the analysis results shows that the proposed equivalent circuit has an error of less than 4% in the calculation of the winding center temperature.

In this paper, the effect of temperature on the electrical resistance of the coil is ignored. Also, rectangular wires were not investigated. Research in these topics are considered as future work.

By calculating the thermal time constant of the winding, its safe operation time can be calculated so that its temperature does not exceed the tolerable value (150 °C). The proposed method analyzes both impregnated and nonimpregnated windings with various schemes. It investigates the effects of switching on their thermal behavior. Additionally, it determines the safe operating time for each type of winding.

Dielectric barrier discharge (DBD) is widely used in the treatment of skin disease, surface modification of material and other fields of electronics. The purpose of this paper is to design a high-performance power supply with a compact structure for excimer lamps in electronics application.

To design a high-performance power supply with a compact structure remains a challenge for excimer lamps in electronics application, a current-source type power supply in a single stage with power factor correction (PFC) is proposed. It consists of an excitation voltage generation unit and a PFC unit. By planning the modes of the excitation voltage generation unit, a bipolar pulse excitation voltage with a high rising and falling rate is generated. And a high power factor (PF) on the AC side is achieved by the interaction of a non-controlled rectifier and two inductors.

The experimental results show that not only a high-frequency and high-voltage bipolar pulse excitation voltage with a high average rising and falling rate (7.51GV/s) is generated, but also a high PF (0.992) and a low total harmonic distortion (5.54%) is obtained. Besides, the soft-switching of all power switches is realized. Compared with the sinusoidal excitation power supply and the current-source power supply, the proposed power supply in this paper can take advantage of the potential of excimer lamps.

A new high-performance power supply with a compact structure for DBD type excimer lamps is proposed. The proposed power supply can work stably in a wide range of frequencies, and the smooth regulation of the discharge power of the excimer lamp can be achieved by changing the switching frequency. The ideal excitation can be generated, and the soft switching can be realized. These features make this power supply a key player in the outstanding performance of the DBD excimer lamps application.

The purpose of this paper is to investigate the impact of mechanical vibration on the heat transfer and pressure drop characteristics of semicircular channel printed circuit heat exchangers (PCHEs), while also establishing correlations between vibration parameters and thermal performance.

By combining experimental and numerical simulation methods, the heat transfer coefficient and pressure drop characteristics of supercritical carbon dioxide (S-CO₂) in a semicircular channel with a diameter of 2 mm under vibration conditions were studied. Reinforce the research by conducting computational fluid dynamics studies using ANSYS Fluent 22.0, the experimental results were compared with the numerical simulation results to verify the accuracy of the numerical method.

The use of vibration has the potential to attenuate the degradation of wall heat transfer caused by buoyancy-induced PCHEs on the upward-facing surface. The heat transfer enhancement (HTE) was maximized by an increase of 18.2%, while the pressure drop enhancement (PDE) was elevated by over 25-fold. The capacity to enhance the heat exchange between S-CO₂ and channel walls through increasing vibration intensity is limited, indicating maximum effectiveness in improving thermal performance.

Conducting heat transfer experiments on PCHEs with mechanical vibration enhancement and verifying the accuracy of the vibration numerical model. The relation based on the dimensionless factor is derived. To provide theoretical support for using vibration to enhance the heat transfer capability of PCHEs.

As a commonly engine coolant, ethylene glycol can produce corrosive acid byproducts at high temperatures when the car is running, specifically oxalic acid (OA), which can shorten the service life of engine. At the same time, chloride ions can also be introduced during coolant preparation processes. Therefore, this paper aims to investigate the synergistic corrosion behavior of Cl⁻ and OA on ADC12 aluminum alloy.

The electrochemical tests, scanning electron microscopy, energy dispersive spectrometer, X-ray diffraction and X-ray photoelectron spectroscopy) were used.

The results showed that the corrosion rate of the aluminum alloy increased with the increase of OA and Cl⁻ concentrations. After adding Cl⁻, the surface film of the aluminum alloy was further damaged, Cl⁻ has a synergistic effect with OA and their interaction further accelerated the corrosion of the aluminum alloy. Nevertheless, as the immersion time increased, the corrosion rate of the aluminum alloy gradually diminished due to the formation of aluminum oxalate.

The corrosion of ADC12 aluminum alloy was studied in OA, Cl⁻ and their mixed solutions; the synergistic effect of OA and Cl⁻ on the corrosion of ADC12 aluminum alloy was discussed, and aluminum oxalate formed inhibited its corrosion.

Organic coatings are widely used for protecting metal equipment and structures from corrosion. Accurate detection and evaluation of the protective performance and service life of coatings are of great importance. This paper aims to review the research progress on performance evaluation and lifetime prediction of organic coatings.

First, the failure forms and aging testing methods of organic coatings are briefly introduced. Then, the technical status and the progress in the detection and evaluation of coating protective performance and the prediction of service life are mainly reviewed.

There are some key challenges and difficulties in this field, which are described in the end.

The progress is summarized from a variety of technical perspectives. Performance evaluation and lifetime prediction include both single-parameter and multi-parameter methods.

This paper aims to conduct a detailed analysis of the industrial practices currently being used in the geothermal energy industry and to determine whether they are contributing to any limitations. A HAZOP-based upgradation model for improvement in existing industrial practices is proposed to ensure the removal of inefficient conventional practices. The HAZOP-based upgradation model examines the setbacks, identifies its causes and consequences and suggests improvement methods comprising of modern-day technology.

This paper proposed a HAZOP-based upgradation model for improvement in existing industrial practices. The proposed HAZOP model identifies the drawbacks brought on by conventional practices and suggests improvements.

The study reviewed the challenges geothermal power plants currently face due to conventional practices and suggested a total of 22 upgradation recommendations. From those, a total of 11 upgradation modules comprising modern digital technology and Industry 4.0 elements were proposed to improve the existing practices in the geothermal energy industry. Autonomous robots, augmented reality, machine learning and Internet of Things were identified as useful methods for the upgradation of the existing geothermal energy system.

If proposed recommendations are incorporated, the efficiency of geothermal energy generation will increase as cumulating setbacks will no longer degrade the work output.

The proposed recommendation by the study will make way for Industry 4.0 integration with the geothermal energy sector.

The paper uses a proposed HAZOP-based upgradation model to review issues in existing industrial practices of the geothermal energy sector and recommends solutions to overcome operability issues using Industry 4.0 technologies.

Estimation of solar cell parameters, mathematical modeling and the actual performance analysis of photovoltaic (PV) cells at various ecological conditions are very important in the design and analysis of maximum power point trackers and power converters. This study aims to propose the analysis and modeling of a simplified three-diode model based on the manufacturer’s performance data.

A novel technique is presented to evaluate the PV cell constraints and simplify the existing equation using analytical and iterative methods. To examine the current equation, this study focuses on three crucial operational points: open circuit, short circuit and maximum operating points. The number of parameters needed to estimate these built-in models is decreased from nine to five by an effective iteration method, considerably reducing computational requirements.

The proposed model, in contrast to the previous complex nine-parameter three-diode model, simplifies the modeling and analysis process by requiring only five parameters. To ensure the reliability and accuracy of this proposed model, its results were carefully compared with datasheet values under standard test conditions (STC). This model was implemented using MATLAB/Simulink and validated using a polycrystalline solar cell under STC conditions.

The proposed three-diode model clearly outperforms the earlier existing two-diode model in terms of accuracy and performance, especially in lower irradiance settings, according to the results and comparison analysis.

This paper aims at the analytical formulation of the electromagnetic features of flux switching permanent magnet (PM) machines with emphasis on the PM air gap flux density and armature magnetic reaction.

The PM air gap flux density is formulated considering three different analytical models. These differ by the incorporation of the air gap magnetic saliency level from the stator side. In addition, the armature magnetic reaction is investigated based on a simplified magnetic reluctance circuit that considers the flux switching permanent magnet machines magnetic circuit geometry specification. Then, the no- and on-load torque is predicted based on the two air gap flux densities.

It has been found that the PM air gap flux density considering the stator saliencies with trapezoidal magnetomotive force waveform presents the highest accuracy. Despite the simplicity of the magnetic equivalent circuit-based approach, the predicted air gap armature magnetic reaction is in good agreement with the finite element analysis (FEA) one. These lead to the analytical predictions of the no- and on-load torque which is characterized by an acceptable accuracy.

This work should be extended to experimental validation of the FEA results regarding the torque production generation.

The paper proposes an improved design-oriented analytical approach with emphasis on the PM air gap flux density and the armature magnetic reaction of flux switching PM machines.

The purpose of this paper is to introduce an aid for teaching transverse flux permanent magnet machines (TFPMs) with emphasis on their torque production.

The Lorentz force law is applied to fictitious current loops emulating the permanent magnets (PMs) mounted on the rotor according to different arrangements; the air gap flux density is created by the armature current.

Implemented in a master lecture on special AC machines, the proposed approach has revealed a renewed interest in electromagnetic fundamentals for pedagogical purposes. It makes simple the explanation of the principle of operation of a class of AC machines reputed by the complexity of their magnetic circuits. The latter incorporates axially stacked decoupled sub-circuits, one per phase generating alternating magnetic fields. More specifically, there is common air gap, shared by the machine phases, in which a rotating magnetic field is created by the superposition of the PM contribution and the armature one.

Accounting for the complexity of the magnetic circuits and the three-dimensional (3D) flux paths characterizing TFPMs, a 3D finite element analysis (FEA) is required for the validation of the analytical predictions. Nevertheless, such a 3D FEA validation is far from being obvious to be carried on within a master lecture.

While the basis of Lorentz forces resulting from fictitious current loops emulating PMs has been considered in some referenced papers, its simple and pedagogical application to assess the torque production of several TFPM concepts represents the added value of the present paper.