Search results

This paper aims to present experimental work examining the effect of opening size on the collection efficiency of cavity-type receiver geometries, e.g. modified cavity and spherical cavity with single- as well as dual-stage water heating. The correlations, obtained using the experimentally obtained data, are helpful in designing of cavity receivers (modified and spherical geometry type) to be used in solar-power harnessing assignments/projects, for yielding better system performance.

The parameters of study encompass receiver opening or aperture ratios (d/D, ratio of diameter of opening to the maximum diameter of spherical cavity) of 0.4, 0.47, 0.533 and 0.6; flow Reynolds numbers of 938, 1,175, 1,525 and 1,880 with water as a coolant; and receiver inclination angles of 90, 60, 45 and 30° (with 90° as receiver-opening facing downward and 30° as receiver-aperture facing closer to sideway). A modified cavity receiver was examined for opening ratios of 0.46, 0.6, 0.7 and 0.93. The glass covers, with thickness 2, 4 and 6 mm, were positioned at the opening of cavity to mitigate the energy losses.

The experiments have been conducted at a lesser incoming radiative heat flux, for receiver cavity wall surface temperatures ranging from 90°C to 180°C. The collection efficiency values of both the receivers, modified cavity and spherical cavity types, are seen increasing with coolant flow rate and receiver tilt (inclination) angles, i.e. 30° → 90°. The collection efficiency exhibits maxima at an opening ratio of 0.533 in case of both single- and double-stage spherical cavity receiver. This value was observed as 0.6 for modified cavity receiver. The mathematical correlations developed for obtaining the collection efficiency values of modified cavity-type receiver, spherical cavity receiver with single stage and spherical cavity receiver with dual-stage water heating are given as ɳ=0.4667 Re0.0798dD0.1651 δ0.0281θ̇−0.011, ɳ=0.2317 Re0.124 dD1.265δ0.0192θ̇0.2914 and ɳ=0.1137 Re0.1715dD0.8702θ̇0.2757, respectively.

The findings of the paper may be helpful in erecting concentrating solar collector systems for household water heating, concentrating solar-based power generation as well as for various agricultural applications.

The experimental investigations are fewer in the literature examining the combined geometrical influence on the efficiency of cavity receivers with single- and double-stage water heating provisions.

This paper aims to present the numerical models and experimental outcomes pertain to the performance of the parabolic dish concentrator system with a modified cavity-type receiver (hemispherical-shaped).

The numerical models were evolved based on two types of boundary conditions; isothermal receiver surface and non-isothermal receiver surface. For validation of the numerical models with experimental results, three statistical terms were used: mean of absolute deviation, R² and root mean square error.

The thermal efficiency of the receiver values obtained using the numerical model with a non-isothermal receiver surface found agreeing well with experimental results. The numerical model with non-isothermal surface boundary condition exhibited more accurate results as compared to that with isothermal surface boundary condition. The receiver heat loss analysis based on the experimental outcomes is also carried out to estimate the contributions of various modes of heat transfer. The losses by radiation, convection and conduction contribute about 27.47%, 70.89% and 1.83%, in the total receiver loss, respectively.

An empirical correlation based on experimental data is also presented to anticipate the effect of studied parameters on the receiver collection efficiency. The anticipations may help to adopt the technology for practical use.

The developed models would help to design and anticipating the performance of the dish concentrator system with a modified cavity receiver that may be used for applications e.g. power generation, water heating, air-conditioning, solar cooking, solar drying, energy storage, etc.

The originality of this manuscript comprising presenting a differential-mathematical analysis/modeling of hemispherical shaped modified cavity receiver with non-uniform surface temperature boundary condition. It can estimate the variation of temperature of heat transfer fluid (water) along with the receiver height, by taking into account the receiver cavity losses by means of radiation and convection modes. The model also considers the radiative heat exchange among the internal ring-surface elements of the cavity.

This paper aims to deal with characterisation of the thermal performance of a hybrid tubular and cavity solar thermal receiver.

The coupled optical-flow-thermal analysis is carried out on the proposed receiver design. Modelling is performed in two and three dimensions for estimating heat loss by natural convection for an upward-facing cavity. Heat loss obtained in two dimensions by solving coupled continuity, momentum and energy equation inside the cavity domain is compared with the loss obtained using an established Nusselt number correlation for realistic receiver performance prediction.

It is found that radiation emission from a heated cavity wall to the ambient is the dominant mode of heat loss from the receiver. The findings recommend that fluid flow path must be designed adjacent to the surface exposed to irradiation of concentrated flux to limit conduction heat loss.

On-sun experimental tests need to be performed to validate the numerical study.

Numerical analysis of receivers provides guidelines for effective and efficient solar thermal receiver design.

Pressurised air receivers designed from this method can be integrated with Brayton cycles using air or supercritical carbon-dioxide to run a turbine generating electricity using a solar heat source.

The present paper proposes a novel method for coupling the flux map from ray-tracing analysis and using it as a heat flux boundary condition for performing coupled flow and heat transfer analysis. This is achieved using affine transformation implemented using extrusion coupling tool from COMSOL Multiphysics software package. Cavity surface natural convection heat transfer coefficient is obtained locally based on the surface temperature distribution.

The purpose of this paper is to present the numerical solutions of surface radiation and combined natural convection heat transfer in a solar cavity receiver. The paper aims to discuss sundry issues that take place in the said model.

The numerical solutions are developed by means of second-order upwind scheme using the SIMPLE algorithm.

The effects of physical factors such as Rayleigh number (10⁴ ≤ Ra ≤ 10⁶), inclination angels of insulated walls (0º ≤ θ ≤ 10º) and the wall surface emissivity (0 ≤ ε ≤ 1) on natural convection-surface radiation heat transfer rate are analyzed. Impact of sundry parameters on flow quantities are discussed and displayed via graphs and tables. Stream lines and isothermal lines have also been drawn in the region of cavity. The numerical results reveal that increasing the Rayleigh number, wall surface emissivity and inclination angels of insulated walls in an open cavity enhances the mean total Nusselt number. The variations of the surface radiation and natural convection heat transfer mean Nusselt numbers are very small to the inclination angle of θ, while a significant change is noted for the case of Rayleigh number and emissivity.

To the best of authors’ knowledge, this model is reported for the first time.

The utilisation of renewable energy sources for generating electricity and potable water is one of the most sustainable approaches in the current scenario. Therefore, the current research aims to design and develop a novel co-generation system to address the electricity and potable water needs of rural areas.

The cogeneration system mainly consists of a solar parabolic dish concentrator (SPDC) system with a concentrated photo-voltaic module at the receiver for electricity generation. It is further integrated with a low-temperature thermal desalination (LTTD) system for generating potable water. Also, a novel corn cob filtration system is introduced for the pre-treatment to reduce the salt content in seawater before circulating it into the receiver of the SPDC system. The designed novel co-generation system has been numerically and experimentally tested to analyse the performance at Karaikal, U.T. of Puducherry, India.

Because of the pre-treatment with a corn cob, the scale formation in the pipes of the SPDC system is significantly reduced, which enhances the efficiency of the system. It is observed that the conductivity, pH and TDS of seawater are reduced significantly after the pre-treatment by the corncob filtration system. Also, the integrated system is capable of generating 6–8 litres of potable water per day.

The integration of the corncob filtration system reduced the scaling formation compared to the general circulation of water in the hoses. Also, the integrated SPDC and LTTD systems are comparatively economical to generate higher yields of clean water than solar stills.

Aircraft noise is dominant for residents near airports when planes fly at low altitudes such as during departure and landing. Flaps, wings, landing gear contribute significantly to the total sound emission. This paper aims to present a passive flow control (in the sense that there is no power input) to reduce the noise radiation induced by the flow over the cavity of the landing gear during take-off and landing.

The understanding of the noise source mechanism is normally caused by the unsteady interactions between the cavity surface and the turbulent flows as well as some studies that have shown tonal noise because of cavity resonances; this tonal noise is dependent on cavity geometry and incoming flow that lead us to use of a sinusoidal surface modification application upstream of a cavity as a passive acoustics control device in approach conditions.

It is demonstrated that the proposed surface waviness showed a potential reduction in cavity resonance and in the overall sound pressure level at the majority of the points investigated in the low Mach number. Furthermore, optimum sinusoidal amplitude and frequency were determined by the means of a two-dimensional computational fluid dynamics analysis for a cavity with a length to depth ratio of four.

The noise control by surface waviness has not implemented in real flight test yet, as all the tests are conducted in the credible numerical simulation.

The application of passive control method on the cavity requires a global aerodynamic study of the air frame is a matter of ongoing debate between aerodynamicists and acousticians. The latter is aimed at the reduction of the noise, whereas the former fears a corruption of flow conditions. To balance aerodynamic performance and acoustics, the use of the surface waviness in cavity leading edge is the most optimal solution.

The proposed leading-edge modification it has important theoretical basis and reference value for engineering application it can meet the demands of engineering practice. Particularly, to contribute to the reduce the aircraft noise adopted by the “European Visions 2020”.

The investigate cavity noise with and without surface waviness generation and propagation by using a hybrid approach, the computation of flow based on the large-eddy simulation method, is decoupled from the computation of sound, which can be performed during a post-processing based on Curle’s acoustic analogy as implemented in OpenFOAM.

In recent times, there has been a growing interest in buoyancy-induced heat transfer within confined enclosures due to its frequent occurrence in heat transfer processes across diverse engineering disciplines, including electronic cooling, solar technologies, nuclear reactor systems, heat exchangers and energy storage systems. Moreover, the reduction of entropy generation holds significant importance in engineering applications, as it contributes to enhancing thermal system performance. This study, a numerical investigation, aims to analyze entropy generation and natural convection flow in an inclined square enclosure filled with Ag–MgO/water and Ag–TiO2/water hybrid nanofluids under the influence of a magnetic field. The enclosure features heated slits along its bottom and left walls. Following the Boussinesq approximation, the convective flow arises from a horizontal temperature difference between the partially heated walls and the cold right wall.

The governing equations for laminar unsteady natural convection flow in a Newtonian, incompressible mixture is solved using a Marker-and-Cell-based finite difference method within a customized MATLAB code. The hybrid nanofluid’s effective thermal conductivity and viscosity are determined using spherical nanoparticle correlations.

The numerical investigations cover various parameters, including nanoparticle volume concentration, Hartmann number, Rayleigh number, heat source/sink effects and inclination angle. As the Hartmann and Rayleigh numbers increase, there is a significant enhancement in entropy generation. The average Nusselt number experiences a substantial increase at extremely high values of the Rayleigh number and inclination.

This numerical investigation explores advanced applications involving various combinations of influential parameters, different nanoparticles, enclosure inclinations and improved designs. The goal is to control fluid flow and enhance heat transfer rates to meet the demands of the Fourth Industrial Revolution.

In a 90° tilted enclosure, the addition of 5% hybrid nanoparticles to the base fluid resulted in a 17.139% increase in the heat transfer rate for Ag–MgO nanoparticles and a 16.4185% increase for Ag–TiO2 nanoparticles compared to the base fluid. It is observed that a 5% nanoparticle volume fraction results in an increased heat transfer rate, influenced by variations in both the Darcy and Rayleigh numbers. The study demonstrates that the Ag–MgO hybrid nanofluid exhibits superior heat transfer and fluid transport performance compared to the Ag–TiO2 hybrid nanofluid. The simulations pertain to the use of hybrid magnetic nanofluids in fuel cells, solar cavity receivers and the processing of electromagnetic nanomaterials in enclosed environments.

The purpose of this paper is to carry out a comprehensive review of some latest studies devoted to natural convection phenomenon in the enclosures because of its significant industrial applications.

Geometries of the enclosures have considerable influences on the heat transfer which will be important in energy consumption. The most useful geometries in engineering fields are treated in this literature, and their effects on the fluid flow and heat transfer are presented.

A great variety of geometries included with different physical and thermal boundary conditions, heat sources and fluid/nanofluid media are analyzed. Moreover, the results of different types of methods including experimental, analytical and numerical are obtained. Different natures of natural convection phenomenon including laminar, steady-state and transient, turbulent are covered. Overall, the present review enhances the insight of researchers into choosing the best geometry for thermal process.

A comprehensive review on the most practical geometries in the industrial application is performed.

This study aims to employ a modern numerical approach for conducting the simulations, which uses the smoothed-profile lattice Boltzmann method. Two separate distribution functions for flow and temperature fields are used to solve the Navier–Stokes equations in the most efficient manner. In addition, the Koo–Kleinstreuer–Li model is used to calculate the dynamic viscosity and thermal conductivity in the desired volume fractions, and the effect of Brownian motion is taken into consideration.

Nowadays, because of enhanced global price of oil and critical issue of global warming, a significant demand for using renewable energy exists. The solar energy is one of the most popular forms of renewable energy. The solar collector can be used to collect and trap the energy received from the sun. The present work focuses on introducing and investigating a parabolic-trough solar collector.

To analyze all hydrodynamic and thermal views of the solar collector, the structure of nanofluid stream, distribution of temperature, local dissipations because of flow and heat transfer, volumetric entropy production, Bejan number vs Rayleigh number and volume fraction are presented. Also, three different configurations for profile of solar receiver are designed and studied.

The originality of the present work is in using a modern numerical approach for a well-known application. Also, the effect of Brownian motion is taken into account which significantly enhances the accuracy.

This study aims to investigate magnetohydrodynamic (MHD) conjugate pure mixed convection considering interior heat production and resistive heating inside a square closed/open cavity featuring a rotating cylinder for aiding (clockwise) and opposing (counterclockwise) flow configurations. Moreover, the impacts of altering cylinder size and conductivity on the system’s overall performance to determine optimum conditions are examined in this investigation.

The closed chamber is differentially heated by keeping high and low temperatures at the vertical boundaries. In contrast, the open cavity has a heated left wall and an open right boundary. The Galerkin finite element method is used to solve the Navier–Stokes and the thermal energy equations, which construct the present study’s mathematical framework. Numerical simulations are conducted for the specified ranges of several controlling parameters: Reynolds (31.62 ≤ Re ≤ 1000), Grashof (10³ ≤ Gr ≤ 10⁶) and Hartmann numbers (0 ≤ Ha ≤ 31.62), and volumetric heat generation coefficient (Δ = 0, 3).

When Gr, Re and Ha simultaneously increase, the average Nusselt number along the warmed boundary rises accordingly. Conversely, interior heat production lowers heat transmission within the computational domain, which is also monitored regarding mean fluid temperature, overall entropy production and thermal performance criterion. Finally, the open cavity confirms better thermal performance than the closed cavity.

Comprehending the impacts of the magnetic field, Joule heating, internal heat generation and enclosed or open boundary on pure MHD combined free-forced convective flow offers valuable understandings of temperature fluctuations, velocity propagations, heat transport and irretrievable energy loss in numerous engineering applications.