Search results

In light of Bangladesh’s economy, the goal of this study is to examine the “Twin Deficit Hypothesis (TDH),” which refers to a link between the budget deficit and the current account deficit. This study used yearly time series data from 1980 to 2020 to investigate the phenomena.

A multivariate autoregressive distributive lag (ARDL) model has been presented for empirical investigation, with the ARDL bound test investigating the co-integration between the inadequacies. As some of the variables in the bound test lack co-integration, the study adds a multivariate vector autoregressive (VAR) model later on.

With evidence of the result, the study supports the validation of twin deficit hypothesis in Bangladesh economy since both current account deficit and fiscal deficit affects each other significantly whereas Granger causality test confirms that fiscal deficit causes current account deficit but not the other way around.

The government should maintain a restrictive monetary policy in order to stabilize the current account deficit.

The novelty of this study is the incorporation of inflation, real exchange rate and GDP per capital to TDH that together form the basis for a macroeconomic snapshot of the economy.

This study aims to develop a novel thermal modeling strategy to simulate electron beam powder bed fusion at part scale with machine-varying process parameters strategy. Single-bead and part-scale experiments and modeling were studied. Scanning strategies were described by the process controlling functions that enabled modeling.

The finite element analysis thermal model was used along with the powder bed fusion with electron beam experiments. The proposed strategy involves dividing a part into smaller sections and creating meso-scale models for each subsection. These meso-scale models take into consideration the variable process parameters, including power and velocity of the moving heat source, during part building. Subsequently, these models are integrated to perform partscale simulations, enabling more realistic predictions of thermal accumulation and resulting distortions. The model was built and validated with single-bead experiments and bulky parts with different features.

Single-bead experiments demonstrated an average error rate of 6%–24% for melt pool dimension prediction using the proposed meso-scale models with different scanning control functions. Part-scale simulations for three different geometries (cantilever beams with supports, bulk artifact and topology-optimized transfer arm) showed good agreement between modeled temperature changes and experimental deformation values.

This study presents a novel approach for electron beam powder bed fusion modeling that leverages meso-scale models to capture the influence of variable process parameters on part quality. This strategy offers improved accuracy for predicting part geometry and identifying potential defects, leading to a more efficient additive manufacturing process.

The purpose of this paper is to solve the diverse and complex problems of flat-knitting sports upper process design, improve the design ability of upper organization, and realize three-dimensional simulation function.

Firstly, the matrix is used to establish the corresponding pattern diagram and organizational diagram model, and the relationship between the two is established by color coding as a bridge to completed the transformation of the flat-knitted sports upper process design model. Secondly, the spatial coordinates of the loop type value points are obtained through the establishment of loop mesh model, the index of two-dimensional and three-dimensional models of uppers and the establishment of spatial transformation relationship. Finally, using Visual Studio as a development tool, use the C# language to implement this series of processes.

Digitizing the fabric into a matrix model, combined with matrix transformation, can quickly realize the design of the flat-knitting process. Taking the knitting diagram of the upper process as the starting point, the loop geometry model corresponding to the element information is established, and the three-dimensional simulation effect of the flat-knitted upper based on the loop structure is realized under the premise of ensuring that it can be knitted.

This paper proposes a design and modeling method for flat-knitted uppers. Taking the upper design process and 3D simulation effect as an example, the feasibility of the method is verified, which improves the efficiency of the development of the flat-knitted upper product and lays the foundation for the high-end customization of the flat-knitted upper.

The purpose of this study is to develop a new numerical algorithm to simulate the phase-field model.

First, the derivative of the temporal direction is discretized by a second-order linearized finite difference scheme where it conserves the energy stability of the mathematical model. Then, the isogeometric collocation (IGC) method is used to approximate the derivative of spacial direction. The IGC procedure can be applied on irregular physical domains. The IGC method is constructed based upon the nonuniform rational B-splines (NURBS). Each curve and surface can be approximated by the NURBS. Also, a map will be defined to project the physical domain to a simple computational domain. In this procedure, the partial derivatives will be transformed to the new domain by the Jacobian and Hessian matrices. According to the mentioned procedure, the first- and second-order differential matrices are built. Furthermore, the pseudo-spectral algorithm is used to derive the first- and second-order nodal differential matrices. In the end, the Greville Abscissae points are used to the collocation method.

In the numerical experiments, the efficiency and accuracy of the proposed method are assessed through two examples, demonstrating its performance on both rectangular and nonrectangular domains.

This research work introduces the IGC method as a simulation technique for the phase-field crystal model.

Three-dimensional (3D) casting means using additive manufacturing (AM) techniques to print the mould for casting the cast tool. The printed mould, however, should be checked for its dimensional accuracy. 3D scanning can be used for the same. The purpose of this study is to combine the different AM techniques for 3D casting with 3D scanning to produce parts with close tolerance for preparing electrical discharge machining (EDM) electrodes.

The four processes, namely, stereolithography, selective laser sintering, fused deposition modelling and vacuum casting, are used to print the casting mould. The mould is designed in two halves, assembled to form a complete mould. The mould is 3D scanned in two stages: before and after using it as a casting mould. The mould's average and maximum dimensional deviations are calculated using 3D-scanned results. The eutectic Sn-Bi alloy is cast in the mould. The surface roughness of the mould and the cast tool are measured.

The cast tool is selected from the four processes in terms of dimensional accuracy and surface finish. The same is electroplated with copper. The microstructure of the cast tool (low-melting-point alloy) and deposited copper is analysed using a scanning electron microscope. Energy dispersive spectroscopy and X-ray diffraction techniques are used to verify the composition of the cast and coated alloy. The electroplated tool is finally tested on the EDM setup. The material removal rate and tool wear are measured. The performance is compared with a solid copper tool. The free-form customised EDM mould is also prepared, and the profile is cast out. The same is tested on the EDM. Thus, the developed path can be successfully used for rapid tooling applications.

The eutectic composition of Sn-Bi is cast in the 3D-printed mould using different AM techniques combined with 3D scanning quality to check its feasibility as an EDM electrode, which is a novel work and has not been done previously.

As laser scanning technology becomes readily available and affordable, there is an increasing demand of using point cloud data collected from a laser scanner to create as-built building information modeling (BIM) models for quality assessment, schedule control and energy performance within construction projects. To enhance the as-built modeling efficiency, this study explores an integrated system, called Auto-Scan-To-BIM (ASTB), with an aim to automatically generate a complete Industry Foundation Classes (IFC) model consisted of the 3D building elements for the given building based on its point cloud without requiring additional modeling tools.

ASTB has been developed with three function modules. Taking the scanned point data as input, Module 1 is built on the basis of the widely used region segmentation methodology and expanded with enhanced plane boundary line detection methods and corner recalibration algorithms. Then, Module 2 is developed with a domain knowledge-based heuristic method to analyze the features of the recognized planes, to associate them with corresponding building elements and to create BIM models. Based on the spatial relationships between these building elements, Module 3 generates a complete IFC model for the entire project compatible with any BIM software.

A case study validated the ASTB with an application with five common types of building elements (e.g. wall, floor, ceiling, window and door).

First, an integrated system, ASTB, is developed to generate a BIM model from scanned point cloud data without using additional modeling tools. Second, an enhanced plane boundary line detection method and a corner recalibration algorithm are developed in ASTB with high accuracy in obtaining the true surface planes. At last, the research contributes to develop a module, which can automatically convert the identified building elements into an IFC format based on the geometry and spatial relationships of each plan.

Additive manufacturing (AM) is growing economically because of its cost-effective design flexibility. However, it faces challenges such as interlaminar weaknesses and reduced strength because of product anisotropy. Therefore, the purpose of this study is to develop a methodology that integrates design for additive manufacturing (AM) principles with fused filament fabrication (FFF) to address these challenges, thereby enhancing product reliability and strength.

Developed through case analysis and literature review, this methodology focuses on design methodology for AM (DFAM) principles applied to FFF for high mechanical performance applications. A DFAM database is constructed to identify common requirements and establish design rules, validated through a case study.

Existing DFAM approaches often lack failure theory integration, especially in FFF, emphasizing mechanical characterizations over predictive failure analysis in functional parts. This methodology addresses this gap by enhancing product reliability through failure prediction in high-performance FFF applications.

While some DFAM methods exist for high-performance FFF, they are often specific cases. Existing DFAM methodologies typically apply broadly across AM processes without a specific focus on failure theories in functional parts. This methodology integrates FFF with a failure theory approach to strengthen product reliability in high-performance applications.

This study aims to address the limited understanding of the complex correlations among strut size, structural orientation and process parameters in selective laser melting (SLM)-fabricated lattice structures. By investigating the effects of crucial process parameters, strut diameter and angle on the microstructure and mechanical performance of AlSi10Mg struts, the research seeks to enhance the surface morphologies, microstructures and mechanical properties of AM lattice structures, enabling their application in various engineering fields, including medical science and space technologies.

This comprehensive study investigates SLM-fabricated AlSi10Mg strut structures, examining the effects of process parameters, strut diameter and angle on densification behavior and microstructural characteristics. By analyzing microstructure, geometrical properties, melt pool morphology and mechanical properties using optical microscopy, scanning electron microscope, energy dispersive X-ray spectroscopy and microhardness tests, the research addresses existing gaps in knowledge on fine lattice strut elements and their impact on surface morphology and microstructure.

The study revealed that laser energy, power density and strut inclination angle significantly impact the microstructure, geometrical properties and mechanical performance of SLM-produced AlSi10Mg struts. Findings insight enable the optimization of SLM process parameters to produce lattice structures with enhanced surface morphologies, microstructures and mechanical properties, paving the way for applications in medical science and space technologies.

This study uniquely investigates the effects of processing parameters, strut diameter and inclination angle on SLM-fabricated AlSi10Mg struts, focusing on fine lattice strut elements with diameters as small as 200 µm. Unlike existing literature, it delves into the complex correlations among strut size, structural orientation and process parameters to understand their impact on microstructure, geometrical imperfections and mechanical properties. The study provides novel insights that contribute to the optimization of SLM process parameters, moving beyond the typically recommended guidelines from powder or machine suppliers.

Architectural programming, as a critical phase in construction projects, has been widely recognized for its importance and advantages throughout the construction process. With the rapid development of the socioeconomic landscape, architectural programming has garnered increasing attention from various other disciplines, becoming a key trend in interdisciplinary collaboration. This study aims to provide a comprehensive understanding of the current status and future directions of architectural programming from an interdisciplinary perspective through scientometric analysis and systematic review.

This study first collected English journal articles on architectural programming published between 1975 and 2024 from the Web of Science and Scopus databases. After an initial screening of titles and abstracts, 515 articles were selected for scientometric analysis to reveal the current state and advantages of architectural programming research in multidisciplinary fields. Subsequently, a second screening of full-text articles identified 75 journal articles for systematic review, focusing on research topics and challenges in interdisciplinary applications.

The study reveals an exponential increase in the number of papers related to architectural programming between 1975 and 2024, particularly in the last decade. Six key research topics of architectural programming in multidisciplinary fields were identified: (1) performance optimization and evaluation, (2) digitalization and automation development, (3) project management and decision support, (4) improvement of human and social welfare, (5) sustainable resources and environment and (6) educational practices of architectural programming. Additionally, the study identified the main challenges in the interdisciplinary application of architectural programming, including (1) incompatibility among disciplines, (2) limitations of data and methodologies and (3) insufficient social engagement. To address these challenges, three potential future directions were proposed: (1) establishing interdisciplinary teams and platforms, (2) enhancing multi-source data integration and digital transformation and (3) improving governance mechanisms and educational training.

By combining quantitative and qualitative methods, this study provides a comprehensive review of architectural programming research and applications in multidisciplinary fields, offering theoretical foundations and practical references for the future development of architectural programming. This review not only aids in understanding the overall status of current architectural programming research but also offers valuable insights and recommendations for future research directions and practical applications.

The current study aims to develop a 3D-printed continuous metal fiber-reinforced recycled thermoplastic composite using an in-nozzle impregnation technique.

Recycled acrylonitrile butadiene styrene (RABS) plastic was blended with virgin ABS (VABS) plastic in a ratio of 60:40 weight proportion to develop a 3D printing filament that was used as a matrix material, while post-used continuous brass wire (CBW) was used as a reinforcement. 3D printing was done by using a self-customized print head to fabricate the flexural, compression and interlaminar shear stress (ILSS) test samples to evaluate the bending, compressive and ILSS properties of the build samples and compared with VABS and RABS-B samples. Moreover, the physical properties of the samples were also analyzed.

Upon three-point bend, compression and ILSS testing, it was found that RABS-B/CBW composite 3D printed with 0.7 mm layer width exhibited a notable improvement in maximum flexural load (L_max), flexural stress at maximum load (sf_max), flex modulus (E_f) and work of fracture (WOF), compression modulus (E_c) and ILSS properties by 30.5%, 49.6%, 88.4% 13.8, 21.6% and 30.3% respectively.

Limited research has been conducted on the in-nozzle impregnation technique for 3D printing metal fiber-reinforced recycled thermoplastic composites. Adopting this method holds the potential to create durable and high-strength sustainable composites suitable for engineering applications, thereby diminishing dependence on virgin materials.