Search results

Recently, the utilization of cold-formed steel (CFS) roof truss systems and different types of other combination structural support systems, such as concrete or hot-rolled steel support, becomes more frequently used. This paper aims to identify the load transfer characteristics of three different design details for cold-formed truss to supporting system connections and to propose simplified modelling approach for practices.

Simplification modelling of connection design could be proposed for practical purpose based on the load transfer characteristics obtained from detailed study using finite element method. A cold-formed roof truss system with connection is modelled using line elements. However, the supporting system is not modelled in this work. Three types of connection involve, which are five pieces of CFS L-angle brackets, one-piece of CFS L-angle brackets and three types of bolts connection are modelled.

The results of analysis show that the connections located on the loaded side experienced higher reactions than those far from loaded side. From the result, it is also found that the option of “Fixed But” support condition in STAAD.Pro with translational degree of freedom being restrained is the most suitable way to represent the CFS L-angle brackets design for Type 1 connection for use in truss modelled using line elements.

Such increase in usage necessitates an appropriate connection detailing depending on the behaviour of the connection.

The purpose of this study was to investigate the likely causes of failure of some sections of road pavements in Ajaokuta, Northcentral Nigeria. This was achieved through a geotechnical assessment of subgrade soils in affected areas.

The methods entailed field and laboratory methods and statistical analysis. Subgrade soil samples were retrieved from a depth of 1,000 mm beneath the failed portions using a hang auger. The soils were analyzed for natural moisture content (NMC), Atterberg limit (liquid limit, plastic limit and linear shrinkage), grain size distribution, compaction and California bearing ratio (CBR), respectively.

The results of the geotechnical tests ranged from NMC (12.5%–19.4%), sand (84%–98%), fines (2%–16%), LL (16.0%–32.2%), PL (17%–27.5%), LS (2.7%–6.4%), PI (2.5%–18.4%), maximum dry density (1756 kg/m2–1961 kg/m2), optimum moisture content (13.2%–20.2%), unsoaked CBR (15.5%–30.5%) and soaked CBR (8%–22%), respectively. Pearson’s correlation coefficient performed on the variables showed that some parameters exhibited a strong positive correlation with r2 > 0.5.

Funding was the main limitation.

Comparing the results with Nigerian standards for road construction, and the AASHTO classification scheme, the subgrade soils are competent and possess excellent to good properties. The soils also exhibited very low plasticity, a high percentage of sand, high CBR and low NMC, which implies that it has the strength required for road pavement subgrades. The likely causes of the failures are, therefore, due to the use of poor construction materials, technical incompetence and poor compaction of sub-base materials, respectively.

Most of the 3D printing machines do not comply with the requirements of on-site, large-scale multi-story building construction. This paper aims to propose the conceptualization of a tower crane (TC)-based 3D printing controlled by artificial intelligence (AI) as the first step towards a large 3D printing development for multi-story buildings. It also aims to overcome the most important limitation of additive manufacturing in the construction industry (the build volume) by exploiting the most important machine used in the field: TCs. It assesses the technology feasibility by investigating the accuracy reached in the printing process.

The research is composed of three main steps: firstly, the TC-based 3D printing concept is defined by proposing an aero-pendulum extruder stabilized by propellers to control the trajectory during the extrusion process; secondly, an AI-based system is defined to control both the crane and the extruder toolpath by exploiting deep reinforcement learning (DRL) control approach; thirdly the proposed framework is validated by simulating the dynamical system and analysing its performance.

The TC-based 3D printer can be effectively used for additive manufacturing in the construction industry. Both the TC and its extruder can be properly controlled by an AI-based control system. The paper shows the effectiveness of the aero-pendulum extruder controlled by AI demonstrated by simulations and validation. The AI-based control system allows for reaching an acceptable tolerance with respect to the ideal trajectory compared with the system tolerance without stabilization.

In related literature, scientific investigations concerning the use of crane systems for 3D printing and AI-based systems for control are completely missing. To the best of the authors’ knowledge, the proposed research demonstrates for the first time the effectiveness of this technology conceptualized and controlled with an intelligent DRL agent.

The results provide the first step towards the development of a new additive manufacturing system for multi-storey constructions exploiting the TC-based 3D printing. The demonstration of the conceptualization feasibility and the control system opens up new possibilities to activate experimental research for companies and research centres.

Nowadays, textiles play a striking role in various medical applications. Compression bandages are the most essential medical fabrics that help treat venous flow and edema. This study aims to investigate the characteristics of different woven compressive bandage structures produced using compact cotton and cotton/lycra.

Four samples were weaved by matt-plain2/2, twill2/2, stripe-stain4 and mock-leno structures. Several properties were tested that related to structural performance. Tensile strength, elastic and sub-bandage pressure are considered the main functional properties. Three different analysis tools were performed: chart-diagram, one-factor ANOVA and radar chart area.

The woven structures critically affected the performance of woven compression bandage samples as well as their classifications.

The woven structures critically affected the performance of woven compression bandage samples as well as their classifications.

Cold-formed steel has been used extensively as secondary elements such as purlins and girts in building frames. Purlin is critical to the structure of the roof because it supports the weight of the roof deck and aids to make the entire roof structure more rigid. Furthermore, cold-formed steel purlin is a replacement for wood purlin because steel purlins are light weight and more economical. Hence, the purpose of this study to investigate the effect of opening due to torsion behaviour.

This analysis used cold-formed steel hat purlin with and without openings (WOs) under different opening shape, location and spacing by using finite element LUSAS software.

The finite element results showed that purlin with openings had higher angle of rotation than section WO, with a percentage difference of not more than 6%. When the opening was located at mid-span, the angle of rotation reduced. Angle of rotation increased when the opening spacing increased. Number of openings also affected the torsional behaviour of the purlin. Five opening shapes, which were circle, diamond, C-hexagon, square and elongated circle, were studied. Among all the shapes, purlin with diamond opening was more resistance to torsion.

The use of cold-formed steel section with web openings (rectangular or circular) is a practical solution when it is required to pass service ducts through the structural member. However, the presence of opening gives minor effect on the structural behaviour of cold-formed steel hat purlin.

For construction organisations to be effective at implementing an integrated safety, health and environmental (SHE) management system, they require the right level of organisational capability. This capability includes the policies, systems and resources of the organisation. However, within the academic literature, it is unclear which organisational attributes of construction companies are important for implementing integrated SHE management. This study aims to explore the organisational attributes that determine integrated SHE management capability and their relative priorities.

The study used a literature review supported by expert verification and a subsequent three-round expert Delphi technique accompanied by applying the voting analytical hierarchy process.

The study identified 20 attributes grouped under five main thematic categories. These are strategy (the organisation’s vision and top management commitment); process (the organisation’s procedures and processes for SHE management); people (organisation’s human resources, their competence, roles, responsibilities and involvement in SHE management); resources (organisation’s physical and financial resources for SHE management) and information (SHE related documents, data, records and their communication across an organisation). While these thematic categories and the attributes within carry different weights of importance, the strategy-related attributes are the most important, followed by the people-related attributes.

The results of this study should enable construction companies and key industry stakeholders to understand construction companies’ capability to successfully implement an integrated SHE management system. Furthermore, construction companies should be able to prioritise efforts or investments to enhance their SHE management capability.

This paper aims to explain the implications of the impending establishment of national blockchain infrastructure by governments around the world, and how these structures can be integrated with existing legislation and assist in the prevention of financial crime.

The methodology used is a literature review and analysis of progress being made to establish national blockchain infrastructure. It provides a discussion of the connection between blockchain and financial crime, and how this infrastructure will interact with existing regulatory frameworks, and particularly, financial crime legislation.

This paper documents financial crime risks posed by digital currencies and smart contracts and the role that national blockchain infrastructure can potentially play in mitigating these risks. It highlights the need for governments to devote resources to developing this infrastructure and associated regulatory frameworks.

There are few, if any, academic papers in the financial crime, or wider literature, that have examined the potential for national blockchain infrastructures prevent financial crime, including the implications for existing regulation in the field.

Practitioners have reported a minimal and non-use of building information modelling (BIM), especially in small and medium-sized organisations and BIM infant construction industries. This development calls for a reappraisal of organisations’ strength in capabilities required for BIM uptake towards the target of global construction digitalisation. This study aims to assess the BIM Level 2 uptake capability of organisations in a BIM infant construction industry and identify the underlying interactions between the capability criteria.

The study used a multivariable analysis of fifteen descriptors identified from the people, process, policy, finance and technology domain. Data collection was done in the BIM infant construction industry in Nigeria. Verification of the descriptors and an evaluation of BIM uptake capability in organisations was done. Seventy-three responses were received within the selected context, and data analysis was done with mean weighting and exploratory factor analysis. Maximum Likelihood extraction and Direct Oblimin rotation were used.

Factor analysis revealed three factors that explained 53.28% of the total variance in the BIM Level 2 uptake capability of construction organisations. The factors are workforce capacity and continuous development, an affinity for innovation and strength in physical and operational facilities.

This study provides an overarching and insightful discussion on BIM uptake capability and construction digitalisation with evidence from a BIM-infant construction industry.

The findings of this study are a piece of valuable empirical evidence on Level 2 BIM uptake capability. This empirical situation analysis will inform the advocacy for the advancement of BIM and enhanced utilisation of building information. Evidence on the capability performance of the BIM infant industry has been revealed.

The outcome is expected to stir debate on the preparedness of organisations to further exploit the benefits of BIM in the BIM infant construction industry. Examination of the capability for a particular phase of BIM is scanty in the literature.

This study aims to explore the adoption of enterprise risk management (ERM) in developing and developed countries. Is there a similarity or difference between the two contrasting institutional markets and the reasons behind them?

The adoption of ERM is analyzed on the basis of the institutional framework. The author draws empirical evidence by comparing the cases of a British and an Indian insurance company using evidence from multiple sources. This paper focuses on extra-organizational pressures exerted by economic, social and political situations across two countries that influenced the adoption decision of ERM.

The findings of this research revealed that early adopters of ERM in different institutional markets face coercive and normative pressure but not mimetic pressure. The adoption of ERM in India and the UK is dissimilar. Companies in the British insurance market encounter higher institutional forces than those in the Indian market because of higher coercive and normative pressure. The aspirations to adopt ERM in the Indian and UK markets included improved strategic decision-making to maintain stakeholder expectations and higher standards of corporate governance. In the UK, ERM was adopted to reduce surprises and fluctuations under flexible regulations but with stricter adoption and to improve credit ratings.

Previous literature has discussed ERM adoption in similar markets or within one market with similar institutional pressure. In contrast, this research is a comparative study that explains the analysis of institutional theory in two different institutional environments in the adoption of ERM.

High levels of child obesity alongside rising stunting and the absence of a coherent food policy have deemed UK’s food system to be broken. The National Food Strategy (NFS) was debated intensely in media, with discussions on how and who should fix the food system.

Using a mixed methods approach, the authors conduct framing analysis on traditional media and sentiment analysis of twitter reactions to the NFS to identify frames used to shape food system policy interventions.

The study finds evidence that the media coverage of the NFS often utilised the tropes of “culture wars” shaping the debate of who is responsible to fix the food system – the government, the public or the industry. NFS recommendations were portrayed as issues of free choice to shift the debate away from government action correcting for market failure. In contrast, the industry was showcased as equipped to intervene on its own accord. Dietary recommendations made by the NFS were depicted as hurting the poor, painting a picture of helplessness and loss of control, while their voices were omitted and not represented in traditional media.

British media’s alignment with free market economic thinking has implications for food systems reform, as it deters the government from acting and relies on the invisible hand of the market to fix the system. Media firms should move beyond tropes of culture wars to discuss interventions that reform the structural causes of the UK’s broken food systems.

As traditional media coverage struggles to capture the diversity of public perception; the authors supplement framing analysis with sentiment analysis of Twitter data. To the best of our knowledge, no such media (and social media) analysis of the NFS has been conducted. The paper is also original as it extends our understanding of how media alignment with free market economic thinking has implications for food systems reform, as it deters the government from acting and relies on the invisible hand of the market to fix the system.